Emerson Edco MGB Ground Rail Brochures and Data Sheets
Contents
1. Edco MGBW LUG Ground Rail Fits Standard 66M1 50 Punch Down Blocks Split Block Variations Edco MGBW LUG Ground Rail Designed to fit standard 66M1 50 Punch Down Blocks allowing the Edco H Series COHP PB Series OPX and other similar Surge Suppressors to access ground when snapped onto a 66M1 50 Punch Down Block A Standard 66M1 50 block is capable of accommodating up to 25 Edco surge suppressors Application Diagram PROTECTED SIDE lt W __ UNPROTECTED SIDE 10 AWG wire to building approved ground recommended keep short When installing the Edco Grounding Rail with the Siemens 66M1 50CC Traditional Wiring Block the base of the grounding rail should be installed on the top of the bracket and nylon Metal washecand screw washer to be installed on bottom Nylon Washer Metal Washer When installing the Edco Grounding Rail with the Siemens 66 M1 50C New Category 5 Wiring Block the base of the grounding rail should be installed on the bottom of the bracket Metal Washer Metal washer and nut to MGBW LUG always located on Outside be installed on top Plant field side of punch block Emerson Network Power Contact information Surge Protection 100 Emerson Parkway Binghamton NY 13905 T 607 721 8840 T 800 288 6169 F 607 722 8713 E SurgeTech Emerson com Z DANGER Only qualified personnel should install or service this system Electrical safety pre cautio2. ns must be followed when installing or servicing this equipment To prevent risk of electrical shock turn off and lock out all power sources to the unit before making electrical connections or servicing Seulement le personnel qualifi doit installer ou maintenir ce syst me Des pr cautions de s curit en lectricit doivent tre suivis lors de l installation ou de la maintenance de cet equipement Pour eviter tout risque de choc lectrique d branchez et verouiller toutes les sources d alimentation de cet equipement avant de www EmersonNetworkPower com Surge EMERSON Ui ft oF IO 50112 5 14 Rev 3 Printed in USA Emerson Network Power the Emerson Network Power logo and Edco are trademarks and service marks of Emerson Electric Co 2014 Emerson Electric Co While every precaution has been taken to ensure accuracy and completeness herein Emerson Network Power Surge Protection assumes no responsibility and disclaims all liability for damages resulting from use of this information or for any errors or omissions Specifications are subject to change without notice
Download Pdf Manuals
Related Search