Emerson EWV401A Owner's Manual
Contents
1. Normal recording OTR 7 30 TIMER RECORDING You may set the VCR to start recording while you are away You can set seven programs to record on specific days daily or weekly within a 1 year period 1 Insert a tape with its safety tab into the VCR 2 Select main menu by pressing MENU 3 Select TIMER PROGRAMMING by pressing PLAY or STOP Then press F FWD e If you have not yet set the clock CLOCK SET appears If so follow the steps 3 and 4 in CLOCK SET UP section Then set the timer recording 4 Set the timer Set the program number 1 7 PROGRAM NUMBERS 4 4 Program number which is not set up flashes START TINE oe eee Press PLAY or STOP repeatedly for the CHANNEL T zZ desired program number Then press F FWD SPFFP lt Select once daily or weekly recording For once Press PLAY or STOP to point to ONCE a For daily Monday Friday Press PLAY or S ASIA to point to DAILY PROGRAM NUMBER 4 iii or a Press PLAY or STOP to point to PN EE WEEKL WEEKLY O gt Then End F FWD up o cate eee a Set the date First press PLAY or STOP for the month Then press F FWD tarro er E E Set the start time First press PLAY or STOP for the hour Then press F FWD Next press PLAY or STOP for the minute Then press F FWD And then press PLAY or STOP for AM or PM Then press F FWD Set the end time Follow the i2. Emerson OWNER S MANUAL If you need additional operating assistance after reading this owner s manual or to order replacement accessories please call TOLL FREE 1 800 256 2487 RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The caution marking is located on the rear of the cabinet VIDEO CASSETTE RECORDER EWV401A EMERSON AND THE G CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSON RADIO CORP PARSIPPANY NEW JERSEY U S A a U S registered mark The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of suffi cient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of impor tant operating and maintenance servicing instruc tions in the literature accompanying the product IMPORTANT SAFEGUARDS 1 Read Instructions All the safety and operating instructions should be read before the appliance is operated 2 Retain Instructions The safety and operating instructions should be retained for future reference 3 Heed Warnings All warnings on the appliance and in the operating instructions should be adhered
3. LLI S lt Lu E zZ lt Nags itlelele S5 WARRANTY EN ESPANOL PRECAUTIONS INSTALL LOCATION For safety and optimum performance of your VCR e Install the VCR in a horizontal and stable position Do not place anything directly on top of the VCR Do not place the VCR directly on top of the TV e Shield it from direct sunlight and keep it away from sources of intense heat Avoid dusty or humid places Avoid places with insufficient ventilation for proper 16 15 1413 12 11 10 9 8 7 heat dissipation Do not block the ventilation holes on the sides of the VCR Avoid locations subject to DESCRIPTION OF CONTROLS Front Panel 1 Cassette Compartment 9 CHANNEL A V buttons strong vibration or strong magnetic fields A il paren i le a button Display Window m AVOID THE HAZARDS OF i a 12 A Sensor gt TI ELECTRICAL SHOCK AND FIRE 6 PAUSE STILL button a ER Cepal a Do not handle the power cord with wet hands 7 MENU button 15 AUDIO nr A Do not pull on the power cord when disconnecting it 8 REC OTR button 18 VIDEO pue et oe from AC wall outlet Grasp it by the plug E If by accident water is spilled on your VCR unplug POWER VOR AEN men nes 3 Q the power cord immediately and take the unit to our 343 Authorized Service Center for servicing Oa Do not put your fingers or objects into the VCR 17 18 19 20 21 aZ cassette holder 17 POWER indicator
4. 18 VCR TV indicator 19 TAPE IN indicator Rear Panel 22 23 2425 20 TIMER indicator MOISTURE CONDENSATION WARNING 21 REC indicator Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or after heating a cold room or under conditions of high humidity Do not use the VCR at least for 2 hours until its inside is dry FCC WARNING i This equipment may generate or use radio frequency energy Changes or modifications to this equipment may cause harmful interference unless the modifications are i expressly approved in the instruction manual The user could lose the authority to operate this equipment if an unauthorized change or modification is made IMPORTANT COPYRIGHT INFORMATION 000000000 Y O0UIOIONI E 26 2728 29 22 AC Power Cord 26 VIDEO OUT jack 23 AUDIO OUT jack 27 VIDEO IN jack 24 AUDIO IN jack 28 CH3 CH4 selector switch Unauthorized recording or use of broadcast television 25 ANT IN jack 29 ANT OUT jack programming video tape film or other copyrighted material may violate applicable copyright laws We assume no responsibility for the unauthorized duplication use or other 1 POWER button acts which infringe upon the rights of copyright owners 2 NUMBER buttons A NOTE ABOUT RECYCLING les wee LAY on This product s packaging materials are recyclable 16 5 SLOW button and can be reused Please dispose of any materials 15 6 REW button i
