Fisher & Paykel WD1001 User's Manual
Contents
1. ILLUSTRATION 7 Hand tighten as tight as possible Do not try to tighten with a wrench or hammer ILLUSTRATION 7 MOUNTING THE DISPOSER 1 Loosen and remove the hinged clamp ILLUSTRATION 9 The rubber splash guard should be attached to the waste disposal unit and not to the sink flange Using two hands push the disposer upwards so that the inner groove on the splash guard locks on to the sink flange If necessary use cooking oil to lubricate the inner rim on the exposed side top side of the splash guard Once engaged the disposer will hang freely by itself ILLUSTRATION 10 Place the hinged clamp around the splash guard and lock in place ILLUSTRATION 11 amp 12 The appliance must be installed so that the reset button is readily accessible a J a A 4 o m 1 5 Eo ILLUSTRATION 9 ILLUSTRATION 10 ILLUSTRATION 11 ILLUSTRATION 12 PLUMBING CONNECTION Check inside the disposer to make sure that no foreign objects are inside the grinding hopper Rotate the disposer so that the discharge outlet faces you ILLUSTRATION 13 P 10 Slide the waste pipe flange on to the waste pipe Attach the rubber gasket to the waste pipe so that the thin lip is facing the disposer ILLUSTRATION 14 Insert the non notched end of the waste pipe flange into the slot below the waste outlet on the waste disposer ILLUSTRATION 15 Use the screw to tighten the waste pipe to2. FISHER amp PAYKEL AUTHORISED SERVICE CENTRE F Damage to the Product caused by accident neglect misuse or Act of God SERVICE UNDER THIS EXPRESS WARRANTY MUST BE PROVIDED BY A FISHER amp PAYKEL AUTHORISED SERVICE CENTRE SUCH SERVICE SHALL BE PROVIDED DURING THEIR NORMAL BUSINESS HOURS THIS EXPRESS WARRANTY CERTIFICATE SHOULD BE SHOWN WHEN MAKING ANY CLAIM NOTE THIS EXPRESS WARRANTY IS OFFERED AS AN EXTRA BENEFIT AND DOES NOT AFFECT YOUR LEGAL RIGHTS Customer Date of Purchase MODEL SERIAL NO This Warranty applies only to an appliance purchased in New Zealand Please turn over 247 FISHER amp PAYKEL WASTE DISPOSAL INSTALLATION DIMENSIONS ura E A SO naka ef ome foe fm fe WD2002 Measurements in mm Dimensions A Distance from bottom of sink to bottom of disposer B Width of disposer C Distance from centre of disposer to centre of drain pipe D Length from bottom of sink to centre of drain opening E Length from centre of drain opening to bottom of drain pipe 12 We want you to be a happy satisfied customer If you need service or assistance we suggest you follow these steps 1 Before calling for assistance Check the things you can do yourself Ensure that the appliance is correctly installed and that you are familiar with it s normal operation 2 If you need service Contact the Dealer from whom the appliance was purchased who will arrange service or advise you where to ob
3. FISHER amp PAYKEL waste disposal will have no problem grinding food waste some items should never be placed into it In particular do not attempt to grind the following Metal Silverware nails tacks wire bread bag ties staples Glass Jars bottles pieces of pottery or crockery Lye or drain cleaning chemicals Excessive quantities of fat or grease Any fibrous materials Remember your FISHER amp PAYKEL waste disposal is designed for grinding food waste only With proper use and care it will provide you with many years of trouble free service Note Do not operate your garbage disposer while it is upside down If the supply cord is damaged it must be replaced by a qualified electrician SAFETY FEATURES Your disposer is equipped with an overload protector which prevents the disposer from running should it overload Overload generally occurs when a foreign object has fallen into the disposer and jammed the impellors thus preventing the motor from turning Overload may also occur if you have put too much food waste into the disposer at one time If overload occurs turn off the disposer and remove the foreign matter or food waste from the disposer Insert a hex wrench into the opening at the bottom of the motor shaft and rotate the tool clockwise ILLUSTRATION 18 Wait five to ten minutes push the red reset button on the bottom of the disposer and restart the machine ILLUSTRATION 18 DISPOSER MAINTENANCE With normal us
