Home

FUNAI MBP5120F/F7 User's Manual

1. Allow Internet access is permitted for all BD Live contents Limited Allow Internet access is permitted only for BD Live contents which have content owner certificates Internet access without the certificates is prohibited Prohibit Internet access is prohibited for all BD Live contents 3 Press RETURN to go back to the previous screen or press SETUP to exit MAC Address You can check the MAC address of this unit MAC Address is for viewing only m Wireless If you connect this unit to the network wirelessly select Wireless and set up necessary settings lt Wireless Router gt In order to use a wireless network you must set up the connection to the wireless router Find wireless network Search for wireless networks automatically and select the wireless network name SSID from the list 1 In Network Connection menu use A V to select Network Selection then press OK 2 Use A V to select Wireless then press OK 3 Use A V to select Wireless Router then press OK 4 Use A V to select Find wireless network then press OK e This unit will start searching for wireless networks automatically 5 The list of wireless networks will be displayed Use A V to select the appropriate wireless network name SSID then press OK This unit will start searching for the authentication setting of the selected wireless network automa
2. Primary Subtitle Sets the subtitle for the primary video Secondary Subtitle Sets the subtitle for the secondary video Sets style of the subtitle 3 Use A V to select your desired subtitle or style Use lt gt to switch between current subtitle setting and Off 4 Press SUBTITLE to exit Ow 1 During playback press SUBTITLE 2 Use A V to select your desired subtitle Use lt gt to switch between current subtitle setting and Off EG 4a 3 Press SUBTITLE to exit Subtitle Style 23 Note Some discs will only allow you to change the subtitles from the disc menu or pop up menu Press TOP MENU or POP MENU MENU to display the disc menu or pop up menu If 4 digit language code appears in the subtitle menu refer to Language Code List on page 45 e Ifthe disc has no subtitle language or subtitle style Not Available will be displayed on the TV screen e During playback of the secondary video the primary subtitle setting is not available except when there is no subtitle for the secondary video e If you select a language that has a 3 letter language code the code will be displayed every time you change the subtitle language setting If you select any other languages will be displayed instead Refer to page 45 Switching Audio Soundtrack When playing back video material recorded with 2 or more soundtracks these are o
3. Owner s Manual MAGNAVOX MBP5120F F7 Blu ray Disc DVD Player 2010 Funai Electric Co Ltd Am INTRODUCTION Safety Instructions The model and serial numbers Model No of this unit may be found on the cabinet You should record and retain Serial No those numbers for future reference WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON THE APPARATUS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The important note is located on the rear or bottom of the cabinet The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance Cl the symbol for CLASS Il Double Insulation IMPORTANT SAFETY INS
4. Refer to IP Address Setting DNS Setting on page 37 Proxy Setting Refer to Proxy Setting on page 37 BD Live Setting Refer to BD Live Setting on page 38 MAC Address Refer to MAC Address on page 38 Note You cannot select Advanced Settings if Wireless Router setting is not completed m Disable Deactivate all the network connection and settings 1 In Network Connection menu use A V to select Network Selection then press OK 2 Use A V to select Disable then press OK 3 Press RETURN to go back to the previous screen or press SETUP to exit Note The network connection can be reactivated by setting network connection to Wired or Wireless Software Update SETUP gt ffA gt Other gt Software Update This unit lets you update the software yourself using a software update disc To update the software you must first download the latest version software to a disc then execute Software Update Current Version You can confirm the current software version 1 In Software Update menu use A V to select Current Version then press OK 2 Press OK or RETURN to exit m Disc Update 1 Prepare a software update disc Access www magnavox com and download the latest version software to a blank disc by following the directions described on the site e Use a blank disc an
5. e Wireless Network Connection Guide e VUDU sheet 2010 Funai Electric Co Ltd All rights reserved No part of this manual may be reproduced copied transmitted disseminated transcribed downloaded or stored in any storage medium in any form or for any purpose without the express prior written consent of Funai Furthermore any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited Information in this document is subject to change without notice Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes UNAI with the design is a registered trademark of Funai Electric Co Ltd and may not be used in any way without the express written consent of Funai All other trademarks used herein remain the exclusive property of their respective owners Nothing contained in this manual should be construed as granting by implication or otherwise any license or right to use any of the trademarks displayed herein Misuse of any trademarks or any other content in this manual is strictly prohibited Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law CONTENTS INTRODUCTION Safety Instructions Supplied Accessories Trademark Information Front Panel Rear Panel Remote Control Installing the Batteries in the Remote Control Opening Screen CONNECTIONS Co
6. Note Wired connection is recommended when using following features Using following features with wireless connection can be affected by other devices using radio frequencies Video streaming services VUDU Network update Wired Connection Make the following connection if you are using a wired router Hub or broadband router Networking equipment 0000000900 ol modem etc Sg M Ss WAN LAN ELLI LAN cable not supplied LAN cable not supplied Internet m TNT ki u Note After you made a wired connection set up necessary network settings For network setting of wired connection refer to Wired on page 36 e Do not insert any cable other than a LAN cable to the LAN terminal to avoid damaging the unit If your network equipment modem etc does not have broadband router functions connect a wired broadband router If your network equipment modem etc has broadband router functions but there is no vacant port use a hub Fora wired broadband router use a router which supports 10BASE T 100BASE TX Do not connect your PC directly to the LAN terminal of this unit Please purchase shielded LAN cables at your local store and use them when you connect to network equipment 12 Wireless Connection Make the following connection if you are using a wireless router Network
7. Unrecognizable characters will be replaced with asterisks Some unplayable folders or files may be listed due to the recording status e High resolution JPEG files take longer to be displayed Progressive JPEG files JPEG files saved in progressive format cannot be played back in this unit The system can recognize up to 255 folders 999 files for CD 999 folders 9 999 files for BD DVD and SD Memory Card The 9th and deeper hierarchies cannot be displayed for CD The 10th and deeper hierarchies cannot be displayed for BD DVD and SD Memory Card For the SD Memory Card playback refer to Reading the SD Memory Card on page 16 Extension other than listed below cannot be recognized JPEG jpg jpeg With regard to the multi border BD RE R additionally recorded sections cannot be recognized e With regard to the multi border DVD RW R additionally recorded sections may not be recognized 18 KODAK Picture CD This unit can also run JPEG files stored on KODAK Picture CD You can enjoy picture images on the TV set by playing back the KODAK Picture CD This unit conforms to ver 7 0 of KODAK Picture CD For details of KODAK Picture CD contact a shop that provides developing service of Kodak Inc 1 When KODAK Picture CD is inserted in this unit KODAK Picture CD menu will appear automatically on the TV screen Thumbnail Pictures 1 File information 2 Current page T
8. to select Agree then press OK 2 Use a W lt 4 gt to select VUDU movies then press OK VUDU welcome screen will appear 3 Select SIGN Up Now then press OK 4 Enter the e mail address you would like associated with your VUDU account After you enter your e mail address correctly select Done and press OK Activation e mail will be sent to the e mail address You must have access to the e mail address to activate VUDU 5 Follow directions in the activation e mail to complete your account activation Note You can deactivate the connection to VUDU by setting Vudu Deactivate to Yes Refer to page 42 For questions regarding VUDU service please contact VUDU Customer Care at 1 888 554 VUDU 8838 or visit www vudu com support Guide to VUDU Menu Screen E App Home Screen App Home screen is the entry point to VUDU applications including VUDU movies To call up the screen press RED while opening screen is displayed 1 Viewing mode List of different viewing modes for App Home applications 2 Promotional Placeholder where graphics promotional graphics are displayed selected viewing mode m VUDU Movies Home Screen When you select VUDU movies in App Home screen VUDU movies home screen will appear 1 2 3 4 Most New Watched on Vudu Explore Catalog 1 Most Watched To access the list of popular movies TV episodes
9. 1 Follow steps 1 to 3 in Find wireless network on page 39 2 Use A V to select Wireless Router Status then press OK The list of current wireless router settings and the confirmation message will appear Select Yes to complete the settings 3 Press RETURN to go back to the previous screen or press SETUP to exit lt Advanced Settings gt After you set up the Wireless Router setting set the network setting to Easy wireless or Custom wireless 40 Easy wireless To set the network setting to Easy wireless follow the following procedure For details of this setting refer to Easy Wired on page 36 e If you select Yes in step 7 of Find wireless network on page 39 skip to step 3 1 Follow steps 1 to 2 in Find wireless network on page 39 2 Use A V to select Advanced Settings then press OK 3 Use A V to select Easy then press OK Custom wireless To set the network setting to Custom wireless follow the following procedure e If you select Yes in step 7 of Find wireless network on page 39 skip to step 3 1 Follow steps 1 to 2 in Find wireless network on page 39 2 Use A V to select Advanced Settings then press OK 3 Use A V to select Custom then press OK e For details of each setting refer to following pages IP Address Setting DNS Setting
10. 1080p24 frame input Even if the connected TV is compatible with 1080p24 frame input and you set HDMI Video Resolution setting to Auto when the contents of the disc are not compatible for 1080p24 frame 1080p60 frame will be output If the picture is not output properly to the TV because of HDMI Video Resolution press and hold gt PLAY on the front panel for more than 5 seconds Both settings will be reset to the default automatically 28 BD Audio Mode HDMI Audio Out 1 Down Sampling Audio BD Audio Mode Mix Audio Output HDMI Audio Out gt Down Sampling gt DRC HDMI Multi Normal To select the setting items and options refer to WA Custom on page 27 Quick menu consists of the setting menus frequently used and they are accompanied with 2 Setting items Descriptions For BD selects whether to output the secondary and interactive audio with primary audio if it is available or only the primary audio Refer to Setting the BD Audio Mode on page 24 Sets the audio format for the audio output from HDMI OUT jack Refer to page 29 Sets the digital audio output when playing back BD or DVD recorded in LPCM Sets whether to compress the range of sound volume dynamic range control when Dolby Digital Dolby Digital Plus or Dolby TrueHD audio is played back When Auto is selected this unit detects DRC setting of the disc and set DRC setti
