Fujitsu Siemens Computers 5011D User's Manual
Contents
1. Figure 8 Loading Ejecting Media Tablet Dock User s Guide Dock User s Guide REMOVING THE DRIVE To remove the media drive from your Tablet Dock 1 Ifthe Tablet PC and media drive are running click on the Safely Remove Hardware icon in the system tray at the bottom right of your screen and disable the media drive It is recommended that you always have the media drive installed while you are using your Tablet PC in the Tablet Dock iJ 2 Pull the drive latch away from the Tablet Dock to unlatch the drive from the dock See Figure 9 Figure 9 Removing the Media Drive 3 Pull the module out of the Tablet Dock SAFETY PRECAUTIONS Never move the Tablet Dock with the system docked unless it is fully locked If the system were to undock accidentally it could drop and be damaged Never power off or remove the computer from the Tablet Dock while the system is reading or writing to a floppy or hard drive This could result in data loss FUJITSU CONTACT INFORMATION If you have problems you are unable to resolve consult your support representative toll free at Phone 1 800 8Fujitsu 1 800 838 5487 FAX 408 764 2724 E mail 8fujitsu us fujitsu com Web Site us fujitsu com computers Before you place the call have the following information ready so the customer support representative can provide you with the fastest possible assistance Product name and model number for b2. For technical support call 1 800 8fujitsu 1 800 838 5487 or e mail us at 8fujitsu us fujitsu com Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited and Stylistic is a registered trademark of Fujitsu Computer Systems Corporation Microsoft and Windows are either registered trademarks or trademarks of the Microsoft Corporation in the United States and or other countries All other trademarks mentioned herein are the property of their respective owners Product description data reflects Fujitsu design objectives and is provided for comparative purposes actual results may vary based on a variety of factors Specifications are subject to change without notice 2004 Fujitsu Computer Systems Corporation All rights reserved B6FY 0011 02EN 00
3. User s Guide PRIOR TO DOCKING YOUR SYSTEM The Tablet Dock is designed to accommodate a tablet with either a standard battery pack or a larger high capacity battery pack When a high capacity battery pack is installed in your tablet you must adjust the Tablet Dock platform to ensure that the connector on the back of the tablet aligns properly with the interface connector on the dock If you have a high capacity battery pack installed in your system perform the following procedure before attempting to install the system Usi 1 Figure 3 Dropping the Platform ng the dock with a high capacity battery Holding the platform ledge pull it away from the Tablet Dock reference Figure 3 2 With the ledge pulled out lower it as far as it will go 3 Press the ledge back so that it is flush with the Tablet Dock The tablet with a high capacity battery can now be docked Using the dock with a standard battery pack 1 To change the dock back to accommodate a standard battery pull the platform ledge away from the Tablet Dock Lift the platform until it stops Press the platform ledge back so that it is flush with the Tablet Dock DOCKING YOUR SYSTEM Microsoft Windows uses plug and play technology to automatically load the files necessary to operate your Tablet Dock and any attached devices The following instructions assume the i Tablet Dock is positioned in portrait mode with the Lock Hand
4. cO FUJITSU Fujitsu Stylistice ST Series Tablet PC TABLET DOCK USER S GUIDE Warning Handling the cord on this product will expose you to lead a chemical known to the State of California to cause birth defects or other reproductive harm Wash hands after handling C DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name Fujitsu Computer Systems Corporation Address 1250 E Arques Avenue M S 122 Sunnyvale CA 94085 Telephone 408 746 6000 Declares that products Tablet Dock w DVD CD RW Combo FPCPR43AP Tablet Dock w CD ROM FPCPR44AP Comply with Part 15 of the FCC Rules This device complies with Part 15 of the FCC rules Operations are subject to the following two conditions 1 This device must not be allowed to cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation Stylistic Tablet PC Tablet Dock This guide contains information on using your Tablet Always use your Tablet Dock on a solid Dock You should read this guide before using the dock even if you are familiar with other computer docking devices Your Tablet Dock may be configured in one of two ways Tablet Dock with CD ROM drive Tablet Dock with DVD CD RW Combo drive Your Fujitsu Stylistic Tablet PC Tablet Dock has the following interfaces flat level clean and dry surface Nearby should be electric power and a tel
5. e phone jack for a modem or a LAN port Save packing material in order to safely ship or store the Tablet Dock in the future Port Jack Purpose Allows you to connect a Local Area EA Network LAN device or broadband Jack I device such as a cable modem VGA Port Allows you to connect an external monitor Line Out Allows you to connect headphones or Jack external speakers DC In Allows you to connect power to the system USB Ports Allows you to connect up to three Quantity 3 Universal Serial Bus USB Revision 2 0 y devices or hubs IEEE 1394 Allows you to connect a peripheral Jack such as a digital video camera UNPACKING When removing your Tablet Dock from the packaging materials check for these items Tablet Dock AC Adapter Warranty statement User s Guide this document CD containing additional applications included with Tablet Dock with Combo Drive only Contact your dealer if you do not have all of the items Do not expose the dock to rain mois ture excessive dirt or temperatures outside the Environmental Specifica tions as it may cause fire and shock hazards High voltage is present inside the Tablet Dock Do not remove the cover under any circumstances There is a serious shock hazard Turn the unit off unplug the power cord and contact a qualified service techni cian or Fujitsu Services and Support if Liquid has been spilled on t
