Emerson LK31 User's Manual
Contents
1. all model numbers shown on the product with your request e To return the product to an authorized service center call 1 800 654 3545 for the address of the nearest authorized service center You will be responsible for all insurance freight or other transportation charges to our factory or authorized service center Your Emerson Light Fixture should be properly packed to avoid damage in transit since we will not be responsible for any such damage What Is Not Covered This warranty also does not cover any defects malfunctions or failures caused by e Repairs by persons not authorized by Emerson Electric Co e Use of parts or accessories not authorized by Emerson Electric Co Mishandling improper installation modifications or damage to your light fixture while in your possession or e Unreasonable use misuse abuse including failing to do reasonable and necessary maintenance and normal wear and tear Additionally this warranty and any implied warranty of merchantability or fitness for a particular purpose are voided when e The original purchaser or user ceases to own the product or e The ceiling fan is moved from its original point of installation This warranty is only valid within the 50 states of the United States and the District of Columbia No other written or oral warranties apply and no employee agent dealer or other person is authorized to give any warranties on behalf of Emerson Electric Co REPAIR REPLACEMENT OR A REFUND ARE THE2. is missing or damaged Contact your dealer for replacement NOTE For installation on Emerson fans with a center screw in modular detachable switch cup proceed to step 1 page 2 For fans with center screw in switch housing cover proceed to step 1 page 3 Installation on Emerson Fans with a Center Screw and with Modular Detachable Switch Cups 1 Remove all parts and parts packages from the carton WARNING To avoid possible electrical shock be sure electricity is turned off at the main fuse or circuit breaker box before wiring 2 Remove the switch cup 1 from the cover plate 2 by removing the three screws 3 around the side of the switch cup Figure 1 3 Disconnect the motor connector 4 from the switch cup connector 5 Figure 1 4 Remove the center screw 6 from the switch cup Figure 1 4 MOTOR 2 COVER PLATE CONNECTOR 5 SWITCH CUP CONNECTOR 1 SWITCH CUP 6 CENTER SCREW Figure 1 5 Carefully locate the white and blue wires labeled either L or LIGHT in the switch cup and remove the wire connectors from the wires 6 Insert the black and white wires from the light fitter 7 through the center hole in the switch cup Figure 2 and thread the switch cup onto the light fitter Hold wires taut while installing switch cup to prevent the wires from twisting Securely tighten the fitter to the switch Cup 7 Insert the black and white wires through the lockwa
3. EXCLUSIVE REMEDIES AVAILABLE UNDER THIS WARRANTY AND EMERSON IS NOT RESPONSIBLE FOR DAMAGES OF ANY KIND INCLUDING INCIDENTAL AND CONSEQUENTIAL DAMAGES Incidental damages include but are not limited to such damages as loss of time and loss of use Consequential damages include but are not limited to the cost of repairing or replacing other property which was damaged if this product does not work properly How State Law Relates To The Warranty Some states do not allow the exclusion or limitation of incidental or consequential damages so the above exclusion or limitation may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state SS x Part No BP7226 1 EMERSON Form No F40BP72260001 DIVISION OF EMERSON ELECTRIC CO Air Comfort Products 8100 W Florissant e St Louis MO 63136 Printed in China 12 06 EMERSON Model LK31 SUITABLE FOR DAMP LOCATIONS THREE 60 WATT CANDELABRA BULBS Ceiling Fan Light Fixture Owner s Manual Net Weight 5 3 Lbs Low Profile Damp Light Model LK53 SUITABLE FOR DAMP LOCATIONS THREE 60 WATT CANDELABRA BULBS 4 WARNING Safety Instructions To avoid fire shock and serious personal injury follow all instructions carefully 1 Read your Owner s Manual carefully before installing the light fixture Retain Owner s Manual for future reference 2 Be careful of the fan and blades when cleaning painting or working near
4. Installation of Glass Bowl WARNING ao READ AND SAVE THESE INSTRUCTIONS NOTE YOUR LIGHT KIT MAY NOT RESEMBLE f THE ONE PICTURED 8 LIGHT FITTER To avoid fire hazard do not exceed three 60 watt max candelabra base light bulbs 7 THREADED NIPPLE 1 Install a 60 watt max candelabra base light bulb not included into each of the three lamp holder sockets Figure 6 2 Remove the bottom nut 1 the rubber washer 4 and the ring nut 3 from the light Eo fitter 8 3 Place the glass bowl 6 onto the threaded nipple 7 Align the fan chain with the small ene hole on the glass bowl Position the rubber BOWL HOLDER washer 4 and the ring nut 3 onto the ene 4 RUBBER WASHER threaded nipple and tighten finger tight 1 BOTTOM nur p cade 4 Install the wire bound bowl holder 6 by positioning the bowl holder against the yt le pyres bottom of the glass bowl 6 on the threaded Figure 6 nipple 7 Align the small hole in the guide ai ae oe CAUTION Never use pliers to tighten 5 Guide the light switch chain through the ottom nut against the bowl A broken or bottom nut Tighten the bottom nut onto the damage bowl will most surely result a threaded nipple finger tight 8 Turn on power at the main fuse or circuit 6 Place the chain from the fan speed switch breaker box through the small hole in the glass bowl and NOTE It is advisable to periodically check guide plate the tight