11. 7 1 channel 5 1 channel surround To make the most of its feature set up your speakers appropriately by referring to the following table How to navigate through HDMI Multi LPCM 1 Use A V to select your desired menu item then press OK 2 Use A V to select your setting items Press RETURN to go back to the previous screen Riera SHS fm ch right 3 Use lt gt to select desired options Except g for Test Tone Default and setting options in g fsa Speaker Size setting For setting options in Speaker Size setting Press OK to select desired options Center speaker sf For Test Tone Use lt gt to select Off Manual or Auto then press OK Surround Surround The test tone will be output If you select PTE speaker Mgnt Manual use A V to select desired speaker then use lt 4 to adjust the volume If you Surround Surround select Auto use lt 4 to adjust the volume of back speaker back speaker left right the speaker that outputs the test tone j i If you want to stop the test tone press RETURN e g basic layout with 7 1 channel surround system For Default Press OK to reset to the default 4 Press SETUP to exit lt Speaker setting for the audio signal output from HDMI OUT jack gt Quick gt HDMI Audio Out gt HDMI Multi LPCM i Custom gt Audio gt HDMI Audio Out
12. Code Greenlandic 5758 Marathi 5964 Swahili 6569 Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali Bangla Bhutani Bihari Bislama Breton Bulgarian BUL Burmese Byelorussian Cambodian Catalan Chinese CHI Corsican Croatian Czech CZE Danish DAN Dutch DUT English ENG Esperanto Estonian Faroese Fiji Finnish FIN Note 5471 4765 4771 4772 4847 5167 4860 5072 4854 4855 4864 4853 5971 4851 5759 4947 7254 4961 5464 4965 5047 6058 5160 5161 5166 5261 5256 5255 Guarani 5360 Moldavian 5961 Swedish SWE 65681 aungzanrrun se NOOR ET con Go frs 6 Javanese soso meme SNS CO 2 nterlingua 5547 Panjabi 6247 Tigrinya 6655 Kirundi 6460 Sanskrit 6547 Welsh 4971 Korean KOR 5761 Scots Gaelic 5350 Wolof 6961 D c ur ss rad 56 lawawzoh ses sn amp w h 5 fsnm 650 If you choose a language that has a 3 letter language code written in bracket the code will be displayed every time you change the audio setting on page 24 or subtitle language setting on page 23 If you choose any other languages will be displayed instead Servicing e Please refer to relevant topics on Troubleshooting on page 43 before returning the product e If this unit becomes inoperative do not try to correct the problem by yourself There are no user serviceable parts inside Turn the unit to the standby mode unplug the power plug and
13. Even if you turn the unit to the standby mode in SD Card or Network mode it will be in Disc mode the next time you turn it on Playing Back BD DVD 1 Press STANDBY ON 2 Turn on the TV and select the appropriate input on the TV to which the unit is connected 3 Insert a disc refer to How to Insert a Disc on page 15 4 Playback may start automatically If not press gt play Some discs may show a title or a disc menu In such case refer to Using the Title Disc Pop up Menu on page 17 To pause playback Press Il pause To return to the normal playback Press gt play To stop playback Press M stop Playback will be in Resume On Stop mode Resume On Stop mode If a playback is in Resume On Stop mode when you press D gt play next time the playback will start from the point where it has been stopped Note Resume playback may not be available for the BD that supports Java applications BD Java Inthe Disc mode the resume information will be cleared when M stop is pressed while in the Resume On Stop mode the parental level is changed the disc tray is opened Inthe SD Card mode the resume information will be cleared when M stop is pressed while in the Resume On Stop mode the SD Memory Card is removed the unit is turned into the standby mode Note O may appear at the top right on th
14. The angle cannot be switched for BD DVD which do not contain multiple angles In some cases multiple angles are only recorded for specific scenes Playback does not start when Check the settings in Parental menu the title is selected Enter the default password 4737 then your forgotten password will has been forgotten be cleared Cannot connect to the Check if the LAN cable connection is properly made network Turn on the modem or broadband router Check the network setting Check if the broadband router and or modem is correctly connected Check the BD Live Setting When connecting directly to a modem via a LAN cable you might need to power cycle the modem to reset settings on the modem Cannot use the wireless Once you have activated the wireless connection please wait 30 connection seconds for the connection to be established after turning on the unit before trying to access network features such as BD Live or VUDU Cannot connect to the Check the content of your Internet service contract to see if your network while my PC is Internet service provider prevents multiple terminals connecting at connected to the network the same time decreased virtual package is used and an SD card is in the slot Cannot use the BD Live Insert an SD card with enough capacity 1GB or more function or download of data Check if an SD card is correctly inserted does not perform properly Make sure the write
15. are prohibited Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning pulling standing or climbing on it A falling unit can cause serious injury or even death This apparatus should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided Make sure to leave a space of 3 9 inches 10cm Or more around this apparatus To Avoid the Hazards of Electrical Shock and Fire e Do not handle the AC power cord with wet hands Do not pull on the AC power cord when disconnecting it from an AC outlet Grasp it by the plug Do not put your fingers or objects into the unit Location and Handling e Do not install the unit in direct sunlight near strong magnetic fields or in a place subject to dust or strong vibration e Avoid a place with drastic temperature changes e Install the unit in a horizontal and stable position Do not place anything directly on top or bottom of the unit Depending on your external devices noise or disturbance of the picture and or sound may be generated if the unit is placed too close to them In this case please ensure enough space between the external devices and the unit Depending on the environment the temperature of this unit may increase slightly This is not a malfunction Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit Dew Condensation War
16. complete the settings Others Wireless Router Is Setting OK SSID API WEP WPA Authentication WPA2 PSK AES WEP WPA Key SABES lp No 8 Following screen will appear Use A V to select Yes then press OK to go to Advanced Settings For further operation refer to Advanced Settings on page 40 Others Find wireless network Wireless router settings are incomplete Please use Advanced Settings to complete your setup 9 Press SETUP to exit Note For a wireless network with authentication setting key icon appears to the right hand of the wireless network name SSID Signal icon shows the strength of the signal WEP WPA key appears as asterisks on the confirmation screen 39 Manually enter your SSID Set up the connection to the wireless router manually by entering the wireless network name SSID 1 Follow steps 1 to 3 in Find wireless network on page 39 2 Use A V to select Manually enter your SSID then press OK e Wireless Router Name SSID entry screen will appear Enter the wireless network name SSID using cursor buttons number buttons and color key then press YELLOW Others Manually enter your SSID Wireless Router Name SSID e List of authentication settings will appear 3 Follow steps 6 to 9 in Find wireless network on page 39 Wireless Router Status You can check the current status of Wireless Router setting
17. gt HDMI Multi LPCM Menu Setting items Descriptions Speaker sie SRE Selects the desired speaker to For the large speakers with strong set Then change the setting by low frequency reproduction referring to the descriptions Siiioiirid Se Small Surround Back For the small speakers which do not provide strong bass sound You cannot change the setting of Subwoofer Speakers which are not supported by the connected Select Default then press OK to reset Speaker Size setting to the default 30 Setting items Descriptions Select Off to deactivate Test Tests or sets the volume for each Test Tone is the test tone which Tone Select Manual then press speaker can be output from the speakers OK to manually set the volume for so you can adjust the volume for the desired speaker each speaker Select Auto then press OK to automatically output the test tone from each speaker If you have selected Manual in Test Tone select the desired ubwoofer speaker to set and adjust the ront Rch volume for the selected speaker If you select Auto in Test Tone test tone will automatically be output urround Back Rch in order Adjust the volume of the urround Back Lch speaker that outputs the test tone urround Lch Select Default then press OK to reset Channel Level setting to the default Delay Time i Set the desired measure system This is a
18. iSO jcscsssssssosssecssnsssaccacasavescassai acaasassencasspcbotaissctenatznatoons Using Internet Applications FUNCTION SETUP 2 Quick Audio HDMI Audio Out Setting Digital Out Setting Speaker Setting Available when you have HDMI cable connected to HDMI OUT jack Parental Others fun Link HDMI CEC Network Connection Connection Test Network Selection Software Update Current Version Initialize OTHERS on Troubleshooting Language Code List Servicing Specifications NETWORK SERVICE DISCLAIMER Network Service Disclaimer LIMITED WARRANTY back cover Trademark Information Hom HIGH DEFINITION MULTIMEDIA INTERFACE CX DOLBY TRUE DIGITAL PLUS dts uD Advanced Digital Out ava POWERED HDMI the HDMI Logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Manufactured under license under U S Patent s 5 451 942 5 956 674 5 974 380 5 978 762 6 487 535 amp other U S and worldwide patents issued amp pending DTS and the Symbol are registered trademarks amp DTS HD DTS HD Advanced Digital Out and the DTS logos are trademarks of DTS Inc Product includes software DTS Inc A
19. inactive all discs can played back 8 Adult DVD software of any grades adult general children can be played back 7 INC 17 No one under 18 admitted 6 R Restricted under 18 requires accompanying parent or adult guardian 5 PGR Parental guidance recommended 4 PG 13 Unsuitable for children under 13 3 PG Parental guidance suggested 2 G General audience 1 Kid Safe Suitable for children C Password Change 1 Use A w to select Password Change then press OK 2 Enter a new 4 digit password then press OK 3 Press SETUP to exit 32 Others Others angle con fon fun Link HDMI CEC Off Mode Select Disc Network Connection Software Update To select the setting items and options refer to 7A Custom on page 27 Quick menu consists of the setting menus frequently used and they are accompanied with 2 e Settings with are the default Setting items Options Descriptions function Refer to page 35 Disc Select this when you play back a disc SD Card Select this when you play back an SD Memory Card Network Select this when you use VUDU feature Selects the media to playback 33 Setting items Options Descriptions Network Connection Perform a network connection Connection test After you change IP address Refer to page or DNS setting always perform 36 for more this test information i If you select Easy connection Selection
20. its label side facing up 27 Align the disc to the disc tray guide e Make sure the disc is compatible with this unit Refer to page 14 for the list of compatible discs 3 Press OPEN CLOSE 4 to close the disc tray It may take a while to load the disc To eject the disc Press OPEN CLOSE 4 to open the disc tray Remove the disc Press OPEN CLOSE 4 to close the disc tray 15 Reading the SD Memory Card You can play back the JPEG files in an SD Memory Card With the SD Memory Card you can also enjoy the following functions Special additional contents for BD ROM Profile 1 ver 1 1 For more information about the special additional contents refer to the instruction book that came with the disc BD Live function BD ROM ver 2 Profile 2 0 For more information about BD Live refer to page 22 1 Insert an SD Memory Card with the label side facing up into the SD card slot until it clicks If no disc is in operation Media Select screen will appear on the TV screen 2 Use A V to select SD Card then press OK 3 Use A V to select a desired track folder or file then press OK Use lt gt to go backward and forward between the hierarchies If you press OK on the desired file playback will start To remove the SD Memory Card In stop mode gently push in the SD Memory Card then pull it out slowly Note The Media Select screen will disappear und
21. on VUDU 2 New on Vudu To access the list of newly available movies TV episodes 3 Explore Catalog To access the list of options to search movies TV episodes purchased contents Note You can go back to VUDU movies home screen by pressing BLUE while you are using VUDU movies features 25 Renting or Purchasing VUDU Movies TV Episodes After activating this unit you are ready to purchase or rent movies TV episodes and watch directly on your TV 1 Press RED while opening screen is displayed For opening screen refer to page 9 2 Use A W lt 4 gt to select VUDU movies then press OK VUDU movies home screen will appear 3 Use A V lt 4 gt to select Most Watched New on Vudu or Explore Catalog then press OK 4 Use A 4 gt to select the desired movie or TV episode then press OK e MOVIE DETAILS screen will appear 5 Use A V to select Rent or Own then press OK 6 Use A V to select a desired quality option then press OK e Select the quality option that best suits your network environment ___ Video Resolution Minimum Bit Rate 7 Use A V to select Rent for or Buy for then press OK to confirm your rental or purchase 8 Select Watch Now to start playing the movie TV episode If you want to return to the MOVIE DETAILS select Watch Later Note e Available
