Fujitsu Q2010 User's Manual
Contents
1. LBA Mode Control Enabled Enables or disables logical Block Addressing in place of Cylinder Head Sector addressing This option cannot be changed when Auto is selected it is auto matically selected Transfer Mode Multiword This option cannot be changed when Auto is selected it is automatically DMA 2 selected Selects the method for moving data to from the drive Autotype the drive to select the optimum transfer mode Ultra DMA Mode Disabled This option cannot be changed when Auto is selected it is automatically selected Selects the method for moving data to from the drive Autotype the drive to select the optimum transfer mode Exiting from Main Menu When you have finished setting the parameters on this menu you can either exit from the setup utility or move to another menu If you wish to exit from the setup utility press the Esc key or use the cursor keys to go to the Exit menu If you wish to move to another menu use the cursor keys po Q2000 Series BIOS ADVANCED MENU SETTING DEVICE FEATURE CONTROLS The Advanced Menu allows you to Set the keyboard and mouse features Select between the display panel and an external CRT display Enable or disable compensation for your display Enable or disable the IDE Bluetooth LAN and Wire less LAN controllers Configure CPU and USB features in your system See Navigating through the Setup Utility on page 2 for more info2. 11 pa Q2000 Series BIOS Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configuration submenu allows the user to enable or disable IDE Bluetooth LAN and Wireless LAN Controllers PhoenixBIOS Setup Utility Internal Device Configurations Item Specific Help Disabled IDE Controller Enabled A Bluetooth R Enabled IDR port de disabled LAN Controller Enabled Wireless LAN Enabled Enabled IDE port is enabled Help Select Item Change Values Setup Defaults Exit Select Menu Select gt Sub Menu Save and Exit Figure 6 Internal Device Configuration Submenu Table 6 Fields Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu Menu Field Options Default Description IDE Controller Disabled Enabled Enables or disables selected IDE devices Enabled Modem Controller Disabled Enabled Enables or disables Modem controller m Enabled LAN Controller a Disabled Enabled Enables or disables the LAN controller m Enabled Wireless LAN a Disabled Enabled Enables or disables the Wireless LAN controller Enabled 12 Advanced Menu CPU Features Submenu of the Advanced Menu The CPU Features submenu provides options for configuring the Intel SpeedStep power management features of the CPU PhoenixBIOS Setup Utility CPU Features Item Specific Help SpeedStep R Techno
3. 20 Security Chip Setting Submenu of the Security Menu The Security Chip Setting submenu is used to enable or disable the embedded security chip PhoenixBI0S Setup Utility Security Chip Setting Item Specific Help Security Chip Clear Security Chip Security Chip State Disabled Deactivated Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 14 Security Chip Setting Submenu Menu Field Options Default Description Security Chip Disabled Disabled Allows you to enable or disable the security chip Note that this is only active if Enabled a Supervisor Password has been entered A reboot is required after exit to con figure the Security Chip correctly Clear Security Chip option becomes select able after reboot Clear Security Chip Enter This field is not selectable until after the security chip is enabled and the system is rebooted Security Chip State Disabled Display only to indicate the state of the chip if it has been disabled or m Deactivated deactivated 21 poe Q2000 Series BIOS BOOT MENU SELECTING THE OPERATING SYSTEM SOURCE The Boot Menu is used to select the order in which the BIOS searches sources for the operating system Follow the instructions for Navigating Through the Setup Utility to make any changes See Navigating through the Setup Utility on page 2 for more information The followin
4. No is displayed Exit Discarding Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to the BIOS memory When the Changes BIOS recognizes this selection it will load the operating system and begin operation Load Setup Selecting Load Setup Defaults will load the factory preset default values for all menu fields then display the message Defaults Load default configuration now Yes No When confirmed the setup utility will return to the Exit Menu To return to another menu follow the directions in the Navigating Through the Setup Utility Section Discard Selecting Discard Changes will load the previous values in BIOS memory for all menu fields The message Load Changes previous configuration now Yes No will be displayed When confirmed the setup utility will return to the Exit menu To return to another menu follow the directions in the Navigating Through the Setup Utility Section Save Changes Selecting Save Changes will cause the new settings in all menus to be written to the BIOS memory The message Save configuration changes now Yes No will be displayed When confirmed the setup utility will return to the Exit menu To return to another menu follow the directions in the Navigating Through the Setup Utility section Save Changes and Power Off Selecting Save Changes and Power Off will cause the new settings in all menus to be written to the BIOS memory The messag
