GE Easy Touch 681131066235 User's Manual
Contents
1. Easy Touch Can Opener Item Stock Number GE106623 UPC 681131066235 Can Opener Safety 2 Howto OpenCans 6 Know Your Can Opener 3 How to Sharpen Knives 7 Mounting Your Can Opener 3 Howto Open Bottles 7 Mounting Template 4 How to Clean Blade Assembly 7 Mounting Directions 4 Customer Assistance 8 For product service call customer service at 877 207 0923 GE106623 UPC 681131066235 Can Opener Safety IMPORTANT SAFEGUARDS In order to prevent the risk of fire electric shock burns or other injury or damage follow these instructions carefully When using electrical appliances basic safety precautions should always be followed including the following 1 Read all instructions 2 To protect against risk of electrical shock do not immerse cord plug or motor unit in water or other liquid 3 Close supervision is necessary when any appliance is used by or near children 4 Unplug from outlet when not in use before putting on or taking off parts and before cleaning 5 Avoid contacting moving parts 6 Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or damaged in any manner Call Customer Service Dept see warranty to return for examination repair or electrical or mechanical adjustment SAVE THESE INSTRUCTIONS 7 The use of attachments n2. and 3 Slowly and carefully move the bottle from right to left making sure the prying edge begins to separate the bottle cap from the bottle 4 If done correctly the bottle cap should now easily remove from the bottle How to Clean Blade Assembly 1 Unplug cord 2 Wipe can opener with a damp cloth Clean around blade area with toothpick or cotton swab if necessary HINT Cutting mechanism may collect food or paper from can labels and should be cleaned frequently to maintain optimum performance Two Year Limited Warranty What does your warranty cover Any defect in material or workmanship For how long after the original purchase Two years What will we do e Provide you with a new or at our option a reconditioned unit The exchange unit is warranted for the remainder of your product s original two year warranty period How do you make a warranty claim Return product to nearest WAL MART store or ship unit via UPS Ground Service CUSTOMER SERVICE DEPARTMENT 233 Fortune Blvd Milford MA 01757 All parts of this product are guaranteed for a period of two years as follows Within the first 24 months from date of purchase subject to the conditions below manufacturer will repair or replace the product if it is defective in workmanship providing it is returned to manufacturer freight prepaid with PROOF OF PURCHASE and date together with 5 00 for return shipping and han
3. dling charges Carefully pack the item in its original carton or other suitable box to avoid damage in shipping We recommend using the original carton and packing materials e Before packing your unit for return be sure to enclose your name full address with zip code and telephone number a dated sales receipt or PROOF OF PURCHASE if the unit was a gift provide a statement and the date received your 5 00 check for return shipping and handling and the model number of the unit and the problem you are having Enclose in an envelope and tape directly to the unit before the box is sealed Manufacturer recommends you ship the package U P S ground service for tracking purposes All shipping charges must be prepaid by you Ship to CUSTOMER SERVICE DEPARTMENT 233 Fortune Blvd Milford MA 01757 Shipping and handling charges 5 00 What does your warranty not cover Customer instruction This instruction manual provides information regarding operating instructions and user controls For additional information ask your dealer Commercial use Damage from misuse abuse or neglect Products which have been modified or incorporated into other products Products purchased or serviced outside the USA How does state law relate to this warranty This warranty gives you specific legal rights and you may also have other rights which vary from state to state What if you purcha
4. net without SNe Me eee cee me rl amet 2 em 10 Jaulqea jo apis Jaded jo ubljy 2s here ith overhang overhang How to Mount Can Opener The following parts are included for installing the can opener 4 Phillips recessed flat head screws 4 plastic washers 1 Cord clip 1 Template to position drilled holes provided Tools required 1 Drill with a 316 bit Phillips screwdriver Place the hole template provided on the bottom shelf of cabinet as directed Make sure it is face up and lined up with the front of the cabinet as indicated on the template Mark the center of the holes with sharp point by pushing through the crosshairs Remove the template and drill four e holes at marked points CAUTION Always use safety glasses when drilling to avoid injuries to eyes Keep the template for future use each screw and washer through the topside of the cabinet into the can opener holes See above drawing Make sure the cord is aligned through the slot on the back of the unit 3 A cord clip is provided to keep cord out of sight away from the work area Plug in and clip as desired To secure peel off paper backing of cord clip and press in place Surface must be clean dry and free of dust and grease NOTE Always leave can opener 2 Using the Phillips screwdriver insert unplugged when not in use How Open Cans 1 Plug cord into 120 vol