5. FOR USE SETTING THE CH3 CH4 SWITCH If your TV does not have A V terminals When the VCR is in the Playback mode or when the VCR is in the VCR mode your TV will receive signals from the VCR on either channel 3 or 4 To use the VCR with your TV set the selector switch to CH3 or CH4 which is located in the back of TEN Back of the VCR SETUP Beale your VCR whichever is not used for normal broadcasts in your area Then set your TV to the same channel ni t CH4 SETUP AUTOMATIC CHANNEL SET UP You can automatically program the tuner to scan only the channels you receive in your area e Channel memory programming is NOT needed when you connected the VCR to a cable box or satellite box as in Connect VCR to TV In this case select the VCR and TV to channel 3 or 4 the same channel as the CH3 or CH4 switch on the back of the VCR Then the channel you want to record or view may be selected at the cable box or satellite box e Follow the steps below once Repeat it only if there is a power failure or if the VCR is unplugged for more than 30 seconds In these cases the programmed channels are erased e You must follow the steps below before attempting to play or record a video tape If you want to play or record a video tape BEFORE programming the tuner you can cancel it by pressing EXIT RESET 1 You need to connect the antenna or cable to the VCR first Then connect the VCR power plug into a standar
6. Select CLOCK SET by pressing PLAY or STOP Then press F FWD 3 Set the clock Set the month Press PLAY or SOL repeatedly Then press F FWD Press PLAY or da Then press F FWD Press PLAY or STOP repeatedly Then press F FWD The day of the week will appear automatically Press PLAY or STOP repeatedly Then press F FWD Press PLAY or STOP repeatedly Then press F FWD Press PLAY or STOP repeatedly Set the AM or PM CLOCK SET MONTH DAY YEAR 03 18 MON 2002 HOUR MINUTE AM PM 05 40 PM AM e To go back one step press REW 4 Start the clock by pressing EXIT RESET or FE FWD PLAYBACK FUNCTION NORMAL PLAYBACK 1 Insert the prerecorded tape The VCR will turn on If the safety tab has been removed the VCR will start CMD playback automatically 2 Turn on the TV and set the TV to channel 3 or 4 Now set the CH3 CH4 switch on the back of the VCR to match the channel selected on the TV 3 Begin playback by pressing PLAY e Tracking adjustment will be set automatically Digital Tracking function when you start eC To adjust the tracking manually press CHANNEL A V on the VCR e When a tape has reached the end the VCR will rewind the tape to the beginning eject the tape and turn off the VCR automatically e S VHS Quasi Playback SQPB This unit allows you to view a tape recorded in S VHS format Noise lines may appear on the p
7. appliance and cart combination to overturn 9 Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the video product and to protect it from overheating and these openings must not be blocked or covered The openings should never be blocked by placing the video product on a bed soia rug or other similar surface This video product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to 10 Power Sources This video product should be o pe of power source indicated on the marking la of the type of power ep to your home consult your appliance dealer or local power company For products intended to operate from battery power or other sources refer to the operating instructions 11 Grounding or Polarization This video product is equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a Safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug 12 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items place