5. operating environment 8 Excluded from boot order USB MEMORY USB HDD Exiting from Boot Menu When you have finished setting the boot parameters with the Boot Menu you can either exit from the setup utility or move to another menu If you wish to exit from the setup utility press the Esc key to go to the Exit Menu If you wish to move to another menu use the cursor keys 24 INFO MENU DISPLAYS BASIC SYSTEM INFORMATION The Info Menu is a display only screen that provides the only and cannot be modified by the user except for the configuration information for your notebook Asset Number as in the Point below The following table shows the names of the menu fields for the Info menu and the information displayed in those fields These fields are for information purposes The information including CPU type and speed and total memory displayed on this screen varies according to the unit you purchased PhoenixBI0S Setup Utility BIOS Version 1 06 BIOS Date 05 17 2006 BIOS Area E000h FFFFh CPU Type Genuine Intel R CPU U1400 CPU Speed 1 20 GHz L1 Cache 64 KB L2 Cache 2048 KB Total Memory 512 MB Onboard 512 MB DDR2 SDRAM Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 17 Info Menu Table 17 Fields Options and Defaults for the Info Menu Note that the parameters listed in the following table may be different depending u
6. system will be read Every Boot from a disk When set to Every Boot a password User or Supervisor is required every time after the Power On Self Test POST before the operating system will be read from a disk When set to Disabled no password is required On Automatic Disabled Disabled When disabled password entry is not required when the system wakes up auto Wake up m Enabled matically When enabled password entry is required upon wake up KB Lock on Disabled Disabled When set to Enabled the PS 2 mouse and keyboard inputs are locked out upon Resume Enabled Resume from Suspend or Save to Disk mode until you enter the password When set to Disabled no password is required If no Supervisor Password is set this feature is not available and no password is required Boot from All All Supervisor only allows access to boot the computer to removable media after Removable Media m Supervisor only the Supervisor Password is entered Flash Write Disabled Enabled When disabled the BIOS Flash memory will be write protected Enabled Hard Disk Security Configures hard disk security features Owner Sets Owner information Information Security Chip Setting Opens the Security Chip Setting submenu to configure the Security Chip Exiting from the Security Menu When you have finished setting the parameters on the Security Menu you can either exit from s
7. 2 key See Using the TrustedCore Menu on page 2 for more information PhoenixBI0S Setup Utility Boot Device Priority Item Specific Help Boot priority order Keys used to view or 1 Floppy Disk Drive configure devices Drive0 TOSHIBA MK6006GAH CD DVD Drive lt gt lt Space gt or lt gt NETWORK B02 DOO Yukon PXE sen o GOTEO e ez down lt x gt exclude or include the device to boot 8 Excluded from boot order USB MEMORY None USB HDD None Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 16 Boot Device Priority Submenu 23 ae Q2000 Series BIOS Table 16 Fields Options and Defaults for the Boot Device Priority Submenu of the Boot Menu Menu Field Description Boot priority order The boot selections determine the order in which the BIOS searches for the operating system during a 1 Floppy Disk Drive startup sequence To change the order highlight one source by using the up or down cursor keys and 2 DriveO then press the or key to change the order number Tapping x removes from the list a device that is 3 CD DVD Drive not installed Tapping x on an item in the Excluded list adds the device to the Boot priority list Be sure to 4 NETWORK save your changed order when you exit the BIOS setup utility 5 6 NOTE Be aware that if you use the CD ROM drive as the first boot device certain files may be 7 overwritten depending upon your
