Fujitsu FS-1004EX User's Manual
Contents
1. 2 Connect the PC s to the second level in the same way as for when using one level Connect e Next use the dedicated PS 2 cables to connect the PC ports of the first level to the keyboard mouse monitor connector of the second level Connect f After connecting make sure to fix each connector MiniD SUB15P in place with a fixing screw To increase the number of slaves connect them in the same way as described in steps 1 to 3 above Do not connect slaves beyond the second level Three level connection cannot be done After the connections to PC s have been completed connect the keyboard mouse monitor to the master side Connect g After confirming that the connections have been done correctly connect the dedicated AC adapter to the master side to supply power to the device Connect h If the SELECT LED device lights up press the RESET switch once for the monitor setting data to be saved The setting data will be saved at both the master and slave sides For details refer to Monitor Setting on page 9 After the setting has been done start each PC The monitor setting data is now effective Once the monitor setting data has been saved it is always effective even when you start the PC s at the same time Select each PC and check if the keyboard mouse monitor works properly If not refer to Troubleshooting on page 12 for necessary procedures Second level Slave First level2. O PC Connection Diagram 2 Levels 7 Operation Selecting PC There are two ways to select a PC the select switch and the Hot Key Mode Also when the power to the selected PC is turned off the status is preserved Switch to the PC you want to select using the select switch or the Hot Key Mode 1 PC Selection using the Select Switch Press the select switch number of the PC you want to select and switch PC s Then the SELECT LED above the selected number lights up With cascaded connections a PC can be selected directly by pressing the select switch number of the slave side and you don t have to switch to each PC in order from the master side When using the select switch operation the Hot Key Mode is released 2 PC Selection by Keyboard called Hot Key Mode Switch the PC s by the following procedures Switching cannot be done by pressing the Select Key directly Also note that the keyboard mouse of the PC cannot be used in the Hot Key Mode Hot Key Mode gt Switch by Select Key gt End Key enables PC operation 1 Hot Key Mode At the time of purchase the following three kinds of Hot Keys can be used Also enable disable can be set Refer to Enabling Disabling Hot Key and set the status as necessary Press lt Ctrl gt lt Alt gt and lt Shift gt keys together Press lt Ctrl gt key twice Press it quickly within 300ms in succession Press lt Scroll Lock gt key twice Press it quickly withi
3. contact our service department 4 Weare not responsible for any effects this product may have on other products 5 If this product is used in any goods or technology intended for export that come under the authority of the Foreign Exchange and Foreign Trade Control Law then it is necessary to get the related permission for export Therefore be sure to apply for the export permission to the government of Japan before taking this product out of the country 6 This product was not designed for purposes requiring high standards of reliability such as medical equipment for life support marine transponders or equipment for aerospace and controlling nuclear power If the switch device is used with any of the above equipment facilities or control systems we are not responsible for injuries fires or other social damage that may be caused in the event of device failure 7 Do not disassemble modify or repair this product maintenance should only be carried out by Fujitsu authorised engineers Violation of this may lead to unpredicted problems 8 This product uses metallic and plastic components Follow the regulations in force in your community when disposing this product 9 All company names and product names referred to in this document are registered trademarks of their respective owners 1 Introduction Thank you for purchasing SERVIS EX from here on the device or the switch device This computer switching device KVM switc