8. line surges 15 Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing an outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal 16 Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock 17 Object and Liquid Entry Never push objects of any kind into this video product through any openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the video product 18 Servicing Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to qualified service personnel 19 Damage Requiring Service Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions a When the power supply cord or plug is damaged b If liquid has been spilled or objects have fallen into the video product c If the video product has been exposed to rain or water d If the video product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operatin
9. to 4 Follow Instructions All operating and use instructions should be followed 5 Cleaning Unplug this video product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for ae EXCEPTION A product that is meant for uninterrupted service and that for some specific reason such as the possibility of the loss of an authorization code for a CATV converter is not intended to be unplugged by the user for cleaning or any other purpose may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5 6 Attachments Do not use attachments not recommended by the video product manufacturer as they may cause hazards 7 Water and Moisture Do not use this video product near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like 8 Accessories Do not place this video product on an unstable cart stand tripod bracket or table The video product may fall causing serious inju appliance Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the video product Any mounting of the oa should follow the manufacturer s instructions and snould use a mounting accessory recommended by the manufacturer An appliance and cart combination should be moved with care 3125 Quick stops excessive force and uneven surfaces may cause the
10. JECT on the VCR TO CHECK CORRECT OR CANCEL AN AUTOMATIC TIMER PROGRAM 1 Turn the power on by pressing POWER 2 Select main menu by pressing MENU 3 Select TIMER PROGRAMMING by pressing PLAY or STOP Then press F FWD 4 Select the program number which you want to check by pressing PLAY or STOP The details of the selected program appears on the TV screen e Go to the digit you want to change by pressing F FWD or REW Then enter correct numbers by pressing PLAY or STOP e You may cancel the entire program by pressing REW during the program number flashes 5 Press EXIT RESET to exit 6 Press POWER to return to timer stand by mode COUNTER MEMORY FUNCTION Use this feature to memorize the beginning of recording start point 1 Press COUNTER RESET on the remote control to reset the counter 2 Press COUNTER MEMORY on the remote control so that M appears on the TV screen 3 Record the program 4 After recording press STOP then REW e When 0 00 00 is reached rewinding operation goes to stop And you can view the recording program e COUNTER MEMORY does not function if the Auto repeat mode is set to ON In this case set the Auto repeat mode to OFF e To cancel the Counter memory mode press COUNTER MEMORY so that M disappears from the TV screen SPECIAL FEATURES COPYING A VIDEO TAPE You can make copies of video tapes made by friends or relat
11. NA351UD Batteries AA x 2 2 Situate VCR Place the VCR in a stable horizontal surface 3 Connect VCR to TV VCR to TV Connection 1 Disconnect the AC power cord of the TV from the AC outlet Disconnect the antenna or cable from the TV Connect the antenna or cable to the ANT IN jack of the VCR Connect the VCR to the TV using the coaxial cable Plug the AC power cords of the VCR and TV into the AC outlets 0 A O N VHF UHF Back of the VCR combination a SSS Indoor antenna Back of the UHF VHF combination TV Coaxial cabl supplied cal 3 UHF VHF o gt ye From Cable or Satellite Company VCR to AV TV connection using AUDIO VIDEO Cables Using Optional AUDIO VIDEO Output Jacks With this connection you can get better pictures and sounds when playing back a tape if your TV has A V Input jacks Please refer to your TV s owner s manual Using AUDIO VIDEO Input Jacks You can use the A V input jacks on the front or the back of the VCR e To use the input jacks on the back of the VCR select L1 position by o 0 0 1 on the remote control or CHANNEL A V e To use the input jacks on the front of the VCR select L2 position by ape 0 0 2 on the remote control or CHANNEL A V L1 or L2 is found Playing VCR before the lowest memorized channel Example CH2 Audio Video cables not supplied