22. please contact 1 800 605 8610 or visit www magnavox com support www funaiservice com 45 Specifications Signal system NTSC color Power requirements 120 V AC 60 Hz Power consumption 16 W standby 0 5 W Dimensions width x height x depth 14 2 x 2 0 x 8 5 inches 360 x 50 x 214 5mm Weight 4 04 Ibs 1 83 kg Operating temperature 41 F 5 C to 104 F 40 C Operating humidity Less than 80 no condensation Video output RCA jack x 1 1 Vp p 750 HDMI output HDMI jack x 1 Video 480p 720p 1080i 1080p 1080p24 Audio Audio output Analog RCA jack x 2 L R 2 Vrms output impedance more than 1kQ Audio output Digital RCA jack x 1 500 mVp p 750 LAN terminal 10BASE T 100BASE TX Wireless LAN IEEE 802 11 b g n Note The specifications and design of this product are subject to change without notice NETWORK SERVICE DISCLAIMER Network Service Disclaimer Content and services made available through this product are transmitted by third parties by means of networks and transmission facilities over which Company has no control and third party services may be terminated or interrupted at any time and Company makes no representation or warranty that any content or service will remain available for any period of time Without limiting the generality of this disclaimer Company expressly disclaims any responsibility for any interruption or suspension of any content or service made available through this
23. setting Proxy Setting Set the proxy server In most cases you can connect to the Internet without using proxy server BD Live Setting You can restrict Internet access eS lt eee BD Live functions are used MAC MAC Address You can check the MAC address You can check the MAC address Disable Deactivate the network connection RS mm disclaimer 34 Setting items Options Descriptions Software Update Current Version Allows you to Indicates the current firmware version update this units Disc Update No firmware Refer to Allows you page 41 to update this unit s software using a disc Network Update Yes You can update the software version by connecting this unit to the Internet fun Link HDMI CEC fun Link HDMI CEC allows integrated system control over HDMI and is part of the HDMI standard This function may not work properly depending on a device to be connected When fun Link HDMI CEC setting is set to On functions listed below will be available One Touch Play When this unit is turned on the TV also is turned on and the appropriate external input channel will be selected automatically The appropriate external input channel can also be selected on your TV automatically when you press gt play 44 skip gt P skip the Number buttons DISPLAY TOP MENU or POP MENU MENU when the unit s power is on Buttons other
24. the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped FCC WARNING This equipment may generate or use radio frequency energy Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual The user could lose the authority to operate this equipment if an unauthorized change or modification is made NAM B W N gt RADIO TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenn
25. the unit is connected to the Internet For network connection refer to page 36 Examples of BD Live features e Online access to additional content such as movie trailers subtitles BD Java applications etc While downloading special video data may be played back m How to Activate the BD Live Function 1 Insert the disc with BD Live function 2 Insert an SD card with enough capacity SD card of 1GB or more is recommended e Make sure to use the SD card with the supported file system Refer to Reading the SD Memory Card on page 16 3 Press TOP MENU to access the disc menu 4 Select BD Live then press gt play or OK Make sure the SD card is correctly inserted and do not remove the card during playback e Service and functions differ depending on the disc Follow the instructions given by the disc when using the BD Live function Note You must connect the unit to the Internet and set up necessary settings in order to use BD Live For certain discs BD Live Setting may need to be changed Depending on your connection environment it may take time to connect to the Internet or the Internet may not be connected When BD Live functions are used and the unit is connected to the Internet you may be charged for this communication While connecting to BD Live sometimes it can take awhile before the next page is downloaded or refreshed Some discs with BD Live function
26. Custom then press OK Setting menu of Custom wired will be displayed 3 Use A V to highlight the item you want to set e MAC Address is for viewing only and cannot be selected 4 Find the instruction for the item from the following and set the item IP Address Setting DNS Setting 1 Press OK repeatedly to select the desired setting Auto DHCP If your router has DHCP server function select Auto DHCP Manual If your router does not have DHCP server function select Manual If you select Manual follow the following instruction to set the IP address and DNS a Use A V to select IP Address Subnet Mask or Default Gateway then press OK IP address setting screen will appear Enter IP address subnet mask and default gateway with cursor buttons and number buttons Others IP Address Setting IP Address XXX XXX XXX Subnet Mask XXX XXX XXX XXX Default Gateway XXX XXX XXX XXX gt then press OK Enter the IP address number after checking the specifications of your router If the IP address is unknown check the IP address of other devices e g PC connected via LAN cable and assign a different number from those of other devices b After you enter all correctly press OK Confirmation message will appear Select Yes to complete the settings Others IP Address Setting Is Setting OK
27. IP Address Subnet Mask Default Gateway gt No Yes XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX c Use A V to select Primary DNS or Secondary DNS then press OK DNS setting screen will appear Enter primary DNS and secondary DNS with cursor buttons and number buttons Others DNS Setting Primary DNS XXX XXX XXX Secondary DNS XXX XXX XXX XXX 4 then press OK Enter the DNS addresses provided by your Internet provider If the DNS address is unknown check the DNS address of other devices e g PC connected via LAN cable and assign the same DNS address d After you enter all correctly press OK Confirmation message will appear Select Yes to complete the settings 2 Press RETURN to go back to the previous screen or press SETUP to exit Note The range of input numbers is between 0 and 255 If you enter a number larger than 255 the number will automatically be 255 The manually entered addresses will be saved even if you change the setting to Auto DHCP When you enter a wrong number press CLEAR to cancel The number will be back to 0 If you want to enter 1 or 2 digit number in one cell press gt to move on to the next cell Ifthe entered IP address or the default gateway or primary DNS addresses is same as the default setting IP address setting will be set to Auto DHCP The manually entered number will be s
28. IS ATTACHED THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED IMPORTANT THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE IF AT ANY TIME DURING THE WARRANTY PERIOD YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT PLEASE CONTACT FUNAI CORP ATTENTION FUNAI CORP RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS To obtain warranty service you must take the product or deliver the product freight prepaid in either its original packaging or packaging affording an equal degree of protection to any AUTHORIZED SERVICE CENTER FUNAI CORP will not reimburse you for any service done by unauthorized service providers without prior written approval To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries please contact us at FUNAI SERVICE CORPORATION Tel 1 800 605 8610 WWW magnavox com support www funaiservice com 2200 Spiegel Drive Groveport OH 43125 Printed in China 1VMN29959 A
29. TRUCTIONS Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid INE injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when
30. W Setting Some BD videos have the PIP function which enables you to display the secondary video in the primary video You can call up the secondary video by pressing MODE whenever the scene contains the secondary video primary video secondary video 7 1 During playback press MODE repeatedly until the PIP function appears 2 Use A V to select the secondary video you want The secondary video will be displayed and the secondary audio will be output Use lt gt to switch between current setting and Off 3 Press RETURN or MODE to remove the PIP information Note The secondary audio will not be output when the secondary audio is set to Off or when BD Audio Mode is set to HD Audio Output Refer to Switching Audio Soundtrack on page 24 and Setting the BD Audio Mode on page 24 Camera Angle Some BD videos and DVD videos contain scenes which have been shot simultaneously from various angles You can change the camera angle when appears on the TV screen 1 During playback press ANGLE e The selected angle will be displayed on the display bar at the top of the TV screen 2 Use A V to select your desired angle o Note e If Angle Icon setting is Off in Others menu x will not appear Refer to page 33 22 Enjoying BD Live Discs with Internet You can enjoy BD Live which enables you to use interactive features when
31. Z test will automatically start Custom IP Address Auto DHCP Set the IP address In most cases Setting P Address you can connect to the Internet Subnet Mask Without making any changes to the default setting DNS Setting Auto DHCP Set the DNS setting In most cases you can connect to the Internet without making any changes to the default setting Proxy Do Not Use Set the proxy server In most Setting Use Proxy Address cases you can connect to the Proxy Port Internet without using proxy server Connection Auto Set the connection speed In Speed most cases you can connect to the Internet without making any changes to the default setting BD Live You can restrict Internet access Setting when BD Live functions are used MAC Address You can check the MAC address Wireless Find wireless WEP WPA Authentication Set up the connection to the Router network wireless router and enter the Manually WEP WPA key required for enter your wireless network connection SSID Wireless Router Status You can check the current status of the wireless router setting Advanced Easy If you select Easy connection Settings test will automatically start Custom IP Address Setting Set the IP address In most cases you can connect to the Internet without making any changes to the default setting DNS Setting Set the DNS setting In most cases you can connect to the Internet without making any changes to the default
32. a 2 Increase the separation between the equipment and receiver 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 4 Consult the dealer or an experienced radio TV technician for help This Class B digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme a la norme NMB 003 du Canada Disconnect the mains plug to shut off when find trouble or not in use The mains plug shall remain readily operable Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type Batteries Battery pack or battery installed shall not be exposed to excessive heat such as sunshine fire or the like LASER SAFETY This apparatus employs a laser Only a qualified service person should remove the cover or attempt to service this apparatus due to possible Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure Laser radiation when open Do not stare into beam _ Inside near the BD mechanism IMPORTANT COPYRIGHT INFORMATION Unauthorized copying broadcasting public performance and lending of discs are prohibited This item incorporates copy protection technology that is protected by U S patents and other intellectual property rights of Rovi Corporation Reverse engineering and disassembly
