Epson P260 User's Manual
Contents
1. J Always turn the printer off before changing the roll paper Accidental operation of the take up motor can cause injury L Make sure that the take up reel unitis securely locked into place Incorrect installation can cause the roll to fall and cause injury J Do not touch the auto take up reel unit while it is operating Hair or clothing can become caught in the unit and cause injury L Donotlook directly at the sensor beam Doing so may cause permanent eye damage For United Kingdom users Use of options Epson UK Limited shall not be liable against any damages or problems arising from the use of any options or consumable products other than those designated as Original EPSON products or EPSON Approved products by Epson UK Limited Warnings cautions and notes Warnings must be followed carefully to avoid bodily injury Cautions must be observed to avoid damage to your equipment Notes contain important information and useful tips on the operation of the product Checking the Package Contents Make sure that all the items shown below are included and not damaged Remove all protective materials packed with this unit before you set it up and turn on the power Save all packaging and protective materials in case you need to transport the printer later Drive unit with control box Movable unit Take up reel core 3 inch Sensor unit Screws Large 2 small 4 Cable clamps D2. For European Users This product conforms to CE marking requirements in accordance with EC Directive 89 336 EEC Dieses Produkt entspricht den Bedingungen zur CE Kennzeichnung in bereinstimmung mit der EG Richtlinie 89 336 EWG Ce produit est estampill CE et conforme aux directives europ ennes 89 336 EEC Este producto cumple los requisitos de se alizaci n dela CE seg n lo dispuesto en las directivas 89 336 EEC de la CE Il prodotto conforme ai requisiti CE ed alle direttive EC 89 336 EEC Este produto est em conformidade com os requisitos de etiquetagem CE nos termos da Directiva 89 336 EEC English Safety Instructions Important safety instructions Read all of these instructions and save them for later reference Follow all warnings and instructions marked on the unit J Do not place the unit near a radiator or heat source J Unplug the printer before cleaning Clean with a damp cloth only Do not spill liquid on the unit _I Except as specifically explained in this guide do not attempt to service the unit yourself L Unplug the unit and refer servicing to qualified service personnel under the following conditions if liquid has entered the unit if the unit has been dropped or the cabinet damaged if the unit does not operate normally or exhibits a distinct change in performance Note Adjust only those controls that are covered by the operating instructions A few precautions
3. below 76 2mm 3 Length of the take up reel core as related to the width of the roll paper is shown below Keep a gap of at least 20 mm between the flanges and the right and left edges of the roll paper otherwise the roll paper cannot be wound up with the auto take up reel unit properly 50 8mm 2 Roll paper TT M 20mm gap at least 20mm gap at least The installation of the Auto Take up Reel Unit is complete When you use the unit see the Reference Guide Specifications Note Q This product is designed for use with printer models P260 A B or C Q This product conforms to CE marking requirements in accordance with EC Directive 698 336 EEC Usable paper width Max 1118 mm min 210 mm Paper length No greater than a 10 cm roll diameter on a 2 inch core ora 15 cm roll diameter on a 3 inch core Max sheet diameter 180 mm paper must not after take up come in contact with the top horizontal strut between the uprights of the base unit jem ume Operating environment Temperature 10 to 35 C without condensation Humidity 20 to 80 without condensation EPSON OVERSEAS MARKETING LOCATIONS Epsm America Inc 3840 Kilroy Airport Way Long Beach CA 90806 2469 Phone 562 981 3840 Fax 562 290 5220 EPSON DEUTSCHLAND GmbH Z lpicher Straf3e6 40549 D sseldorf Germany Phone 0211 56030 Fax 0211 5047787 EPSON AUSTRALIA PTY LTD 70 GIBBES STREET CHATSWOOD 206
4. 7 NSW Phone 2 9903 9000 Fax 2 9903 9177 EPSON HONG KONG LT D Rooms 4706 10 47 F China Resources Bldg 26 Harbour Road Wanchai Hong Kong Phone 2585 4300 Fax 2827 7083 EPSONITALIA S p A V le F lli Casiraghi 427 20099 Sesto S Giovanni MI Italy Phone 3902262331 Fax 39022440750 SEIKO EPSON CORPORATION Hirooka Office 80 Harashinden Hirooka Shiojiri shi Nagano ken 399 0785 Japan EPSON UK LTD Campus 100 Maylands Avenue Hemel Hempstead Herts HP2 7TJ U K Phone 44 01442 261144 Fax 44 01442 227227 EPSON FRANCE S A 68 bis rue Marjolin 92300 Levallois Perret France Phone 33 1 40 87 37 37 Telex 610657 EPSON SINGAPORE PTE LTD No 1 Temasek Avenue 36 00 Millenia Tower Singapore 039192 Phone 065 33 77 911 Fax 065 33 41 185 EPSON TAI WAN TECHNOLOGY amp TRADING LTD 10F No 28 Nanking E Road Sec 3 Taipei Taiwan R O C Phone 02 717 7360 Fax 02 712 9164 EPSON IBERICA S A Av de Roma 18 26 08290 Cerdanyola del Valles Barcelona Spain Phone 582 15 00 Fax 582 15 55 EPSON PORTUGAL SA R do Progresso 471 1 Perafita 4460 Matosinhos Portugal Phone 02 996 14 02 Fax 02 996 14 11 2000 August Printed in Japan 00 xx xx
