Echo X750-005 User's Manual
Contents
1. REVERSE ROTATION IB e This model is equipped with reverse rotation Counter mechanism clockwise CCW e When drilling set shift lever down to clockwise CW rotation position e If bit is locked due to deep penetration during drilling operation set shift lever up to counterclockwise CCW rotation position and operate reversed for easy pulling out Clockwise hift shift lever CW e When changing direction of drill rotation operate as follows Return engine to idle Engine shift lever to CW or CCW position with a slight acceleration of the throttle trigger To properly lock the gears in the gear case Do not operate shift lever forcibly when changing rotation direction AW WARNING NOTE WHEN THE DRILL CAN NOT PULL OUT Do not shift from forward to reverse or vice FROM THE WOOD DO NOT TRY TO PULL versa while the chuck is turning OUT THE DRILL BY FORCE Failure to do so may cause unit damage WHEN CHANGING THE BIT ENSURE TO Always release throttle and allow the unit to STOP THE ENGINE return to idle before shifting AFTER A JOB BIT AND GEAR CASING Do not stand close to drill or chuck with your MAY BE HEATED DO NOT TOUCH THEM body or clothes while operation WITH BARE HANDS When drilling ensure that no power cable or other obstacle exist MAINTENANCE AND CARE 44 WARNING Moving parts can amputate fingers or cause severe injuries Keep hands clothing and loose objects away from all openings2. Bes di Be Forro E eee erent eer E EN ee ee ee ere eer ere ee eee ere 1 SAPETI aeaiee E E E E E EEE R E E A E ee voedeuteee 2 OFERATING TECHNIQUE Daorsi aii er eee meee eee er er ere 5 DESORPTION aiea a e E E A EE ee E E 6 AO EME CIN Caters cece tet ea an EE E E EE EEE E A Ea E 7 OPERATION ornen a A E E E T 7 MAINTENANCE AND CARE imisi prsni ngakinga eee ee ee ea ee ea eee E 11 EME SON DATA merne E AE E E ee cee eee 12 fi 8 0 Noho s 6001 Speer ern tr rere ere tener reer eee eee ee ee eee 13 MAINTENANCE ee ee en eee eee ee ee ee ee eee 14 STORA E age sss eas te E ag ee emcee E oe oe necesatpeneesieueee ec ecea oot seercee 17 SPECIFICA BO ene eee en eee ee eee E eee a E E 18 WARRANTY STATEMENTS eee eee ee ee eee 19 Specifications descriptions and illustrative material in this literature are as accurate as known at the time of publication but are subject to change without notice Illustrations may include optional equipment and accessories and may not include all standard equipment Copyright 2002 YAMABIKO CORPORATION All Rights Reserved INTRODUCTION ECHO Engine Drill EDR 260 is a lightweight high performance two stroke engined unit designed for WARNING IMPROPER USE OR CARE OF THIS UNIT OR drilling j FAILURE TO WEAR PROPER PROTECTION This Manual provides the information necessary CAN RESULT IN SERIOUS INJURY for operation and maintenance READ AND UNDERSTAND THE RULES FOR SAFE OPERATION AND ALL INSTRUCTI
3. or its Authorized Service Representative OWNER S WARRANTY RESPONSIBILITIES As the equipment SORE owner you are responsible for the performance of the required maintenance listed in your Operator s Manual ECHO Inc recommends that you retain all receipts covering maintenance on your equipment SORE however ECHO Inc cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance As the equipment SORE owner you should be aware that ECHO Inc may deny you warranty coverage if your equipment SORE or a part has failed due to abuse neglect improper maintenance or unapproved modifications You are responsible for presenting your equipment SORE to an ECHO Inc authorized service representative as soon as a problem exists The warranty repairs should be completed in a reasonable amount of time not to exceed 30 days If a warrantable condition exists and there is no Authorized Dealer within 100 miles ECHO Inc will pay to ship the unit to the nearest authorized dealer If you have questions regarding your warranty coverage you should contact ECHO Inc at 1 800 673 1558 web site WWW ECHO USA COM or contact Shindaiwa at 1 877 986 7783 web site WWW SHINDAIWA COM WHAT DOES THIS WARRANTY COVER ECHO Inc warrants that your equipment SORE was designed built and equipped to conform with applicable EPA and C A R B emissions standards and that your equipment SORE is free from defects in mate
4. Always stop engine disconnect spark plug and make sure all moving parts have come to a complete stop before removing obstructions clearing debris or servicing unit Allow unit to cool before performing service Wear gloves to protect hands from sharp edges and hot surfaces 11 SKILL LEVELS Level 1 Easy to do Common tools may be required Level 2 Moderate difficulty Some specialized tools may be required MAINTENANCE PROCEDURE COMPONENT SYSTEM Spark Plug Cooling System Muffler Spark Arrestor Cylinder Exhaust Port Recoil Starter Rope Screws Nuts Bolts 1 DAILY OR BEFORE USE YEARLY 600 HOURS MAINTENANCE PROCEDURE LETTER CODES I INSPECT R REPLACE C CLEAN IMPORTANT NOTE Time intervals shown are maximum Actual use and your experience will determine the frequency of required maintenance MAINTENANCE PROCEDURE NOTES 1 Low evaporative fuel tanks DO NOT require regular maintenance to maintain emission integrity All recommendations to replace are based on the finding of damage or wear during inspection IMPORTANT Time intervals are maximum Actual use and your experience will determine the frequency of required maintenance Record dates of monthly and yearly inspections EMISSION DATA EMISSION CONTROL EXHAUST and EVAPORATIVE EPA 2010 and Later and or C A R B TIER Ill The emission control system for the engine is EM engine modifi cation and if the second to last char
