Fujitsu P7010 User's Manual
Contents
1. Controller Fingerprint sensor Enabled Auto Enabled Disabled No IDE ports are enabled Primary Only primary IDE port is enabled Secondary Only secondary IDE port is enabled Both Both primary and secondary ports are enabled Figure 7 Internal Device Configurations Submenu Table 7 Fields Options and Defaults for the Internal Device Configurations Submenu of Advanced Menu Menu Field Options Default Description IDE Controller e Disabled Both Enables or disables selected IDE devices e Primary e Secondary e Both Modem e Disabled Enabled Enables or disables the modem device Controller e Enabled LAN Controller e Disabled Auto Enables or disables LAN controller When Auto is selected e Enabled the LAN device is always enabled when AC power is e Auto applied when running on battery power the device is enabled only when the link is active Fingerprint e Disabled Enabled Enables or disables the fingerprint sensor sensor e Enabled 13 ree P7000 Notebook BIOS CPU Features Submenu of the Advanced Menu The CPU Features submenu configures certain features of the CPU in the system Advanced CPU Features Item Specific Help SpeedStep R Technology Enabled On Battery Battery Optimized Select Enhanced On AC Maximum Performance Intel R SpeedStep R Technology enabled or disabled Figure 8 CPU Features Submenu Table 8 F2. Gray e Light e Cyan e Light Blue Magenta e Red Light e Light Yellow e Magenta Green e Bright White 21 ree P7000 Notebook BIOS BOOT MENU SELECTING THE OPERATING SYSTEM SOURCE The Boot Menu is used to select the order in which the BIOS searches sources for the operating system Follow the instructions for Navigating Through the Setup Utility to make any changes The tables show the names of the menu fields for the Boot menu and its submenu all of the options for each field the default settings and a description of the field s function and any special information needed to help understand the field s use Quick Boot Boot Time Diagnostic Screen Boot Menu Preboot Execution Environment gt Boot Device Priority Space Enter Item Specific Help Enabled Disabled Enabled Disabled Disabled All diagnostic tests will be done Enabled Some diagnostic tests may be skipped while booting to speed up Figure 15 Boot Menu Table 15 Fields Options and Defaults for the Boot Menu Menu Field Options Default Description QuickBoot e Disabled Enabled Turns on and off booting with a truncated set of Power e Enabled On Self Test Fewer tests mean faster turn on Boot time Diagnostic e Disabled Disabled Turns on and off display of test results instead of Fujitsu Screen e Enabled logo screen during Power On Self Test Boot Menu e Disabled Enabled This field is not acti
3. Password Passwords are NOT case sensitive To cancel a password press the Enter key instead of entering characters in the Enter New Password field and in the Re enter New Pass word field When a Primary Master Password is set it must be used to access the hard disk Data on the hard disk cannot be read on other systems Password Entry Enabled When set to Disabled it is not necessary to enter a Hard Disk Password before booting the OS The hard disk is still password protected without password entry 20 Owner Information Submenu of the Security Menu The Owner Information submenu is for setting owner information Owner Information Item Specific Help Owner Information Is Clear Set Owner Information Enter Foreground Color Gray Background Color Black Figure 14 Owner Information Submenu Table 14 Fields Options and Defaults for the Owner Information Submenu of the Security Menu Menu Field Options Default Description Owner Information Is Clear Display only Will only be displayed if the Supervisor Password is set Set Owner Enter Field to write owner Information information i e name Foreground Color e Black e Brown e Light Cyan Gray e Blue e White e Light Red e Green e Gray e Light e Cyan e Light Blue Magenta e Red Light e Light Yellow e Magenta Green e Bright White Background Color e Black e Brown e Light Cyan Black e Blue e White e Light Red e Green e
4. and in the Re enter New Password field When a Supervisor Password is set it must be used to access the BIOS setup utility Set User Password Enter Can only be accessed if Supervisor Password is set Sets changes or cancels User Password User Password may be up to seven characters long and must include only letters or numbers no symbols Passwords are NOT case sensitive To cancel a password press the Enter key instead of entering characters in the Enter New Password and Re enter New Password fields When a User Password is set it must be used to access the BIOS utility Minimum User Password Length 0 Can only be accessed if Supervisor Password is set Set the minimum length for User Password Password on Boot e Disabled e First Boot e Every Boot Disabled When set to Disabled no password is required When set to First Boot password entry required only before first boot When Every Boot is selected password required whenever the system is booted KB Lock on Resume e Disabled e Enabled Disabled When Enabled PS 2 keyboard or mouse inputs are locked out at Resume From Suspend or Save to Disk until entering password Boot from Removable Media e All e Supervisor only All When Supervisor Only is selected only the Supervisor can boot from removable media Only the user who enters the Supervisor Password before OS boot is treated as the Supervisor When All is selected