6. elease button on the top of the right side above the lock handle While holding it down pull the lock handle upwards to unlatch the back latches from the system See Figure 5 for location 3 Pull the system out then upwards away from the platform as shown in Figure 5 The system is now undocked Figure 5 Undocking the system CHANGING SYSTEM ORIENTATION With the Tablet Dock you have the option of viewing the display either in Portrait vertical or Landscape horizontal mode To change the position of the display simply grasp the edge of the system and turn it in the direction shown in Figures 5 and 6 If the display is in portrait position turn the display to the right as shown in Figure 6 If the display is in landscape position turn the display to the left as shown in Figure 7 Figure 6 Changing Display from Portrait to Landscape Mode Figure 7 Changing Display from Landscape to Portrait Mode Li Depending upon the configuration of your Tablet PC the display image may or may not change orientation automatically when the display is rotated To manually change the orientation of the display image use the Orientation application button See your system User s Guide for more information Tablet Dock User s Guide Dock User s Guide CONNECTING DEVICES This section contains instructions on attaching external peripherals to your Tablet Dock To A
7. he Tablet Dock The Tablet Dock has been dropped Small metal objects went inside your Tablet Dock which may cause a short circuit and or create a hazard of shock Fuses continue to blow out A distinct change in the operation and performance of the Tablet Dock occurs The power cord or plug is damaged or frayed The unit should be operated only from the type of power indicated on the marked label The socket outlet must be installed near the equipment to be accessible using the system s AC power cord For additional environmental specifica tions see Tablet Dock Specifications on page 7 y Stylistic ST Series Tablet Dock IDENTIFYING THE COMPONENTS Before using your Tablet Dock you should familiarize yourself with its various features Interface Connector AA Side Latch 1 Lock Release I r both sides Li Button Lock Handle Back Latch Ly lower Positioning Guide upper and lower Air Flow Vents Platform Ledge Kensington Lock Slot Emergency Front of base Tray Release Do not use as a carrying handle Tray Release Button Power LED DVD CD RW Combo or CD ROM Drive Figure 1 Front View ral WL Y A Qt L S Easel Release Buttons IEEE 1394 Jack USB 2 0 Ports Qty 3 DC In Jack Line Out Jack External Monitor VGA Port LAN RJ 45 Jack Figure 2 Back View Tablet Dock User s Guide Dock
8. ked and powered up Combo DVD CD RW drive Packaged with the Tablet Dock is a CD containing the applications required to run the DVD and CD RW features The combo drive will only act as a CD ROM drive until you install the additional software To install the software refer to instructions on the CD The instructions for installing and removing disks is the same for both drives For information about the soft ware s features and capabilities refer to the help files associated with the related applications Do not operate your media drive unless your system is sitting on a relatively flat surface Using the drive when the system is not level may damage the drive or prevent proper operation A y Stylistic ST Series Tablet Dock Prolonged use of the media drive such holder tray will come out of the system a short as watching a DVD movie will signifi distance cantly reduce your battery life if no other 2 Gently pull the tray out until the disc can easily be power source is attached Be sure to removed from the tray attach a power adapter when using the 3 Remove the media disc from the holder tray Tablet Dock for prolonged tasks You should periodically check the Fujitsu Web site at us fujitsu com computers for updated drivers All Fujitsu DVD players are set to play DVD titles with region code number 1 North American market The region number is a regional restriction code i defined b
9. le on the right of the dock 1 Plug either the system s AC Adapter or the AC Adapter that came with your Tablet Dock into a wall outlet then into the Tablet Dock s DC Input jack 2 Set the Tablet PC on the Tablet Dock with the system oriented in the same direction as the dock See Figure 4 for location The connector in the back of the system should be aligned with the interface connector on the Tablet Dock Figure 4 Docking the system 3 Press the system against the docking port until you hear a click The click indicates that the side latches are in place Note that the system is not locked into place until the following step is performed 4 Firmly pull the lock handle down as far as it will go This engages the back latches and side latches and locks the system in place 5 Your Tablet Dock is now ready for use You may now attach devices to it support the system when it is installed in The front portion of the base should not i be used as a handle It is designed to the Tablet Dock Stylistic ST Series Tablet Dock UNDOCKING YOUR SYSTEM Use these instructions when you want to remove your system from the Tablet Dock The system can be removed from the Tablet Dock whether the system is operat ing or not 1 Ifyou are running a CD or DVD in the Tablet Dock drive be sure to stop the drive before undocking the system 2 Press the lock r