8. Advanced Menu The USB Features submenu provides options for enabling or disabling the USB drive Advanced PhoenixBIOS Setup Utility USB Features Item Specific Help Legacy USB Support SCSI SubClass Support Enabled Disabled Enabled The feature is disabled Select Item Select Menu Enabled Legacy USB Emulation is enabled and USB devices are available without USB aware OS Change Values Setup Defaults Select gt Sub Menu Save and Exit Figure 8 USB Features Submenu Table 8 Fields Options and Defaults for the USB Features Submenu of the Advanced Menu Menu Field Options Default Description Legacy USB Support Disabled Enabled When Enabled is selected Legacy USB Emulation is enabled Enabled and the USB devices are available without a USB aware OS When Disabled is selected Legacy USB support is disabled SCSI SubClass Support Disabled Enabled When Enabled is selected USB devices that belong to the Enabled SCSI subclass in the mass storage class e g USB Memory Key are enabled Note that enabling this feature may cause the system to hang during POST depending on the device that is connected 14 Advanced Menu Miscellaneous Configurations Submenu of the Advanced Menu The Miscellaneous Configurations submenu provides options for enabling or disabling the power button and the Wake Up On LAN feature and setting the volume video memory size and Hardwar
9. Diagnostic Screen Boot Menu Patent Information System Information Continue Booting Clicking on any of the fields will invoke the screen information or action described The Boot Menu can also be invoked by pressing the F12 key when the Fujitsu logo appears on the screen Navigating through the Setup Utility The BIOS setup utility consists of six menus Main Advanced Security Boot Info and Exit This document 2 explains each menu in turn including all submenus and setup items The following procedures allow you to navigate the setup utility menus 1 To select a menu use the cursor keys lt gt 2 To select a field within a menu or a submenu use the cursor keys h j 3 To select the different values for each field press the Spacebar or to change to the next lower selection and F5 or to go to the next higher selection 4 To activate a submenu press the Enter key 5 To return to a menu from a submenu press the Esc key 6 To go to the Exit menu from any other menu press the Esc key Selecting a field causes a help message about that field to be displayed on the right hand side of the screen Pressing the Enter key with the highlight on a selection that is not a submenu or auto selection will cause a list of all options for that item to be displayed Pressing the Enter key again will select the highlighted choice 7 Pressing the F9 key resets all
10. When On or Off Numlock is on or off When On Padlock Off is selected Numlock is on but Fn key must be pressed used for 10 key On Padlock Off sa input Windows XP preserves Numlock state when the user logs off 10 Advanced Menu Video Features Submenu of the Advanced Menu The Video Features submenu is for setting the display parameters PhoenixBI0S Setup Utility Advanced Video Features Item Specific Help Display Auto Select display terminal Compensation Enabled This setting is not effective after operating system starts up Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 5 Video Features Submenu Table 5 Fields Options and Defaults for the Video Features Submenu of the Advanced Menu Menu Field Options Default Description Display Internal Auto Selects where the video signal will be routed Note that this setting is overrid Flat Panel den after Windows starts up External Auto Compensation Disabled Enabled Enables or disables compensation which controls spacing on the display When Enabled enabled displays with less than pixel resolutions of 1024 x 768 or 800 x 600 will still cover the entire screen A resolution below 800 x 600 will fill the screen but due to the low resolution will appear blocky and may not be acceptable Note that this setting is overridden after Windows starts up
11. cO FUJITSU Fujitsu LifeBook Q2000 Series BIOS Guide LifeBook Q Series Model Q2010 Document Date 06 09 06 Document Part Number FPC58 1522 01 FUJITSU COMPUTER SYSTEMS pa Q2000 Series BIOS Q2000 Series BIOS BIOS SETUP UTILITY The BIOS Setup Utility is a program that sets up the operating environment for your notebook Your BIOS is set at the factory for normal operating conditions therefore there is no need to set or change the BIOS environment to operate your notebook The BIOS Setup Utility configures Device control feature parameters such as changing I O addresses and boot devices System Data Security feature parameters such as passwords Entering the BIOS Setup Utility To enter the BIOS Setup Utility do the following or use the TrustedCore Menu as detailed in the next section 1 Turn on or restart your notebook 2 Press F2 once the Fujitsu logo appears on the screen This will open the main menu of the BIOS Setup Utility with the current settings displayed 3 Press the RIGHT ARROW or LEFT ARROW key to scroll through the other setup menus to review or alter the current settings Using the TrustedCore Menu When the Fujitsu logo appears on the screen press the Enter key or click on the left mouse or touchpad button the TrustedCore Menu will appear The TrustedCore Menu provides shortcuts to the following menus and information screens BIOS Setup