33. amera angles on the disc Press to rotate the JPEG files clockwise by 90 degrees 22 SUBTITLE button Press to display the subtitle menu 23 AUDIO button Press to display the audio menu 24 MODE button e During BD or DVD playback press to display the setting for the rapid playback and the picture adjustment During BD DVD and CD playback press to display the setting for the virtual surround e During BD playback press to turn the picture in picture feature on or off only applicable to BD video which supports the PIP function e During the JPEG playback press to display menus for changing the visual effect for switching the image or changing the size of the image In stop mode with audio CD or JPEG files inserted press to display menus for program and random playback In stop mode with BD inserted press to display a menu for setting the BD audio mode 25 CLEAR button Press to clear the information once entered or to cancel the programming for audio CD etc Installing the Batteries in the Remote Control Install AAA 1 5V battery x 2 matching the polarity indicated inside battery compartment of the remote control Note Incorrect use of batteries can result in hazards such as leakage and bursting Please observe the following Do not mix alkaline standard carbon zinc or rechargeable ni cad ni mh etc batteries Do not mix new and old batteries together Do not use dif
34. aved When IP address setting is set to Manual the setting of DNS setting will automatically be Manual and when IP address setting is set to Auto DHCP you can set either Auto DHCP or Manual for DNS setting Proxy Setting 1 Press OK repeatedly to select the desired setting For default settings select Do Not Use If you need to change the proxy setting as instructed by your Internet service provider to set the designated proxy address and port select Use If you select Use follow the following instructions to set the proxy address and proxy port 37 a Use A V to select Proxy Address then press OK Proxy address setting screen will appear Enter proxy address The keyboard screen will appear Others Proxy Address Caen e nh OK word word or words BLUE Switch between abc ABC YELLOW Set the entered number or word b After you enter proxy address correctly press YELLOW Confirmation message will appear Select Yes to complete the settings Others Proxy Address Is Setting OK XXXXX c Use A V to select Proxy Port then press OK Proxy port setting screen will appear Enter proxy port number with number buttons Others Proxy Address Please select the input Proxy Port then press OK d After you enter proxy port correctly press OK 2 Press RETURN to go back to
35. ayback are not available during program playback Press MODE to switch to the random playback mode The program will be cleared when the unit is turned into the standby mode the media mode is switched to the other mode the disc card is removed as for Disc mode just opening the disc tray will clear the program info Random Playback This function shuffles the playback order of tracks files 1 In stop mode press MODE twice O BO W 6 5 1 audio CD Track information JPEG File information 2 audioCD CD DA will be displayed JPEG Current Disc SD Memory Card or folder name will be displayed 3 Track File Track File list in the original list order will be displayed 4 Operation Press RED to go to the guide previous page in the track file list Press GREEN to go to the next page in the track file list 5 Total playback time of all tracks audio CD only 6 Playback status 2 Press gt play to start random playback To exit from the random playback mode Press MODE in stop mode Note During the random playback press E stop once to set the resume point and then press gt play to resume random playback from where M stop was pressed audio CD or from beginning of the file where M stop was pressed JPEG To repeat the current track file in the random selection press REPEAT repeatedly until Fa Track appear
36. creen of the network selection will appear e g Wired connection Others Connection Test Network Selection Wired then press OK Press OK again to display the confirmation screen of network settings Others Connection Test IP Address Subnet Mask Default Gateway Primary DNS Secondary DNS XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX then press OK 2 Press OK to go back to the previous screen or press SETUP to exit Note If the connection test passes you are ready to use BD Live VUDU or network update function using the Internet without making any additional settings 36 Ifthe connection test fails you may need to change the MAC address settings on your router You can check the MAC address of this unit on Custom screen Refer to Custom Wired on page 36 When connecting this unit directly to a modem for the first time or connecting it to a modem which was previously connected to any other network device e g a router PC etc you may have to power cycle the modem to reset the settings on the modem Connection Test is not available when Disable is selected in Network Connection Network Selection E Wired Select Wired if you made a wired connection and set the setting to Easy wired or Custom wired in accordance with your network environment lt Easy Wired gt Netwo
37. ctures as bright as you prefer You can select On or Off On Makes the dark parts brighter Off Shows the original picture as recorded m Noise reduction DVD video only Reduces the noise of the playback picture Off Shows the original picture as recorded 1 Executes 3D noise reduction which detects and deletes the noise by comparing each picture frames 2 Executes MPEG noise reduction which reduces the block noise and mosquito noise on the subtitle on movie 3 Executes both MPEG noise reduction and 3D noise reduction 3 Press RETURN to exit Note The setting will remain the same even if the unit is turned to the standby mode Black Level is not effective under the following conditions a the picture is output from HDMI OUT jack You cannot adjust the setting during rapid playback Virtual Surround You can enjoy stereophonic virtual space through your existing 2 channel stereo system 1 During playback press MODE 2 Use A V to select your desired setting Off No surround effect 1 Natural surround effect 2 Stronger surround effect 3 Press RETURN to exit Note Set the virtual surround setting to Off or lower the volume if the sound is distorted Virtual surround does not function during rapid playback e For the virtual surround audio signal will always be 2 channel LPCM 21 PIP BONUSVIE
38. d download one software per disc For more details on how to download the software please refer to the site 2 In Software Update menu use A V to select Disc Update then press OK 3 Use A V to select Yes then press OK 4 Disc tray will open automatically Insert the software update disc obtained at step 1 5 After completing loading disc confirmation message will appear Select Yes and press OK to start updating 6 After the disc update finishes this unit will restart and eject the disc The indicators show the progress status Success PLAY indicator lights up m sor D PLAY STANDBY ON L Error PLAY and STANDBY ON indicators flash 1 soe 2 m sor gt thay statbbav on If the indicator shows Error 1 Unplug the AC power cord for about 10 seconds re plug AC power cord and then turn the unit on 2 Confirm the current software version 3 If the software version is updated the software update has succeeded If not please try again Note Please do not unplug the AC power cord while updating the software All settings will remain the same even if you update the software version m Network Update You can update the software by con
39. desired option then press OK Setup Resets the setup menu to the default The setting for Parental Network Connection and Mode Select will not be reset Format SD Card Available only when an SD Memory Card is inserted Initializes the SD Memory Card After confirmation message appears use A V to select Yes then press OK Erase Saved BD ROM Data Player Clears the data saved for the BD ROM contents such as BD ROM game scores from this player Erase Saved BD ROM Data SD Card Available only when an SD Memory Card is inserted Clears the supplemental data for the BD ROM playback such as subtitle data from the SD Memory Card Network Settings Resets the network setting to the default Vudu Deactivate Deactivates the connection to VUDU Setup _ ___ _ Format SD Card Erase Saved BD ROM Data Player Erase Saved BD ROM Data SD Card P Network Settings Vudu Deactivate 4 Confirmation message will appear Use a v to select Yes then press OK Press OK again to complete the settings 5 Press SETUP to exit Note Do not remove the SD Memory Card while executing the Format SD Card or the Erase Saved BD ROM Data SD Card It damages the card 42 OTHERS Troubleshooting If the unit does not perform properly when operated as instructed in this manual check the unit consulting the following c
40. dly Dub video Title repeat The current title will be played back repeatedly Track repeat BD video DVD video i audio CD played back repeatedly repeat i JPEG file played back repeatedly All repeat All tracks or files in the media will be played back JPEG file repeatedly Note The repeat setting will be canceled when you stop playback The chapter title track or group repeat will be cleared when moving to another chapter title track file or folder Chapter and title repeat are not available with some scenes Program Playback You can play back the disc card in your desired order 1 In stop mode press MODE 2 Use A V to select a track folder file then press OK D BO 4 5 s Total 0 26 24 gl 8 e g audio CD 1 audio CD Track information JPEG File information 19 2 audioCD CD DA will be displayed JPEG Current Disc SD Memory Card or folder name will be displayed 3 Track Track Folder File list in the Folder File original order list 4 Programmed Track File list in the list programmed order 5 Cumulative playback time of all tracks in the programmed list audio CD only 6 Playback status 7 Current page Total page number 8 Operation Press RED to go to the guide previous page in the track file list Press GREEN to go to the next page in the track file list Press BLUE to go to the previous
41. e TV screen when the operation is prohibited by the disc or this unit During the playback of 2 layered disc pictures may stop for a moment This happens when the 1st layer switches to the 2nd layer This is not a malfunction The operation may vary when you play back BD videos or DVD videos with disc menu Refer to the manual accompanying the disc for details Set Still Mode setting to Field in Video menu if pictures in the pause mode are blurred Refer to Still Mode on page 27 Using the Title Disc Pop up Menu Many of BD video and DVD video discs contain title menu BD video DVD video disc menu DVD video or pop up menu BD video which guides you through the available functions in the disc The contents of the menus may differ depending on the discs Title menu BD video DVD video 1 Press TOP MENU 2 Use A W lt 4 gt to select an item then press OK 3 Press TOP MENU to exit Disc menu DVD video 1 Press POP MENU MENU 2 Use A V lt 4 gt to select an item then press OK 3 Press POP MENU MENU to exit Pop up menu BD video This is a special feature available for some BD videos When you press POP MENU MENU a menu pops out on the TV screen during playback 1 During the playback of BD video press POP MENU MENU 2 Use A W lt 4 gt to select an item then press OK 3 Press POP MENU MENU to exit Note Contents o
42. eck the settings in Audio menu Picture freezes momentarily Check the disc for fingerprints scratches and clean with a soft cloth during playback wiping from center to edge Clean the disc Disc cannot be played back Clean the disc Ensure the disc label is facing up Check if the disc is defective by trying another disc Cancel the ratings control or change the control level Insert a correct disc that can be played back on this unit read the card is not compatible when disc is removed The unit does not respond to Aim the remote control directly at infrared sensor window on the front the remote control panel Reduce the distance to infrared sensor window Replace the batteries in the remote control Re insert the batteries with their polarities signs as indicated Buttons do not work or the To completely reset the unit press and hold STANDBY ON on the unit stops responding front panel for 10 seconds to shut down the unit or unplug the AC cord from the AC outlet for 5 10 seconds The unit does not respond to Operations may not be permitted by the disc Refer to the instructions some operating commands of the disc during playback 43 Problem Solution The unit cannot read BD Condensation Let sit 1 or 2 hours DVD CD Check if the disc is compatible with this unit Refer to page 14 Wipe the dirt off the disc or replace the disc Angle does not switch
