Fujitsu FMWSP9 User's Manual
Contents
1. Figure 3 Installing the Screen Protector Remove the protective film from the top of the screen protector as shown in Figure 4 2 Peel the protective film from the adhesive side of the screen protector as shown in Figure 2 Figure 4 Removing the Protective Film Wipe the exposed surface of the screen protector with a clean dry cloth to remove any adhesive left i behind by the protective film Figure 2 Peeling Protective Film PenCentra 130 is a trademark of Fujitsu Personal Systems Inc 1999 Fujitsu Personal Systems Inc 9 99 58 0674 00B2. FMWSP9 Screen Protector Installation Instructions PenCentra 130 The FMWSP 9 screen protector can be installed on the PenCentra 130 pen tablet display screen or on the display window of the FAWCC36 harsh environment case Note the following 1 Before installing a new screen protector remove any screen protector that is already installed A notch in the corner of the screen protector allows you to slide your fingernail or a firm pliable implement such as a credit card under the screen protector for removal Do not use a metal implement it could scratch the screen To ensure good adhesion clean the display screen with a soft cotton cloth dampened with denatured alcohol before installing the screen protector When the alcohol dries it may leave streaks on the screen If streaking occurs buff the screen gently with a clean dry cloth to remove the streaks The step is for installation on the harsh environment case HEC only Remove edge from screen protector as shown in Figure 1 A Figure 1 Removing Edge for HEC Installation oe FUJITSU Install the screen protector on the pen tablet or harsh environment case Apply the adhesive side to the screen with the notch in the lower left corner as shown in Figure 3 Apply pressure along the edges of the screen protector with your finger Avoid lifting the screen protector from the screen after it is installed The adhesive requires 48 hours to cure properly
Download Pdf Manuals
Related Search