12. NESS FOR A PARTICULAR PURPOSE THAT ARE HEREBY DISCLAIMED BY FUNAI CORPORATION AND ITS REPRESENTATIVES OR AGENTS IN THE UNITED STATES ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED CENTER THIS WARRANTY IS VALID WHEN THE PRODUCT IS DELIVERED PREPAID TO A FUNAI AUTHORIZED SERVICE FACILITY IMPORTANT THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE IF AT ANY TIME DURING THE WARRANTY PERIOD YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE EXCHANGE OR REPAIR OF THIS PRODUCT PLEASE CONTACT FUNAI CORPORATION ATTENTION FUNAI CORPORATION RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE l l For information about your product or for information on how to exchange or repair your product telephone or write to the following FUNAI CORPORATION Customer Service 100 North Street Teterboro NJ 07608 Telephone 800 256 2487 PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS 0VMNO2846 HB3JOUD AAA Ak
13. P Then press F FWD 3 Select AUTO SET UP py ressing PLAY or STOP Then press F F DI After scanning the tuner stops on the lowest memorized channel TO ADD DELETE CHANNELS When the VCR automatically program the tuner to scan only the channels you receive in your area some channels may be skipped due to weak signal You can manually add the channel in the VCR memory 1 Press MENU until the main menu appears 2 Select CHANNEL SET UP by pressing a or STOP Then press F FWD 3 Select MANUAL SET UP by pressing PLAY or STOP Then press F FWD 4 Enter the desired channel number by pressing PLAY or STOP 5 Add or Delete it from memory by pressing F FWD or REW so that ADD or DELETE flashes on the TV screen accordingly 6 Exit the Preset mode by pressing EXIT RESET MENU TIMER PROGRAMMING p OFE AUTO R gt CHANNEL SETU CLOCK SET LANGUAGE SELECT TO CHANGE THE ON SCREEN LANGUAGE 1 Press MENU until the main menu appears 2 Select LANGUAGE SELECT by pressing PLAY or STOP Then press F FWD 3 Select ENGLISH or ESPA OL by pressing PLAY or STOP Then press EXIT RESET CLOCK SET UP Set the clock accurately for proper automatic timer recording We suggest that you use a TV or radio station as your time source 1 Select main menu by pressing MENU If the clock is not set the CLOCK SET menu appears first In this case follow step 3 2
14. d AC outlet 2 Turn on the TV and set the TV to channel 3 or 4 Now set the CH3 CH4 switch on the back of the VCR to match the channel selected on the TV 3 Turn on the VCR by pressing POWER It comes on that both the POWER and the VCR TV indicator LANGUEGE SELECT 4 Select the On Screen Language ENGLISH or ESPANOL by pressing PLAY or STOP Then press FFWD b gt ENGLISH ESPANOL ON 5 Begin channel preset by pressing F FWD once The tuner scans and memorizes all active channels in your area e The VCR distinguishes between standard TV channels and cable channels CH 01 AUTO SET UP 6 After scanning the tuner stops on the lowest memorized channel The TV screen returns to TV mode e lf AUTO SET UP appears on the TV screen again check the cable connections Press F FWD once again and the VCR will begin preset again TO SELECT A DESIRED CHANNEL You can select the desired channel by using CHANNEL A V or directly pressing Number on the remote control Note for using the Number buttons e When selecting cable channels which are higher than 99 press 100 first then press the last two digits e You must precede single digit channel numbers with a zero For example 02 03 04 and so on EN NOILONNA dNLas y gt lt u gt 2 A TO PRESET THE CHANNEL AGAIN 1 Press MENU until the main menu appears 2 Select CHANNEL SET UP by pressing PLAY or STO
15. d upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the appliance 13 Outdoor Antenna Grounding If an outside antenna or cable system is connected to the video product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA No 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode Fig A rated only from the If you are not sure to a child or adult and serious damage to the porraste cart WARNING Symbol provided by RETAC FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA y ANTENNA DISCHARGE UNIT NEC SECTION 810 20 GROUNDING CONDUCTORS NEC SECTION 810 21 GROUND CLAMP POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H 14 Lightning For added protection for this video product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the video product due to lightning and power