4. is done the Hot Key can be used Change the status when necessary Other Hot Keys can be enabled in the same way lt Example gt While pressing the select switch 1 press lt Ctrl gt lt Alt gt lt Shift gt 3 Initializing the Hot Keys While pressing the select switches 1 and 3 press the reset button The SELECT LED blinks and all Hot Keys are enabled 5 Monitor Setting Saves the monitor setting data VESA DDC2 EDID to all ports At the PC s boot up the monitor s PnP function will be enabled 1 Connect the monitor and set its power ON 2 While this device s power is ON while the power of one or more PC s is ON or while the AC adapter is connected press the reset switch 3 The SELECT LED blinks and the setting data VESA DDC2 EDID is saved to all ports At the same time all LED s Num Lock Caps Lock and Scroll Lock on the keyboard blink While blinking no normal keyboard or mouse input is accepted 4 After completion the SELECT LED stays on And the LED s on the keyboard return to normal 5 Pressing the lt E gt key in Hot Key Mode performs the same process 6 With cascaded connections pressing the RESET switch on the master side saves the data to the slave side at the same time No need to press the RESET button on the slave side 7 The setting data is retained even when all the PC s are turned OFF and will be enabled at PC boot up When the monitor is changed reset following the above
5. procedure and restart the PC The PnP function needs to be supported by the monitor and the PC It does not work in a non supported device 11 Notes for Cascaded Connections When creating cascaded connections with a previous model device FS 104 or FS 108 make sure to set this device as a master When creating cascaded connections with Fujitsu advanced model FS 1004 FS 1008 or FS 1016 connect FS 1004EX at the slave side The OSD function will be effective Use 1 8m dedicated PS 2 cables Also there are function limitations as stated below lt Example of cascaded connection gt Slaves FS 104AT or FS 108AT or FS 104AT or FS 108AT or FS 1004EX FS 1004EX FS 1004EX FS 1004EX Master FS 1004EX l 1 Function Limitation When the slave side is FS 104 or FS 108 A Switching cannot be done directly by pressing the SELECT key of the slave side First with the SELECT key of the master side switch to the port connected to the slave side ive The monitor setting data cannot be saved in the slave side To use the PnP function of the monitor boot with the PC already selected If not disable the automatic PnP recognition from the PC 12 9 Specifications With Cascaded Connections Max 16 LED Display POWER Green SELECT Green Orange Interfaces Keyboard PS 2 Keyboard Interface OADG compliant Mouse PS 2 Mouse Interface OADG compliant Console Keyboard PS 2 Mini DIN 6P Female x 1 Purple Ports Mouse
6. PS 2 Mini DIN 6P Female x 1 Green Monitor Mini D SUB 15P Female x 1 Blue PC Ports Mini D SUB 15P Female x 4 Black Hot Keys Three possible selections Ctrl Alt Shift together Ctrl x 2 Scroll Lock x 2 Auto Scan Intervals 3 5 10 default 20 40 60 seconds Monitor Resolution Refresh Rate 1600 x 1200 Max 75Hz Monitor Plug amp Play Function DDC2 EDID Compatible Voltage Current DC5V 0 2A DC Current Supply to Keyboard Mouse Max 150mA 1 5A With AC Adapter Operating Environment 0 40 C 10 80 RH Painted Black Metal Case 195 W x 104 D x 40 H mm 0 7kg 10 Optional Accessories Product ID Remark Dedicated PS 2 Cable 1 8m NC14000 B602 Also for cascade connections Dedicated PS 2 Cable 3m NC14000 B603 Dedicated PS 2 Cable 5m NC14000 B605 Dedicated Rack Mount Panel NC14003 T032 Dedicated AC Adapter NC14003 T055 13 11 Troubleshooting The LOW POWER Cascaded connections are done Connect the dedicated AC Lack of power supply Connect the dedicated AC ee eee The keyboard and The keyboard and mouse connections Match the port No s operate or operate Hot Key Mode is not released Press the Enter or ESC key strangely Not connected properly Connect properly Connection cable is defective Confirm the connector connection Replace with a new cable A non supported keyboard or mouse is Replace with a supported connected keyboard or mouse The scroll function or button do
7. Rear Panel f f Connectors for PC Ports 1 through 4 Connect each port 1 through 4 on this device to the PC s keyboard mouse monitor connector with the dedicated cable g Keyboard Connector Keyboard Icon Connect a PS 2 keyboard here h Mouse Connector Mouse Icon Connect the PS 2 mouse here i Monitor Connector Monitor Icon Connect the monitor here j AC Adapter Connector When the LOW POWER LED of the device lights up connect the dedicated AC adapter here Also connect to the master side of a cascaded connection Do not use any AC adapters other than the dedicated ones Doing so may cause damage to the device 6 Setup 1 Getting Started Make sure to confirm that the power cable for each PC is plugged into an electric outlet and that the power is OFF If the device is connected while the power of the PC is ON the PC and or this device may not function and may be damaged as well Confirm connection a and OFF 2 A Using one switching device When using one level It is possible to hook up a maximum of 4 PC s See the diagram below Connect the first PC s keyboard mouse monitor connector with each connector color coded of the dedicated cable Connect b Next connect the switching device 1 s connector MiniD SUB15P female for the PC port to the connector black of the dedicated cable Connect c After connecting make su
