Fisher-Price T2065 User's Manual
Contents
1. Seat Mode e Place your child in the seat and secure properly e Slide the vibration switch amp ON or OFF O 11 Storage e Press the button on each end of the frame and remove the base e Press the tab on the toy bar and lift to remove e Store the base and the toy bar in a safe place for future use 12 Care e The pad is machine washable Wash it separately in cold water on the gentle cycle Do not use bleach Tumble dry separately on low heat and remove promptly e The frame and mobile may be wiped clean using a mild cleaning solution and a damp cloth Do not use bleach Do not use harsh or abrasive cleaners Rinse clean with water to remove residue To remove the pad e Unbuckle the restraints e Lift the bottom of the pad from the seat bottom e Remove the pad elastic loops from the pegs on the sides and bottom of the seat e Pull the restraints through the slots in the pad e Remove the pad from the seat To re assemble the pad e Refer to assembly steps 9 142. base is designed to fit one way If it does not seem to fit to the other frame tube turn it around and try again Seat Back 4 e Fit the tabs on the seat bottom into the slots in the seat back e Position one of the swing housings so that the swing arm is facing the inside of the assembly e Fit the swing housing onto the frame tube Hint The swing housing is designed to fit one way If it does not seem to fit try assembling it to the other frame tube Assembly ry G 7 Side View e Fit the end of each swing arm into the grooves in the seat Hinge Rod e Make sure the tab on each side of the seat back is fitted inside the socket on each side of the seat bottom e Insert the hinge rod through the hinge on the seat assembly e Insert a 8 x 2 5 cm screw into the end of the hinge rod Tighten the screw with the Allen wrench Side Rails e Insert a 8 x 2 5 cm screw into each swing arm Tighten the screws with the Allen wrench IMPORTANT Push down on the seat assembly to be sure it s secure to the swing arms e Fit the side rails under the grooved areas under the seat as shown e Insert four 8 x 2 5 cm screws into the holes in the seat e Tighten the screws with the Allen wrench 4 Assembly PE SA Shoulder ai nali Waist al Restraints e Insert the shoulder and waist restraint belts through the slots in the seat pad Hint The shoulder belts come assembled to the seat bac
3. in the previous section to convert the product to seat mode e To turn off swinging slide the swing speed power switch off O Music e Slide the music volume switch to ON with low volume ON with high volume or OFF O Swing and Music Music Volume Switch e To turn off swinging and music slide the main power switch OFF O The power L E D turns OFF Swing Speed Power Switch Calming Vibrations Swing Mode e Place your child in the seat and secure properly f Hint You can turn the toy bar back when placing baby in the seat e Slide the main power switch ON The power L E D turns ON e Slide the swing speed power switch ON e Give the seat a light push to start the swinging motion e Adjust the swing speed power switch to the desired swing motion Setting Hints After turning on power this product may not swing unless there is a child in the seat As with most battery power swings a heavier child will reduce the amount of swinging motion on all settings In most cases the low setting works best for a smaller child while the higher setting works best for a heavier child If the low setting provides too much swinging motion for your child try placing one end of a blanket underneath your child and let the other end of the blanket drape down while swinging If swinging stops while using a lower setting try a higher setting Give the seat a light push to start the swinging motion again
4. Locate the swing sounds battery compartment on a swing housing e Loosen the screws in the battery compartment door with a Phillips screwdriver Remove the battery compartment door e Insert four C LR14 alkaline batteries into the battery compartment e Replace the battery compartment door and tighten the screws with a Phillips screwdriver Vibration Battery Installation e Locate the vibration battery compartment on a swing housing e Loosen the screw in the battery compartment door with a Phillips screwdriver Remove the battery compartment door e Insert one D LR20 alkaline battery into the battery compartment e Replace the battery compartment door and tighten the screw with a Phillips screwdriver e f this product begins to operate erratically you may need to reset the electronics Turn the power off and then back on e When motion or sounds from the product become slow faint or stop replace the batteries e Protect the environment by not disposing of this product with household waste 2002 96 EC Check your local authority for recycling advice and facilities Europe only oI Battery Safety Information In exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product To avoid battery leakage e Do not mix old and new batteries or batteries of different types alkaline standard carbon zinc or rechargeable nickel cadmium e Insert batteries as
5. T2065 Fisher Price N WARNING IMPORTANT KEEP INSTRUCTIONS FOR FUTURE REFERENCE www fisher price co uk Consumer Information WARNING To prevent serious injury or death from falls and being strangled in the restraint system e Always use the restraint system e Not recommended for children who can sit up by themselves 6 months approximately until 9 Kg 20 Ibs e Never leave child unattended e It is dangerous to use this product on an elevated surface e Never use toy bar as a handle N CAUTION This product contains small parts in its unassembled state Adult assembly is required e Please read these instructions before assembly and use of this product e Adult assembly is required e Tools required for assembly Allen wrench included and Phillips screwdriver not included e Requires four C LR14 alkaline batteries for swing sounds Operation and one D LR20 alkaline battery for vibration unit operation Batteries not included IMPORTANT The weight limit for this product is 9 kg 20Ibs If your child weighs less than 9 kg 20Ibs but is really active and appears to be able to climb out of the swing immediately discontinue its use e Product features and decoration may vary from the photographs service fisher price com Great Britain Vanwall Business Park Maidenhead SL6 4UB Helpline 01628 500303 www service mattel com uk Australia Mattel Australia Pty Ltd 658 Chu
