Home

Earlex SS200 User's Manual

image

Contents

1. The unit is now ready to operate Please see operation instructions below NB The ceiling waste water hose is only required when working on ceilings and is not needed for work on walls It can be secured to the main hose using the Velcro straps and stored in the tube when not in use or left off the assembly of the product PREPARATION If the plaster underneath the Paper or Artex is in a poor state of repair care must be taken If the plaster is old or cracked the steam may penetrate causing the plaster to blister or fall out Check the plaster first and do not continue if this is unsound 1 In order to achieve the fastest result it is best to gently score the wallpaper to be removed before operating the stripper 2 If you have heavily embossed paper or painted paper this is essential 3 Perforate the paper using a perforator tool or alternatively score the paper ina criss cross pattern approximately 6 inches apart with the edge of a wallscraper A perforator tool is extremely useful for large surface areas and is available to buy through the online shop www earlex com For further availability please call our Customer Care Line on 01483 454666 quoting part number PPF1 or email enquiries earlex co uk 4 As with all decorating care should be taken to protect carpets and furniture with covers OPERATION DANGER FROM STEAM The unit has been designed for safe and fast removal of wallpaper but you must be aware at all
2. where in accordance with the legislation this product must not be disposed of in your normal household waste Instead it is your responsibility to dispose of this type of waste by handing it over to special designated collection points for recovery and recycling This product is marked with a wheelie bin symbol with a cross on it to remind you of this action The objective of this directive is to help conserve resources and ensure that it is recycled in a manner that protects human health and the environment For more information about where you can drop off your waste please contact your local authority Take back facilities are free of charge GUARANTEE This product is guaranteed for a period of 2 years against faulty materials and workmanship The guarantee specifically excludes the use for hire and rental purposes Whilst every possible care is taken by Earlex to ensure that our products leave the factory in good working order Earlex cannot under any circumstances accept liability for problems or damage caused by use of such products not in adherence to the instructions enclosed Any unit that has been modified in any way or used on incorrect voltage will not be covered by the guarantee Consumables such as filters are not covered by the guarantee This guarantee does not affect your statutory rights In the event of a fault occurring please contact our helpline before returning the unit to our Service Department at the address below toget
3. CEILINGS N If you are right handed hold the steam plate in your left hand and place flat against the ceiling where you wish to commence removing the Artex paper Leave the plate on the ceiling for a maximum of 10 seconds The length of time will depend on the type of covering you are removing If you are left handed you may find it easier to operate with the other hand Move the steam plate to the section immediately next to where you have just been working and use a wallscraper to remove the section that has just been steamed Empty the ceiling waste water tank when it starts to become full It holds a total of 500ml of water and in 78 minutes should only require emptying once if a full tank is used By working in this way you should be able to remove Artex paper continuously You may have to leave the plate on the ceiling for longer periods or re steam if not completely removed Operate the steamer until steam is no longer produced there is a safety cut out when water level gets too low switch off the vacuum and leave for a minimum of 2 minutes before refilling Allow to cool completely before packing away COMPLETION amp STORAGE Switch off steam and vacuum pump switches and unplug the unit Allow the unit to cool completely and then empty the unit and waste water collection tank of any remaining water Never leave water in the unit whilst being stored Once the unit has cooled wind the cable around the base of the feet