5. es into the switch housing 1 8 Attach the cover light fitter 5 6 to the switch assembly housing 1 using the two screws 2 that were removed in Step 2 Figure 4 WARNING To avoid fire or electrical shock be careful not to pinch wires between the switch housing assembly and the cover 9 Proceed to Installation of Glass Bowl section
6. ness of the bottom nut Fan 7 Attach the extension chain supplied with the operation may loosen this nut light kit to the fan speed switch chain LIMITED WARRANTY What The Warranty Covers All products covered by this Owner s Manual are warranted against all defects in workmanship and materials You must be the original purchaser or user of the product to be covered What The Period Of Coverage Is All components are covered by this warranty for one year from the date you purchased your light fixture ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE MADE WITH RESPECT TO COMPONENTS AND ACCESSORIES IS ALSO LIMITED TO ONE YEAR What Will Emerson Electric Co Do To Correct Problems Emerson Electric Co will replace a defective Emerson Light Fixture at no charge to you WE WILL SHIP THE REPAIRED PRODUCT OR REPLACEMENT TO YOU AT NO CHARGE BUT YOU ARE RESPONSIBLE FOR ALL COSTS OF REMOVAL REINSTALLATION AND SHIPPING OF THE PRODUCT TO EMERSON ELECTRIC CO How Can You Get Service YOU MUST HAVE PROOF OF YOUR PURCHASE OF THE LIGHT FIXTURE TO OBTAIN LIMITED WARRANTY SERVICE KEEP YOUR RECEIPT OR OTHER PROOF OF PURCHASE You can return the product to our factory or to your nearest authorized service center e To return the product to the factory obtain a return authorization and service identification tag by writing to Air Comfort Products Division of Emerson Electric Co 8100 W Florissant Ave St Louis MO 63136 Include
7. s and parts packages from carton WARNING To avoid possible electric shock be sure electricity is turned off at the main fuse or circuit breaker box before wiring 2 Remove the cover from fan switch housing 1 by removing the two outer screws 2 See Figure 4 3 Remove the center screw 4 in the switch housing cover 5 Insert the black and white wires from the light kit fitter 6 thru the hole and thread the switch housing cover tightly onto the light kit fitter 4 Insert the black and white wires through the lockwasher 7 and hex nut 8 supplied Firmly tighten the hex nut to secure the light kit fitter to the switch cup 5 Carefully pull down the white and blue wires from the switch housing 1 and remove the wire connectors 1 SWITCH HOUSING ASSEMBLY k FAN SWITCH B CHAIN 3 WIRE BLUE WIRE i CONNECTORS BLACK WIRE WHITE WIRES 8 HEX NUT par a 7 LOCKWASHER 2 soens a 4 CENTER SCREW 6 LIGHT FITTER Figure 4 6 Connect the white wire from the ceiling fan to the white wire of the light kit fitter 6 Connect the blue wire from the ceiling fan to the black wire of the light kit fitter Use listed wire connectors 3 previously removed in step 3 to make connections Figures 4 and 5 c gt _ _ To avoid possible fire or electrical shock make certain no bare wire strands are exposed outside wire connectors Figure 5 7 Carefully tuck all wires and splic
8. sher 7 and hex nut 8 supplied Firmly tighten the hex nut to secure the light kit fitter to the switch cup 8 Connect the white wire from the switch cup to the white wire of the light fitter Figure 2 Connect the blue wire from the switch cup to the black wire of the light fitter Use listed wire connectors previously removed in step 5 to make connections Figures 2 and 3 2 COVER PLATE Se 5 SWITCH CUP CONNECTOR a CONNECTOR 6 WIRE BLUE WIRE CONNECTORS na WHITE WIRES 9 HEX NUT FAN SWITCH 8 LOCKWASHER 1 CHAN NOTE YOUR FITTER MAY NOT LOOK THE 7 LIGHT FITTER SAME AS THE ONE IN THIS ILLUSTRATION HOWEVER IT INSTALLS IN A SIMILAR MANNER Figure 2 9 Carefully tuck all wires and splices into the switch cup 1 Figure 2 10 Connect the motor connector 4 to the switch cup connector 5 11 Position the cup light fitter 1 7 on the cover plate 2 and install the three screws 3 that were previously removed in step 2 and tighten securely gt _ O To avoid possible fire or electrical shock make certain no bare wire strands are exposed outside wire connectors Figure 3 M WARNING To avoid possible fire or electric shock be careful not to pinch wires between switch cup and the cover plate 12 Proceed to Installation of Glass Bowl section Installation on Emerson Fans With Center Screw in Switch Housing Cover Not Modular Switch Cup 1 Remove all part
9. the fan Before installing or servicing the light fixture or ceiling fan switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally When the service disconnecting means cannot be locked securely fasten a warning device such as a tag to the service panel Do not exceed the wattage indicated on fixture ADDITIONAL SAFETY INSTRUCTIONS FOR INSTALLATION To avoid possible electrical shock be sure electricity is turned off at the main fuse or circuit breaker box before wiring Make certain no bare wires are exposed outside the wire connectors All wiring must conform to national and local electrical codes Follow the recommended instructions for the proper method of wiring your new light fixture If you feel you do not have enough electrical wiring knowledge or experience have your light fixture installed by a licensed electrician Any electrical work not described in this manual should be performed by a licensed electrician WARNING To reduce the risk of possible fire and electrical shock install only on Emerson Model CF652 CF653 CF670 CF680 CF 742 and CF2000 Ceiling Fans installed in damp locations Permissible to use this light kit on all CF and F Series Ceiling Fans installed in indoor locations Form No F40BP72260000 Part No BP7226 1 U L Model No LK31 LK53 Assembly and Installation a WARNING Do not install or use the fixture if any part
Download Pdf Manuals
Related Search