5. ot recommended or sold by the manufacturer may cause fire electric shock or injury 8 Do not use outdoors 9 Do not let cord hang over edge of table or counter or contact hot surfaces including the stove 10 Do not open pressurized aerosol type cans or cans of flammable liquids such as lighter fluids 11 Do not mount the unit over or near any portion of a heating or cooking appliance or a sink or basin 12 To reduce the risk of fire or electric shock do not operate any heating appliance beneath the mounted unit Consumer Safety Information THIS APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY This appliance has a polarized plug one blade is wider than the other As a safety feature this plug will fit in a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit contact a qualified electrician Do not attempt to defeat this safety feature CAUTION To reduce the risk of electric shock do not immerse the can opener in water Know Your Can Opener Parts and Features 1 Piercing Lever 2 Cutting Blade 3 Feed Wheel 4 Can Rest 5 Knife Sharpener 6 Bottle Opener Mounting Your Can Opener Where To Mount Your Can Opener Your can opener is designed to be installed under a cabinet Do not attempt to open cans until it has been properl
6. sed this product in the USA and encounter a problem while using it outside the USA e Follow the shipping directions provided for warranty claims For products purchased outside the United States and Canada see dealer for warranty WALX MART Stores Inc Bentonville AK 72716 is a trademark of General Electric Company and is used under the license by WAL MART Stores Inc Bentonville AR 72716 WAL MART Stores Inc 428 945 106623 8 Bentonville AR 72716 6 00
7. t AC outlet completely 2 Raise piercing lever tilt can so that severed the rim of the can rests on the edge To remove of the feed wheel lower the lever can grasp until the blade pierces the can can firmly 3 Press lever down all the way to pierce and raise lid and start cutting action Power lever Pierce feature When you press Carefully lever motor will start rotating can for easier piercing slide lid from magnet and dispose of properly PLEASE NOTE Unit will not open rimless cans If there is a dent in the rim of the can open other end Never open or eat the contents of a dented bulging or punctured can 4 Let go of lever and can opener will continue cutting and will stop automatically when can has been opened It is normal for motor to occasionally continue cutting action for a few seconds after lid has been How to Sharpen Knives Do not attempt to sharpen hollow ground blades or those with serrated edges 1 Be sure knife is clean and free of grease 2 Place heel of knife into the guide slot located on the left side of the can opener Lightly draw the blade towards you applying a slight downward pressure Repeat this procedure four to five times to put on a factory sharp edge How to Open Bottles Insert bottle into bottle opener making sure the prying edge is placed between the edge of the bottle cap and the top of the bottle 2 Grasp bottle tightly with one h
8. y mounted Hints For Selecting Location Can opener may be mounted under the cord does not come in contact wood or metal cabinets Do not with other appliances or workspace attempt to open cans until it has Do not mount can opener over been properly mounted sink range or other heating Hold can opener in various appliance or operate any heating locations making sure to allow room appliance beneath the can opener for operation of lever and bottle opener Evaluate its appearance and convenience keeping in mind your normal kitchen routine Locate near an electrical outlet so Mounting Directions 1 Cabinet with overhang 2 Mark the center of the four holes Fold the template along the dashed through the template using a sharp line Line up the edge of the point nail or awl template to the edge of the cabinet 3 Remove template and drill four on the underside then tape in 3 16 holes where marked place CAUTION Always use safety glasses when drilling to avoid eye injury Cabinet without overhang Fold template along the outside edge of the bold line Line up the edge of template to the edge of the cabinet on the underside then tape in place cut here r Y MOUNTING TEMPLATE 2559inches Mark the CENTER of the hole C Align edge of paper with side of cabinet or wall Front edge of cabinet v Align edge of paper with front edge of cabi
Download Pdf Manuals
Related Search