4. Fisher amp Paykel Waste Disposal User s Guide Models WD1001 and WD2002 FISHER amp PAYKEL WASTE DISPOSAL INSTALLATION INSTRUCTIONS IMPORTANT Before you start to install your FISHER amp PAYKEL Waste disposal please read all of these instructions carefully This set of instructions is general local building codes take precedence over the instructions in this guide and your installation must conform to the building codes in your area Be sure to retain this set of instructions for future reference TOOLS REQUIRED FOR INSTALLATION You may need the following tools and supplies when installing your disposer ILLUSTRATION 1 aeo la O mme oo a me a ii YI Pipe wrench Hacksaw i g ke SS Rubber Mallet Electrical Switch 20 amp rating UNPACKING YOUR WASTE DISPOSAL Remove the waste disposal from the packing carton being careful not to misplace any of the pieces Inside the carton you should find the following ILLUSTRATION 2 Sink Drain plug Sink Frange Sink Flange Rubber Gasket Sink Flange Fiber Gasket Mount Ring Hinged Clamp Waste Pipe Flange amp Screws Rubber Gasket 0 Hexagon Wrench OMONDORWDY ILLUSTRATION 2 If any parts are missing contact your dealer before beginning installation REMOVE OLD DISPOSER OR SINK WASTE REDUCER IF REMOVING AN OLD DISPOSER amp INSTALLING A FISHER amp PAYKEL WASTE DISPO
5. SAL Disconnect the drain where it connects to the old disposer s waste pipe ILLUSTRATION 3 Then dismount the disposer from the sink mounting assembly Finally remove the sink flange from the topside of the sink ILLUSTRATION 4 IF REMOVING A SINK WASTE REDUCER If your sink is equipped with a sink waste reducer instead of a waste disposer remove the nut or threaded ring holding the waste reducer in place ILLUSTRATION 5 ILLUSTRATION 5 Then push the waste reducer up through the drain opening ILLUSTRATION 6 If the drain opening on your sink is covered with sealant remove as much of the putty as possible from the rim of the sink drain hole Unless you have a new home be sure that the existing trap and drain lines are clear If the drain line is not clear use a plumber s rod or auger to remove all impediments INSTALL THE SINK MOUNT FLANGE If a hole needs to be cut in the sink it should be diameter PRESS DOWNFIRMIY 87 92mm WHEN ASSEMBLING First place the sink flange rubber gasket over the sink flange s bal threaded ring Insert the flange and rubber gasket in to the sink drain opening from the top side of the sink It is not necessary to use plumber s putty when installing the sink flange Second place the sink flange fiber gasket over the sink flange s threaded ring Next attach the mount ring and tighten with one hand while using the other hand to press down on the sink flange
6. age your disposer should not require any special care The motor is permanently lubricated and will not require oiling under normal usage conditions lf used according to the operating instructions above your disposer should not require cleaning However should it start to smell grinding a tray of ice cubes in the disposer will clean the grinding components Grinding a lemon cut into quarters will also give your disposer a fresh clean smell 10 Express Warranty Fisher amp Paykel Appliances Limited FULL TWO YEAR WARRANTY FROM DATE OF PURCHASE FISHER amp PAYKEL UNDERTAKES TO Repair or at its option replace without cost to the owner either for material or labour any part of the product which is found to be defective within TWO YEARS of the date of purchase THIS EXPRESS WARRANTY DOES NOT INCLUDE A Service calls to 1 Correct the installation of the Product 2 Instruct you how to use the Product 3 Replace house fuses or correct house wiring or plumbing 4 Replace light bulbs Damage when the product has been used otherwise than 1 In normal domestic use or 2 In accordance with the Product s Use amp Care booklet C Damage when the Product has been dismantled repaired or serviced by other than a FISHER amp PAYKEL AUTHORISED SERVICE CENTRE D Normal recommended maintenance as set out in the Products Use amp Care booklet E Cartage or mileage when the product is situated more than 50kms from a