5. is adjusted for operation above 1100 feet ASL the carburetor must be readjusted when operating the engine below 1100 feet ASL otherwise severe engine damage may result REPLACEMENT OF CHUCK Replacement of chuck should be done in the following manner 1 Remove bolt with hexagonal hole fixed in the driving axle 2 Insert accessory hexagonal bar Part Number 89541 2 20960 into chuck and fix 3 Fit19 mm spanner onto driving axle and keep it fitted 4 Fit 10mm box spanner onto the hexagonal bar and turn it into direction as indicated by an arrow to remove chuck 5 Fitanew chuck in the reversed order of removing ADJUSTING CARBURETOR As Required GENERAL INFORMATION The idle speed adjuster screw controls the throttle opening at the idle position IDLE ADJUSTMENT 1 Start engine and allow it to run at high idle until warm 2 Turnthe idle speed screw clockwise until drill bit begins to move 3 Turn idle screw counterclockwise 1 and 1 2 to 2 turn or until the drill bit stops 2700 to 3300 r min NOTE When there is some trouble with the carburetor contact your dealer Cylinder fins CLEANING CYLINDER FINS Check Periodically NOTE Clogged fins will cause poor engine cooling 1 Carefully remove housing and clean dirt and dust from fins 2 Reinstall housing CLEANING SILENCER AND EXHAUST PORT Check Periodically 1 Carefully remove housing halves 2 Remove and disasse
6. read a new one can be ordered from your ECHO dealer s NOOA Operator s manual Included with unit Read before operation and keep for future reference to learn proper safe operating techniques Throttle trigger Device activated by the operator s finger for controlling the engine speed Rear handle Handle located furthest from the drill bit Silencer cover Drill bit Not included with unit Chuck Front handle Handle located on the front gear Case Shift lever Part Number X505 002570 13 14 15 MECHO OPERATOR S MANUAL ENGINE DRILL EDR 260 amp WARNING 14 10 Fuel tank Contains fuel and fuel filter 10 11 12 Fuel tank cap For closing the fuel tank Air cleaner cover Covers air filter Starter handle Pull handle to start the engine Throttle trigger lockout Device that prevents the accidental operation of the throttle trigger until manually released Ignition switch Device for allowing the engine to be started and stopped Spark plug ASSEMBLING FRONT HANDLE e Insert the front handle to the machine and turn clockwise TIGHTEN THE SCREW FIRMLY To operate front handle with right hand remove right plug then reverse sides when installing handle and plug 45 k 19 S ae NL Ea DS ZS ON A CZ NES Al Washer Front handle DRILL BIT e Insert the drill bit not provide
7. unit e DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit e NEVER reach into any opening while the engine is running Moving parts may not be visible through openings 44 WARNING Check fuel system for leaks due to fuel tank damage especially if the unit is dropped If damage or leaks are found do not use unit otherwise serious personal injury or property damage may occur Have unit repaired by an authorized servicing dealer before using DECALS AND SYMBOLS Carefully read the operator s Wear eyes ears and head manual protection Beware of high temperature Finger severing areas SAFETY A WARNING ENGINE DRILL USERS RISK INJURY TO THEMSELVES AND OTHERS IF THE ENGINE DRILL IS USED IMPROPERLY AND OR SAFETY PRECAUTIONS ARE NOT FOLLOWED PROPER CLOTHING AND SAFETY GEAR MUST BE WORN WHEN OPERATING ENGINE DRILL A WARNING ALWAYS STOP THE ENGINE WHEN A DRILL JAM OCCURS DO NOT ATTEMPT TO REMOVE AN OBJECT CAUSING A DRILL JAM IF THE ENGINE IS RUNNING PHYSICAL INJURY CAN OCCUR IF A DRILL JAM IS REMOVED AND THE DRILLS START MOVING OPERATOR SAFETY e Read this Engine drill Operators Manual carefully Be sure you understand how to operate this unit properly before you use it e Be familiar with all the controls and the proper use of the machine e Wear proper clothing to protect legs and other exposed parts of your body e Wear non skid sole shoes Do not wear
8. AIN GOOD BLOOD CIRCULATION BY PERFORMING VIGOROUS ARM EXERCISES DURING FREQUENT WORK BREAKS AND ALSO BY NOT SMOKING LIMIT THE HOURS OF OPERATION TRY TO FILL EACH DAY WITH JOBS WHERE OPERATING THE ENGINE DRILL OR OTHER HAND HELD POWER EQUIPMENT IS NOT REQUIRED IF YOU EXPERIENCE DISCOMFORT REDNESS AND SWELLING OF THE FINGERS FOLLOWED BY WHITENING AND LOSS OF FEELING CONSULT YOUR PHYSICIAN BEFORE FURTHER EXPOSING YOURSELF TO COLD AND VIBRATION Repetitive Stress Injuries It is believed that over using the muscles and tendons of the fingers hands arms and shoulders may cause soreness swelling numbness weakness and extreme pain in those areas Certain repetitive hand activities may put you ata high risk for developing a Repetitive Stress Injury RSI An extreme RSI condition is Carpal Tunnel Syndrome CTS which could occur when your wrist swells and squeezes a vital nerve that runs through the area Some believe that prolonged exposure to vibration may contribute to CTS CTS can cause severe pain for months or even years To reduce the risk of RSI CTS do the following e Avoid using your wrist in a bent extended or twisted position Instead try to maintain a straight wrist position Also when grasping use your whole hand not just the thumb and index finger e Take periodic breaks to minimize repetition and rest your hands e Reduce the speed and force with which you do the repetitive movement e Do exer
