Emerson Fisher 4320 Instruction Manual
Contents
1. Instruction Manual Supplement 4310 4320 Wireless Position Monitor D103856X012 April 2014 Hot Swap Procedure Supplement to e TopWorx 4310 Wireless Position Monitor with On Off Control Option Instruction Manual D103622X01 2 e Fisher 4320 Wireless Position Monitor with On Off Control Option Instruction Manual D103621X012 This procedure is used to swap out a depleted power module with a new power module without having to remove power from the device It requires two test leads with banana plug connectors and micro plunger clips and a new power module This allows the device to maintain operation and avoids disrupting the wireless network Note A Hot Swap parts kit is required for this procedure Contact your Emerson Process Management sales office for kit information A WARNING This procedure can only be performed when the position monitor is located in a non hazardous location Performing the Hot Swap procedure in a hazardous area could result in personal injury or property damage Refer to figure 1 1 Attach the banana plug connector end of the test leads to the new power module taking care to prevent the wires from shorting 2 Connect the clips to to the WP2 WP3 Backup Power Terminals on the main board 3 Loosen the four self tapping screws see figure 2 and remove the depleted power module 4 Position the new power module over the connections and insert on to the main board The banana plug connector end of the l2. eads will come loose from the new power module 5 Remove the clips from the WP2 WP3 Backup Power Terminals 6 Tighten the four self tapping screws to a torque of 0 282 N m 2 5 Ibf in to ensure that the power module is secured properly 7 Close the cover and tighten the instrument cover screws to a torque of 5 6 to 6 7 N m 50 to 60 Ibf in ay nse EMERSON www Fisher com 4310 4320 Wireless Position Monitor Instruction Manual Supplement April 2014 D103856X012 Figure 1 Hot Swap ATTACH CLIPS TO WP2 WP3 BACKUP POWER TERMINALS TEST LEADS WITH BANANAPLUG CONNECTORS AND MICRO PLUNGER CLIPS ATTACH BANANA PLUG CONNECTORS 5 TO NEW POWER anne MODULE ASSEMBLY Figure 2 Wireless Position Monitor with Battery Sourced Power Modules SELF TAPPING SCREWS 4 X0558 GES2425_A COVER SCREWS X0552 Neither Emerson Emerson Process Management nor any of their affiliated entities assumes responsibility for the selection use or maintenance of any product Responsibility for proper selection use and maintenance of any product remains solely with the purchaser and end user Fisher and TopWorx are marks owned by one of the companies in the Emerson Process Management business unit of Emerson Electric Co Emerson Process Management Emerson and the Emerson logo are trademarks and service marks of Emerson Electric Co All other marks are the property of their respective owners The contents of this pub
3. lication are presented for informational purposes only and while every effort has been made to ensure their accuracy they are not to be construed as warranties or guarantees express or implied regarding the products or services described herein or their use or applicability All sales are governed by our terms and conditions which are available upon request We reserve the right to modify or improve the designs or specifications of such products at any time without notice Emerson Process Management Marshalltown lowa 50158 USA Sorocaba 18087 Brazil Chatham Kent ME4 4QZ UK A Dubai United Arab Emirates Singapore 128461 Singapore cwwweFishercom oo O EMERSON Process Management 2014 Fisher Controls International LLC All rights reserved
Download Pdf Manuals
Related Search