43. er the conditions listed below when the screen saver is activated when RETURN is pressed when the setup menu is called up Ifthe Media Select screen disappears before you make the selection refer to Selecting the Media Mode on page 16 Do not remove the SD Memory Card or turn the unit to the standby mode while the contents of the card are in playback It may result in malfunction or loss of the card s data Do not delete the folders or files in the SD Memory Card with your computer This unit may not read SD Memory Cards formatted ona computer Ifa folder or file name includes one of the following unrecognizable characters the folder or file name may not be displayed correctly Unrecognizable characters Foran SD Memory Card extension other than listed below cannot be recognized JPEG jpg 16 Selecting the Media Mode For the playback media to be read by this unit the correct media mode should be selected You can switch the media mode by following the steps below 1 In stop mode press SETUP 2 Use A V to select Z then press OK 3 Use A V to select Mode Select then press OK Quick doses gt HDMI Audio Out HDMI Multi Normal HDMI Video Resolution Auto Player Menu English Network Selection Wired 4 Use A V to select the desired media mode then press OK 5 Press SETUP to exit e Selected media mode is now activated
44. er 25 minutes of no action 1 7 lo SN 92 Wo 1 AC power cord Note 2 LAN terminal 3 HDMI OUT jack 4 AUDIO OUT jacks 5 DIGITAL OUT COAXIAL jack 6 Wireless LAN Internal 7 VIDEO OUT jack Do not touch the inner pins of the jacks on the rear panel Electrostatic discharge may cause permanent damage to the unit This unit does not have the RF modulator Do not try to rip the internal wireless LAN from the unit Remote Control OPEN CLOSE 1 7 13 pee MENU 3 7 0 O77 14 KEA L N 0K gt Ay 15 SETUP Jv RETURN O16 amp gt gt e 17 a 120 es C2 21 sa BC 22 CLEAR AUDIO 11 wo g 23 MODE L j 25 The unit can also be turned on by pressing these buttons 1 STANDBY ON button Press to turn on the unit or to turn the unit into the standby mode To completely turn off the unit you must unplug the AC power cord 2 RED GREEN BLUE YELLOW button Press to select items on some BD menus e When file list thumbnail list is shown press to switch between pages 3 TOP MENU button Press to display the top menu During VUDU feature screen is displayed except during playback press to exit 4 al Y 4 P buttons Press to select items or settings 5 SETUP button Press to display or to exit the setup menu 6 lt lt reverse but
45. f menus and corresponding menu operations may vary among discs Refer to the manual accompanying the disc for details Playing Back Audio CD JPEG Files Before you begin make sure the correct media mode is selected Refer to Selecting the Media Mode on page 16 1 Insert an audio CD or a disc card with JPEG files 2 Use A V to select a desired track folder or file then press OK Use lt gt to go back and forward between the hierarchies only for JPEG files If you press OK on the desired file playback will start R Folder 1 Folder 3 JPEG A JPEGB a JPEG C JPEG_D 1 audioCD Track information JPEG File information 2 audioCD CD DA will be displayed JPEG Current Disc or folder name will be displayed 3 audioCD List of the track number and time JPEG List of the file folder names in the current folder disc 4 Operation Press RED to go to the previous guide page Press GREEN to go to the next page 6 Current page Total page number 7 Playback status Icons audio CD tracks zee 17 3 Press M stop to stop playback It is recommended that files to be played back in this unit are recorded under the following specifications lt JPEG gt Upper limit 2 560 x 1 900 dots sub sampling is 4 4 4 5 120 x 3 840 dots sub sampling is up to 4 2 2 Lower limit 32 x 32 dots e File size of image maximum 12 MB Note
46. ferent kinds of batteries together Although they may look similar different batteries may have different voltages Make sure that the and ends of each battery match the indications in the battery compartment Remove batteries from battery compartment that are not going to be used for a month or more e When disposing of used batteries please comply with governmental regulations or environmental public rules that apply in your country or area e Do not recharge short circuit heat burn or disassemble batteries Opening Screen In stop mode opening screen is displayed VUDU To access the VUDU App Home screen CONNECTIONS Connection to the TV HDMI Video Audio Connection Supports up to 1080i 1080p 1080p24 resolution Your TV X KO HDMI IN fi on gt s HDMI cable not supplied HDMIOUT No analog audio connection required Use an HDMI cable with the HDMI logo a certified HDMI cable for this connection High Speed HDMI cable also known as HDMI category 2 cable is recommended for optimal compatibility Picture is not displayed on the TV screen The indicators blink under the following conditions When the connected device does not support HDCP When the connected device is recognized as an HDCP incompatible by HDMI SRM When the connected device supports HDCP but cannot be recognized as an HDCP compatible for some reaso
47. ften in different audio languages or audio formats you can switch them during playback OD 1 During playback press AUDIO 2 Use A V to select Primary or Secondary audio to set then press OK mE Primar Secondary 2 ENG Primary Dolby D Multi ch B Sets the audio for the primary video Sets the audio for the secondary video 3 Use A V to select your desired audio stream channel e For Secondary use lt gt to switch between current audio setting and Off 4 Press AUDIO to exit CRA OK 1 During playback press AUDIO 2 Use A V to select your desired audio stream channel Secondary 3 2 1ch 48k 13 _ EE For audio CD you can select following options Stereo Both right and left channels are active stereo L ch Only left channel is active R ch Only right channel is active 3 Press AUDIO to exit 24 Note The secondary audio will not be output when the secondary video is not displayed or when BD Audio Mode is set to HD Audio Output For some BDs secondary audio will be output even when secondary video is off The sound mode cannot be changed during playback of discs not recorded in multiple audio Some discs allow changing the audio language setting on the disc menu Operation varies depending on the discs Refer to the manual accompanying the disc AUDIO may not work on
48. hecklist Solution Check if the AC cord is properly connected Unplug the AC cord once and wait for 5 10 seconds and then plug it in again No sound or picture Check if the connected TV is turned on Check if the connections are made securely and correctly Check whether the connected TV or other device supports HDCP This unit will not output a video signal unless the other device supports HDCP Check whether the output format of this unit HDMI FORMAT matches the supported input format of other connected device No audio video signal on the If the unit is connected to the unauthorized display device with an display device via HDMI cable HDMI cable the audio video signal may not be output Perform an HDMI cable hotplug wherein you disconnect the HDMI cable from the TV and this unit and then reconnect it to both the devices while they are powered on Ensure that your HDMI cable is certified Distorted picture Sometimes a small amount of picture distortion may appear This is not a malfunction Connect this unit directly to the TV If the audio video cables are connected to a VCR pictures may be distorted due to the copy right protection system Completely distorted picture Make sure the disc is compatible with this unit or black white picture with BD DVD No sound or distorted sound Adjust the volume Check if speakers are connected correctly Check the HDMI connections Ch
49. hey are not available under the conditions at the time 2 Quick Z Quick menu contains setting items extracted from 4 Custom menu which may be used frequently 1 In stop mode press SETUP 2 Use A V to select 4 then press OK 3 Use A V to select your desired setting items HDMI Audio Out HDMI Multi Normal HDMI Video Resolution Auto Player Menu English Network Selection Wired 4 Follow the procedure below depending on the setting items A If does not appear on the right side of the setting items when you select the items Press OK repeatedly to change options B If appears on the right side of the setting items when you select the items 1 Press OK 2 Use A V to select options then press OK Use lt 4 or RETURN to go back to the previous screen 5 Press SETUP to exit iA Custom HA Custom menu contains all the setting items 1 In stop mode press SETUP 2 Use A V to select 74 then press OK 3 Use A V to select your desired setting category then press OK a Language Video Audio Parental eg Others For Parental menu follow the procedure on page 32 4 Use A V to select your desired setting items 5 Follow the procedure below depending on the setting items A If gt does not appear on the right side of the setting items when you select the items Press OK repeatedly to change options B If appears o
50. ill start e Press CLEAR to erase an incorrect input Note During program and random playback search functions are not available except the search using K4 lt gt P I skip e Time search is available only in the same track file or title For BD chapter and time search are available only during playback Using the Number buttons Direct Search E Title search In stop mode enter the title number you want to search using the Number buttons Playback of the title will start in a few seconds m Chapter search During playback of a title enter the chapter number you want to search using the Number buttons Playback of the chapter will start in a few seconds E Track file search Enter the track file number you want to search using the Number buttons Playback of the track file will start in a few seconds Note As for the BD video how it performs will be strongly determined by the disc and may not perform as described here Switching Subtitles Some video materials may have subtitles in 1 or more languages For commercially available discs the supported languages can be found on the disc case Follow the steps below to switch the subtitle languages during playback 5 1 During playback press SUBTITLE 2 Use A V to select Primary Subtitle Secondary Subtitle or Subtitle Style then press OK 2 ENG m Secondary Subtitle 2 ENG ni Subtitle Style 2 25
51. ing equipment modem etc PS Internet y a Hub or wireless broadband router LAN cable not supplied Note e After you made the wireless connection set up necessary network settings For network setting of wireless connection refer to Wireless on page 38 e Fora wireless router use a router which supports IEEE 802 11 b g n n is recommended for stable operation of the wireless network Set the wireless router to Infrastructure mode This unit does not support Ad hoc mode e Other radio devices or obstacles may cause interference to the wireless network connection Finding the Video Channel on Your TV After you have completed all the connections you must find the correct video channel external input channel on your TV 1 After you have made all the necessary connections press STANDBY ON to turn on the unit 2 Turn on your TV 3 Press the button on the TV s remote control that accesses the external input channel It may be labeled SOURCE AV or SELECT refer to your TV s user manual Note e If the TV is connected by an HDMI cable it may take a while for the opening picture to come up 13 PLAYBACK Portions of this product are protected under a x x a e ei copyright law and are provided under license by ARIS SOLANA 4C Information on Playback Please keep the SD Memory Cards i
52. is warranty only covers failures due to defects in material or workmanship which occur during normal use It does not cover damage which occurs in shipment or failures which are caused by repairs alterations or products not supplied by FUNAI CORP or damage which results from accident misuse abuse mishandling misapplication alteration faulty installation improper maintenance commercial use such as hotel rental or office use of this product or damage which results from fire flood lightning or other acts of God THIS WARRANTY DOES NOT COVER PACKING MATERIALS ANY ACCESSORIES EXCEPT REMOTE CONTROL ANY COSMETIC PARTS COMPLETE ASSEMBLY PARTS DEMO OR FLOOR MODELS FUNAI CORP AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED IN TO AN AUTHORIZED SERVICE CENTER THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT IF NO PROOF OF PURCHASE