9. Clogged filter will cause difficulty in starting engine or poor engine performances Pick up fuel filter through fuel inlet port with a piece of steel wire or the like When filter is dirty replace it Fuel tank cap Fuel filter CHECK FUEL SYSTEM e Check before every use e After refueling make sure fuel does not leak or exude from around fuel pipe fuel grommet or fuel tank cap e Incase of fuel leakage or exudation there is a danger of fire Stop using the machine immediately and request your dealer to inspect or replace SPARK PLUG e Check periodically The standard spark gap is 0 6 to 0 7 mm 0 024 to 0 028 in Correct spark gap if it is wider or narrower than the standard gap Ifthe electrodes are coated with carbon deposits replace with a new spark plug Do not sandblast to clean Remaining sand will damage engine e Fastening torque 15 to 17 N m 130 to 145 in Ib IMPORTANT Do not over tighten plug Box spanner 10 mm Spanner 19 mm Hexagonal bar Part Number 89541 2 20960 Idle speed adjustment screw High Altitude Operation This engine has been factory adjusted to maintain satisfactory starting emission and durability performance up to 1100 feet above sea level ASL 96 0 kPa To maintain proper engine operation and emission compliance above 1100 feet ASL the carburetor may need to be adjusted by an authorized ECHO service dealer IMPORTANT If the engine
10. ENTAL APPLICATION 90 DAYS WARRANTY e Units for rental use will be covered against defects in material and workmanship for a period of 90 days from the date of purchase ECHO s liability under the Lifetime coverage is limited to furnishing parts specified under the PRODUCT WARRANTY PERIOD section of this warranty statement for Life free of charge for a period of ten 10 years after the date of the complete unit s final production 19 PURCHASED REPAIR PARTS SHORT BLOCKS AND ACCESSORIES e 90 day residential or non income producing warranty e 30 day commercial institutional agricultural industrial income producing or rental application warranty ATTENTION TWO STROKE ENGINE POWER PRODUCT OWNERS This ECHO two stroke engine power product is a quality engineered unit which has been manufactured to exact tolerances to provide superior performance To help ensure the performance of the unit it is required to use two stroke oil which meets the ISO L EGD Standard per ISO CD 13738 and JASO M345FD Standards ECHO Power Blend Two Stroke Oil is a premium two stroke oil specifically formulated to meet ISO L EGD ISO CD 13738 and JASO M345FD Standards The use of two stroke oils designed for other applications such as for outboard motors or lawnmowers can result in severe engine damage and will void your two stroke engine limited warranty THIS WARRANTY DOES NOT COVER DAMAGE CAUSED BY e Lack of lubrication or engine failure due to t
11. ITED alcohol or 15 MTBE methyl tertiary butyl ether TO IMPROPER CLUTCH ENGAGEMENT Gasohol containing methyl wood alcohol is NOT ALTERNATIVE FUELS MAY ALSO CAUSE approved PREMATURE DETERIORATION OF FUEL LINES GASKETS CARBURETOR AND OTHER ENGINE COMPONENTS Two Stroke Oil A two stroke engine oil meeting ISO L EGD ISO CD 13738 and J A S O FC FD Standards must be used ECHO brand premium Power Blend X Universal 2 Stroke Oil meets these Fuel Mix Chart 50 1 standards Engine problems due to inadequate US MERG lubrication caused by failure to use an ISO L EGD ISO CD 13738 and J A S O FC FD certified oil Gasoline Qil Gasoline Qil such as ECHO premium Power Blend X will void US fl oz the two stroke engine warranty IMPORTANT e ECHO premium Power Blend X Universal 2 Stroke Oil may be mixed at 50 1 ratio for application in all ECHO engines sold in the past regardless of ratio specified in those manuals 1 2 6 4 80 2 oz 8 160 5 12 8 20 400 Use of unmixed improperly mixed or fuel older than 90 days stale fuel may cause hard starting poor performance or severe engine damage and void the product warranty Read and follow instructions in the Storage section of this manual HANDLING FUEL MIXING INSTRUCTIONS A DANGER 1 Fill an approved fuel container with half of the FUEL IS VERY FLAMMABLE USE EXTREME required amount of gasoline CARE WHEN MIXING STORING OR 9 HANDLING
12. MECHO OPERATOR S MANUAL ENGINE DRILL EDR 260 WARNING READ INSTRUCTIONS CAREFULLY AND FOLLOW RULES FOR SAFE OPERATION FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY ECHO INCORPORATED 400 Oakwood Road Lake Zurich Illinois 60047 1564 Phone 847 540 8400 X750 005 05 7 X750409 3607 Printed in Japan 1201 02Asb 1374 ES A WARNING A Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State of California to cause cancer birth defects or other reproductive harm Some examples of these chemicals are e Lead from lead based paints e Crystalline silica from bricks and cement and other masonry products and e Arsenic and chromium from chemically treated lumber Your risk from these exposures varies depending on how often you do this type of work To reduce your exposure to these chemicals work in a well ventilated area and work with approved safety equipment such as those dust masks that are specially designed to filter out microscopic particles A WARNING A The engine exhaust from this product contains chemicals known to the State of California to cause cancer birth defects or other reproductive harm CONTENTS Ts 23 CTIOD anoe e ree reer re ere E eee eee ee re er ree 1 SAFETY AND SPECIAL INFORMATION 0 0 00 ccccee cece cece ee eee eee eee eee eee eee seen ee ees aaa eee eeeaaaeeeseeaaaeees 1 BIS Oy ES
13. ONS IN THIS MANUAL SAFETY AND SPECIAL INFORMATION DANGER S CIRCLE AND SLASH SYMBOL The safety alert symbol accompanied by the This symbol means the specific action word DANGER calls attention to an act or shown is prohibited Ignoring these condition which WILL lead to serious prohibitions can result in serious or personal injury or death if not avoided fatal injury WARNING NOTE The safety alert symbol accompanied by the This sees danas o tips for use word WARNING calls attention to an act or care and maintenance of the unit condition which CAN lead to serious IMPORTANT personal injury or death if not avoided The enclosed message provides information necessary for the protection of the unit 44 CAUTION The safety alert symbol accompanied by the word CAUTION calls attention to an act or condition which may lead to minor or Throughout this manual and on the product itself you will find safety alters and helpful information messages preceded by symbols or key words The following is an explanation of those symbols and key words and what they mean to you moderate personal injury if not avoided 44 WARNING Moving parts can amputate fingers or cause severe injuries Keep hands clothing and loose objects away from all openings e ALWAYS stop engine disconnect spark plug and make sure all moving parts have come to a complete stop before removing obstructions clearing debris or servicing