16. damente PLAY o STOP Luego pulse F FWD Ajuste el a o Ajuste la ora Ajuste el minuto Ajuste la Pulse repetidamente PLAY o ma ana AM o STOP AJUSTE DE RELOJ la tarde PM MES DIA A O 03 18 LUN 2002 HORA MINUTO AN BM 05 40 PM AM e Para volver atr s un paso pulse REW dis 4 Pulse EXIT RESET o F FWD para poner en funcionamiento el reloj O Emerson LIMITED WARRANTY Funai Corporation will exchange or repair this product at its option in the event of defect in materials or workmanship as follows EXCHANGE DURATION 1 90 DAYS FUNAI CORPORATION will exchange for a new unit without charge for a period of ninety 90 days from the date of original retail purchase 91 365 DAYS FUNAI CORPORATION will exchange for a factory service to new condition unit for a charge of 49 00 for the period of ninety one 91 days to three hundred sixty five 365 days from the date of Original retail purchase REPAIR DURATION LABOR FUNAI CORPORATION will provide the labor without charge for a period of ninety 90 days from the date of original retail purchase PARTS FUNAI CORPORATION will provide parts to replace defective parts without charge for a period of one 1 year from the date of original retail purchase Two 2 years for Picture Tube Certain parts are excluded from this warranty LIMITS AND EXCLUSIONS This warranty is extended only to the original retail purchaser A purchase receip
17. etter picture by pressing CHANNEL A V on the VCR Cannot view a tape but the e Head cleaning may be necessary Refer to AUTO HEAD CLEANING audio is OK e Make sure the VCR is not in the Menu mode No or poor playback picture e Select channel 3 or 4 at your TV then press VCR TV so that the VCR TV indicator on the VCR comes on e Fine tune your TV TV ade aie cannot be seen Re check the ANT IN and ANT OUT connections See page 3 normally e Press VCR TV so that the VCR TV indicator on the VCR disappears No VCR operation from the e Make sure the power plug is connected to an AC outlet Video or color fades in and out You cannot copy a copyrighted video tape You are experiencing copy guard protection when making a copy of a video tape SPECIFICATIONS Operating temperature 5 C 40 C 41 F 104 F Power requirement 120V 60Hz Converter output VHF Channel 3 or 4 Power consumption 14 Watts Dimensions W 14 1 4 360mm H 3 5 8 92mm D 8 1 2 216mm Weight 4 4 lbs 2 0 Kg approx e Designs and specifications are subject to change without notice and legal obligation e If there is a discrepancy between languages the default language will be English MAINTENANCE FEATURES SERVICING AUTO HEAD CLEANING a Should your VCR become inoperative do not try to correct the Automatically cleans video heads as you insert or remove a Q problem by yourself There are no user serviceable
18. g instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation e If the video product has been dropped or damaged in any way f When the video product exhibits a distinct change in performance this indicates a need for service 20 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards 21 Safety Check Upon completion of any service or repairs to this video product ask the service technician to perform safety checks to determine that the video product is in proper operating condition 22 Heat This video product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat NEC NATIONAL ELECTRICAL CODE S2898A As an ENERGY STAR Partner our company has determined that this product meets the ENERGY STAR guidelines for energy efficiency ENERGY STAR is VHS IMPORTANT 102 O AL lt O LL LL lt YN OF CONTROLS FOR USE ANA FUNCTION Hteo Ly Q TROUBLESHOOTING MOE RECORDING 49 1 4 70 4 SETUP Adi NT le DESCRIPTION Md 07 ple SPECIFICATIONS
19. i n por cable deber estar conectada NOTA Cuando utilice su nueva videograbadora por primera vez o en el caso de ser necesario despu s de producirse un fallo en la alimentaci n la videograbadora se pondr inicialmente en el modo de preajuste cuando se pulse POWER 3 1 Encienda el televisor y ponga el televisor en el canal 3 PREPARACI N DEL RELOJ 1 Pulse MENU hasta que aparezca el men principal Si el reloj no est puesto en hora y se pulsa MENU el men AJUSTE DE RELOJ aparece en primer lugar En este caso siga el paso 3 2 Pulse PLAY o STOP para indicar a AJUSTE DE RELOJ Luego pulse F FWD Pulse repetidamente PLAY o STOP Luego pulse F FWD Ajuste el mes 4 Pulse una vez F FWD 4 Ahora ponga el conmutador de la parte trasera de la videograbadora para que concuerde con el canal seleccionado en el televisor 2 Pulse POWER para encender la videograbadora 3 Seleccione ENGLISH o ESPANOL Spanish pulsando PLAY o STOP Y luego pulse F FWD SELEC IDIOMA ENGLISH gt ESPA OL ON El sintonizador explora y memoriza todos los canales activos de su zona Tras la exploraci n el sintonizador se detiene en el canal memorizado m s bajo Ajuste el d a Pulse repetidamente PLAY o STOP Luego pulse F FWD Pulse repetidamente PLAY o STOP Luego pulse F FWD Pulse repetidamente PLAY o STOP Luego pulse F FWD Pulse repeti