6. indicated inside the battery compartment e Remove batteries during long periods of non use Always remove exhausted batteries from the product Dispose of batteries safely Do not dispose of product in a fire The batteries inside may explode or leak e Never short circuit the battery terminals e Use only batteries of the same or equivalent type as recommended e Do not charge non rechargeable batteries e Remove rechargeable batteries from the product before charging e f removable rechargeable batteries are used they are only to be charged under adult supervision securing Your Child N WARNING To prevent serious injury or death from falls and being strangled in the restraint system e Always use the restraint system e Not recommended for children who can sit up by themselves 6 months approximately until 9 Kg 20 Ibs e Never leave child unattended e It is dangerous to use this product on an elevated surface e N b handli e Tighten each waist belt and shoulder belt so that the restraint ever Use toy ar as a Nandie system is snug against your child Please refer to the next section for instructions to tighten these belts Waist Shoulder Belts TIGHTEN LOOSEN e To tighten the waist belts Feed the anchored end of the waist belt up through the buckle to form a loop Pull the free end of the waist belt O e To tighten the shoulder belts Hold the adjuster and pull the shoulder belt down e To lo
7. k in the lower slots for a smaller child To change to the upper slots for a larger child refer to page 10 Crotch Restraint e Insert the crotch restraint belt up through the slot in the seat pad e Insertar el cintur n de la entrepierna en la ranura de la almohadilla e Faire passer la courroie d entrejambe dans la fente du coussin e Fit the pocket on the back of the seat pad onto the seat back Assembly ory Tab J N U g Xo Ka Elastic Loops Bottom View o Elastic Loops 14 e Fit the notch in the seat pad around each swing arm e Hook the seat pad elastic loops to the tabs on the seat 12 e Lift the front edge of the seat pad and insert both elastic loops on the seat pad through the holes in the seat bottom e From the bottom of the seat hook the elastic loops to the tabs on the seat e Fit the clips on the front edge of the seat pad to the front edge of e Insert the end of the toy bar into the socket in the swing housing the seat bottom Hint The toy bar only fits one way If it does not seam to fit turn it around and try again Fisher Price Inc a subsidiary of Mattel Inc East Aurora NY 14052 U S A T2065pr 0726 2009 Mattel Inc All Rights Reserved and designate U S trademarks of Mattel Inc 6 PRINTED IN CHINA Battery Installation Hint We recommend using alkaline batteries for longer battery life Swing Sounds Battery Installation e
8. osen the waist belts Feed the free end of the waist belt up through the buckle to form a loop Enlarge the loop by pulling on the end of the loop toward the buckle e Pull the anchored end of the waist belt to shorten the free end of the waist belt Pe e To loosen the shoulder belts Pull the adjuster down Note After adjusting the restraint system to fit your child make Sure you pull on it to be sure it is securely fastened Crotch Belt Restraint System e Place your child in the seat e Insert the ends of the waist belts through the slots in the shoulder belts e Pull the crotch belt up between your child s legs and fasten both waist shoulder belts to the crotch belt Make sure you hear a click on both sides securing Your Child Larger Baby e Insert the ends of the shoulder belts through the upper slots in the pad Shoulder Belts e Push to remove the shoulder belts from the seat back Smaller Baby e Insert the ends of the shoulder belts through the lower slots in the pad Easy Conversion Swing Mode Seat Mode e Pull and slide the seat latch off of the seat post e Lower the seat post on the seat bottom e While holding the seat post lift the seat latch Slide the seat latch over the seat post 10 Swinging Motion Soothing Sounds and Calming Vibrations Main Power Switch Vibrations will not work in swing mode To use calming vibrations follow the instructions
9. rch Street Locked Bag 870 Richmond Victoria 3121 Australia Consumer Advisory Service 1300 135 312 New Zealand 16 18 William Pickering Drive Albany 1331 Auckland Asia Mattel East Asia Ltd Room 1106 South Tower World Finance Centre Harbour City Tsimshatsui HK China Malaysia Diimport amp Diedarkan Oleh Mattel SEA Ptd Ltd 993532 P Lot 13 5 13th Floor Menara Lien Hoe Persiaran Tropicana Golf Country Resort 47410 PJ Tel 603 3341 9052 Mattel Europa B V Gondel 1 1186 MJ Amstelveen Nederland Assembled Parts IMPORTANT Please remove all parts from the package and identify them before assembly Some parts may be packed in the pad 2 Side Rails LET Seat Pad Hinge Rod Allen Wrench Note Tighten all assembled screws with the enclosed Allen wrench 8 x 2 5 cm Screw 7 M6 x 25 mm Screw 2 Both Shown Actual Size Assembly IMPORTANT Before assembly and each use inspect this product for damaged hardware loose joints missing parts or sharp edges DO NOT use if any parts are missing or broken Contact Fisher Price for replacement parts and instructions if needed Never substitute parts 3 e Insert an M6 x 25 mm screw into the hole in the swing housing e Insert and snap the base into the sockets in each side of the Fully tighten the screw with the Allen wrench frame as shown e Repeat this procedure to assemble the remaining swing housing Hint The
Download Pdf Manuals
Related Search