14. OR SERIOUS PERSONAL INJURY MAY RESULT Add the proper amount of two stroke oil to gasoline Shoulder level USE AN APPROVED FUEL CONTAINER DO NOT SMOKE NEAR FUEL DO NOT ALLOW FLAMES OR SPARKS NEAR FUEL FUEL TANKS CANS MAY BE UNDER PRESSURE ALWAYS LOOSEN FUEL CAPS SLOWLY ALLOWING PRESSURE TO EQUALIZE NEVER REFUEL A UNIT WHEN THE ENGINE IS HOT NEVER REFUEL A UNIT WITH THE ENGINE RUNNING DO NOT FILL FUEL TANKS INDOORS ALWAYS FILL FUEL TANKS OUTDOORS OVER BARE GROUND DO NOT OVERFILL FUEL TANK IT IS NOT PERMITTED TO FILL FUEL ABOVE THE SHOULDER LEVEL OF FUEL TANK WIPE UP SPILLS IMMEDIATELY SECURELY TIGHTEN FUEL CAP AFTER REFUELING INSPECT FOR FUEL LEAKAGE IF FUEL LEAKAGE IS FOUND DO NOT START OR OPERATE UNIT UNTIL LEAKAGE IS REPAIRED MOVE AT LEAST 3 M 10 FEET FROM REFUELING LOCATION BEFORE STARTING THE ENGINE 3 Close container and shake to mix oil with gasoline 4 Add remaining gasoline close fuel container and remix IMPORTANT e Spilled fuel is a leading cause of hydrocarbon emissions Some states may require the use of automatic fuel shut off containers to reduce fuel spillage Stored fuel ages Do not mix more fuel than you expect to use in thirty 30 days ninety 90 days when a fuel stabilizer is added Stored two stroke fuel may separate ALWAYS shake fuel container thoroughly before each use AFTER USE DO NOT store a unit with fuel in its tank Leaks c
15. OT TRANSFERABLE TO SUBSEQUENT OWNERS EXCEPT FOR EMISSION RELATED PARTS Repair parts and accessories replaced under this warranty are warranted only for the balance of the original unit or accessory warranty period Any damage caused by improper installation or improper maintenance is not covered by this warranty All parts or products replaced under warranty become the property of ECHO Inc This warranty is separate from the Emission control warranty statement supplied with your new product Please consult the Emission Control Warranty Statement for details regarding emission related parts For a list of Authorized ECHO Dealers refer to WWW ECHO USA COM or call 1 800 432 ECHO OWNER S RESPONSIBILITY To ensure trouble free warranty coverage it is important that you register your ECHO equipment on line at WWW ECHO USA COM or by fill ing out the warranty registration card supplied with your unit Registering your product confirms your warranty coverage and provides a direct link if we find it necessary to contact you The owner shall demonstrate reasonable care and use and follow preventative maintenance storage fuel and oil usage as prescribed in the operator s manual Should a product difficulty occur you must at your expense deliver or ship your ECHO unit to an authorized ECHO servicing dealer for warranty repairs within the applicable warranty period and arrange for pick up or return of your unit after the repairs have been made For your ne
16. acter of the Engine Family on the Emission Control Information label Sample below is C K or T the emission control system is EM and TWC 3 way catalyst The fuel tank fuel line emission control system is EVAP evaporative emissions Evaporative emissions for California models may only be applicable to fuel tanks An Emission Control Label is located on the engine This is an example only information on label varies by engine family 12 PRODUCT EMISSION DURABILITY EMISSION COMPLIANCE PERIOD The 300 hours emission compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual EMISSION CONTROL INFORMA TION ENGINE FAMILY EHXS xxxxxx DISPLACEMENT X2X2Xcc EMISSION COMPLIANCE PERIOD 300Hours THIS ENGINE MEETS U 5 EPA EXH EVP EMISSION REGULATIONS FOR MODEL YEAR xxxx REFER TO OWNERS MANUAL FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS YAMABIKO CORP xxxxxx E TROUBLE SHOOTING Trouble Engine hard to start does not start Engine Fuel at No fuel e Fuel filter clogged e Clean or replace cranks carburetor gt at carburetor Fuel line clogged e Clean e Carburetor e Ask your ECHO dealer No fuel at e Carburetor e Ask your ECHO dealer cylinder gt Silencer wet Fuel mixture is too ric
17. an occur Return unused fuel to an approved fuel storage container STORAGE Fuel storage laws vary by locality Contact your local government for the laws affecting your area As a precaution store fuel in an approved airtight container Store in a well ventilated unoccupied building away from sparks and flames STARTING COLD ENGINE A WARNING WHEN ENGINE IS STARTED CONFIRM IF THERE IS NOT ANY ABNORMAL VIBRATION OR SOUND IF THERE IS ABNORMAL VIBRATION OR SOUND ASK YOUR DEALER TO REPAIR e Stand the engine upright on a level surface e Place ignition switch in ON START RUN position e Push purge bulb 3 to 4 times or until fuel is visible in fuel return line e Shift choke lever to close position START e Pull starter handle until the engine fires e Shift choke lever to full open position and if necessary start the engine again and allow to warm up before using The clutch engages at approximately 3500 r min Therefore the drill bit may rotate at fast idle engine speed STARTING WARM ENGINE e Place ignition switch in ON START RUN position e Pull starter handle until the engine fires Do not use the choke j STOPPING ENGINE START e Set throttle trigger in idle position e Place ignition switch in STOP position NOTE When engine does not stop shift choke lever to close position Check and repair ignition switch before starting the engine again Choke lever 10