20. icture 4 To stop playback press STOP STILL SLOW You can freeze the picture on TV screen by pressing PAUSE STILL during playback e You can advance the picture by one frame at a time by pressing PAUSE STILL during the still mode e If the picture begins to vibrate vertically during the still mode stabilize the picture by pressing CHANNEL A V e If the picture is distorted or rolling vertically adjust the vertical hold control on your TV if equipped You can see the slow motion by pressing SLOW during playback or the still mode e If the noise bar appears on the TV screen you can reduce it by pressing CHANNEL A V e After the VCR has been in Still Slow mode for 5 minutes it will stop automatically to protect the tape and the video head from damage e To return playback press PLAY AUTO REPEAT PLAYBACK This feature allows you to play a tape over and over 1 Select main menu by pressing MENU 2 Select AUTO REPEAT by pressing PLAY or STOP 3 Begin auto repeat playback by pressing F FWD so that ON appears next to AUTO REPEAT e If the on screen menu still remains press EXIT RESET exit the menu e To cancel the Auto repeat mode press F FWD at step 3 so that OFF appears next to AUTO REPEAT e When you set the Auto repeat mode to ON while the Counter memory mode is ON the VCR will exit the Counter memory mode automatically SEARCH FUNCTIONS PICTURE SEARCH If y
21. ives for your enjoyment Warning Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws Connect the recording VCR this unit the playing VCR another source and your TV using the following diagram Audio Video cables not supplied Recording VCR Use for monitoring this unit Coaxial cable supplied Playing VCR y E another source 1 Insert a pre recorded tape into the playing VCR 2 Insert a tape with its safety tab into the recording VCR 3 Press TAPE SPEED on the recording VCR to select the desired recording speed SP SLP 4 Select the L1 or L2 position on the recording VCR See page 3 under Using AUDIO VIDEO Input jacks 5 Press REC OTR on the recording VCR 6 Begin playback of the tape in the playing VCR e For best results during dubbing use the VCR s front panel controls whenever possible The remote control might affect the playing VCR s operation e Always use video quality shielded cables with RCA type connectors Standard audio cables are not recommended e You can use a video disc player satellite receiver or other audio video component with A V outputs in place of the playing VCR TO MONITOR THE RECORDING 1 Turn on the TV and set the TV to channel 3 or 4 Now set the CH3 CH4 switch on the back of the VCR to match the channel selected on the TV 2 Press VCR TV on the recording VCR so that the VCR TV indicator come
22. n accordance with your local recycling regulations 2 7 STOP button Batteries should never be thrown away or incinerated 8 RECORD button but disposed of in accordance with your local 3 He 9 PAUSE STILL button regulations concerning chemical wastes 4 o e S 19 10 FFWD button Note to the Cable TV System Installer 5 pa 11 11 PLAY button This reminder is provided to call the Cable TV system pal ER a 12 COUNTER MEMORY button installer s attention to Article 820 40 of the National a D 23410 43 EXIT RESET button Electrical Code which provides guidelines for proper RECORD STOP PAUSESTIL 14 SEARCH MODE button grounding in particular specifying that the cable ground 8 gt E 9 15 CHANNEL V buttons shall be connected to the grounding system of the building as close to the point of cable entry as possible CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT ATTENTION POUR EVITER LES CHOC ELECTRIQUES INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND 16 VCR TV button 17 EJECT button Install two AA batteries matching the polarity indicated inside the battery compartment PREPARATION FOR USE 1 Check contents Make sure the ackage contains all of the accessories listed in as below SUPPLIED ACCESSORIES ACCESSORIES PART NO Coaxial Cable WPZ0901TMO002 Remote Control Unit NA301UD