7. ions before using the appliance To reduce the risk of injury close supervision is necessary when an appliance is used near children 3 Do not put fingers or hands into the waste disposal unit 4 Turn the power switch to the off position before attempting to clear a jam or remove an object from the dispenser 5 When attempting to loosen a jam in the waste disposal use the hexagonal wrench provided See safety features for further information 6 When attempting to remove objects from the waste disposal use long handled tongs or pliers 7 Do not put the following into the disposer a Shells b Drain cleaner c Glass china or plastic d Large whole bones e Metal such as bottle caps tin cans or aluminium foil f Whole corn husks g Any fibrous materials 8 When not operating the disposer leave the sink drain plug in place to reduce the risk of objects falling into the disposer SAVE THESE INSTRUCTIONS OPERATING INSTRUCTIONS 1 Remove the sink drain plug Turn on the cold water to a medium high flow allowing the water to flow into the waste disposer 3 Turn on your waste disposer 4 Put all food waste into the disposer while the disposer is operating and the water running Do not put your hand into the disposer 5 Let your disposer continue to run for about half a minute after the grinding has stopped 6 Turn off the disposer 7 Turn off the water when the impellers have stopped spinning CAUTION While your
8. tain service Your Authorised Service Centre Fisher amp Paykel appliances USS ed E E AEE E E Authorised Service Telephone no cccceeecceseeceeeeeceeeeseesesees Fisher amp Paykel has a network of FISHER amp PAYKEL AUTHORISED SERVICE CENTRES whose fully trained technicians can carry out any service necessary on your appliance 3 For further assistance if necessary Fisher amp Paykel Customer Care Centre Freephone 0800 37 2273 PO Box 58 732 Telephone 09 273 0448 Greenmount Facsimile 09 273 0656 AUCKLAND One of our Customer Representatives can instruct you on how to obtain satisfactory operation from your appliance or if necessary recommend a Fisher amp Paykel Authorised Service Centre in your area If you call or write please provide your name and address model number serial number date of purchase and a complete description of the problem This information is needed in order to better respond to your request for assistance 571972 ERC B 13
9. the disposer Rotate the disposer so that the waste pipe lines up with the drain trap ILLUSTRATION 16 Once the waste pipe is lined up use a pipe wrench to tighten the slip nut on the drain trap ILLUSTRATION 17 If fitted to a double sink the use of separate traps for the disposer and the sink are recommended Make sure that the hinged clamp is locked firmly in place ILLUSTRATION 17 ELECTRICAL CONNECTIONS ELECTRICAL CONNECTIONS FOR A FACTORY WIRED DISPOSER Your FISHER amp PAYKEL waste disposal is equipped with a pre wired power cord simply plug it in Electrical connections should be done by a registered electrician Your FISHER amp PAYKEL waste disposal is equipped with a standard 3 pin plug An earthed 3 pin power socket should be mounted in the cupboard under the sink Power to the socket must be controlled by a standard wall switch positioned a minimum of 500 mm from the sink As per your local Regulations CONGRATULATIONS The installation of your FISHER amp PAYKEL waste disposal is now complete Plug the power cord in and read the following safety instructions before proceeding to the section explaining the proper usage and maintenance of your new waste disposer INSTRUCTION PERTAINING TO A RISK OF FIRE ELECTRICAL SHOCK OR INJURY TO PERSONS IMPORTANT SAFETY INSTRUCTIONS WARNING When using electric appliances basic precautions should always be followed including the following 1 Read all instruct
Download Pdf Manuals
Related Search