18. arest authorized ECHO servicing dealer call ECHO s Dealer Referral Center at 1 800 432 ECHO or you can locate an ECHO servicing dealer at WWW ECHO USA COM Should you require assistance or have questions concerning ECHO s Warranty Statement you can contact our Consumer Product Support Department at 1 800 673 1558 or contact us through the web at WWW ECHO USA COM PRODUCT WARRANTY PERIOD RESIDENTIAL APPLICATION e 5 YEAR WARRANTY All units for residential or non income producing use will be covered by this limited warranty for five 5 years from date of purchase EXCEPTIONS e For two stroke engine powered products the electronic ignition module flexible drive cables SRM solid drive shafts and TC tines are warranted for the life of the product on parts only e Cutting attachments such as but not limited to bars chains sprockets blades and nylon trimmer heads for residential or non income producing use will be covered for failures due to defects in material or workmanship for a period of 60 days from original product purchase date Any misuse from contact with concrete rocks or other structures is not covered by this warranty e ECHO s Rapid Loader String Head carries a lifetime warranty on the line locking system parts only no labor Refer to your operator s manual for string head installation and maintenance instructions e All SB Series and PRO ATTACHMENT SERIES Split Shaft attachments carry the same warranty duration as
19. cise to strengthen the hand and arm muscles e Seea doctor if you feel tingling numbness or pain in the fingers hands wrists or arms The sooner RSI CTS is diagnosed the more likely permanent nerve and muscle damage can be prevented OPERATING TECHNIQUES e When starting to drill run the engine at full e Do not attempt to repair the machine unless throttle you are qualified to do so Av WARNING e Do not operate the machine with a damaged or excessively worn drill bit BEFORE DRILLING BE SURE TO READ AND UNDERSTAND THE ENTIRE OPERATOR S e Always ensure all handles and guards are MANUAL TO AVOID THE CHANCE OF fitted when using the machine Never attempt SERIOUS INJURY to use an incomplete machine or one fitted with an unauthorized modification e Do not force the drills and only move as quickly as the drills will allow e When transporting or storing the machine always remove the drill bit e Stop the engine and disconnect from ignition cable before cleaning or when clearing a e To reduce fire hazard keep engine and silencer blockage checking maintenance or working free of debris leaves or excessive grease on the machine e Handle drill with care contacting with drills e Handle fuel with care it is highly flammable may Cause injury Never add fuel to a machine with a running or hot engine Part Number X505 002310 Part Number X505 002570 DESCRIPTION Part Number X505 002310 Ifa decal cannot be
20. d with unit until it reaches the bottom of the chuck then back it out slightly tighten the chuck laws evenly and completely IMPORTANT Use drill bits suited for the material being drilled and for the depth of hole required Plug Chuck Drillbit Tighten three points evenly OPERATION 44 WARNING Moving parts can amputate fingers or cause severe injuries Keep hands clothing and loose objects away from all openings Always stop engine disconnect spark plug and make sure all moving parts have come to a complete stop before removing obstructions clearing debris or servicing unit 44 WARNING Engine exhaust IS HOT and contains Carbon Monoxide CO a poison gas Breathing CO can cause unconsciousness serious injury or death Exhaust can cause serious burns ALWAYS blow exhaust away from your face and body CHECK UP OF NUTS AND OTHER WARNING HARDWARES ALTERNATIVE FUELS SUCH AS E 20 20 ETHANOL E 85 85 ETHANOL OR ANY e Check up loose nuts bolts and screws before FUELS NOT MEETING ABOVE using the unit every day REQUIREMENTS ARE NOT APPROVED FOR USE IN ECHO 2 STROKE GASOLINE FUEL STATEMENT ENGINES USE OF ALTERNATIVE FUELS MAY CAUSE GASOLINE Use 89 Octane R M 2 mid grade PERFORMANCE PROBLEMS LOSS OF or higher gasoline or gasohol known to be good POWER OVERHEATING FUEL VAPOR quality LOCK AND UNINTENDED MACHINE Gasohol may contain up to 10 Ethyl grain OPERATION INCLUDING BUT NOT LIM
21. erein This limited warranty may be modified only by ECHO 99922201032 11 18 2011 20 ECHO INCORPORATED EMISSION CONTROL WARRANTY STATEMENT FOR ECHO AND SHINDAIWA BRANDS The Environmental Protection Agency EPA and the California Air Resources Board C A R B and ECHO Incorporated ECHO Inc are pleased to explain the emission control system warranty on your 2010 and later equipment small off road engine SORE New equipment SORE must be designed built and equipped to meet stringent EPA and C A R B anti smog standards ECHO Inc must warrant the emission control system on your equipment SORE for the periods of time listed below provided there has been no abuse neglect or improper maintenance of your equipment SORE Your emission control system may include parts such as carburetor fuel injection system ignition system catalytic converter muffler fuel tank fuel feed lines fuel cap assembly spark plug air filters and other associated components Where a warrantable condition exists ECHO Inc will repair your equipment SORE at no cost to you including diagnosis parts and labor The Emission Control System warranty is extended to the original owner including all subsequent owners MANUFACTURER S WARRANTY COVERAGE The emission control system is warranted for 2 years or the length of the ECHO Inc warranty whichever is longer If any emission related part on your equipment is defective the part will be repaired or replaced by ECHO Inc