23. nstructions of Set the start time to set the end time Set the channel number Press PLAY or STOP repeatedly for the desired channel number Then press F FWD If you connected the VCR to a cable box or satellite box as in Connect VCR to TV on page 3 select the VCR to channel 3 or 4 the same channel as the CH3 or CH4 switch on the back of the VCR Then select the channel you want to record at the cable box or satellite box Leave the cable box or satellite box on for timer recording Set the EBE sposi Press PLAY or STOP repeatedly for the desired tape speed Then press F FWD REC SPEEB Sp oP SLP e To go back one step press REW 5 To set another program repeat step 4 To exit press EXIT RESET 6 Press POWER to set the timer The TIMER indicator on the VCR comes on EN Sele gp v e NOLLONNA D SELA ONIGHOOsSY HINTS FOR TIMER RECORDING e If there is a power failure or the VCR is unplugged for more than 30 seconds the clock setting and all timer settings will be lost e If the tape runs out before the end time the VCR will switch to the Stop mode immediately eject the tape and the VCR power will be turned off The TIMER indicator will flash e If a tape is not in the VCR or does not have the safety tab the TIMER indicator flashes and timer recording cannot be performed Please insert a recordable tape TO STOP AN AUTOMATIC TIMER PROGRAM ALREADY STARTED Press STOP E
24. ograbadora televisor 2 Botones de n mero NUMBER 3 Bot n de rebobinado 19 Indicador de videocasete introducido 3 Bot n de men s MENU 4 Bot n de reproducci n 20 Indicador del temporizador 4 Bot n de visualizador DISPLAY 5 Bot n de avance r pido 21 Indicador de grabaci n 5 Bot n de c mara lenta SLOW 6 Bot n de pausa imagen fija 6 Bot n de rebobinado REW 7 Bot n de men s 7 Bot n de parada STOP 8 Bot n de grabaci n con un toque 22 Cable de alimentaci n 8 Bot n de grabaci n RECORD 9 Botones de selecci n de canales 23 Terminal de salida de audio 9 Bot n de pausa imagen fija PAUSE STILL 10 Bot n de la velocidad de cinta 24 Terminal de entrada de audio 10 Bot n de avance r pido F FWD 11 Indicadores 25 Terminal de entrada de antena 11 Bot n de reproducci n PLAY 12 Sensor de control remoto 26 Terminal de salida de v deo 12 Bot n de memoria del contador COUNTER MEMORY 13 Bot n de videograbadora televisor 27 Terminal de entrada de v deo 13 Bot n de salida reposici n EXIT RESET 14 Bot n de la alimentaci n 28 Conmutador selector de canales 14 Bot n del modo de b squeda SEARCH MODE 15 Terminal de entrada de audio CH3 CH4 15 Botones de selecci n de canales CHANNEL 16 Terminal de entrada de v de 29 Terminal de salida de antena 16 Bot n de videograbadora televisor VCR TV 17 Bot n de expulsi n EJECT PREPARACI N DE CANALES La antena o la caja de televis
25. ou want to skip or repeat a scene during playback press F FWD or REW e Press it again and the VCR will now search in super high speed in the LP SLP modes only EN INDEX SEARCH The index signal is recorded on the tape automatically when the recording is started If you want to view a recording at a specific start point it can easily be done 1 Press SEARCH MODE so that the Index Search menu appears 2 Enter your desired number by pressing PLAY or STOP within 30 seconds 3 Press F FWD or REW to start index search If you want to go in the forward direction press F FWD If you want to go in the reverse direction press REW e After index search the VCR will play the tape automatically INDEX SEARCH 03 TIME SEARCH This feature allows you to fast forward or rewind the tape for a desired length of time 1 Press SEARCH MODE so that the Time Search menu appears 2 Enter your desired time to skip by pressing PLAY or STOP ME within 30 seconds A 3 Press F FWD or REW to start time search If you want to go in the forward direction press F FWD If you want to go in the reverse direction press REW e After time search the VCR will play the tape automatically RECORDING FUNCTION It may be unlawful to record playback copyrighted material without the consent of the copyright owner Accidental erasure prevention To prevent accidental recording on a CD recorded cassette
26. parts cassette so you can see a clear picture 3 inside Turn off unplug the power plug and please call our e Playback picture may become blurred or interrupted while the help line at TV program reception is clear Dirt accumulated on the video 1 800 256 2487 heads after long periods of use or the usage of rental or i worn tapes can cause this problem If a streaky or snowy to locate an Authorized Service Center picture appears during playback the video heads in your VCR may need to be cleaned esca tada teri i f the VCR 1 Please visit your local Audio Video store and purchase a A o good quality VHS Video Head Cleaner with a soft cloth immersed in lukewarm water and wrung dry e Never use a solvent or alcohol Do not spray insecticide liquid 2 lf a Video Head Cleaner does not solve the problem please 401 07 11 01 EY TROUBLESHOOTING HO NE Lu O lt Lu E lt near the VCR Such chemicals may cause damage and call our help line at 1 800 256 2487 to locate an Authorized discoloration to the exposed surfaces Service Center NOTES Remember to read the instructions included with the video head cleaner before use e Clean video heads only when problems occur e Foroyate FR ALNVGEVM TONVdS4 NA CONTROLES DE FUNCIONAMIENTO Y FUNCIONES 1 Compartimiento del videocasete 17 Indicador de alimentacion 1 Bot n de la alimentaci n POWER 2 Bot n de parada expulsi n 18 Indicador de vide