12. e Power Management PhoenixBIOS Setup Utility Advanced Miscellaneous Configurations Item Specific Help Power Button Configures the power Wake up on LAN Disabled button Force LAN Boot Disabled Volume Setting Middle UMA Video Memory Size 128MB Hardware Power Management Enabled ACPI OS ignores this setting Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 9 Miscellaneous Configurations Submenu Table 9 Fields Options and Defaults for the Miscellaneous Configurations Submenu of the Advanced Menu Menu Field Options Default Description Power Button Disabled Disabled Selecting Disabled disables the power button Selecting Power Off allows m Power Off you to turn off system power with the power button Wake up on LAN Disabled Disabled Selecting Enabled allows the system to wake up when the internal LAN Enabled device receives a specific signal while in power off state Selecting Disabled disables this feature Force LAN Boot Disabled Disabled This feature is active only when Wake up on LAN is enabled When Enabled enabled in the event of a system wake up on LAN the system will try to first boot from the LAN before attempting to boot from any other device regardless of the BIOS boot priority settings or disabling of the Preboot Execution Environment Volume Setting Off Middle Selects the initial volu
13. e Save configuration changes and power off now Yes No will be displayed When con firmed the system will shut down If No is selected the system will return to the Exit menu To return to another menu follow the directions in the Navigating Through the Setup Utility section 26
14. en set to disabled entry of a Hard Disk Password is not required before OS boot Boot Enabled The hard disk is still password protected without password entry 19 pa Q2000 Series BIOS Owner Information Submenu of the Security Menu The Owner Information submenu is for setting owner information Note that the owner information cannot be set without having entered a Supervisor Password PhoenixBIOS Setup Utility Owner Information Item Specific Help Owner Information Is Clear Set Owner Information Enter Foreground Color Background Color Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 13 Owner Information Submenu Table 13 Fields Options and Defaults for the Owner Information Submenu of the Security Menu Menu Field Options Default Description Owner Information Clear Display only Is Set Owner Enter Field to write owner informa Information tion i e name Foreground Color Black m Brown m Light Cyan Gray Set foreground color Blue White Light Red Green m Gray Light Magenta m Cyan Light Blue Yellow Red m Light Green E Bright White Magenta Background Color Black Brown m Light Cyan Black Set background color Blue White Light Red m Green m Gray Light Magenta m Cyan a Light Blue m Yellow Red Light Green m Bright White Magenta
15. erating system will be opened If an error message is displayed on the screen and you want to enter the setup utility press the F2 key When the setup utility starts with a fault present the system displays the following message Warning Error message Continue Press any key to enter the setup utility The system will then display the Main Menu with current parameters values yore Q2000 Series BIOS MAIN MENU SETTING STANDARD SYSTEM PARAMETERS The Main Menu allows you to set or view the current the field s function and any special information needed system parameters See Navigating through the Setup to help understand the field s use Utility on page 2 for more information System Time and System Date can also be The following tables show the names of the menu fields set from your operating system without for the Main menu and its submenus all of the options using the setup utility Use the Date and for each field the default settings and a description of Time icon on your Windows Control panel or type time or date from the MS DOS prompt PhoenixBIOS Setup Utility Advanced Security Boot Info Item Specific Help Adjust calendar clock System Time HE 57 01 System Date 06 01 2006 p gt Drivel TOSHIBA MK6006GAH lt Tab gt lt Shift Tab gt or lt Enter gt selects field Language English US Select Item Change Values Setup Defaults Select Menu Select g