22. h e Open choke with fuel e Clean replace air filter e Adjust carburetor e Ask your ECHO dealer Spark at No sparkat e Ignition switch off e Turn switch on end of end of plug e Electrical problem e Ask your ECHO dealer plug wire wire Spark at aly No sparkat Spark gap incorrect e Adjust 0 6 to 0 7 mm plug plug 0 024 to 0 028 in e Covered with carbon e Clean or replace e Fouled with fuel e Clean or replace e Spark plug defective e Replace plug e Internal engine problem e Ask your ECHO dealer Engine Dies or e Air filter dirty e Clean or replace runs accelerates poorly e Fuel filter dirty e Clean or replace e Fuel vent blocked e Clean e Spark plug e Clean and adjust replace e Carburetor e Adjust e Cooling system blocked e Clean e Exhaust port spark e Clean arrester screen blocked WARNING e ALL ENGINE DRILL SERVICE OPERATIONS OTHER THAN ITEMS LISTED IN THE OPERATOR S MANUAL SHOULD BE PERFORMED BY AN AUTHORIZED ECHO DEALER e FUEL VAPORS ARE EXTREMELY FLAMMABLE AND MAY CAUSE FIRE AND OR EXPLOSION NEVER TEST FOR IGNITION SPARK BY GROUNDING SPARK PLUG NEAR CYLINDER PLUG HOLE OTHERWISE SERIOUS PERSONAL INJURY MAY RESULT 13 MAINTENANCE AIR FILTER e Clean before use Remove air cleaner cover and pull out air filter Lightly brush off dust or wash it in water and detergent Dry completely before putting it back in place FUEL FILTER e Check periodically Do not allow dust to enter into fuel tank
23. he use of two stroke oils that do not meet the ISO L EGD ISO CD 13738 and JASO M345FD Standards Engine problems due to inadequate lubrication caused by failure to use an ISO L EGD compliant and JASO M345FD registered oil will void the two stroke engine limited warranty ECHO Power Blend Two Stroke Oil meets the ISO L EGD and JASO M345FD Standard Emission related parts are covered for 5 years residential use or 2 years commercial use regardless of two stroke oil used per the statement listed in the EPA or California Emission Defect Warranty Explanation e Damage caused by use of gasohol containing methanol wood alcohol or gasoline containing less than 89 octane Only use gasoline which contains 89 octane or higher Gasohol which contains a maximum 10 ethanol grain alcohol or 15 MTBE methyl tertiary butyl ether is also approved The prescribed mixing ratio of gasoline to oil is listed on the ECHO oil label and covered in your operator s manual e Engine damage caused by use of ether or any starting fluids e Damage caused by tampering with engine speed governor or emission components or running engines above specified and recommended engine speeds as listed in your operator s manual Operation of the unit with improperly maintained removed cutting shield or removed damaged air filter e Damage caused by dirt pressure or steam cleaning the unit salt water corrosion rust varnish abrasives and moisture Defects malfunctions
24. it 17 72 x 13 39 x 11 42 inch Engine type Air cooled Two stroke single cylinder engine displacement 25 4 1 55 cu inch recommended maximum engine speed 10500 recommended engine idling speed 2800 engine speed at beginning of clutch engagement 3600 carburetor diaphragm type ignition flywheel magneto CDI system spark plug NGK BPM8Y starter recoil starter clutch automatic centrifugal Fuel mixture ratio 50 1 ratio with ECHO Power Blend X ISO L EGD ISO CD 13738 and JASO M345 FC FD two stroke air cooled engine oil gasoline Use 89 octane unleaded Do not use fuel containing methyl alcohol more than 10 ethyl alcohol or 15 MTBE Do not use alternative fuels such as E 20 or E 85 fuel consumption at engine maximum power 0 62 20 97 US fl oz 18 WARRANTY STATEMENTS ECHO LIMITED WARRANTY STATEMENT FOR PRODUCT SOLD IN USA AND CANADA BEGINNING 01 01 2010 ECHO S RESPONSIBILITY ECHO Incorporated s Limited Warranty provides to the original purchaser that this ECHO product is free from defects in material and workmanship Under normal use and maintenance from date of purchase ECHO agrees to repair or replace at ECHO s discretion any defective product free of charge at any authorized ECHO servicing dealer within listed below application time periods limitations and exclusions THIS LIMITED WARRANTY IS ONLY APPLICABLE TO ECHO PRODUCTS SOLD BY AUTHORIZED ECHO DEALERS IT IS EXTENDED TO THE ORIGINAL PURCHASER ONLY AND IS N
25. mble silencer NOTE Be careful not to scratch the cylinder or piston when cleaning the cylinder exhaust port Silencer cover Silencer 3 Clean deposits from cylinder exhaust port and silencer EXHAUST PORT CLEANING Level 2 Tools required 4 mm Hex Wrench Wood or plastic scraper Parts Required As needed Heat Shield 1 Remove spark plug lead from spark plug and remove engine cover 2 screws 2 Place piston at top dead center Remove muffler A and heat shield B 3 Use a wood or plastic scraping tool to clean deposits from cylinder exhaust port IMPORTANT Never use a metal tool to scrape carbon from the exhaust port Do not scratch the cylinder or piston when cleaning the exhaust port Do not allow carbon particles to enter the cylinder 4 Inspect heat shield and replace if damaged 5 Install heat shield and muffler 16 Tighten muffler mounting bolts or nuts to 80 95 inelbf 90 110 kgfecm Start engine and warm to operating temperature Stop engine and re tighten mounting bolts or nuts to specifications Install engine cover and attach spark plug lead STORAGE LONG TERM STORAGE Over 30 Days Do not store your unit for a prolonged period of time 30 days or longer without performing protective storage maintenance which includes the following 1 Store unit in a dry dust free place out of the reach of children and other unauthorized persons Place ig