5. EPSON Auto lake up Reel Unit User s Guide English XXXXXXX XX All rights reserved No part of this publication may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical photocopying recording or otherwise without the prior written permission of SEIKO EPSON CORPORATION The information contained herein is designed only for use with this EPSON product EPSON is not responsible for any use of this information as applied to other products Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages losses costs or expenses incurred by purchaser or third parties as a result of accident misuse or abuse of this purduct or unauthorized modifications repairs or alterations to this product or excluding the U S failure to strictly comply with SEIKO EPSON CORPORATION s operating and maintenance instructions SEIKO EPSON CORPORATION shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION General Notice Other product names used herein are for identification purposes only and may be trademarks of their respective owners EPSON disclaims any and all rights in those marks Copyright O 2001 by SEIKO EPSON CORPORATION Nagano Japan
6. into the socket located at the top rear of the control The sensor components are shown below box on the drive unit Light detector Connector Light emitter 1 Setthesensor unit s light emitter in the bottom of the drive unit and then secure it witha screw 4 Fasten the cable using the cable clamps provided Use as many of the clamps as necessary to secure the cable You may need to do this from the back of the printer 2 Set the sensor unit s light detector in the base unit s bottom left side and then secure it with a screw Installing the 3 inch take up reel 4 Turn the lock lever to the front to lock the core movable unit Note If you want to install a 2 inch take up reel core instead see the next section for instructions Also you can re use the core from a used paper roll See your Online Guide 1 Make sure that the lock lever is released turned to the left Slide the movable unit to the left end of the horizontal strut The installation of the3 inch auto take up reel unit is complete Installing a 2 inch take up reel core If you want to use the 2 inch take up reel core you need to reverse the flanges on the drive unit and movable unit first Follow the steps below 2 Slip one end of the take up reel core over the E a a a OMS Aa bak NG BASA ALAGA ANG 2 Remove the cap and fas
7. rafting tape Movable unit stopper Cable connector Installing the Auto Take Up Reel Unit Caution Use only the provided screws when installing the auto take up reel unit Use of non issue screws can leave components insecurely fastened increasing the risk of injury and printer damage Before starting J Make sure that the printer is turned off L Remove the paper basket or push the front part of the paper basket to the rear to keep it out of the way Installing the drive unit Installing the movable unit 1 Attach the drive unit on the horizontal strut as 1 Turn the lock lever to the left to release it shown below 2 Tighten the two screws to attach the drive unit 2 While holding the movable unit attach the to the printer securely movable unit stopper on the bottom of the movable unit Snap the two protrusions of the stopper into the movable unit so the stopper does not fall off 3 Plug the cable connector into the connector on top of the control box of the drive unit then tighten the screws on both sides of the connector 3 Tighten the two screws to attach the movable unit to the horizontal strut 4 Plug the other end of the cable connector into the connector on the back of the printer as shown below then tighten the screws on both sides of the connector Installing the sensor unit 3 Plug the connector of the sensor unit cable
8. tener from the drive unit 3 Insert the flanged knob on the movable unit into the other end of the take up reel core 3 Remove the flange 6 Remove the fastener from the movable unit Next remove the flange 4 Reverse the flange so that the smaller knob is 7 Reverse the flange so that the smaller knob is positioned Geck the outside then replace it on positioned on the outside then replace it on the drive unit the movable unit 5 Replace the cap and fastener which you removed in step 2 on the drive unit 8 Replace the fastener which you removed in step 6 back on the movable unit 9 Install the 2 inch take up reel core in the auto take up reel unit in the same manner as described in Installing the 3 inch take up reel core on page 5 Using the core from a used paper roll as a take up reel core Before you install a used paper roll as the take up reel core note and check the following J Ifthe paper roll core is deformed or damaged it cannot be used as a take up reel core _1 Make sure that there is no looseness between the core and the flanges on the drive unit and movable unit J To wind up 36 inch wide roll paper use a 44 inch wide take up reel core To wind up 44 inch wide roll paper use a 46 inch paper roll core The optional Take Up Reel Core C815091 for 44 inch wide roll paper is available for purchase Contact your dealer Diameters of the knobs on the flange are shown
Download Pdf Manuals
Related Search