5. field within a menu or a submenu use the cursor keys 4 JI iF e Selecting a field causes a help message about that field to be displayed on the right hand side of the screen e Pressing Enter with the highlight on a selection that is not a submenu or auto selection will cause a list of all options for that item to be displayed Pressing the Enter key again will select the high lighted choice G 3 To select the different values for each field press the Spacebar or to change to the next higher selec tion and F5 or to go to the next lower selection 4 To activate a submenu press Enter 5 To return to a menu from a submenu press Esc 6 To go to Exit menu from another menu press Esc 7 Pressing the F9 key resets all items in the BIOS to the default values 8 Pressing the F10 key saves the current configura tion and exits the BIOS Setup Utility You will be asked to verify this selection before it is executed 9 Pressing the F1 key gives you a general help screen Entering the Setup Utility After a Configuration Change or System Failure If there has been a change in system configuration that does not match the parameter settings stored in your BIOS memory or there is a failure in the system the system beeps and or displays an error message after the Power On Self Test POST If the failure is not severe it will give you the opportunity to modify the settings of
6. Advanced Menu Table 4 Fields Options and Defaults for the Advanced Menu Menu Field Description Keyboard When selected opens the Keyboard Mouse Features submenu which allows setting NumLock Mouse Features Video Features When selected opens the Video Features submenu which allows setting of the display parameters including routing of video signals to different displays Internal Device When selected opens the Internal Device Configurations submenu which allows enabling or dis Configurations abling the IDE LAN and modem controllers CPU Features When selected opens the CPU Features submenu which allows configuration of CPU performance features eo P7000 Notebook BIOS Table 4 Fields Options and Defaults for the Advanced Menu Menu Field Description USB Features When selected opens the USB Features submenu which allows enabling or disabling USB and SCSI Subclass support Miscellaneous Configurations When selected opens the Miscellaneous Configurations submenu which allows you to change the power button Wake Up On LAN and Volume settings Event Logging When selected opens the Event Logging submenu which lets you view and enable the event log 10 Advanced Menu Keyboard Mouse Features Submenu of the Advanced Menu The Keyboard Mouse Features submenu is for setting the condition of the NumLock button Advanced Keyboard Mouse Features
7. B devices that belong to the Support Enabled SCSI subclass in the mass storage class e g USB Memory Key are enabled Note that enabling this feature may cause the system to hang during POST depending on the device that is connected 15 roe P7000 Notebook BIOS Miscellaneous Configurations Submenu of the Advanced Menu The CPU Features submenu configures certain features of the CPU in the system Advanced Miscellaneous Configurations Item Specific Help Power Button Wake up on LAN Volume Setting Chipset Setup Disabled Disabled Middle Normal Configures the power button ACPI OS ignores this setting Figure 10 Miscellaneous Configurations Submenu Table 10 Fields Options and Defaults for the Miscellaneous Configurations Submenu a Power Save Menu Field Options Default Description Power Button e Disabled Disabled When Disabled is selected pressing the power button does e Power Off not affect power When Enabled is selected pressing the button powers off the system Wake up e Disabled Disabled When Enabled is selected the system will wake up when on LAN e Enabled the internal LAN receives a Magic Packet while it is powered off Volume Setting Off Middle Allows you to set or disable the system volume level a Minimum Middle Maximum Chipset Setup Normal Normal This allows you to select the power saving mode for the chips