53. l change 2 Press gt play to return to normal playback Note For BD and DVD speed changes in 5 different levels For audio CD speed changes in 3 different levels For audio CD fast forward fast reverse search between different tracks are not available during program and random playback Slow Forward Playback 1 During playback press II pause then press gt gt forward Every time you press gt gt forward playback speed will change 2 Press gt play to return to normal playback Note For BD and DVD speed changes in 3 different levels Only slow forward is available Set Still Mode setting to Field in Video menu if pictures in the slow forward playback mode are blurred Refer to Still Mode on page 27 Step by Step Playback 1 In pause mode press II pause repeatedly Every time you press II pause playback will advance one step at a time 2 Press gt play to return to normal playback Note e Only step by step forward is available Set Still Mode setting to Field in Video menu if pictures in step by step playback mode are blurred Refer to Still Mode on page 27 Repeat Playback Available repeat functions vary depending the discs 1 During playback press REPEAT repeatedly to select the desired repeat mode Repeat mode Available media caren ch The current chapter will be ne played back repeate
54. ll Rights Reserved Java and all Java based trademarks and logos are trademarks or registered trademarks of Oracle and or its affiliates BONUS WEW BONUSVIEW is trademark of Blu ray Disc Association BD Live and BD Live logo are trademarks of Blu ray Disc Association A BDI IVE VUDU is a trademark of VUDU Inc Blu ray Disc and 2 are trademarks Blu ray Disc pra 4 is a trademark of DVD Format Logo Licensing Corporation Kodak Picture CD COMPATIBLE Kodak and KODAK Picture CD Compatible are trademarks of Kodak used under license Wireless CCCCLAN Front Panel The unit can also be turned on by pressing these buttons 1 Disc tray 2 4 OPEN CLOSE button 3 Infrared sensor window 4 E STOP button 5 PLAY button 6 PLAY indicator This indicator lights up in green when discs or SD cards play back 7 STANDBY ON indicator This indicator lights up in red when the power is in the standby mode Rear Panel 8 STANDBY ON button e Press to turn on the unit or to turn the unit into the standby mode To completely turn off the unit you must unplug the AC power cord e Press and hold for 10 seconds to shut down the unit 9 SD card slot Note e This unit will be turned into the standby mode automatically aft
55. m on page 27 2 Quick menu consists of the setting menus frequently used and they are accompanied with 2 Setting items Descriptions Sets the picture size according to aspect ratio of the connected TV HDMI Video Resolution Sets the HDMI video L resolution HDMI Deep Color Sets whether to output the picture from HDMI OUT jack with Deep Color or not Sets the optimum progressive mode for the image material output from HDMI OUT jack Still Mode 1 Adjusts picture resolution and quality in still mode 27 Progressive Mode 1 An individual picture on the TV screen is called Frame which consists of two separate images i gt Audio called Field Some pictures may be blurred at the auto setting in Still Mode setting due to their data characteristics Note for HDMI Video Resolution Even if you set HDMI Video Resolution setting to Auto when this unit is connected to a DVI compatible display devices with an HDMI DVI cable 480p signal will be output Video and audio signals may be distorted temporarily when switching to from the HDMI output mode You cannot change the video resolution during playback of Blu ray Discs To change the resolution stop playback In order to get natural and high quality film reproduction of 24 frame film material use an HDMI cable High Speed HDMI cable is recommended and select Auto if the connected TV is compatible with
56. n lt Title Chapter information for BD gt o 2 d W B ia oon lt Chapter information for DVD gt 2 6 me 2 5 oo S u 1 Current title number 2 Current chapter number Total number of chapters 3 Current repeat setting Only when repeat setting is active C Chapter repeat T Title repeat 4 Indicates that the multi camera angle images are available on the scene 5 Current playback status 6 Elapsed time or remaining time of the current chapter E Title information 0 B En 2 5 Ce amp gt 1 Current title number Total number of titles 2 Elapsed time or remaining time of the current title E Track File information T 2 3 4 E 1 io soles 1 Current track file number Total number of track file 2 Elapsed time or remaining time of the current track except for JPEG files 3 Indication of SD Memory Card playback 4 Current repeat setting Only when repeat setting is active T Track repeat G Group repeat A All repeat E Disc information E 2 Cu 0 00 51 1 Current track number Total number of tracks 2 Elapsed time or remaining time of the current disc E File name information W 1 Media icon and file name ES JPEG file m Decoding format information W 1 Decoding format How to Insert a Disc 1 Press OPEN CLOSE 4 to open the disc tray 2 Place the disc on the disc tray with
57. n The indicators blink as follows for 30 seconds Standard Video Standard Audio Connection Supports only 480i resolution Audio cable supplied Connect this unit directly to the TV If the audio video cables are connected to a VCR pictures may be distorted due to the copy right protection system 10 Connection to an Audio System When you change the connections all devices should be turned off e Refer to the manual accompanying external devices for more information 2 Channel Analog Audio Connection Digital Audio Connection stereo system AV receiver amplifier Digital audio coaxial input jack Digital audio cable not supplied Audio cable supplied COAXIAL AUDIO OUT DIGITAL OUT COAXIAL To set up Digital Out refer to page 29 HDMI Audio Connection AV receiver amplifier with an HDMI input jack HDMI IN HDMI cable oo m2 00 D HDMIOUT To set up HDMI Audio Out refer to page 28 11 Connection to the Network By connecting this unit to the Internet you can access VUDU services and applications BD Live features on a Blu ray Disc and perform network update For more information about software update refer to Network Update on page 41 For more information about BD Live refer to Enjoying BD Live Discs with Internet on page 22 For more information about VUDU refer to VUDU Operations on page 25
58. n the right side of the setting items when you select the items 1 Press OK 2 Use A V to select options then press OK Use 4 or RETURN to go back to the previous screen 6 Press SETUP to exit Language B 2 gt Language Subtitle Off Disc Menu English Player Menu English To select the setting items and options refer to WA Custom on page 27 P Quick menu consists of the setting menus frequently used and they are accompanied with 2 Setting items Descriptions Sets the language for audio Subtitle Sets the language for subtitle Disc Menu Sets the language for disc menu or pop up menu Player Menu 2 1 Sets the language for on screen display 1 Auto for Player Menu activates the Get amp Set Menu Language function Refer to page 35 Auto is available only when fun Link HDMI CEC is set to On inside the parentheses next to Auto will be the language which is currently selected by your TV For Audio Subtitle and Disc Menu if you select Other enter the 4 digit number code for the desired language Refer to Language Code List on page 45 Only the languages supported by the disc can be selected Video Video Nas bp is Wide HDMI Video Resolution Auto HDMI Deep Color Auto Progressive Mode Auto Still Mode Auto To select the setting items and options refer to WA Custo
59. n their cases Before you start playing back a disc read the when you are not using them following information Do not try to open or modify the card Playable Discs and Files Do not touch the terminal surface with your fingers or any metals Playable discs Do not attach additional labels or stickers to Blu ray Disc cards BD video single dual layer Do not remove the label of the SD Memory BD RE ver 2 1 single dual layer Cards Recorded in BDMV format BD R ver 1 1 1 2 1 3 single dual layer Recorded i in BDMV format e This unit recognizes up to 8 characters of file name in the SD Memory Card Characters after 8th will not be displayed Unplayable Discs and Files CD ROM CD compa tdisc int ractive e ti 2210063 Ti OS RAI AE neces HD DVD SVCD Unfinalized disc DVD RW R BD RE ver 1 0 CD RW R BD RE ver 2 1 Recorded in BDAV format SD Memory Card BD R ver 1 1 1 2 1 3 Recorded in BDAV including SDHC format ee BD DVD CD SD Memory Card contains MP3 z WMA and DivX files Readable cards res files BD DVD hybrid disc played back as a BD video ata only SD Memory Card 8 MB 2 GB JPEG picture DVD RW R recorded in non compatible SDHC Memory Card in picture recording format 4 GB 8 GB ee h Super Audio CD Only the sound on the CD miniSD Card 8 MB 2 GB ok co OM layer can be heard The sound on the high microSD Card 8 MB 2 GB 2 Pr
60. necting the unit to the Internet 1 In Software Update menu use A V to select Network Update then press OK 2 Use A V to select Yes then press OK e This unit will then start checking for the latest software version 3 Confirmation message will appear Use lt gt to select Yes then press OK e The unit will start downloading the latest software version 4 When the download completes confirmation message will appear Press OK e The unit will start updating the software version It may take a while to complete the updating 5 After updating finishes this unit will restart and open the disc tray automatically Note In order to update the software via the Internet you must connect the unit to the Internet and set up necessary settings For network connection refer to Connection to the Network on page 12 For network setup refer to Network Connection on page 36 Please do not unplug the AC power cord or LAN cable while executing the Network Update All settings will remain the same even if you update the software version The disc tray will open automatically after updating finishes This is not a malfunction 41 Initialize Menus to reset player settings format SD card clear erased BD ROM data or network settings and deactivate VUDU 1 In stop mode press SETUP 2 Use A V to select then press OK 3 Use A V to select a
61. ng to On or Off automatically when the discs recorded in Dolby TrueHD format are in playback 1 Under following circumstances HDMI Multi Normal and HDMI Multi LPCM are not available HDMI cable is not connected to HDMI OUT jack Connected TV is off Connected TV is not compatible with audio output HDMI Audio Out Setting When using HDMI connections make HDMI Audio Out setting in Audio menu according to the specifications of the device to be connected Refer to page 28 Normally set it to HDMI Multi Normal so that the unit automatically picks and outputs the best audio format suited to your connected device Device to be connected HDMI Audio Out Output HDMI audio signal setting Device compatible with Dolby HDMI Multi Normal Dolby Digital Dolby Digital Plus Dolby Digital Dolby Digital Plus Dolby TrueHD DTS or DTS HD bitstream are TrueHD DTS or DTS HD decoding output from HDMI OUT jack Make the speaker settings on the connected AV amplifier etc Device compatible with 3 or more HDMI Multi LPCM Multi channel audio signals are output channels of audio inputs not from HDMI OUT jack Make the speaker Dolby Digital Dolby Digital Plus settings with the speaker setting Dolby TrueHD DTS or DTS HD items appear after you select HDMI compatible Multi LPCM HDMI connection to a TV and Audio Mute HDMI audio will be mute and Dolby digital audio connection c
62. ning Dew condensation may form inside the unit in the following conditions If so do not use this unit at least for a few hours until its inside gets dry The unit is moved from a cold place to a warm place Under conditions of high humidity After heating a cold room Note about Recycling e This unit s packaging materials are recyclable and can be reused Please dispose of any materials in accordance with your local recycling regulations e Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes Notice for Progressive Scan Output Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture In case of picture problems with 480 progressive scan output it is recommended that the user switch the connection to the standard definition output If there are questions regarding your TV set compatibility with this 480p BD DVD player please contact our customer service center ENERGY STAR is a joint program of the U S Environmental Protection Agency and the U S Department of meem Energy helping us all save money and protect the environment through energy efficient products and practices Supplied Accessories Remote Control NB904UD NB954UD Batteries AAA 1 5V x 2 Audio video cables e Quick Start Guide
63. nnection to the TV Connection to an Audio System 2 Channel Analog Audio Connection Digital Audio Connection HDMI Audio Connection Connection to the Network Wired Connection Wireless Connection Finding the Video Channel on Your TV PLAYBACK Information on Playback Playable Discs and Files Unplayable Discs and Files Region Codes On Screen Display How to Insert a Disc Reading the SD Memory Card Selecting the Media Mode s Playing Back BD DVD 16 Using the Title Disc Pop up Menu Playing Back Audio CD JPEG Files KODAK Picture CD Fast Forward Fast Reverse Slow Forward Playback Step by Step Playback Repeat Playback Program Playback Random Playback Rapid Playback Adjusting the Picture Virtual Surround PIP BONUSVIEW Setting Camera Angle Enjoying BD Live Discs with Internet SOA CH sssssssssnasssassosesnssssssssesectssnssoosssessesnssasosssoscotns Using the Number buttons Direct Search Switching Subtitles Switching Audio Soundtrack Setting the BD Audio Mode NNOE NN NETWORK OPERATIONS VUDU Operations Before Activating VUDU Activating VUDU usses Guide to VUDU Menu Screen Renting or Purchasing VUDU Movies TV EDISOOGS Sa anaana raa esvertteescasstegteet 26 Watching Rented or Purchased VUDU Movies TV EP