8. SERVIS EX Server Intelligent Switch For PC Server FS 1004EX User s Manual Table of Contents Tes MtrOGUCtlOMN e rar aar tecctecccetectet seetenevtenceeestedetesvietieders 3 2 UNPACKING iiciicecic ese etscctetecceel See cecetece teat ae eteceten eee teeeeetiieets 3 3 Safety INStructions ccceeesececeeeeeeeeeeeeeeeeeeeeeeeneeeseeeees 4 A Characteristics s aranana aeaa apaa aii 5 5 Component Names and Their Functions 6 Coa AN ao a I Ae coerce cceeie cee EE acces conte cteiuave ce cael cug sels sau hanguecteusy cued 6 9 2 gt Rear Panmel E E caceteaeded heae 7 E o eine aie cat Annan nna teas 8 7 Operation Selecting PC 2 ccccseessseeeeeeeeeeeeeeeeees 10 8 Notes for Cascaded Connections 2 ceeeeeeee 12 9 Specification sic cccceczeecescectedeesseeeceeececteeseeeeeeteceeceteteseteeee 13 10 Optional Accessories 22 ccceceeeeeeeeeeeeeeeeeeeeeeeeenenees 13 11 TroubleShooting ccc ce eee ee eeeeeeeeeeeeeeeeeeneeeneennees 14 FUJITSU COMPONENT LIMITED 030619 CAUTION 1 This product and related documents are the copyright of Fujitsu Component Ltd Any unauthorized reprinting copying republishing or modification of this product or document is prohibited by law 2 The details of this product and document are subject to revision without notice 3 If any parts of this product or manual are found to be unclear or incorrect please
9. VM switch connections are not connected recognized A problem has occurred at the switch Press the reset switch 14 Note cO FUJITSU NC14004 L530_01 This manual is made of recycled paper
10. d 1 During the Hot Key Mode press the number lt 0 gt key for automatic switching The SELECT LED changes from a quick blink to a slow blink 2 The switching interval can be adjusted by pressing the lt f gt cursor key to make it shorter or the lt gt cursor key to make it longer Allowed Auto Scan Intervals are 3 5 10 default 20 40 and 60 seconds 3 4 PC s that are powered OFF will not be switched and will be skipped 5 No normal keyboard or mouse input is accepted while the Auto Scan Mode is running 6 To cancel the Hot Key Mode press the End key 4 Enabling or Disabling the Hot Keys The Hot Keys can be enabled or disabled by setting Set the status as necessary At the time of purchase all Hot Keys are enabled The setting is retained when the power is turned off 1 Disabling the Hot Keys While pressing the select switch 2 press the Hot Key you want to disable Do not release the select switch before pressing the Hot Key or the setting will not be done Once the setting is done the Hot Key cannot be used Change the status when necessary Other Hot Keys can be disabled in the same way lt Example gt While pressing the select switch 2 press lt Ctrl gt lt Alt gt lt Shift gt 2 Enabling the Hot Keys While pressing the select switch 1 press the Hot Key you want to enable Do not release the select switch before pressing the Hot Key or the setting will not be done Once the setting
11. ditional device s and connection cable s dedicated AC adapter s sold separately are necessary depending on the number of PC s A cascaded connection can be used with FS 1000 series so your assets can be utilized effectively When this device is used as a master some functions will be limited for example the OSD display is disabled Switching can be done simply with the select button or keyboard In addition for keyboard switching there are three kinds of Hot Keys to ensure flexibility The three Hot Keys are Ctrl Alt Shift Ctrl x 2 and Scroll Lock x 2 All ports can be used for Plug n Play PnP monitors The setting data VESA DDC2 EDID of the monitor can be saved in all ports therefore the PnP function of the monitor will become effective at simultaneous PC boot up The PnP function needs to be supported by the monitor and the PC PS 2 mice are supported PS 2 keyboards such as Microsoft and Logicool are supported The following PS 2 mice are supported 2 3 button mice all types of wheel mice Microsoft IntelliMouse Microsoft IntelliMouse Explorer Logitech Logicool MouseMan Wheel etc and Fujitsu FID677 Multi scroll mouse Special kinds of mice which need dedicated drivers are not supported PS 2 keyboards are supported Special kinds of keyboards which need dedicated drivers are not supported Auto Scan mode is installed for automatic switching which is useful for PC monitoring Also the switching i