8. F9 key then display the message Load default configuration now Yes No When confirmed the setup utility will return to the Exit Menu To return to another menu follow the directions in the Navigating through the Setup Utility section 25 roves P7000 Notebook BIOS Table 18 Fields Options and Defaults for the Exit Menu 26 Menu Field Shortcut Description Discard Selecting Discard Changes will load the previous values in BIOS memory for all menu fields Changes The message Load previous now Yes No will be displayed When confirmed the setup utility will return to the Exit menu To return to another menu follow the directions in the Navigating through the Setup Utility section Save Selecting Save Changes will cause the new settings in all menus to be written to the BIOS Changes memory The message Save configuration changes now Yes No will be displayed When confirmed the setup utility will return to the Exit menu To return to another menu follow the directions in the Navigating through the Setup Utility section
9. IOS Table 3 Fields Options and Defaults for the Secondary Master Submenu of the Main Menu Menu Field Options Default Description Sectors e A number This item appears only when the type is identified as Auto or between 0 Hard Disk When Hard Disk is selected you can change the and 63 value This field is changed by incrementing pressing the Spa cebar or by typing in the number Maximum e Display only Displays the maximum capacity of the drive calculated from the Capacity parameters of the hard disk when Hard Disk is selected Multi Sector Disabled Disabled This option cannot be changed when Auto is selected Specify Transfers e 2 Sectors the number of sectors per block for multiple sector transfer e 4 Sectors e 8 Sectors e 16 Sectors LBA Mode e Disabled Disabled Enables or disables logical Block Addressing in place of Cylinder Control e Enabled Head Sector addressing This option cannot be changed when Auto is selected Transfer e Standard Standard Selects the method for moving data to from the drive Autotype Mode e Fast PIO 1 the drive to select the optimum transfer mode This option can e Fast PIO 2 not be changed when Auto is selected Multi word DMA is e Fast PIO 3 automatically set to mode 1 for Fast PIO 1 Fast PIO 2 Fast PIO e Fast PIO 4 3 and set to mode 2 for Fast PIO 4 DMA e Multiword DMA 1 e Multiword DMA 2 Ultra DMA e Disabled Disabled Selects the method for m
10. Item Specific Help Numlock off Select power on state for Numlock Figure 5 Keyboard Mouse Features Submenu Table 5 Fields Options and Defaults for the Keyboard Mouse Features Submenu of the Advanced Menu Menu Field Options Default Description Numlock e On Off Sets the NumLock function state when the computer Off completes booting e On Padlock Off 11 ree P7000 Notebook BIOS Video Features Submenu of the Advanced Menu The Video Features Submenu is for setting the display parameters Advanced Video Features Item Specific Help Display Auto Compensation Enabled Select display terminal Figure 6 Video Features Submenu Table 6 Fields Options and Defaults for the Video Features Submenu of the Advanced Menu Menu Field Options Default Description Display e Internal Flat Panel Auto Selects where the video signal will be routed e External e Auto Compensation e Disabled Enabled Enables or disables compensation which controls spacing e Enabled on the display When enabled displays with less than pixel resolution 800 x 600 will still cover the entire screen 12 Advanced Menu Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configurations submenu allows the user to configure other internal devices Advanced Internal Device Configurations Item Specific Help IDE Controller Modem Controller LAN
11. Memory 512 MB CPU Type ULV Intel R Pentium R M Memory Slot 1 512 MB DDR SDRAM CPU Speed 1 10 GHz Memory Slot 2 None 24 EXIT MENU LEAVING THE SETUP UTILITY The Exit Menu is used to leave the setup utility Follow the instructions for Navigating through the Setup Utility to make any changes The table shows the names of the menu fields for the Exit menu and a description of the field s func tion and any special information needed to help understand the field s use Item Specific Help Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes Exit System Setup and save your changes to CMOS Space Enter Figure 18 Exit Menu Table 18 Fields Options and Defaults for the Exit Menu Menu Field Shortcut Description Exit Saving Press the Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to Changes F10 key the BIOS memory and then exit the setup utility A confirmation message Save Configura tion changes and exit now Yes No will be displayed Exit Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to the Discarding BIOS memory When the BIOS recognizes this selection it will load the operating system Changes and begin operation Load Setup Press the Selecting Load Setup Defaults will load the factory preset default values for all menu fields Defaults