16. etup utility or move to another menu If you wish to exit from setup utility press the Esc key to go to the Exit Menu If you wish to move to another menu use the cursor keys 18 Hard Disk Security Submenu of the Security Menu The Hard Disk Security submenu is for configuring hard disk security features PhoenixBIOS Setup Utility Hard Disk Security Item Specific Help Drive0 Password Is Clear Set Drive0 Password Enter Password Entry on Boot Enabled Select Item Change Values Setup Defaults Select Menu Select Sub Menu Save and Exit Figure 12 Hard Disk Security Submenu Table 12 Fields Options and Defaults for the Hard Disk Security Submenu of the Security Menu Menu Field Options Default Description DriveO Password Is Clear Display only Default is Clear When the DriveO Password has been set the field changes to Set When this password is set the primary hard disk drive cannot be used in another system unless the password is entered Set DriveO Enter Sets changes or cancels the DriveO Master Password The DriveO Master Password Password may be up to seven characters long and must include only letters or numbers no symbols Passwords are NOT case sensitive When a DriveO Master Password is set it must be used to access the hard drive if it is used in another system Note that the password will not take effect until the system has been rebooted Password Entry on Disabled Enabled Wh
17. f the Power Management Security is Enabled and the Password on Boot is Dis abled you will not have to type your Remember your passwords If you set and forget your User and Master hard disk passwords Fujitsu Computer Systems will not be able to reset it You may lose data password upon resuming the system and have to replace your system board or from the Suspend or Save to Disk hard disk drive modes Power Management Security will work only if Password boot is enabled PhoenixBIOS Setup Utility Main Advanced Security Boot Info Exit Item Specific Help Supervisor Password Is Clear User Password Is Clear Press lt Enter gt key to Set Supervisor Password Enter set Supervisor Password Set User Password E r to enable any password Minimum User Password Length features Password on Boot On Automatic Wake up D Then password entry is KB Lock on Resume I dl required to enter BIOS Boot from Removable Media A11 Setup Flash Write E led gt Hard Disk Security gt Owner Information gt Security Chip Setting Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 11 Security Menu 17 poe Q2000 Series BIOS Table 11 Fields Options and Defaults for the Security Menu Menu Field Options Default Description Supervisor Clear A display only field Set is displayed when the system supervisor password is set Password is and Clear when
18. g tables show the names of the menu fields for the Boot menu and its submenu all of the options for each field the default settings and a description of the field s function and any special information needed to help understand the field s use PhoenixBIOS Setup Utility Quick Boot Boot Time Diagnostic Screen Boot Menu E 1l Enabled Preboot Execution Environment gt Boot Device Priority Select Item Select Menu Enabled Disabled abled Change Values Select gt Sub Menu Item Specific Help Disabled All diagnostic tests will be done Enabled Some diagnostic tests may be skipped while booting to speed up Setup Defaults Save and Exit Figure 15 Boot Menu Table 15 Fields Options and Defaults for the Boot Menu 22 Menu Field Options Default Description QuickBoot Disabled Enabled Turns on and off booting with a truncated set of Power On Self Test m Enabled Fewer tests mean faster startup Boot time Disabled Disabled Turns on and off display of test results instead of Fujitsu logo screen Diagnostic Screen m Enabled during Power On Self Test Boot Menu m Disabled Enabled When Disabled the Boot Menu is disabled and the F12 key is m Enabled ignored When Enabled the Boot Menu is enabled This field is only active when the Supervisor s password has been set Preboot Execution Disabled Disabled Turns on and off the preboot execution en