12. e warranty Only PC s equipped with the following type of keyboard mouse and monitor connectors can be hooked up to this device Other specifications are not supported Keyboard connector Mini DIN 6P female PS 2 x 1 Mouse connector Mini DIN 6P female PS 2 x 1 Monitor connector Mini D SUB 15P female VGA x 1 Connecting the PC requires optional dedicated cables PS 2 There are two options 3m and 5m Use a 1 8m dedicated PS 2 cable for cascaded connections Cables longer than that are not covered by the warranty Special kinds of keyboards mice including programmable wireless or those that require a specific driver which are not supported will not operate Use appropriate equipment The keyboard mouse connector for this switch device is exclusively for PS 2 Mini DIN 6P female Serial mouse or USB type keyboard mouse connection is not possible Depending on the type of mouse multi functional mouse with wheel etc or support software the device may not operate normally The keyboard mouse connectors are the same shape Check the colors and the orientation to connect them correctly If they are forced in or connected incorrectly the switch device may not function and may be damaged as well Set up the keyboard mouse and monitor on each PC correctly If they are not set correctly they will not operate normally ADVI Digital Video Interface compatible display cannot be connected The display on t
13. es not The specific mouse driver is not Install the specific mouse driver operate installed monitor does not environment function Refer to Monitor Settings and set correctl connector Poor screen display Connection cable is defective Confirm the connection Faded images Replace with a new cable blurred characters etc does not display monitor settings when switching Unsupported monitor or cannot Replace with a supported monitor synchronize multisync Adjust the monitor Cannot go into Hot Hot Key is disabled Initialize the Hot Keys Key Mode press correctly Auto Scan Mode Hot Key Mode is not on Refer to Hot Key Mode and cannot be set press correctly Switching cannot be Hot Key Mode is not on Refer to Hot Key Mode and Wrong key Refer to SELECT Key and press correctly The auto scan The switch cycle has not been set Refer to Auto Scan Mode and switch cycle is correctly set correctly abnormal The default value is 10 seconds Operation stops after Connection has been disrupted Check the connections and restart a period of normal The switch is hung up Press the reset switch operation A problem has occurred at the PC Correct the problem at the PC The LED on the The PC s keyboard port s power circuit Correct the problem at the PC device does not light protection element has failed even after turning on the host Cascaded Non Fujitsu switching device is Cascade with Fujitsu K
14. h is PC AT from here on PC compatible Using just one monitor keyboard and mouse this device allows you to operate several PC s PC s can be switched simply with the select switch or keyboard Safety instructions are provided to ensure the safe use of the switch device Also be sure to thoroughly read this User s Manual before you start using the switch device to ensure correct use Be sure to keep this User s Manual in a safe place for future reference Note Generally this computer switching device is also called the KVM switch Keyboard Video Mouse switch 2 Unpacking Be sure to verify that the following items are included in the package when unpacking If any item is missing or damaged immediately contact the place of purchase or our service department E SERVIS EX 1 unit m User s Manual 1 manual Safety Instructions A Read the Safety Instructions before use to ensure proper use of this product Safety Instructions contained in this section are written for the user in order to avoid any damage to property or injury to users please read the following carefully Make sure that the power of the PC is OFF before connecting or disconnecting any of the connectors Also be sure to discharge any static electricity Connecting or disconnecting the connectors while carrying a static charge or while the power of the PC is ON may damage the PC or this device Please note that damage of this kind is not covered by th
15. he monitor connected to this device supports multi scan therefore check that it is also working correctly when connected directly to PC The resolution that this device supports is 1600 x 1200 with a refresh rate up to 75 Hz Also the display may be off center after switching due to monitor and resolution settings Set the monitor or video card if necessary Depending on the combination of monitor and video card the screen display may show some degradation in quality ghosts or blurring etc or abnormality This may be due to the monitor cable the monitor or the video card so try changing the monitor or the video card The monitor cable connector is Mini D SUB 15P Make sure you connect it in the correct orientation and use the fixing screw to fix it in place If it is not connected properly it may cause trouble Cascading can only be performed with Fujitsu KVM switches only You cannot cascade with switches produced by other manufacturers The maximum number of levels of cascaded connections is two More than two levels cannot be connected Also for a cascaded connection make sure to connect a dedicated AC adapter to the master side 4 Characteristics 4 PC s can be operated with only one keyboard monitor mouse A lot of space can be saved Switching is always stable even at simultaneous PC boot up 5 or more PC s can be connected by using a cascaded connection A maximum of 16 PC s can be connected In this case ad