12. S SECURITY MENU SETTING THE SECURITY FEATURES The Security menu allows you to set up the data security features of your notebook to fit your operating needs and to view the current data security configuration Follow the instructions for Navigating Through the Setup Utility to make any changes The following tables show the names of the menu fields for the Security menu and its submenus all the options for each field the default settings and a description of the field s function and any special information needed to help understand the field s use The default condition is no passwords required and no write protection If you set a password write it down and keep it in a safe place If you forget the password you will have to contact your support representative to regain access to your secured functions and data e If you make an error when re entering the password a Warning will be displayed on the screen To try again press the Enter key and then retype the password Press the Esc key to abort the password setting process Entering a password incorrectly three times in a row will cause the keyboard and mouse to be locked out and the warning System Disabled to be displayed If this happens restart the computer by turning off and on the power with the power switch and use the correct password on reboot If the Password on Resume is Enabled and the Password on Boot is Disabled you will not have to type y
13. ar for each field the default settings and a description of he ia icon on your Windows Control anel xBIOS lt Advanced Security Boot Info Item Specific Help System Time 14 57 01 System Date 06 22 2004 Adjust calend lock gt Primary Master IC25N040ATMR04 0 PM UE eats Pe gt Secondary Master UJDA755 DVD CDRW SM lt Tab gt lt Shift Tab gt or f lt Enter gt selects field Language English US Figure 1 Main Menu Menu Field Options Default Description System Time Sets and displays the current time Time is in a 24 hour format of hours minutes seconds with 2 digits for each HH MM SS Example 16 45 57 You may change each segment of the time separately Move between the segments with the Tab key and or Shift Tab keys System Date Sets and displays the current date Date is in a month day year numeric format with 2 digits each for month and day and 4 digits for year MM DD YYYY for example 03 20 1998 You may change each segment of the date separately Move between the segments with the Tab key and or Shift Tab keys ree P7000 Notebook BIOS Menu Field Options Default Description Primary Master Selects Primary Displays the type of device on this ATA ATAPI interface if there is Master submenu one Pressing the Enter key selects the Primary Master submenu allowing additional device configurati
14. ay vary Depending on the drive type information such as cylinders heads and sectors may also be displayed Item Specific Help Select ATA ATAPI drive installed here Disabled Auto Standard Disabled The BIOS auto types the drive on boot time Except Auto You enter parameters of the drive None The drive is disabled Figure 3 Secondary Master Submenu Table 3 Fields Options and Defaults for the Secondary Master Submenu of the Main Menu between 1 and 16 Menu Field Options Default Description Type e Auto Auto Selects the ATA ATAPI device type Select Auto to have the type e None automatically identified by the BIOS at POST If None is e Hard Disk selected all of the following Set up items do not appear If Hard e CD ROM Disk is selected you must specify the number of Cylinders Heads and Sectors for the drive Select CD ROM to select parameters for CD ROM drive Cylinders e A number This item appears only when the type is identified as Hard Disk PE When Hard Disk is selected you can change the value This field an r is changed by incrementing pressing the Spacebar or by typ ing in the number Heads e A number This item appears only when the type is identified as Auto or Hard Disk When Hard Disk is selected you can change the value This field is changed by incrementing pressing the Spacebar or by typing in the number ree P7000 Notebook B
15. boot from removable media is not restricted Flash Write e Disabled e Enabled Enabled When disabled the BIOS Flash Memory is write protected when enabled it is not Hard Disk Security Configures hard disk security features Owner Information Sets Owner information Exiting from the Security Menu When you have finished setting the parameters on the Security Menu you can either exit from setup utility or move to another menu If you wish to exit from setup utility press the Esc key to go to the Exit Menu If you wish to move to another menu use the cursor keys 19 ree P7000 Notebook BIOS Hard Disk Security Submenu of the Security Menu The Hard Disk Security submenu is for configuring hard disk security features Hard Disk Security Item Specific Help Primary Master Password Is Clear Set Primary Master Password Enter Password Entry on Boot Enabled Figure 13 Hard Disk Security Submenu Table 13 Fields Options and Defaults for the Hard Disk Security Submenu of the Security Menu on Boot Menu Field Default Description Primary Master Clear A display only field Set is displayed when the Master Password is set and Clear when Password Is it is not Set Primary Enter Sets changes or cancels Primary Master Password The Primary Master Password Master may be up to seven characters long and include only letters or numbers no symbols