27. remove its record safety tab To record on it later cover the hole with cellophane tape Record safety tab Before recording make sure e The desired channel is selected by pressing Number on the remote control or the CHANNEL A v If you connected the VCR to a cable box or satellite box as in VCR to TV connections on page 3 select the VCR to channel 3 or 4 the same channel as the CH3 or CH4 switch on the back of the VCR Then select the channel you want to record at the cable box or satellite box In this case you can ONLY record and view the SAME channel e There is a tape with its safety tab into the VCR e The desired recording speed is selected in SP standard play or SLP super long play mode by pressing TAPE SPEED on the VCR Tape Speed Recording Playback Time T120 T160 2 2 3hours SLPmod VIEWING AND RECORDING THE SAME PROGRAM 1 Begin the recording by pressing RECORD e To temporarily stop recording or resume it press PAUSE STILL After the VCR has been in Pause mode for 5 minutes it will stop automatically to protect the tape and the video head from damage 2 Press STOP when recording is completed OTR One Touch Recording This feature allows you to set the recording length simply by pressing REC OTR on the VCR 1 Begin OTR by pressing REC OTR on the VCR repeatedly until the desired recording length appears REC gt OTR 0 30 gt OTR 1 00
28. s on AUTO REWIND When a tape has reached the end during recording playback or fast forward the tape will automatically rewind to the beginning After rewinding finishes the VCR will eject the tape and turn itself to off e The VCR will not rewind the tape automatically during timer recording or One Touch Recording e When the Counter Memory is activated the tape will rewind to the MO 00 00 and the VCR will go into the Stop mode REAL TIME TAPE COUNTER e This shows the elapsed recording or playback time in hours minutes and seconds The displayed time will not change during blank portions on the tape e The indication will appear when the tape is rewound further than 0 00 00 on the tape counter EN TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your VCR locate the PROBLEM in the left column below Check the corresponding CORRECTIVE ACTION column to remedy the problem PROBLEM CORRECTIVE ACTION No power e Make sure the power plug is connected to an AC outlet e Make sure the power is turned on Timer recording is impossible Make sure the timer recording is set correctly e Make sure the power is off e Make sure the VCR clock is set correctly Cannot go into Record mode Make sure the tape has a safety tab If needed cover the hole with cellophane tape Playback picture is partially noisy Adjust tracking control for a b
29. t or other proof of original retail purchase will be required together with the product to obtain exchange or service under this warranty This warranty shall not be extended to any other person or transferee This warranty is void and of no effect if any serial numbers on the product are altered replaced defaced or missing This EMERSON Limited warranty applies only to product purchased and used in the United States This warranty only covers failures due to defects in material or workmanship which occur during normal use It does not cover damage which occurs in shipment or failures which are caused by repairs alterations or parts not supplied by FUNAI CORPORATION or damage which results from accident misuse abuse mishandling misapplication alteration faulty installation improper maintenance commercial use such as hotel rental or office use of this product or damage which results from fire flood lightning or other acts of God Printed in China THIS WARRANTY DOES NOT COVER PACKING MATERIALS ANY ACCESSORIES EXCEPT REMOTE CONTROL UNITS ANY COSMETIC PARTS COMPLETE ASSEMBLY PARTS DEMONSTRATION OR FLOOR MODELS FUNAI CORPORATION AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANT ABILITY AND FIT
Download Pdf Manuals
Related Search