Epson ActionNote 650 Product Support Bulletin
Contents
1. EPSON AMERICA INC E PS O N Product Support Bulletin SUBJECT MS Windows 3 x Stylus 400 800 Color Printer Driver problems using the ActionNote 650 Series NoteBook Computer Date 11 5 94 PSB No PSB S 0182 Page s 1 of 2 Originator DS This bulletin provides additional information to allow printer driver ver 1 03E for the Stylus 400 800 and Color printers to complete the installation process when connected to Epson ActionNote 650 Series computers in the Windows 3 x environment When attempting to install the 1 03E printer driver the following warning message appears This driver cannot be updated because it is currently being used by windows Wait until Windows is finished using the driver and then try again This is caused by a conflict with the Chips amp Technologies 65540 256 color video driver and the printer installation process The following steps will help complete the installation l Exit Windows to the DOS prompt C gt 2 Change directories to Windows Type CD Windows Hit ENTER 3 At the C Windows prompt type SETUP and Hit ENTER 4 After the SETUP screen appears with the UP and DOWN arrows select the DISPLAY line Hit ENTER 5 A BOX will appear near the bottom of the screen containing video drivers With the DOWN ARROW key move through the drivers and find either a CHIPS 65540 16 color driver or select the Windows VGA driver Hit ENTER Hit ENTER two more times to exit SETUP 6 Type WIN to load Wind2. ows In the MAIN program group find CONTROL PANEL and double click In CONTROL PANEL find PRINTERS and double click Continue with the printer installation 7 After completing the installation follow steps 1 through 4 to change back to the Chips 65540 256 color driver you wish to use Page s 2 of 2 PSBO182 8 Re start Windows and go to the MAIN program group open FILE MANAGER From the C WINDOWS SYSTEM subdirectory run EPSPLMGR EXE by double clicking on the file name This will load the Epson Spool Manager 9 From the Spool Manager screen select the QUEUE pull down menu then select SETUP 10 From the SETUP screen enable the Print Manager by selecting this option 11 Close the Spool Manager and exit File Manager The installation 1s complete Steps 7 through 10 are required when the parallel port is set to BI DIRECTIONAL in SETUP If the parallel port is set to NORMAL steps 7 through 10 are not required The latest version v1 04 of the Stylus Printer Driver is available on the Epson RBBS as file name STY104 EXE which resolves the above issues
Download Pdf Manuals
Related Search