16. cO FUJITSU Fujitsu LifeBook P Series BIOS Guide LifeBook P Series Model P7010 P7010D Document Date 6 25 2004 Document Part Number FPC58 1149 01 FUJITSU COMPUTER SYSTEMS CORPORATION ree P7000 Notebook BIOS LifeBook P Series Notebook BIOS BIOS SETUP UTILITY The BIOS Setup Utility is a program that sets up the operating environment for your notebook Your BIOS is set at the factory for normal operating conditions therefore there is no need to set or change the BIOS environment to operate your notebook The BIOS Setup Utility configures Device control feature parameters such as changing T O addresses and boot devices e System Data Security feature parameters such as passwords Entering the BIOS Setup Utility To enter the BIOS Setup Utility do the following 1 Turn on or restart your notebook 2 Press the F2 key once the Fujitsu logo appears on the screen This will open the main menu of the BIOS Setup Utility with the current settings displayed 3 Press the arrow keys to scroll through the other setup menus to review or alter the current settings Navigating through the Setup Utility The BIOS setup utility consists of six menus Main Advanced Security Boot Info and Exit This document explains each menu and all submenus and setup items The following procedures allow you to navigate the setup utility menus 1 To select a menu use the cursor keys lt 2 To select a
17. et When Normal is selected the memory and video clock are set at the maximum When Power Save is selected the memory and video clock are set lower result ing in power savings 16 Advanced Menu Event Logging Submenu of the Advanced Menu The Event Logging submenu is for setting up the logs for DMI event logging Advanced an eae cain Event Log Capacity Event Log Validity View Event Log Event Logging System Boot Event Clear All Event Logs Mark Events as Read Space Available Valid EE Press lt Enter gt key to view the contents of the event log Enabled Disabled No Enter Figure 11 Event Logging Submenu Table 11 Fields Options and Defaults for the Event Logging Submenu of the Advanced Menu Menu Field Options Default Description Event Log Capacity Space Display only Available Event Log Validity Valid Display only View Event Log e Enter Enter Allows you to view content of event log Event Logging e Disabled Enabled Turns event logging on and off for all DMI events e Enabled System Boot Event e Disabled Disabled Turns event logging on and off for DMI system boot events e Enabled Clear All Event Logs e No No When set to Yes all event logs will be cleared at next boot e Yes Mark Events as Read e Enter Enter Allows you to mark events currently in the event log as read 17 roe P7000 Notebook BIO
18. he type None automatically identified by the BIOS at POST If None is selected all CD ROM of the following Set up items do not appear Select CD ROM if a Hard Disk CD ROM drive is installed at this connection If Hard Disk is selected you must specify the number of Cylinders Heads and Sectors for the drive LBA Format Logical Block Addressing LBA Total The total number of sectors on your hard disk Sectors Maximum The maximum capacity of your hard disk Capacity roe P7000 Notebook BIOS Table 2 Fields Options and Defaults for the Primary Master Submenu of the Main Menu Menu Field Options Default Description CHS Format Cylinders Heads Sectors Cylinders A number This item is active only when Hard Disk is selected as the type This between 0 and field is changed by incrementing pressing the Spacebar by typ 03 233 ing in the number or using the and keys Heads A number This item is active only when Hard Disk is selected as type You can between 1 and change the value by incrementing pressing the Spacebar by typ 16 ing in the number or using the and keys Sectors A number This item is active only when Hard Disk is selected as type You can between 0 and change the value by incrementing pressing the Spacebar by typ 63 ing in the number or using the and keys Maximum Display only Di
19. hen press the or key to change the order number for that source Be sure to save your changed order when you exit the BIOS CD ROM Drive setup utility Exiting from Boot Menu When you have finished setting the boot parameters with the Boot menu you can either exit from the setup utility or move to another menu If you wish to exit from the setup utility press the Esc key to go to the Exit menu If you wish to move to another menu use the cursor keys 23 roe P7000 Notebook BIOS INFO MENU DISPLAYS BASIC SYSTEM INFORMATION The Info menu is a display only screen that provides the configuration information for your notebook The information displayed on this screen is variable according to the unit you purchased The following table shows the names of the menu fields for the Info menu and the information displayed in those fields These fields are for information purposes only and are not editable Item Specific Help BIOS Version 1 05 BIOS Date 05 10 2004 BIOS Area E000h FFFFh CPU Type ULV Intel R Pentium R M CPU Speed 1 10 GHz L1 Cache 64 KB L2 Cache 1024 KB Total Memory 512 MB Memory Slot 1 512 MB DDR SDRAM Memory Slot 2 None Figure 17 Info Menu Table 17 Fields Options and Defaults for None Menu Field Default Menu Field Default BIOS Version 1 xx L1 Cache 64 KB BIOS Date mm dd yyyy L2 Cache 1024 KB BIOS Area EOOOh FFFFh Total