19. it is not User Password is Clear A display only field Set is displayed when the general user password is set and Clear when it is not Set Supervisor Enter Sets changes or cancels the Supervisor Password The Supervisor Password may Password be up to eight characters long and must include only letters or numbers no symbols Passwords are NOT case sensitive To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re enter New Password field When a Supervisor Password is set it must be used to access the BIOS setup utility Set User Password Enter This field can only be accessed if the Supervisor Password is set Sets changes or cancels the User Password A User Password may be up to eight characters long and must include only letters or numbers no symbols Passwords are NOT case sensitive To cancel a password press Enter key instead of entering char acters in the Enter New Password field and in the Re enter New Password field When a User Password is set it must be used to access the BIOS setup utility Minimum User 0 Supervisor can set password length 0 to 8 for user password User cannot set a Password Length password shorter than the minimum length Password on Boot Disabled Disabled When set to First Boot a password User or Supervisor is required just once m First Boot after the Power On Self Test POST before the operating
20. items in the BIOS to the default values 8 Pressing the F10 key saves the current configura tion and exits the BIOS Setup Utility You will be asked to verify this selection before it is executed 9 Pressing the F1 key gives you a general help screen Entering the Setup Utility After a Configuration Change or System Failure If there has been a change in the system configuration that does not agree with the parameter settings stored in your BIOS memory or there is a failure in the system the system beeps and or displays an error message after the Power On Self Test POST If the failure is not too severe it will give you an opportunity to modify the setup utility settings as described in the following steps When you turn on or restart the computer there is a beep and or the following message appears on the screen Error message please run SETUP program Press lt F1 gt key to continue lt F2 gt to run SETUP Ifan error message is displayed on the screen and you want to continue with the boot process and start the operating system anyway press the F1 key If your notebook emits a series of beeps that sounds like a code and the display is blank please refer to the Troubleshoot ing Section in the system User s Guide The Troubleshooting Section includes a list of error messages and their meanings If your data security settings require it you may be asked for a password before the op
21. logy Risto Select Enhanced On Battery Battery Optimized Intel R SpeedStep R On AC Maximum Performance Technology enabled or disabled XD Bit functionality Enabled Help Select Item Change Values Setup Defaults Exit Select Menu Select gt Sub Menu Save and Exit Figure 7 CPU Features Submenu Table 7 Fields Options and Defaults for the CPU Features Submenu of the Advanced Menu Menu Field Options Default Description SpeedStep R Disabled Enabled Enables or disables the SpeedStep R Technology features When Technology m Enabled disabled On Battery and On AC are disabled On Battery Maximum Battery When Maximum Performance is selected CPU speed is maxi Performance Optimized mized When Battery Optimized is selected CPU power require m Battery Optimized ments are optimized for battery operation When Automatic is m Automatic selected the CPU speed is determined by the power source used On AC Maximum Maximum When Maximum Performance is selected CPU speed is maxi Performance Performance mized When Battery Optimized is selected CPU power require m Battery Optimized ments are optimized for battery operation When Automatic is m Automatic selected the CPU speed is determined by the power source used XD Bit Enabled Enabled Enables or disables the Execute Disable Bit feature functionality Disabled 13 yore Q2000 Series BIOS USB Features Submenu of the
22. me setting for the system Minimum Middle Maximum UMA Video Memory Size 64MB 128MB Allows you to select the maximum shared video memory size Video 128MB memory is dynamically allocated as needed for running applications by 224MB Dynamic Video Memory Technology DVMT Hardware Power Disabled Enabled Allows you to enable or disable the Hardware Power Management feature Management m Enabled 15 po Q2000 Series BIOS Event Logging Submenu of the Advanced Menu The Event Logging submenu configures event logging features for DMI events PhoenixBIOS Setup Utility Advanced a aS SE Event Log Capacity Space Available Press lt Enter gt key to Event Log Validity Valid view the contents of the event log View Event Log Enteri Event Logging Enabled System Boot Event Disabled Clear A11 Event Logs No Mark Events as Read Enter Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 10 Event Logging Submenu Table 10 Fields Options and Defaults for the Event Logging Submenu of the Advanced Menu Menu Field Options Default Description Event Log Capacity Space Available Display only Event Log Validity Valid Display only View Event Log Enter Enter Allows you to view content of event log Event Logging Disabled Enabled Turns event logging on and off for all DMI events Enabled Sys