10. oth the Tablet Dock and your system Product configuration number for both the Tablet Dock and your system Product serial number for both the Tablet Dock and your system Purchase date for both the Tablet Dock and your Stylistic ST Series Tablet PC With the exception of the purchase dates the informa tion you need is on the unit label on the back of your system and on the bottom of your dock TABLET DOCK SPECIFICATIONS Features Details Ports 100 pin docking connector VGA D sub 15 pin female connector DDC compliant Line Out Jack 3 5mm for head phones or external speakers DC input 16VDC IEEE 1394 4 pin standard connector USB Universal Serial Bus 2 0 Ports quantity 3 LAN connector 1000Base T 100Base TX 10Base T RJ 45 System Bay Accommodates CD ROM or DVD CD RW drive Power 16 VDC with current of 3 75 A Dimensions Height 12 95 329 mm Width 8 66 220 mm Depth 10 35 263 mm Weight 5 95 Ibs 2 7 Kg Environmental Operating Temperature 41 95 F 5 35 C Storage Temperature 4 140 F 20 60 C Relative Humidity 20 80 Table 1 Tablet Dock Specifications Stylistic ST Series Tablet Dock Fujitsu Computer Systems Corporation 1250 E Arques Avenue M S 122 Sunnyvale California 94085 FU SU For more information call 1 877 372 3473 or visit our Web site at us fujitsu com computers
11. ttach an External VGA Monitor This option allows you to use an external monitor with your system The only requirement is that the external device monitor projector is a VGA device Consult the instructions that come with the device 1 Securely insert the external monitor plug into the display port on the back of the Tablet Dock Figure 2 Always check the icon by the port before inserting Tighten screws if available 2 You may switch between the internal monitor and external monitor using the Display Configuration utility located in the system tray at the bottom right of the screen or through the Control Panel settings To Attach a USB device If your Tablet PC supports USB 2 0 devices the Tablet Dock will also support USB 2 0 devices Li To attach a USB device securely insert the connector into one of the three USB ports on the left side of the Tablet Dock Figure 2 It may be necessary to wait a short time while the appropriate drivers are located and installed by the system To Attach an IEEE 1394 device The IEEE 1394 interface also known as firewire allows you to attach IEEE 1394 compliant devices e g digital cameras digital video cameras to the docked system To attach an IEEE 1394 device securely insert the connector into the IEEE 1394 jack on the left side of the Tablet Dock Figure 2 Refer to the device manufacturer s installation and usage instructions for configuration instr
12. uctions To Attach External Audio Equipment The Tablet Dock provides a Line Out jack for head phones or external speakers Connecting external speaker headphones or microphone disables the system s internal speaker or internal microphone iJ To attach an external audio device insert the plug into the Line Out jack on the back of the Tablet Dock Figure 2 To Attach a LAN Device The LAN RJ 45 jack allows you to connect the system s internal Fast Ethernet to a LAN or broadband devices such as a cable modem DSL or satellite internet Some models of the Stylistic ST Series Tablet PCs support Gigabit Ethernet If your Tablet PC supports Gigabit Ethernet the Tablet Dock will also support it Li To attach a LAN device insert the plug into the LAN RJ 45 jack on the back of the Tablet Dock Refer to the device manufacturer s installation and usage instructions for configuration instructions USING THE INTERNAL MEDIA DRIVE The Tablet Dock is outfitted with either a CD ROM drive or a DVD CD RW Combo drive depending upon your dock configuration A CD ROM drive allows you to access software data or audio CDs A DVD CD RW combo drive allows you to access movies audio soft ware data or audio DVD CDs and to write data onto recordable CDs CD ROM drive All of the software you need to run the CD ROM drive is installed in the Tablet PC The drive will work as soon as the system is doc
13. y the DVD Forum acting on requirements of Hollywood Different region codes are recorded on video DVD titles for publication in different areas of the world If the regional code of the DVD player does not match the codes on the titles then playback is impossible You can change the region code on the DVD player using the Properties menu of the DVD software but you can only change the region code up to four times After the 4th change the last region code entered becomes permanent and cannot be changed 4 Push the holder tray back in until you hear a click LOADING MEDIA Refer to Figure 8 for the following steps To load a disc into your media player drive follow these steps 1 Push and release the eject button on the front of the drive to open the holder tray The tray will come out of the system a short distance 2 Gently pull the tray out until a media disc can easily be placed in the tray There may be a protective sheet in the tray from when it was shipped make sure it is removed before operating the drive 3 Place the media into the tray label side up with the hole in the center of the disc Snap the disc onto the raised circle in the center of the tray 4 Push the holder tray back in until you hear a click REMOVING MEDIA Refer to Figure 8 for the following steps 1 Push and release the eject button on the front of the media player drive This will stop the drive and the
Download Pdf Manuals
Related Search