64. oaxial Digital DTS bitstream or LPCM will be to an AV amplifier output from DIGITAL OUT jack depending on Digital Out setting Note e The audio signals from HDMI OUT jack including the sampling frequency the number of channels and bit length maybe limited by the device that is connected Among the devices that support HDMI some do not support audio output e g projectors In connections with device such as this unit audio signals are not output from HDMI OUT jack e Video and audio signals may be distorted temporarily when switching to from the HDMI output mode Digital Out Setting When Audio Mute is selected in HDMI Audio Out setting HDMI audio signal will be mute and the audio signals output from DIGITAL OUT jack changes depending on Digital Out setting Quick gt HDMI Audio Out gt Audio Mute gt Digital Out Bitstream When Slavin back discs recorded in Dolby Digital Dolby Digital F Plus Dolby TrueHD DTS or DTS HD Ib ital or DTS LPCM LPCM signal will be output from DIGITAL OUT jack e This setting is not effective when the HDMI audio signal is output Note In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal set HDMI Audio Out setting to HDMI Multi LPCM 29 Speaker Setting Available when you have HDMI cable connected to HDMI OUT jack This unit allows you to enjoy multi channel surround sound such as
65. ofile 2 0 density Super Audio CD layer cannot be heard Profile 1 1 e Playability of dual discs are not guaranteed Note for SD Memory Cards e This unit supports SD Memory Card with FAT12 FAT16 file system and SDHC Memory Card with FAT32 file system e This unit does not support NTFS file system e This unit may not read SD Memory Cards formatted on a computer If that is the case please reformat the SD Memory Cards in this unit and try again e This unit does not support miniSDHC and microSDHC Memory Card e For miniSD Card and microSD Card an adapter is necessary 14 Region Codes This unit has been designed to play back BD video with region A and DVD video with region 1 or ALL You cannot play back BD video or DVD video that are labeled for other regions Look for the symbols on your BD video or DVD video If these region symbols do not appear on your BD video or DVD video you cannot play back the disc in this unit The letter or number inside the globe refers to region of the world A BD video or DVD video labeled for a specific region can only be played back in the unit with the same region code On Screen Display You can check information about the current disc by pressing DISPLAY To call the on screen display menu press DISPLAY during playback Every time you press DISPLAY the information changes Depending on the media available information varies m Chapter informatio
66. otal page number 3 Operation guide Press BLUE to go to the previous page Press YELLOW to go to the next page 4 Playback status 2 Use A W lt 4 gt to select a desired file to be played back then press gt play or OK An image will be played back from the selected file and go to the next one in turn 3 Press M stop to stop playback To return to the first item Press TOP MENU To return to the file played last Press POP MENU MENU Tips for JPEG KODAK Picture CD Playback The selected file will be played back and go to the next file in the current hierarchy in turn every 10 seconds e Every press on ANGLE will turn the image clockwise by 90 degrees when an image is displayed To change the visual effect for switching the playback image press MODE once then use lt a gt or OK to switch between Cut In Out and Fade In Out During JPEG KODAK Picture CD playback press MODE twice to change the size of the playback image then use lt 4 or OK to switch between Normal 100 and Small 95 The size change may have no effect on some files e g files with a small picture size Fast Forward Fast Reverse 1 During playback press gt gt forward repeatedly for fast forward During playback press lt lt reverse repeatedly for fast reverse Every time you press gt gt forward or lt lt reverse the playback speed wil
67. page in the programmed list Press YELLOW to go to the next page in the programmed list For JPEG files use A V to select a folder then press OK first and then use A V to select a file then press OK Press CLEAR to erase the last file of the program Use A V to select All Clear at the bottom of the list to erase all the tracks files in the program The programmed tracks files is displayed in the right hand screen Use lt 4 to go back forward between the hierarchy of folders 3 Press gt play to start program playback The program playback will start To exit from the program playback mode Press RETURN in stop mode Note During program playback press M stop once to set the resume point and then press gt play to resume program playback from where M stop was pressed audio CD or from beginning of the file where I stop was pressed JPEG During program playback press M stop twice to display the program screen To go back to the normal program playback press RETURN to exit from the program screen then press gt play Up to 99 tracks files can be entered To repeat the current track file in the program press REPEAT repeatedly until K Track appears during playback To repeat the entire program press REPEAT repeatedly until All appears during playback 20 Playback from a desired track file and random pl
68. parameter for optimizing This measure system will be used the timing at which the sound for Delay Time setting outputs from the speakers Press OK to switch the settings according to the distance from Select the distance from the the listening position listening position to the speaker to urround get the ideal delay time urround Back Default Select Default then press OK to reset Delay Time setting to the default e For Speaker Size setting the settings of each speaker size may be adjusted automatically corresponding to each setting e g If Front is set to Small you cannot set Center Surround and Surround Back to Large For Delay Time the difference between the value of the Front Surround and Surround Back setting cannot exceed 15 ft 4 5m and the difference between the value of the Front and Center setting cannot exceed 5 ft 1 5m For Delay Time the value of the Center Surround and Surround Back setting cannot exceed the value of the Front setting For Delay Time the setting of Center Surround and Surround Back will be changed automatically to the setting value of the Front e g If the Front is set to 60ft 18m the setting of Center Surround and Surround Back will be changed to 60ft 18m as well 31 Parental Ratings control allows you
69. product Company is not responsible for customer service related to the content and services Any question or request for service relating to the content or services should be made directly to the respective content and service providers THIRD PARTY CONTENT AND SERVICES MADE AVAILABLE THROUGH THIS PRODUCT ARE PROVIDED AS IS COMPANY DOES NOT WARRANT CONTENT OR SERVICES SO PROVIDED FOR ANY PURPOSE WHATSOEVER COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ACCURACY VALIDITY TIMELINESS LEGALITY SUITABILITY OR QUALITY OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS PRODUCT IN NO EVENT SHALL COMPANY BE LIABLE FOR ANY DAMAGES WHETHER ARISING IN CONTRACT OR TORT INCLUDING WITHOUT LIMITATION ANY DIRECT INDIRECT INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES LOST PROFITS ATTORNEY FEES EXPENSES OR ANY OTHER DAMAGES ARISING OUT OF OR IN CONNECTION WITH ANY CONTENT OR ANY INFORMATION CONTAINED THEREIN OR SERVICE PROVIDED TO THE USER OR ANY THIRD PARTY EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES All content and services accessible through this product belong to third parties and are protected by copyright patent trademark and or other intellectual property rights Such content and services are provided solely for the User s personal noncommercial use User may not use any content or services in a manner that ha
70. protect switch on the SD card is not enabled Cannot play back BD video Insert an SD card 1GB or more which is formatted on this unit BD ROM Profile 2 0 Some discs with BD Live function require memory when playing back the content Do not remove the card during playback Make sure the write protect switch on the SD card is not enabled The picture quality of Check the speed of your Internet connection You need speeds of at streaming movie VUDU is least 8 Mbps to this player for high quality uninterrupted playback poor Streaming movie VUDU Contact your Internet service provider to troubleshoot your Internet often stops or starts buffering connection for speed and line quality Consistent line quality and during playback speed are very important for Internet video playback Cannot use VUDU feature Check if the network connection is properly made Cannot rent or buy movies You need to activate the VUDU account Refer to page 25 TV episodes on VUDU Log into your account at http my vudu com and check your payment information Note Some functions are not available in specific modes but this is not a malfunction Read the description in this manual for details on correct operations Some functions are prohibited on some discs 44 Language Code List Language Abkhazian Afar Afrikaans Albanian Amharic Arabic Code 4748 4747 4752 6563 4759 4764 Language Code Language Code Language
71. quality options differ depending on the content Watching Rented or Purchased VUDU Movies TV Episodes 1 Follow steps 1 to 2 in Renting or Purchasing VUDU Movies TV Episodes on page 26 2 Use lt gt to select My Vudu then press OK 3 Use lt gt to select My Rentals My Movies or My TV Shows then press OK 4 Use A V to select a desired movie TV episode then press OK 5 Select Watch to start watching the movie TV episode e During playback use following buttons to control the playback 26 Action Pause the playback Button H pause M stop Stop the playback lt lt reverse Fast reverse or forward wa the playback gt play Resume the playback Display the info banner which shows the playback information TOP MENU Go back to opening screen Note Available buttons and actions may subject to change without notice Using Internet Applications In addition to VUDU movies you can use various kinds of Internet applications 1 In App Home screen use A W lt 4 gt to select a desired application and press OK 2 Follow the instructions on screen of the selected application Note e Available applications may change without notice FUNCTION SETUP In the setup menu you can change the setting for audio video language etc You cannot change the setting during playback Setting items displayed in gray indicates t
72. require memory when playing back the content If you cannot play back a disc with BD Live function insert an SD card 1GB or more which is formatted on this unit Note for AACS Online The player or disc IDs may be sent to the content provider when playing back a disc with BD Live function If you save your viewing history on the server by using these IDs you will be introduced to other similar movies You can save game score histories Search m Using gt gt skip 1 During playback press gt P skip to move to the next track title chapter file Press it repeatedly to skip to subsequent tracks Press I4 skip once to go back to the beginning of the current track Press it repeatedly to go to the previous tracks e For JPEG files press 4 skip to go back to the previous file Note e For BD and DVD if title contains no chapters lt gt P 1 skip changes the title e For JPEG files lt 4 is also available m Using SEARCH By using SEARCH you can select the following search modes Search mode PATT Chapter Title search PVEVE ed CEUC IE BD video DVD video audio CD JPEG file Track search BD video DVD video Time search audio CD 1 During playback press SEARCH repeatedly until your desired search mode appears 2 Enter the desired chapter title track file number or time to search for using the Number buttons e Chapter title track or time search w