23. ng differs between the US European and the Japanese JP Japanese model Selects the display language for the BIOS yore Q2000 Series BIOS DriveO Submenu of the Main Menu The Drive0 submenu identifies what ATA devices are installed PhoenixBIOS Setup Utility Drive0 TOSHIBA MK6006GAH Item Specific Help Type LBA Format Total Sectors Maximum Capacity Multi Sector Transfers LBA Mode Control Transfer Mode Ultra DMA Mode 117210240 60012MB 16 Sectors Enabled Multiword DMA 2 Disabled Select Serial ATA IDE drive installed here Auto The BIOS auto types the drive on boot time None The drive is disabled Select Item Select Menu Change Values Select gt Sub Menu Setup Defaults Save and Exit Figure 2 DriveO Master Submenu Table 2 Fields Options and Defaults for the DriveO Submenu of the Main Menu Menu Field Options Default Description Type Auto Auto Selects the hard drive device type Select Auto to have the type automatically m None identified by the BIOS at POST If None is selected all of the following Setup items do not appear LBA Format Logical Block Addressing LBA Total Sectors The total number of sectors on your hard disk Maximum Capacity The maximum capacity of your hard disk Multi Sector Transfers 16 Sectors This option cannot be changed when Auto is selected it is automatically selected
24. optimization performance features Advanced Menu Table 3 Fields Options and Defaults for the Advanced Menu Menu Field Description USB Features When selected opens the USB Features submenu to allow you to enable or disable legacy USB devices and SCSI SubClass support Miscellaneous Configurations When selected opens the Miscellaneous Configurations submenu to allow you to enable or disable the power button Wake Up On LAN control volume settings set video memory size and enable or disable hardware power management Event Logging When selected opens the event logging submenu pa Q2000 Series BIOS Keyboard Mouse Features Submenu of the Advanced Menu The Keyboard Mouse Features submenu is for turning the Numlock feature on and off PhoenixBIOS Setup Utility Advanced Keyboard Mouse Features Item Specific Help Numlock PER On or Off Numlock is On or Off On Padlock Off Numlock is On but use with Fn for 10 key input Windows XP preserves Numlock state when the user logs off Help Select Item Change Values Setup Defaults Exit Select Menu Select gt Sub Menu Save and Exit Figure 4 Keyboard Mouse Features Submenu Table 4 Fields Options and Defaults for the Keyboard Mouse Submenu of the Advanced Menu Menu Field Options Default Description Numlock On Off Sets the NumLock function state when the computer completes boot Off ing
25. pon the system configuration Menu Field Default Menu Field Default BIOS Version 1 06 L1 Cache 64 KB BIOS Date 05 17 2006 L2 Cache 2048 KB BIOS Area EO00h FFFFh Total Memory 512 MB CPU Type Genuine Intel R CPU U1400 Onboard 512 MB DDR2 SDRAM CPU Speed 1 20 GHz 25 poe Q2000 Series BIOS EXIT MENU LEAVING THE SETUP UTILITY The Exit Menu is used to leave the setup utility Follow The following table shows the names of the menu fields the instructions for Navigating Through the Setup for the Exit menu the default settings and a description Utility to make any changes See Navigating through the of the field s function and any special information Setup Utility on page 2 for more information needed to help understand the field s use PhoenixBIOS Setup Utility Item Specific Help Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes Save Changes and Power Off Exit System Setup and save your changes to CMOS Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 18 Exit Menu Table 18 Fields Options and Defaults for the Exit Menu Menu Field Description Exit Saving Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS memory then exit Changes the utility A confirmation message Save Configuration changes and exit now Yes
26. rmation The following tables show the names of the menu fields for the Advanced Menu and its submenus all of the options for each field the default settings and a descrip tion of the field s function and any special information needed to help understand the field s use PhoenixBIOS Setup Utility Advanced Security gt Keyboard Mouse Features gt Video Features gt Internal Device Configurations gt CPU Features gt USB Features gt Miscellaneous Configurations p gt Event Logging Select Item Select Menu Change Values Select gt Sub Menu Boot Info Exit Item Specific Help Configures keyboard mouse features Setup Defaults Save and Exit Figure 3 Advanced Menu Table 3 Fields Options and Defaults for the Advanced Menu Menu Field Description Keyboard Mouse Features When selected opens the Keyboard Mouse Features submenu which allows setting external and inter nal keyboard and mouse parameters Video Features When selected opens the Video Features submenu which allows setting of the display parameters including routing of video signals to different displays Internal Device Configurations When selected opens the Internal Device Configuration submenu which allows enabling or disabling the IDE Bluetooth LAN and WLAN Controllers CPU Features When selected opens the CPU Features submenu to allow you to configure the CPU speed for battery life