16. n 300ms in succession In the Hot Key Mode with or without cascaded connections the SELECT LED on the master side changes from being lit to blinking rapidly and the Scroll Lock LED on the keyboard blinks as well Although the lighted LED s Num Lock Caps Lock and Scroll Lock on the keyboard will be turned off the previous setting status will return once Hot Key Mode is terminated The SELECT LED s on the slave side remain lit and do not blink 2 Select Key A Selection by the numeric keys Select by the numeric keys 1 to 4 In this way a PC with its power off can also be selected With cascaded connections select PC s on the master side by number keys 1 to 4 and select those on the slave side by the function keys F1 to F4 PC s on the slave side can also be selected in the following ways Slave selection lt F 1 gt immediate selection or lt F gt and then lt 1 gt in order within 1 sec key Slave 4 selection lt F4 gt immediate selection or lt F gt and then lt 4 gt in order within 1 sec key B Selection by the cursor keys With the cursor keys lt gt lt gt selections can be done in order In this way a PC with its power off cannot be selected 3 End Key A lt Enter gt key Ends the Hot Key Mode and the selected PC can be operated B lt Esc gt key Ends the Hot Key Mode and the previous PC before selection can be operated 10 3 Auto Scan Mode Switch automatically after a certain perio
17. nterval can be set six levels from 3 to 60 seconds For single use an AC adapter is not necessary because the device can be activated with the keyboard power of the PC If the power capacity of the PC is not enough a separate AC adapter can be used available separately For a cascaded connection one AC adapter is necessary at the master side With an optional rack mount panel 2 devices can be stored in 19 inch 1U space This device can be connected to all PC AT compatibles where PS 2 keyboard mouse for PC AT can be used Note that special kinds of OS s or keyboards mice are not supported 5 Component Names and Their Functions 5 1 Front a LOW POWER POWER FUJITSU ne SVS EX a POWER LED Lights up when the PC is ON b SELECT Switch Press this switch to select the PC You can select a PC even if its POWER LED is not lit c SELECT LED Lights up when the PC is selected It blinks when in the Hot Key mode or being reset d RESET Switch Use this switch when PC selection is not possible when the keyboard or mouse cannot be operated or when the monitor setting data also needs to be saved The SELECT LED s blink and PCs can be restored without being rebooted Press it lightly with a metal pin or something e LOW POWER LED Lights up when the device cannot operate normally due to low power voltage inside the device When this light is on make sure to connect a dedicated AC adapter 5 2
18. re to fix each connector MiniD SUB15P in place with a fixing screw Connect PC s 2 through 4 in the same manner After the connections to PC s have been completed connect the keyboard mouse monitor to the device Connect d After confirming that the connections have been done correctly start the first PC only After the PC s start up press the RESET switch once for the monitor setting data to be saved For details refer to Monitor Settings on page 9 After the setting has been done re start the first PC The monitor setting data is now effective Then start other PC s in order Once the monitor setting data has been saved it is always effective even when you start the PC s at the same time 10 Select each PC and check if the keyboard mouse monitor works properly If not refer to Troubleshooting on page 12 for necessary procedures a 3 E PC Connection Diagram 1 Level 3 B Using multiple switching devices Cascaded connections When using two levels Cascaded connection means to connect more than one switching device With cascaded connections the first level is the master side and the second level is the slave side By using cascaded connections it is possible to hook up a maximum of 16 PC s 1 master and 4 slaves See the diagram below 1
Download Pdf Manuals
Related Search