20. ields Options and Defaults for the CPU Features Submenu of the Advanced Menu Menu Field Options Default Description SpeedStep R Disabled Enabled Enables or disables SpeedStep R Technology Technology Enabled On Battery Maximum Battery Opti Allows the user to select the power conditions Performance mized when the system is running on battery power Battery Optimized Automatic On AC Maximum Maximum Allows the user to select the power conditions Performance Performance when the system is running on AC power Battery Optimized Automatic 14 USB Features Submenu of the Advanced Menu Advanced Menu The USB Features submenu configures the USB capabilities of the system Advanced USB Features Item Specific Help Legacy USB Support SCSI SubClass Support Enabled Disabled The feature is disabled Enabled Legacy USB Emulation is enabled and USB devices are available without USB aware OS Figure 9 USB Features Submenu Table 9 Fields Options and Defaults for the USB Features Submenu of the Advanced Menu Menu Field Options Default Description Legacy USB Disabled Enabled When Disabled is selected legacy USB emulation is dis Support Enabled abled When Enabled is selected legacy USB emulation is enabled and USB devices are available without USB aware Os SCSI SubClass Disabled Enabled When Enabled is selected US
21. on options for this interface Secondary Selects Displays the type of device on this ATA ATAPI interface if there is Master Secondary one Pressing the Enter key selects the Secondary Master submenu Master submenu allowing additional device configuration options for this interface Language e English US English The default setting differs between the US European and the Japa e Japanese JP US nese model Selects the display language for the BIOS Primary Master Submenu of the Main Menu Note Actual hard drive label shown may vary Depending The Primary Master submenu identifies which ATA devices are installed on the drive type information such as cylinders heads and sectors may also be displayed Primary Master FUJITSU MHT2040AT PM Item Specific Help Type Total Sectors Maximum Capacity Auto Select ATA ATAPI drive LBA Format installed here Multi Sector Transfers LBA Mode Control Transfer Mode Ultra DMA Mode 78140160 40008MB Auto The BIOS auto types the 16 Sectors drive on boot time Enabled Multiword DMA 2 Except Auto Disabled You enter parameters of the drive None The drive is disabled Figure 2 Primary Master Submenu Table 2 Fields Options and Defaults for the Primary Master Submenu of the Main Menu Menu Field Options Default Description Type a Auto Auto Selects the ATA ATAPI device type Select Auto to have t
22. our password upon resuming the system from the Suspend or Save to Disk modes Power Management Security will work only if Password on Boot is enabled Main Advanced Boot Supervisor Password Is Clear User Password Is Clear Set Supervisor Password Enter Set User Password Enter Minimum User Password Length 0 Password on Boot Disabled On Automatic Wake up Disabled KB Lock on Resume Disabled Boot from Removable Media All Flash Write Enabled Puard Disk Security Powner Information Figure 12 Security Menu 18 Item Specific Help Press lt Enter gt key to set Supervisor Password to enable any password features Then password entry is required to enter BIOS Setup Table 12 Fields Options and Defaults for the Security Menu Menu Field Options Default Description Supervisor Password is User Password is Clear Clear A display only field Set is displayed when the system supervisor password is set and Clear when it is not A display only field Set is displayed when the general user pass word is set and Clear when it is not Set Supervisor Password Enter Sets changes or cancels the Supervisor Password The Supervi sor Password may be up to seven characters long and must include only letters or numbers no symbols Passwords are NOT case sensitive To cancel a password press the Enter key instead of entering characters in the Enter New Password field
