GE WMTS Specification Sheet
Contents
1. in full compliance with lamp ballast specifi cations available to the fixture manufacturer from the lamp manufacturers at the time of fixture manufacture The ballast shall reliably start and operate the lamp in ambient temperatures down to 20 F for mercury and metal halide and 40 F for HPS AREA LIGHTING OE EELLELEL Dy hs gt nar oe a TTA OPTICAL ASSEMBLY The optical assembly shall have an anodized aluminum reflec tor with an Alzakt finish impact heat resistant tempered pris matic borosilicate refractor and a heavy duty mogul base E39 socket FOR MORE DEFINITIVE INFORMATION REFER TO BALLAST SPECIFICATIONS IN TECHNICAL DATA SECTION Guide Form Specifications 2011 GE Lighting Solutions e 1 888 MY GE LED e www gelightingsolutions com 1 888 69 43 533 GE Lighting Solutions is a subsidiary of the General Electric Company Evolve and other trademarks belong to GE Lighting Solutions The GE brand and logo are trademarks of the General Electric Company 2011 GE Lighting Solutions Information provided is subject to change without notice All values are design or typical values when measured under laboratory conditions2. GE Lighting Solutions GUIDE FORM SPECIFICATIONS WALLMOUNT 400 LUMINAIRE GENERAL DESCRIPTION The totally enclosed weather resistant luminaire designated identify shall be a GE WALLMOUNT 400 luminaire ordering number specify WMTS plus ordering number logic from catalog or approved equal to operate one specify 250 or 400 watt high pressure sodium HPS halide mogul base lamp from a nominal specify 120 208 240 277 or 480 volt 60 Hertz power source The lumi naire shall include a completely prewired integral ballast and an optical assembly The luminaire shall be UL cUL Listed SUITABLE FOR WET LOCATIONS The luminaire shall be cUL for 120X347 volts Standard construction is IP55 or metal MECHANICAL CONSTRUCTION The luminaire shall include a die cast aluminum mounting plate housing and removable side hinged door with glass refractor sealed to it providing complete front access to ballast and lamp Die cast aluminum surfaces shall have a dark bronze paint finish Multiple junction box mounting patterns shall in clude provisions for 3 inch 83 mm octagonal or 2x4 inch 51x102 mm rectangular junction box The luminaire shall have provisions for a field installed photoelectric control kit BALLAST OPERATION The luminaire shall have a standard Autoreg ballast The ig nitor for HPS only and ballast shall be prewired to the lamp socket requiring connection of power supply leads only The ballast shall be
Download Pdf Manuals
Related Search