26. nition switch in STOP position Remove accumulation of grease oil dirt and debris from exterior of unit 4 Perform all periodic lubrication and services that are required 5 Tighten all the screws bolts and nuts A WARNING DO NOT STORE IN AN ENCLOSURE WHERE FUEL FUMES MAY ACCUMULATE OR REACH AN OPEN FLAME OR SPARK Drain the fuel tank completely and pull the recoil starter handle several times to remove fuel from the carburetor Remove the spark plug and pour 1 2 tablespoon 1 4 oz of fresh clean 2 stroke engine oil into the cylinder through the spark plug hole A Place a clean cloth over the spark plug hole B Pull the recoil starter handle 2 or 3 times to distribute the oil inside the engine C Observe the piston location through the spark plug hole Pull the recoil starter handle slowly until the piston reaches the top of its travel and leave it there Install the spark plug do not connect ignition cable Lubricate the drill bit with a heavy coat of oil to prevent rust NOTE For future reference you should keep this operator s manual 17 SPECIFICATIONS es ee EDR 260 Mass without drill bit 5 18 11 42 Ib Volume fuel tank 0 58 19 6 US fl oz Drill size 32 178 1 25 7 inch chuck capacity 13 0 5 inch speed 610 Mission reduction ratio 17 1 regular side 19 0 reverse side lubrication grease External Dimensions length x width x height 450 x 340 x 290 without drill b
27. open toed shoes or operate unit while bare footed e Wear eye and hearing protection devices e Use caution when handling fuel Put the caps back tightly on both the fuel can and the engine drill fuel tank Move at least 3 m 10 feet from the re fueling point and be sure there is no leakage of fuel from the fuel tank cap or the fuel system before starting the engine e Operate this gasoline powered engine equipment in a well ventilated area only e Start the unit on the ground with the throttle set at idle Do not start if the drills are obstructed by the ground or any other object e Never allow children to use the machine e Do not allow anyone to hold the material you are drilling e Keep afirm grip on the engine drill with both hands one hand on the front handle the other hand on the rear handle e Do all drilling at full throttle speed Drilling at less at than full soeed can damage the clutch by allowing it to slip AW WARNING USE A FIRM GRIP WITH THUMBS AND FINGERS ENCIRCLING THE HANDLES A FIRM GRIP WILL HELP YOU KEEP CONTROL OF THE ENGINE DRILL NEVER OPERATE THE ENGINE DRILL ONLY ONE HAND OR BODILY INJURY CAN OCCUR e Always carry the engine drill with the engine stopped and the HOT muffler away from your body PROTECTIVE EQUIPMENT Always wear eye protection goggles that meet ANSI 287 1 standards Wear hearing protection ECHO recommends that hearing protection be worn at all times e Dres
28. or failures resulting from abuse misuse neglect modifications alterations normal wear improper servicing or use of unauthorized attachments e Incorrect storage procedures stale fuel including failure to provide or perform required maintenance services as prescribed in the operator s manual Preventative maintenance as outlined in the operators manual is the customer s responsibility e Failures due to improper set up pre delivery service or repair service by anyone other than authorized ECHO servicing dealer during the warranty period Certain parts and other items are not warranted including but not limited to lubricants starter cords and engine tune ups Use of spark plugs other than those meeting performance and durability requirements of the OEM spark plug listed in the Operator s Manuals e Overheating or carbon scoring failures due to restricted clogged exhaust port or combustion chamber including damage to spark arrester screen e Adjustments after the first 30 thirty days and beyond such as carburetor adjustment and throttle cable adjustment e Damage to gears or gear cases caused by contaminated grease or oil use of incorrect type or viscosity of lubricants and or failure to comply with recommended grease or oil change intervals e Damage caused by loading SHRED N VAC beyond recommended capacity e Damage caused by pump or sprayer running dry pumping or spraying caustic or flammable materials or lack of or b
29. rial and workmanship that would cause it to fail to conform with applicable requirements for 2 years or the length of the ECHO Inc warranty whichever is longer The warranty period begins on the date the product is purchased by an end user HOW WILL A COVERED PART BE CORRECTED If there is a defect in a part covered by this warranty any ECHO Inc Authorized Service Dealer will correct the defect You will not have to pay anything to have the part adjusted repaired or replaced This includes any labor and diagnosis for warranted repairs performed by the dealer In addition engine parts not expressly covered under this warranty but whose failure is a result of a failure of a covered part will be warranted WHAT PARTS ARE COVERED Any applicable emission related part not scheduled for required maintenance will be repaired or replaced within the warranty period The repaired or replaced part will be warranted for the remaining ECHO Inc warranty period Any warranted part that is scheduled only for regular inspection in the written instructions supplied is warranted for the warranty period stated above Any such part repaired or replaced under warranty will be warranted for the remaining ECHO Inc warranty period Any emission related part scheduled for replacement during required maintenance is warranted for the period of time prior to the first scheduled replacement point for that part Any such part repaired or replaced under warranty shall be wa