27. t Sub Menu Save and Exit Figure 1 Main Menu Table 1 Fields Options and Defaults for the Main Menu Note that the parameters listed in the following table may vary depending upon your system s configuration Menu Field Options Default Description System Time Sets and displays the current time Time is in a 24 hour format of hours minutes seconds with 2 digits for each HH MM SS Example 16 45 57 You may change each segment of the time separately Move between the segments with the Tab key and or Shift Tab keys System Date Sets and displays the current date Date is in a month day year numeric format with 2 digits each for month and day and 4 digits for year MM DD YYYY for example 03 20 1998 You may change each segment of the date separately Move between the segments with the Tab key and or Shift Tab keys Table 1 Fields Options and Defaults for the Main Menu Note that the parameters listed in the following table may vary depending upon your system s configuration Menu Field Options Default Description DriveO Selects the DriveO The product Display the type of device on this serial ATA IDE interface Pressing Serial ATA drive number of the hard the Enter key selects the DriveO submenu allowing additional device submenu drive configuration options for this interface Language English US English US The default setti
28. tem Boot Event Disabled Disabled Turns event logging on and off for DMI system boot events Enabled Clear All Event Logs No No When set to Yes all event logs will be cleared at next boot m Yes Mark Events as Read m Enter Enter Lets you mark all events currently in the event log as having been read 16 SECURITY MENU SETTING THE SECURITY FEATURES The Security menu allows you to set up the data security features of your notebook to fit your operating needs Entering a password incorrectly 3 times in a row causes the keyboard and mouse to and to view the current data security configuration See be locked out and the warning System Navigating through the Setup Utility on page 2 for more Disabled to be displayed If this hap information pens restart the computer by turning the power on and off with the power switch The following tables show the names of the menu fields and use the correct password on reboot for the Security Menu and its submenus all the options for each field the default settings and a description of the field s function and any special information needed to help understand the field s use The default condition is no passwords required and no write protection If you make an error when re entering the password a Warning will display on the screen To try again press Enter then retype the password Press Esc to abort the password setting process I
29. vironment feature Environment Enabled Boot Device This menu allows setting up the source for the operating system Priority See The Boot Device Priority Submenu in the following section Boot Device Priority Submenu of the Boot Menu The Boot Device Priority submenu is for setting the order of checking of sources for the operating system Be aware of the operating environment when booting from a CD or you may overwrite files by mistake A bootable CD ROM has either a floppy disk or a hard drive format When a bootable CD ROM is used drive allocations change automatically without changing the BIOS setup If floppy disk format is used the CD ROM becomes Drive A The CD ROM will only take drive C hard drive format if the internal hard drive is not present or is disabled A bootable CD ROM cannot use a C designation if a formatted internal hard drive is present since the C designator is always reserved for the internal hard drive The boot MN sequence ignores new drive designations but your application software will use the new designations In order for a portable USB memory device e g JumpDrive or memory stick to be recognized in the Boot Device Priority list it must have been installed before booting the system Note that some older portable USB memory devices may not be recognized as bootable devices The Boot Menu can also be invoked outside of the Setup Utility using the TrustedCore menu or the F1
Download Pdf Manuals
Related Search