4. base of the unit is not blocked by the dustsheet as this will cause the motor to overheat The motor is fitted with a re setting thermal cut out If thermal cut out is activated please allow 15 minutes for the unit to reset STRIPPING Remember to check a small area first The foam filter part HF0063 should be checked for debris and cleaned on a regular basis DO NOT try to remove this while the unit is still steaming Please allow the unit to cool before cleaning the filter WALLS Please keep the hose clipped into the steam plate handle when working on walls as shown l 1 Ifyou are right handed hold the steam plate in your left hand and place flat against the wall where you wish to commence removing the paper 2 Leave the plate against the wall for approximately 10 seconds The length of time will depend on the type of wall covering you are removing 3 Ifyou are left handed you may find it easier to operate with the other hand 4 Move the steam plate to the section immediately next to where you have just been working and use a wallscraper to remove the section that has just been steamed 5 By working in this way you should be able to remove paper continuously 6 Operate the steamer until steam is no longer produced there is a safety cut out when water level gets too low switch off the vacuum pump and boiler switch and then leave for a minimum of 2 minutes before refilling Allow to cool completely before packing away
5. on the unit and then wind the hose around the leg clips Slot the steam plate into the side slots on the feet HOW TO ASSEMBLE THE SPARE VACUUM CUP AND STEAM PLATE FILTER Insert the vacuum seal 6 into the steam plate as shown 1 4 1 5 Insert the foam pump filter 7 as shown SAFETY CUT OUT If the unit should cut out when being used this is because the safety thermal cut out has operated Wait 2 minutes and refill with water The cut out will automatically reset and you should have to wait between eight and fifteen minutes before steam is again produced The cut out will not protect the element if a part filled unit is tilted during use in a way which enables part of the element to be out of the water for longer than 15 20 seconds OTHER USES Artex Normally Artex can be removed using the same method as for wallpaper although the steaming time may be longer Vinyl Floor Tiles Vinyl floor tiles can also be removed if the plate is left long enough for the heat to penetrate the adhesive Once the adhesive is hot it softens and the tile can be peeled from the floor Suction cap is to be removed if used for this operation TROUBLESHOOTING My unit fails to boil The unit has probably not been left for long enough to cool please refer to section on safety cut out Check the fuse in the plug is sound and is approved to BS1362 and rated at 13 amps If using an extension lead check that it is rated at 13 amps an
6. physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure they do not play with the appliance Never remove filler cap or detach hose whilst unit is operating Switch off and wait for 2 minutes before removing filler cap to refill boiler Allow to cool completely before emptying boiler Use only standard tap water Never use detergents or chemicals Extreme care must be taken if the unit is used in bathrooms Always be aware of danger of electrocution from stored water in baths or sinks e It is recommended that an RCD residual current device rated at 30mA is fitted into the mains supply socket for added protection against electric shock e Keep equipment away from children and pets e Use only genuine Earlex replacement parts WHATS INCLUDED PARTS LIST 1 Boiler 6 Vacuum Seal Spare Part HF0061 A Steam Tube 2 Ceiling Waste Water Collection Tank 7 Foam Filter Spare Part HFO063 B Steam Plate Vacuum Tube Spare Part HF0021 8 Spatula Spare Part HF0086 3 Main Steam Hose 9 Filler Cap Spare Part F13 C Vacuum Inlet Spare Part HF0058 10 Velcro Straps x 4 D Steam Outlet 4 Ceiling Waste Water Drainage Hose 11 Hose amp Cable Storage Clips E Waste Water Outlet Cover 5 Steam plate Spare Part HF0026 Spare Part HF0016 F B
7. times that steam is being produced and it can burn FILLING WARNING BEWARE OF HOT WATER DISCHARGE PRIOR TO STEAM EMISSION DO NOT e Over tighten the filler cap e Overfill the unit by tilting the unit as hot water may be forced up the hose e Leave unattended 1 Remove filler cap on top of the boiler and fill to the top with clean water preferably hot Do not tilt the unit when filling If refilling the unit ensure that it is disconnected from the main power 2 If filled to the maximum point of overflow 5 litres the stripper will operate for approximately 78 minutes before requiring refilling It will take longer to commence steaming on a maximum fill taking up to 15 minutes 3 Always replace the filler cap after filling The cap only needs to be hand tight 4 The capacity of 5 litres 9 pints provides approximately 78 mins steaming time before the safety cut out operates For a shorter steaming time use less water 5 Connect mains lead to the power socket and switch on the steam switch only indicated by this symbol It will take between 8 15 minutes approx for the unit to start producing steam depending on the temperature and the quantity 4 of water used WARNING Hot water discharge before steam is produced 6 Once steam is produced at the steam plate you will need to switch the vacuum pump on indicated by this symbol You are then ready to commence operation Make sure that the motor air inlet on the
8. Earlex Model SS200 Hands Free Wallpaper Stripper Please read these instructions carefully before use Thank you for purchasing an Earlex Hands Free Steam Wallpaper Stripper In order to obtain the best results please read these instructions BEFORE commencing any work Please also make a special note of the safety rules and RETAIN FOR FUTURE REFERENCE Earlex Ltd will not accept any responsibility for the use of this product if used for any purposes other than those detailed in this manual CONTENTS Page2 Safety Rules Page 3 What s Included amp Set Up Page 4 Preparation amp Operation e Filling e Stripping Page 5 Completion amp Storage Page6 Safety Cut Out Other Uses amp Trouble Shooting Page 7 Guarantee Page 8 Other Products in the Earlex Range SAFETY RULES PLEASE READ CAREFULLY Please ensure that you test the plaster before commencing work If the wallpaper stripper is left attached to the wall for long periods of time over 10 seconds it may loosen damaged or blown plaster SYMBOLS A CAUTION l Warning hot liquid or steam can burn Danger of scalding Steam may also condense into boiling droplets Steam should not be directed towards electrical appliances Danger of scalding appears on the cap as this symbol BoA DO NOT e Leave unattended e Leave steam plate attached to the wall for longer than 10 seconds This is dependant on the type of wall covering being removed and condition of
9. d it is fully unwound My unit leaks steam from the Pressure Release Valve The pressure release valve is a special low pressure valve and it must not be replaced by any other valve Never block the safety valve Allow time to cool then clean the rubber washer on the valve and the seat in the neck of the box Check the hose for kinks Check the hole inside the steam plate for obstructions If the hose is blocked NEVER force the safety valve closed The base of my unit is leaking water This is the residue water valve which releases a small amount of water collected by the vacuum on the steam plate when working on the ceiling This happens to ensure the safe running of the unit A maximum of 45ml of water will be expelled from this in 78 minutes Please protect all carpets and flooring with dust sheets during operation The steam plate is not sticking to the wall Ensure you have switched the vacuum on and inserted the foam vacuum cup and filter into the steam plate as per the instructions on page 5 of this manual If you require further assistance please contact our Customer Care Line on Tel 01483 454666 Fax 01483 454548 Email enquiries earlex co uk Opening hours Monday Friday 08 30 17 00 excluding bank holidays Website www earlex com Information on the disposal of waste electrical amp electronic equipment known as WEEE Your attention is brought to new directives applicable to the disposal of electrical or electronic equipment
10. her with a copy of your purchase receipt All repairs will be dealt with speedily EC Declaration of Conformity We declare that the unit SS200 conforms to 2006 95 EC EN60335 1 EN60335 2 54 2004 108 EC EN55014 1 EN55014 2 EN61000 3 2 EN61000 3 3 amp EMF EN 50366 Pa Tim Hopper Technical Director MAINS CONNECTION This product is supplied with a specially prepared mains lead if the cord is damaged it must be replaced by the manufacturer its service agent or similar qualified persons in order to avoid a hazard Please read the following safety instructions before use 1 aa aad If the moulded plug is cut off from the mains lead then the plug must be disposed of safely NEVER under any circumstances insert such a plug into a 13 amp socket NEVER under any circumstances use the appliance or mains lead without the fuse cover fitted This is the little cover fixed into the base of the plug to hold the fuse in place If you lose the fuse cover then please contact our helpline on 01483 454666 A replacement fuse must be rated at 13 amp These must be manufactured and approved to BS1362 IF INANY DOUBT PLEASE CONTACT AN ELECTRICIAN If you are using an extension lead it must be rated at a minimum of 10 amps and fully unwound Do not operate with a lead rated at less than 10 amps as this will cause premature failure of the motor which is not covered by the guarantee OTHER PRODUCTS IN THE EARLEX RANGE HVLP High Volume L
11. oiler Vacuum Tube Spare Part HF0092 G Steam Hose Seal Spare Part HF0094 Please follow these simple instructions to fully assemble your hands free wallpaper stripper BEFORE use 1 Remove hoses and Velcro straps from plastic bags 2 Themainhose has two small black tubes coming out of one end The larger tube A is for steam and the smaller tube B is for the vacuum Attach these tubes to the steam plate by inserting through the handle hole Attach the larger tube A to the steam outlet D and the smaller tube B to the vacuum inlet C 3 Once the tubes are connected clip the hose into the steam plate handle as shown 4 Use Velcro straps to secure both hoses together SET UP 5 CEILING SET UP Connect the Ceiling Waste Water Drainage Hose to the Waste Water Outlet on the steam plate Store the Waste Water Outlet Cover E in the tube on the steam plate for security 6 WALL SET UP Store the Ceiling Waste Water Drainage Hose in the tube on the steam plate for security Ensure the Waste Water Outlet Cover is pushed into the Waste Water Outlet to prevent steam escaping when using the unit on walls 7 Screw on the other end of the main hose to the boiler and tighten by hand 8 Connect the rubber Boiler Vacuum Tube F from the the vacuum outlet of the main hose to the vacuum port on top of the unit 9 Place the end of the ceiling waste water hose into the waste water collection tank 10
12. ow Pressure Spray Stations The Best Way to Paint Ideal for spraying all types of jobs from large scale to small detail with equal ease e Fast and easy e Provides a quality finish with no brush marks e Can spray many types of paint such as varnishes emulsions glazes wood treatments and many more CombiVac Workshop Vacuum amp Blower WD1000 The 1100W motor provides a powerful suction and blowing facility which is ideal for use around the workshop garage caravan car garden and home e 20 litre recovery tank with 12 litres wet capacity 13 5 litres dry capacity and designed for the rough and tumble of everyday use e On board storage facilities e 6 metres working length Heat Gun Kit HG2000K A 2000W heat gun in a sturdy and convenient carry case and includes a range of useful accessories e Two heat settings at 350 C or 600 C e Selection of four nozzles 3 shavehooks and scraper Steam Cleaning Kit SC165 The UK s number one best selling steam cleaner with a range of steam cleaning accessories e 4 5 litre capacity e Includes carpet cleaning head window tile cleaner jet nozzle with brush and scraper upholstery cleaner and large steam plate for wallpaper stripping All Earlex products come with a two year guarantee For further information on all these products and much more visit www earlex com or call our Helpline on 44 0 1483 454666 wa Earlex Earlex Ltd Opus Park Slyfield Industrial Estate Moo
13. plaster Always test on a small area first Modify pressure valve supplied Stand on the stripper Pull by the mains lead Point hose or steam plate at anyone Allow water or steam to enter light switches or sockets Strain or kink hose Block the top safety pressure relief valve it is there for your protection Switch off the vacuum whilst the steam plate is attached to the wall ceiling e Be careful of overhead water dripping down when working on the ceiling e When removing Paper Artex from ceiling ensure the steam plate is tilted away from face and body and regularly check that excessive water is not being retained in the steam plate When using on the ceiling remember to empty the waste water tank if it becomes full Always use and store upright If using on the stairs ensure boiler is in a safe and secure position The unit becomes hot in use Do not touch Only move by using the carry handle Always wear suitable protective clothing when operating the stripper A small amount of water will be expelled from a small hose in the base of the unit onto the surface below This is to ensure the safe running of the wallpaper stripper and should not be blocked Protect areas beneath the boiler likely to be damaged by water or heat by placing the unit on a tray or plastic sheet e The equipment must be unplugged after use and before cleaning e This appliance is not intended for use by persons including children with reduced
14. rfield Road Guildford Surrey GU1 1SZ UK Tel 44 0 1483 454666 Fax 44 0 1483 454548 Earlex Ltd 2011 enquiries earlex co uk HF0078 06 11

Download Pdf Manuals

image

Related Search

Related Contents

『DX-2G』の取扱説明書がダウンロードできます。  Manual - DATAQ Instruments  Sony MEX-GS600BT User's Manual  BMW Serie 5 E60 (2004) Para Instalar DVD sin  RIDGID bRaD naIleR MODel nO. R213bna RePaIR  SYBA SY-MRA25023 drive bay panel  Índice: 1. Introducción 2. Crear y configurar nuestro blog en blogger  SecureManager Manual (操作説明書/約235KB)  EXTER K60/K60m/K60c manuel d`installation  HVX9000 AF Drives  

Copyright © All rights reserved.
Failed to retrieve file