30. roken strainers Additional damage to parts or components due to continued use after operational problem or failure occurs Should operational problem or failure occur the product should not be used but delivered as is to an authorized ECHO servicing dealer It is a dealer s and or customer s responsibility to complete and return the warranty registration card supplied with your ECHO product or by visiting WWW ECHO USA COM Your receipt of purchase including date model and serial number must be maintained and presented to an authorized ECHO servicing dealer for warranty service Proof of purchase rests solely with the customer Some states do not allow limitations on how long an implied warranty lasts so the above limitations may not apply to you Some states do not allow the exclusion or limitation of incidental or consequential damages so you may also have other specific legal rights which vary from state to state This limited warranty is given by ECHO Incorporated 400 Oakwood Rd Lake Zurich IL 60047 DISCLAIMER OF IMPLIED WARRANTIES This limited warranty is in lieu of all other expressed or implied warranties including any warranty of FITNESS FOR A PARTICULAR PURPOSE OR USE and any implied warranty of MERCHANTABILITY otherwise applicable to this product ECHO and its affiliated companies shall not be liable for any special incidental or consequential damage including lost profits There are no warranties extended other than as provided h
31. rranted for the remainder of the period prior to the first scheduled replacement point for that part Any manufacturer approved replacement part may be used in the performance of any warranty maintenance or repairs on emission related parts and must be provided without charge if the part is still under warranty Any replacement part that is equivalent in performance and durability may be used in non warranty maintenance or repairs and shall not reduce the warranty obligations of the manufacturer Throughout the equipment SORE warranty period ECHO Inc will maintain a supply of warranted parts sufficient to meet the expected demand for such parts SPECIFIC EMISSION RELATED WARRANTED PARTS e Electronic Ignition System e Spark Plug e Catalytic Converter Muffler Assembly e Carburetor complete assembly or replaceable components e Choke e Fuel Injection Assembly or replaceable components e Fuel Tank e Fuel Cap Assembly e Air Filter e Fuel Feed Line and associated clamps connectors as applicable WHAT IS NOT COVERED Any failure caused by abuse neglect improper maintenance unapproved modifications use of unapproved add on parts modified parts or unapproved accessories This Emission Control Warranty is valid only for the U S A it s Territories and Canada 99922201033 01 2010 21 22
32. s properly Do not wear loose clothing or jewellery they can be caught in moving parts Use of sturdy gloves non skid footwear and safety glasses is recommended e While operating the machine always be sure of a secure position e Wear non slip heavy duty work gloves to improve your grip on the engine drill handles The gloves also help reduce the transmission of machine vibrations to your hands PROTECTING OTHERS Spectators children fellow workers and animals must be warned to come no nearer than 4 6 m 15 feet while the engine drill is in use People working in the area near you should wear the same protective equipment as the operator PHYSICAL CONDITION Your judgement and dexterity may be impaired if you are ill or have taken alcohol or other substances known to affect the way you would normally function _ Painful or numb fingers See your doctor A WARNING PRECAUTION AGAINST VIBRATION AND COLD IT IS BELIEVED THAT A CONDITION CALLED RAYNAUD S PHENOMENON WHICH AFFECTS THE FINGERS OF CERTAIN INDIVIDUALS MAY BE BROUGHT ABOUT BY EXPOSURE TO VIBRATION AND COLD EXPOSURE TO VIBRATION AND COLD MAY CAUSE TINGLING AND BURNING SENSATIONS FOLLOWED BY LOSS OF COLOR AND NUMBNESS IN THE FINGERS THE FOLLOWING PRECAUTIONS ARE STRONGLY RECOMMENDED BECAUSE THE MINIMUM EXPOSURE WHICH MIGHT TRIGGER THE AILMENT IS UNKNOWN KEEP YOUR BODY WARM ESPECIALLY THE HEAD NECK FEET ANKLES HANDS AND WRISTS MAINT
33. the units they are designed to fit COMMERCIAL APPLICATION e 1 YEAR WARRANTY All Chain Saws QuikVent Saws and Cut Off Saws for commercial institutional agricultural industrial or income producing use will be covered by this limited warranty for one 1 year from the date of purchase e 2 YEAR WARRANTY All other units for commercial institutional agricultural industrial or income producing use will be covered by this limited warranty for two 2 years from the date of purchase EXCEPTIONS e For two stroke engine powered products the electronic ignition module flexible drive cables SRM solid drive shafts and TC tines are warranted for the life of the product on parts only e Cutting attachments such as but not limited to bars chains sprockets blades and nylon trimmer heads for commercial institutional agricultural industrial rental or income producing will be covered for failures due to defects in material or workmanship for a period of 30 days from original product purchase date Any misuse from contact with concrete rocks or other structures is not covered by this warranty e ECHO s Rapid Loader String Head carries a lifetime warranty on the line locking system parts only no labor Refer to your operator s manual for string head installation and maintenance instructions e All SB Series and PRO ATTACHMENT SERIES Split Shaft attachments carry the same warranty duration as the units they are designed to fit R
Download Pdf Manuals
Related Search