23. oving data to from the drive Autotype Mode e Mode 0 the drive to select the optimum transfer mode This option can e Mode 1 not be changed when Auto is selected e Mode 2 e Mode 3 e Mode 4 e Mode 5 Exiting from Main Menu When you have finished setting the parameters on this menu you can either exit from the setup utility or move to another menu If you wish to exit from the setup utility press the Esc key or use the cursor keys to go to the Exit menu If you wish to move to another menu use the cursor keys Advanced Menu ADVANCED MENU SETTING DEVICE FEATURE CONTROLS The Advanced Menu allows you to Follow the instructions for Navigating Through the Select between the display panel and an external CRT Setup Utility to make any changes display The following tables show the names of the menu fields Enable or disable compensation for your display for the Advanced Menu and its submenus all of the Configure CPU and USB features options for each field the default settings and a descrip Configure Miscellaneous features tion of the field s function and any special information needed to help understand the field s use Advanced Security Boot Info Exit Item Specific Help gt Keyboard Mouse Features gt Video Features gt Internal Device Configurations Configures keyboard gt CPU Features mouse features gt USB Features gt Miscellaneous Configurations gt Event Logging Figure 4
24. splays the maximum capacity of the drive calculated from the Capacity parameters of the hard disk when Auto is selected and the type is identified as hard disk Multi Sec a Disabled 16 Sec This option cannot be changed when Auto is selected Specify the tor 2 Sectors tors number of sectors per block for multiple sector transfer Transfers 4 Sectors 8 Sectors a 16 Sectors LBA Mode Disabled Enabled Enables or disables logical Block Addressing in place of Cylinder Control Enabled Head Sector addressing This option cannot be changed when Auto is selected Transfer a Standard Multi Selects the method for moving data to from the drive Autotype the Mode Fast PIO 1 wordDMA drive to select the optimum transfer mode This option cannot be Fast PIO 2 2 changed when Auto is selected a Fast PIO 3 Fast PIO 4 Multiword DMA 1 Multiword DMA 2 Ultra DMA Disabled Disabled Selects the method for moving data to from the drive Autotype the Mode Mode 0 drive to select the optimum transfer mode This option cannot be Mode 1 changed when Auto is selected Mode 2 Mode 3 Mode 4 Mode 5 Secondary Master Submenu of the Main Menu The Secondary Master submenu identifies which ATA devices are installed Secondary Master UJDA755 DVD CDRW SM Type Multi Sector Transfers LBA Mode Control Transfer Mode Ultra DMA Mode Disabled Note Actual drive label shown m
25. the setup utility as described in the following steps 1 When you turn on or restart the computer there is a beep and or the following message appears on the screen Error message please run SETUP program Press lt F1l gt key to continue lt F2 gt to run SETUP 2 Ifan error message is displayed on the screen and you want to continue with the boot process and start the operating system anyway press the F1 key GI 3 Ifan error message is displayed on the screen and you want to enter the setup utility press the F2 key If your settings require it you may be asked for a password before the operating system will be loaded 4 When the setup utility starts with a fault present the system displays the following message Warning Error message Continue 5 Press any key to enter the setup utility The system will then display the Main Menu with current parameters values MAIN MENU SETTING STANDARD SYSTEM PARAMETERS The Main Menu allows you to set or view the current the field s function and any special information needed system parameters Follow the instructions for to help understand the field s use Navigating through the Setup Utility to make any changes System Time and System Date can also be The following tables show the names of the menu fields set from your operating system without for the Main menu and its submenus all of the options using the setup utility Use the calend
26. ve unless the Supervisor s Password has e Enabled been set When disabled access to the Boot Menu with the F12 key is disabled When enabled the Boot Menu is enabled and the F12 key will allow you to display it Preboot Execution e Disabled Disabled Turns off and on the preboot execution environment Environment e Enabled feature Boot Device Priority Selects Boot Device Priority submenu This menu allows setting up the source for the operating system 22 Boot Device Priority Submenu of the Boot Menu The Boot Device Priority submenu is for setting the order of checking of sources for the operating system Boot Device Priority Item Specific Help Keys used to view or Floppy Disk Drive configure devices Hard Disk Drive CD ROM Drive lt Enter gt expands or collapses devices with a or lt Ctrl Enter gt expands all lt Shift 1 gt enables or disables a device lt gt lt Space gt or lt gt moves the device up or down lt d gt removes a device that is not installed Figure 16 Boot Device Priority Submenu Table 16 Fields Options and Defaults for the Boot Device Priority Submenu of the Boot Menu Menu Field Description Floppy Disk Drive The boot selections determine the order in which the BIOS searches for the operating system during a startup sequence To change the order highlight one source by using Hard Disk Drive the up or down cursor keys and t
Download Pdf Manuals
Related Search