73. rk settings are set to the following settings initially In most cases you can connect to the Internet without making any changes to the default settings IP Address Setting Auto DHCP DNS Setting Auto DHCP Proxy Setting Do Not Use Connection Speed Auto BD Live Setting Allow If you want to set the network settings back to the default settings as above except BD Live Setting follow the procedure below 1 In Network Connection menu use A V to select Network Selection then press OK 2 Use A V to select Wired then press OK 3 Use A V to select Easy then press OK The unit will start the connection test automatically and the test result will appear right after the test finishes 4 Press OK to activate the network settings and set the network connection automatically Press SETUP to exit Note The setting of BD Live Setting will not be set back to the default even if you follow the procedure lt Custom Wired gt In following cases select Custom wired to set each setting as necessary When connection test failed with the setting of Easy wired When instructed by your Internet service provider to make specific settings in accordance with your network environment To set the network setting to Custom wired follow the following procedure 1 Follow steps 1 to 2 in Easy Wired on page 36 2 Use A V to select
74. s during playback To repeat the entire random selection press REPEAT repeatedly until All appears during playback Playback from a desired track file is not available during random playback In stop mode press RETURN to switch to the program playback mode Rapid Playback This function plays back approximately at 1 3 times the normal playback while keeping the sound output This function is available only on discs recorded in the Dolby Digital format 1 During playback press MODE repeatedly until the Rapid playback setting appears Of 2 Press OK or lt 4 to switch 1 3x or Off Off Plays back in normal speed DD Plays back approximately at 1 3 times of normal playback 3 Press gt play to return to normal playback Note Picture adjustment and audio language setting cannot be changed during this function Virtual surround does not work during this function e This function may not work at some points on a disc e During this function 2ch LPCM will be output from HDMI OUT jack and DIGITAL OUT jack Adjusting the Picture You can adjust the picture quality 1 During playback press MODE repeatedly until appears 2 Use A V to select your desired item then use lt gt to adjust the setting Black Level On Noise Reduction Off e g DVD video Black level You can adjust the black level setting to make the black parts of the pi
75. s not been authorized by the content owner or service provider Without limiting the foregoing unless expressly authorized by the applicable content owner or service provider you may not modify copy republish upload post transmit translate sell create derivative works exploit or distribute in any manner or medium any content or services made available through this product 46 MEMO 47 MAGNAVOX LIMITED WARRANTY FUNAI CORP will repair this product free of charge in the USA in the event of defect in materials or workmanship as follows DURATION PARTS FUNAI CORP will provide parts to replace defective parts without charge for one 1 year from the date of original retail purchase Certain parts are excluded from this warranty LABOR FUNAI CORP will provide the labor without charge for a period of ninety 90 days from the date of original retail purchase LIMITS AND EXCLUSIONS THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY This warranty shall not be extended to any other person or transferee This warranty is void and of no effect if any serial numbers on the product are altered replaced defaced missing or if service was attempted by an unauthorized service center This limited warranty does not apply to any product not purchased and used in the United States Th
76. some discs with multiple audio streams or channels e g DVDs that allow changing audio setting on the disc menu If you select a language that has a 3 letter language code the code will be displayed every time you change the audio language setting If you select any other languages will be displayed instead Refer to page 45 Audio Language selection cannot be made during rapid playback Refer to page 21 If 4 digit language code appears in the audio menu refer to page 45 e Ifthe disc has no audio language Not Available will be displayed on the TV screen For DTS CD 5 1 music disc selecting audio streams or channels is not available Setting the BD Audio Mode There are 2 options for the BD Audio Mode setting either by setting the output to the secondary and interactive audio accompanied by the primary audio or by setting only the primary audio Depending on the setting of the mode Dolby Digital Dolby Digital Plus Dolby TrueHD DTS or DTS HD output changes between multi LPCM and Bitstream 1 In stop mode with BD inserted press MODE 2 Use A V to select your desired setting Mix Audio Output If it is available BD video s secondary and interactive audio will be output with the primary audio e The secondary audio is the audio for the secondary video Director s comment etc and the interactive audio is the audio for the interactive application Button click so
77. than gt play works only with discs inserted Standby When you press and hold STANDBY ON for 2 seconds it turns off the power of the TV first and then turns off the power of this unit also When the connected fun Link HDMI CEC compatible display device is turned off this unit may also turn off together System Information Get amp Set Menu Language The unit recognizes the OSD language set for the TV and automatically sets the same language as the player menu language OSD menu language for this unit This feature is available only when Auto XXXX is selected in Player Menu in the setup menu Refer to Player Menu on page 27 35 Network Connection SETUP gt ffA gt Others gt Network Connection Set up network connection settings in order to use BD Live VUDU or network update function Connection Test After you enable a network connection or change the network settings always perform the connection test to check if the connection is correctly made 1 In Network Connection menu use A V to select Connection Test then press OK Connection test will start automatically and the test result will appear right after the connection test finishes e Testing The test is in progress e Pass Connection test is successfully completed Fail Connection test failed Check the connection settings If the connection test passes press OK Confirmation s
78. the previous screen or press SETUP to exit Note The range of input numbers for the port number is between 0 and 65535 If you enter a number larger than 65535 it will be regarded as 65535 38 A y 4 lt Move the highlight the Number buttons For proxy port certain ports might be closed blocked or unusable depending on your network environment Connection Speed You can set connection speed as your preference The default setting is Auto 1 Press OK to show the options for Connection Speed 2 Use A V to select the desired setting then press OK Auto Set the appropriate connection speed automatically in accordance with your network environment 10BASE Half Set the connection speed to 10BASE Half 10BASE Full Set the connection speed to 10BASE Full 100BASE Half Set the connection speed to 100BASE Half 100BASE Full Set the connection speed to 100BASE Full 3 Press RETURN to go back to the previous screen or press SETUP to exit Note Choose a connection speed in accordance with your network environment The network connection may be disabled depending on the device when the settings are changed BD Live Setting You can limit Internet access for BD Live discs The default setting is Allow 1 Press OK to show the options for BD Live Setting 2 Use A V to select the desired setting then press OK
79. tically Others Find wireless network Apt AP2 ill AP3 1l AP4 ill AP5 a 1l AP6_Test 1l lf the unit finds the authentication setting of the selected wireless network skip to step 7 If the unit fails to find the authentication setting automatically proceed to step 6 to select it manually 6 Use A V to select the authentication setting of the selected wireless network then press OK Others Find wireless network WEP WPA Authentication None WPA PSK TKIP WPA PSK AES WPA2 PSK TKIP WPA2 PSK AES For a wireless network with authentication setting select the authentication setting according to the security type of the wireless network For a wireless network without authentication setting select None None Set the authentication setting to None WEP Set the authentication setting to WEP WPA PSK TKIP Set the authentication setting to WPA PSK TKIP WPA PSK AES Set the authentication setting to WPA PSK AES WPA2 PSK TKIP Set the authentication setting to WPA2 PSK TKIP WPA2 PSK AES Set the authentication setting to WPA2 PSK AES 7 WEP WPA Key entry screen will appear Enter the WEP WPA key of the selected wireless network using cursor buttons number buttons and color key then press YELLOW Confirmation message will appear Select Yes to
80. to set a limit which prevents your children from viewing inappropriate materials Playback will be stopped if the ratings exceed the levels you set and it will require you to enter a password before playing back the disc Parental BD Rating Level pyar DVD Rating Level All Password Change 1 Use A V to select then press OK 2 Use the Number buttons to enter your 4 digit password For the first time use Use the Number buttons to enter any 4 digit number except for 4737 then press OK That number will be used as the password from the second time Record your password in case you forget it If you forget the password enter 4 7 3 7 The password will be cleared and rating level will be set to All While you input the password press CLEAR to clear the number then re enter the password 3 Proceed to A C A BD Rating Level 1 Use A w to select BD Rating Level then press OK 2 Use A to select your desired option then press OK All To release the limitation Age Setting To set the age limitation After selecting Age Setting use the Number buttons to enter the age from 0 254 e g for age 15 press 0 1 5 3 Press SETUP to exit B DVD Rating Level 1 Use A to select DVD Rating Level then press OK 2 Use A to select your desired level then press OK 3 Press SETUP to exit RATING EXPLANATIONS All Parental Control is
81. ton During playback press to fast reverse the playback 7 play button Press to start playback or resume playback 8 k skip button e During playback press once to return to the beginning of the current title chapter or track e During playback press twice to return to the previous title chapter or track e During the JPEG playback press to return to the previous file 9 H stop button e Press to stop playback 10 Number buttons Press to enter the title chapter track or file number Press to enter values in the input field 11 SEARCH button Press to display the search menu 12 REPEAT button Press to toggle between various repeat modes 13 OPEN CLOSE button Press to open or close the disc tray 14 POP MENU MENU button Press to display the pop up menu disc menu 15 OK button Press to confirm or select menu items 16 RETURN button Press to return to the previously displayed menu screen 17 forward button e During playback press to fast forward the playback In pause mode press to slow forward the playback 18 PPI skip button During playback press to skip to the next title chapter track or file 19 11 pause button Press to pause playback When playback is in pause mode press repeatedly to forward the playback step by step 20 DISPLAY button Press to display the on screen display menu 21 ANGLE button Press to access various c
82. unds etc HD Audio Output Only the primary audio will be output Set this mode in order to output Dolby Digital Plus Dolby TrueHD or DTS HD audio of BD through HDMI connection 3 Press RETURN to exit You can also set BD Audio Mode from the setup menu Refer to page 28 Note e In Mix Audio Output mode if there is no secondary and interactive audio the audio will be output as HD Audio Output mode NETWORK OPERATIONS VUDU Operations With this unit you can enjoy VUDU HD on demand movies TV episodes and Internet applications For complete instructions on using VUDU service please visit www vudu com docs to view an updated in depth online manual Before Activating VUDU Follow the following procedure before activating VUDU 1 Connect this unit to the Internet Refer to Connection to the Network on page 12 e Broadband Internet connection of 8 Mbps or faster is recommended 2 Set up the necessary network connection settings Refer to Network Connection on page 36 Activating VUDU After you set up the network connection you must set up a VUDU account and activate this unit before watching VUDU movies 1 Press RED while opening screen is displayed For opening screen refer to page 9 VUDU App Home screen will appear For the first time only Network Service Disclaimer screen will appear After confirming the content use lt 4

FUNAI MBP5120F/F7 User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents