E&J EJ78X-1 User's Manual
Contents
1. cjelo cj2ye 2 212 13 3 QHI gt gt Oype s o o Silel c ojojo L D E h N D 2 n gt w N 2 E N x lt D o N i 19 fre O lasa L O a Q Z g S n n c o Q 2 Z CAUTION A complete inspection of your Transport Chair including maintenance servicing and safety checks should be performed by a Graham Field authorized distributor at least every six months Z WARNING Unauthorized modification or the use of non Everest amp Jennings replacement parts could change the structure of the Transport Chair void the warranty and create a hazardous condition which could result in serious personal injury EJ78X 1 INS LAB RevC13 17 8 LIMITED WARRANTY SCOPE OF WARRANTY GF Health Products Inc GF warrants to the original purchaser only that it will replace or repair components at GF s sole discretion that are defective in material or workmanship under normal use and service All warranties are conditioned upon the proper use of the products strictly in accordance with good commercial practice and applicable GF instructions and manuals including proper use and maintenance To the extent that a component is warranted by a third party GF conveys all of its rights under that warranty to the original purchaser to the extent permitted This limited warranty shall only apply to defects that are reported to GF s customer service team withi2. A WARNING Do not lean on the Transport Chair or use it as a walker these are practices which could result in loss of balance and personal injury Z WARNING Do not use the Transport Chair on stairs or escalators Z WARNING Use the Transport Chair s positioning belt at all times to maintain proper weight distribution Ensure the positioning belt is properly adjusted Z WARNING Wheel locks are not brakes Do not use the wheel locks to slow down the Transport Chair or while the Transport Chair is moving Wheel locks are only intended to keep the Transport Chair in place when it is at a complete stop Z WARNING Notice for California Customers California Proposition 65 WARNING This product contains a chemical known to the State of California to cause cancer and reproductive or developmental harm Z WARNING GF Health Products Inc specifically disclaims responsibility for any personal injury or property damage which may occur during any use which does not comply with federal state or local laws or ordinances EJ78X 1 INS LAB RevC13 5 3 OPERATION GETTING STARTED Please familiarize yourself with main components identified in EJ78X 1 EJ79X 1 Transport Chair illustration below push handle hand are a back upholstery upper backpost a l positioning belt armpad carrying strap ax ay upper back release s paddle handle fixed arm seat upholstery with serial number label
3. bN rear caster W tipping lever frame front caster S front caster fork AN front caster socket OPERATE WHEEL LOCKS Z WARNING Wheel locks intended to keep the Transport Chair in place when it is at a complete stop are not brakes Do not use the wheel locks to slow down the Transport Chair or while the Transport Chair is moving Ensure that wheel locks lock in place appropriately before occupying or operating Transport Chair If your wheel locks are not operating correctly please see your Graham Field authorized distributor immediately for repair Attendant To engage wheel locks grasp both rubber tipped wheel lock levers and pull back completely Rear casters will be locked in place Attendant To disengage wheel locks grasp both rubber tipped wheel lock levers and push forward completely Rear casters will now be free to roll wheel lock wheel lock shown disengaged shown engaged 6 EJ78X 1 INS LAB RevC13 HANDLING TIPS The Everest amp Jennings EJ78X 1 EJ79X 1 Transport Chair has been designed and engineered to perform as a stable and well balanced unit when used for its intended purpose However it is possible to tip the Transport Chair over if it is used improperly We urge both user and attendant to learn the characteristics of your Transport Chair It is most important to learn safe methods to perform the daily activities basic to your lifestyle Use this manual as a guide for developing technique
4. left shown A M RIRA SARI A p RIRIA KARIARI IRER ROOS DORRIT SIRI RRR SIN SRORIRTR TORINO SALI ORIRISGRISIIRIGRININ RIS RRS RISEN COS DURES SERIES WRS dS Adjust footplate extension length see picture at right 1 Loosen latch to free footplate extension inside hanger 2 Press down on the locking buttons and adjust the footplate to the desired length Ensure that the locking buttons are completely extended adjustment and securely fastened in the adjustment holes holes 3 Fasten latch to secure footplate extension inside hanger 4 Repeat steps 1 3 for the other footplate extension Ensure that both footplate extensions are securely fastened and that minimum ground clearance is 2 1 2 inches Z WARNING The footplates lowest point should footplate extension be no closer to the ground than 2 1 2 inches to adjust length permit proper clearance A WARNING Ensure that footplates are securely clamped before occupying or operating Transport Chair button hanger gi y L IRA N RANIN BOIS CR X IRIRAN OG BAI ss LG x 4 Ooch A IRRNIROA EE N SEIKI ORIGINS N SEER URNS RII SIRS os RY ON a RIOR DERN X p IRIIRI IN ORS 6 DYO Y IRI ON Ke X EJ78X 1 INS LAB RevC13 11 5 TRANSPORTING THE TRANSPORT CHAIR PREPARING THE EJ78X 1 EJ79X 1 FOR TRANSPORT Z WARNING This Transport Chair does not o
5. Check tire wear Check wheel lock engagement Wipe off frame with soft cloth Check handgrips Check upholstery Check arms Check backposts push handles Check footrests Clean frame with soap and water Check caster stem rotation GF distributor maintenance check distributor Check caster bearings distributor List of tools The tools and cleaning supplies listed will assist in the procedures outlined in this section 30 weight oil available at most auto parts stores Phillips screwdriver soft cloth mild soap and water solution 14 EJ78X 1 INS LAB RevC13 General care Always evaluate the overall operation of your Transport Chair It should function with ease and should travel straight without excessive drag or pull to one side Remember your Graham Field authorized distributor knows your Transport Chair best when it comes to service and repairs Contact your distributor with any questions or concerns regarding the safe operation and maintenance of your Transport Chair Regular maintenance is essential for your safety and continued operation of your Transport Chair Check caster tire wear Examine caster tires at least once a week for surface wear and cracks and replace them as needed Always replace tires when they become loose on the rims or cracks appear Check wheel lock engagement Check wheel lock engagement at least once a week If a wheel lock is worn or damaged hav
6. remind the user to lean back 4 Tilt the Transport Chair backward to its balance point and move forward until the front casters pass over the top of the curb 5 Lower the front casters SLOWLY to the curb while you rotate the Transport Chair forward by the push handles until the rear casters roll up and over the curb 6 Ensure that the Transport Chair has completely cleared the curb and can not roll backward For attendant curb ascent facing backward 1 Ensure that the hand grips are securely fastened and do not turn or slip 2 Stand behind the Transport Chair holding the hand grips facing away from the curb with the rear casters against the curb 3 Advise the user that you will be tilting backward and remind the user to lean back 4 Tilt the Transport Chair back to its balance point and lift up by the push handles while pulling the Transport Chair up and over the curb DO NOT lower the front casters down until the Transport Chair is back far enough to clear the curb For attendant curb descent 1 Ensure that the hand grips are securely fastened and do not turn or slip 2 Stand behind the Transport Chair holding the hand grips with your back to the curb 3 Look over your shoulder and step down carefully 4 Hold the hand grips tightly and pull the Transport Chair until the rear casters reach the curb edge 5 Slowly roll the rear casters down onto the lower level 6 After the wheels are safely on the lowe
7. distributor immediately as a hazardous situation could result causing personal injury or damage to your Transport Chair ONLY EXCELLENT CONDITION IS ACCEPTABLE WHERE SAFETY IS CONCERNED Periodic inspection adjustment and replacement of worn parts will provide many years of superb performance WARNINGS Z WARNING The EJ78X 1 EJ79X 1 Transport Chair maximum weight capacity is 250 Ib 113 kg EVENLY DISTRIBUTED Z WARNING To avoid possible tilt hazard do not leave user unattended Attendant must always be behind and in control of Transport Chair when user is being positioned or Transport Chair is in use Z WARNING Do not operate the Transport Chair on streets or roadways Z WARNING Do not operate the Transport Chair on hilly or rough terrain sand wet or icy surfaces or surfaces with impaired traction Ensure that pathway is clear of all obstacles A WARNING Do not leave the Transport Chair on an incline Z WARNING Do not turn the Transport Chair while going downhill as the Transport Chair could tip over A WARNING Do not attempt any incline or decline greater than six degrees 10 grade or one foot of rise or fall per ten feet of ramp length Z WARNING This Transport Chair does not offer seating or occupant restraint equivalent to the seat provided in a motor vehicle To increase your safety while traveling in a motor vehicle always transfer to the vehicle seat and use the restraint provided by the vehicle man
8. E a E E E E A EA 7 aya ENN A E EAE E E A E E E A A E E T EE 7 TRANSFER ACTIVITIES cceccceeccneceeceesccneceeeceecensenneceesenseenecueseusenneeueseussensenesensseneenesens 7 FOR ATTENDANT TILTING 0ccceeccecceneceeccneceneceeseneecneceesenaseneceesenasenseeuseouseneeeessenseneeeees 8 RAMPS AND INCLINES c cceccceeccneceneceeccneceneceecenseeneceesenaseneeeeseeaseneeesseeasenseeesseuseneenees 8 CURBS AND ST EPS a raaa aaa ra a aa aaa a a a a rara a side cede ieivaneeieescdictene 8 A ADU S TIMINGS raa a a e a E EEEE rae 10 a rE E E EE EE EEE S E ES A EE E E E EE SEEE EEE 10 CROSSB Pa OA E E EE E E 10 FOOTREST DETACHABLE SWINGAWAY ccccssecsnsseeenssseeenesuenennseeenseeeennaeeenennsesenaes 11 5 TRANSPORTING THE TRANSPORT CHAIR c0ccsscccesceeceeeceescneceneceeseneeceseeseneeensseeseeaeeneeeaes 12 PREPARING THE EJ78X 1 EJ79X 1 FOR TRANSPORT cceeccseecneceeccnsecneceescceseneeees 12 6 MAINTENANCE e E E E E E E EEE A E E E E E EE E E TS 14 7 TROUBLESHOOTING 0cccecceecceecceeceecccescneceeeeeaseneceneseasensceneseasenseeueseasenneensseaseenseneseuseanseneseas 17 8 LIMITED WARRANT Y cc cccceecesceeceecneececeecnscnecnecnseusensenseuseneensensonseaseuseeseuseuseeseaseuseeennseuseesnes 18 Oy MINDDEX A AAAA T T A AEA A E A EA TE 19 GF Health Products Inc is not responsible for typographical errors All illustrations specifications packaging and warranties contained in this document are based on t
9. Everest amp Jennings EJ78X 1 EJ79X 1 Transport Chair Operation Manual EJ78X 1 INS LAB RevC13 2010 GF Health Products Inc EJ78X 1 Transport Chair user and attendant Read this manual before operating the Transport Chair Save this manual for future reference The most current version of this manual can be found online at www grahamfield com Z WARNING Transport Chair user and attendant Do not operate the Transport Chair without first reading and understanding this manual If you do not understand the warnings cautions and instructions provided herein contact your healthcare professional Graham Field authorized distributor or technical representative before proceeding with the use of this product otherwise personal injury or damage to your Transport Chair could result CONTENTS T CINTIRODUG TION r rea acide aa ara aa a aa a E a aaa AEEA TEE 3 INTENDED USE E E E A E A E EE E E E E E ETES 3 STATEMENTS OF SIGNIFICANCE j 0ccesccesccneceeeceescneceeeceaseneeeneceesenaseneceeseeasenseeeseaseneeneess 3 2 IMPORTANT SAFETY PRECAUTIONS ccsccceecesccneccneceescenecneceusecnseneceussenseneseeseueenesenaseneeneees 4 WARNINGS hess see E EE ET TETT TT E E E E E E E 4 l OPERATION a a a a aAa 6 GETTING STARTED a e E A E E E E T 6 OPERATE WHEEL LOCKS 0 1 ccssccnscneecnsccnscnnscnecenscenssnsecnsecnsensecnaeensensscnasensenssneesensensens 6 HANDEING TIPS a E E EE A E E E E EE E ER A E E E EET 7 MOZAT TIENDAN
10. S LAB RevC13 7 FOR ATTENDANT TILTING Tilting the Transport Chair backward is generally required to negotiate such obstacles as ramps inclines curbs stairs and door sills Tilting should only be performed by an attendant To tilt the Transport Chair backward 1 Grasp the push handles securely and ensure that the hand grips are firmly attached 2 Ensure that the user s feet are situated flat on the footplates and that arms hands and fingers are clear of the wheels and any other components 3 Advise the user before tilting the Transport Chair backward what you intend to do and remind the user to lean back 4 Place one foot on the tipping lever and apply downward force until the Transport Chair is tilted back enough to overcome the obstacle 5 Lower the front end slowly RAMPS AND INCLINES Z WARNING During descent the footplates lowest point should be no closer to the ground than 2 1 2 inches to permit proper clearance Z WARNING Do not attempt any incline or decline of more than 6 degrees 10 grade or one foot of rise or fall per ten feet of ramp length Z WARNING Do not use wheel locks to slow your descent Attempting to use wheel locks is likely to result in accidental locking that could cause the Transport Chair to stop abruptly suddenly pitch forward or tip sideways Z WARNING Avoid changing direction while descending a ramp or incline as this could cause instability Ramps and inclines shoul
11. USE DOWNTIME COVER OR EMPLOYEE OR INDEPENDENT CONTRACTOR WAGES PAYMENTS AND BENEFITS The warranties contained herein contain all the representations and warranties with respect to the subject matter of this document and supersede all prior negotiations agreements and understandings with respect thereto The recipient of this document hereby acknowledges and represents that it has not relied on any representation assertion guarantee warranty collateral contract or other assurance except those set out in this document For additional information on this product or this warranty please contact a GF Customer Service Representative NOTES 1 Additional terms and conditions may apply 2 Freight claims must be notated on the Bill of Lading and must be made with immediacy The ICC regulations govern specific requirements for freight claims Failure to abide by those regulations may result in a denial of the freight claim GF will assist you in filing the freight claim 3 Claims for any short shipment must be made within thirty 80 days of the invoice date GF Health Products Inc 2935 Northeast Parkway Atlanta GA 30360 Tel 770 368 4700 Fax 770 368 2386 www grahamfield com 18 EJ78X 1 INS LAB RevC13 9 INDEX A Adjustments 10 Backposts check 15 Balance 7 C Caster stems front check 16 CAUTION statement significance 3 Cleaning your Transport Chair 16 Crossbraces adjust 10 Curb ascent facing backward for atten
12. ain consult your professional medical advisors for their recommendations about safety methods and never hesitate to ask for their assistance Your Transport Chair should receive frequent regularly scheduled maintenance including an inspection of the mechanical parts to ensure proper operation Some suggested inspection procedures troubleshooting procedures and adjustment procedures are included in this manual When it comes to service and repair remember that your Graham Field authorized distributor knows your Transport Chair best The person performing adjustments on the Transport Chair has the responsibility of making certain that the user can safely operate the Transport Chair with the adjustments selected This person must evaluate the user s ability weight physical condition the environment in which the Transport Chair will be used and the terrain over which the Transport Chair will travel INTENDED USE The EJ78X 1 EJ79X 1 Transport Chair is a manual folding lightweight Transport Chair suitable for frequent users with a maximum weight capacity of 250 lb 113 kg who require a lightweight portable Transport Chair fitted to their anatomy without the need of customization or alteration to the center of gravity The EJ78X 1 EJ79X 1 Transport Chair is intended for indoor and or outdoor use The Transport Chair is intended to be propelled by an attendant at all times who should remain behind the Transport Chair when the user i
13. d only be negotiated with the assistance of an attendant To attendant Practice with a healthcare professional first before attempting ramps or inclines Always inspect the ramp for hazards such as holes slippery or uneven surfaces etc before starting up or down If you can not see the entire ramp ask someone to inspect it for you CURBS AND STEPS Z WARNING Never attempt to negotiate curbs or steps in your Transport Chair without the assistance of an attendant Z WARNING Never attempt to negotiate stairs or escalators in your Transport Chair under any circumstances Curbs steps and stairways are dangerous obstacles that confront the Transport Chair user When you encounter curbs find a way around or use the ramps now available in most locations If you encounter stairs or escalators and there is no ramp available avoid the stairs or escalators by utilizing the disabled designated elevators now required in most locations Curbs and steps should only be negotiated with the assistance of an attendant The following are suggestions only for curb negotiation It is important for you to develop your own safe technique that is best suited to your abilities 8 EJ78X 1 INS LAB RevC13 For attendant curb ascent facing forward 1 Ensure that the hand grips are securely fastened and do not turn or slip 2 Stand behind the Transport Chair holding the hand grips facing the curb 3 Advise the user that you will be tilting backward and
14. dant 9 Curb ascent facing forward for attendant 9 Curb descent for attendant 9 Curbs and steps negotiating 8 E EJ78X 1 EJ79X 1 maximum weight capacity 4 EJ78X 1 EJ79X 1 Transport Chair illustration 6 F Footplate extension length adjust 11 Footrest attach 11 Footrest remove 11 Footrests check 16 H Handling tips to attendant 7 l Info statement significance 3 Introduction 3 L Limited warranty 18 Maintenance 14 N NOTICE statement significance 3 O Operation 6 R Ramps and Inclines 8 S Safety precautions 4 T Tire caster check 15 Transfer activities 7 Transporting the Transport Chair 12 Troubleshooting 17 EJ78X 1 INS LAB RevC13 U Upholstery and carrying handles check 15 WwW Warnings 4 WARNING statement significance 3 Warranty limited 18 Wheel bearings check 16 Wheel locks operate 6 19 Everest amp Jennings Manufactured for GF Health Products Inc 2935 Northeast Parkway Atlanta Georgia 30360 U S A telephone 770 368 4700 fax 770 368 2386 GRAHAM FIELD www grahamfield com Made in China
15. djusting the stem nut varies the amount of force required to turn the caster If the nut is too loose the caster will flutter or shimmy if the nut is too tight the Transport Chair will be difficult to steer If the front caster stems requires adjustment or any caster bearings require replacement contact your Graham Field authorized distributor Ensure that stems are firmly attached to forks and that forks and stems are not bent Evaluate all threads locking nuts and bearings Check caster bearings Have your Graham Field authorized distributor check front and rear caster bearings at least every six months 16 EJ78X 1 INS LAB RevC13 7 TROUBLESHOOTING Continual use of your Transport Chair necessitates maintenance especially if the factory set adjustments have been altered The following troubleshooting guide lists several common problems that may occur and offers corrective actions for each If you are unsure of the solution or unable to diagnose the problem do not hesitate to ask your Graham Field authorized distributor for assistance Mi o PROBABLE CAUSE AND CORRECTIVE ACTION Viviviv Nuts and or bolts may be loose If so tighten Bolts should be snug v v v Casters or stem s may be adjusted improperly Have your GF distributor correct adjustment Info Use only Everest amp Jennings replacement parts A Transport Chair replacement parts list is available at www grahamfield com to assist in the ordering of parts
16. duct 3 Products considered to be of a non durable nature including but not limited to casters filters fuses gaskets lubricants and charts 4 Accessories or parts not provided by GF 5 Charges by anyone for adjustments repairs replacement parts installation or other work performed upon or in connection with such products which are not expressly authorized in writing in advance by GF 6 Any labor or shipping charges incurred in the replacement part installation or repair 7 Costs and expenses of regular maintenance and cleaning and 8 Representations and warranties made by any person or entity other than GF ENTIRE WARRANTY EXCLUSIVE REMEDY AND CONSEQUENTIAL DAMAGES DISCLAIMER THIS WARRANTY IS GF S ONLY WARRANTY AND IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED GF MAKES NO IMPLIED WARRANTIES OF ANY KIND INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IF ANY MODEL OR SAMPLE WAS SHOWN TO THE CUSTOMER SUCH MODEL OR SAMPLE WAS USED MERELY TO ILLUSTRATE THE GENERAL TYPE AND QUALITY OF THE PRODUCT AND NOT TO REPRESENT THAT THE PRODUCT WOULD NECESSARILY CONFORM TO THE MODEL OR SAMPLE IN ALL RESPECTS THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PARTS GF SHALL NOT BE LIABLE FOR AND HEREBY DISCLAIMS ANY DIRECT SPECIAL INDIRECT INCIDENTAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS OF PROFITS OR INCOME LOSS OF
17. e your Graham Field authorized distributor replace it immediately Inspect the hardware for looseness or signs of wear Ensure that the locking mechanism operates smoothly The locking assembly should be tight enough so that the wheel can not rotate or the lock slip Check that the locking shoe does not press against the tire when in the unlocked position Excessive force should not be required to either engage or release wheel locks Oil the wheel lock pivot points with one or two drops of 30 weight oil Remove excess oil and dirt Check hand grips Check hand grips at least once a week Ensure that they are not ripped Ensure that they are tight and securely fastened Check upholstery and carrying handles Check upholstery and carrying handles at least once a month Inspect for rips tears and worn spots Ensure that all upholstery attaching and carrying handle attaching screws are present properly aligned and well secured Use a Phillips screwdriver to tighten mounting screws Check attaching screws for sharp edges or stripped screws and replace if found Z WARNING Worn or torn upholstery or upholstery with loose hardware must be replaced immediately It may not support body weight Check arms Check arms at least once a month Inspect for sharp edges or cracks which could weaken the arm and replace if found Use a Phillips screwdriver to tighten arm pad mounting screws Check for burrs on the screw heads and replace if found Ensu
18. eat 1 Move the car s front seat as far forward as possible 2 Holding the folded Transport Chair by the carrying straps lift it into the car and place it on the back seat floorboard Stow the footrests alongside DO NOT put any articles on top of the Transport Chair Ensure the Transport Chair is stable will not shift while the car is in motion and does not block the driver s field of vision Store Transport Chair in car s trunk 1 Holding the folded Transport Chair by the carrying straps lift it and carefully place it in the trunk Stow the footrests alongside 2 DO NOT put any articles on top of the Transport Chair Close the trunk lid slowly Unfold the Transport Chair see picture on previous page 1 Push down on the seat rails until the seat is completely open 2 Unfold the back Raise upper back until it locks into place ensure that upper back is locked into place before proceeding 3 Install footrests A WARNING Ensure Transport Chair is unfolded as instructed and that upper back is locked into place seat is completely open and footrests are locked in place before occupying or operating Transport Chair EJ78X 1 INS LAB RevC13 13 6 MAINTENANCE Protect your E amp J Transport Chair by having it serviced regularly Proper care and maintenance are essential to keep your Transport Chair in safe working condition Periodic inspection adjustment and replacement of worn parts will provide many years of superb pe
19. ffer seating or occupant restraint equivalent to the seat provided in a motor vehicle To increase your safety while traveling in a motor vehicle always transfer to the vehicle seat and use the restraint provided by the vehicle manufacturer When transporting the Transport Chair in a motor vehicle do not place the Transport Chair where it will interfere with the safe operation of the vehicle or endanger the driver or passengers The front seat is not a good location to store a Transport Chair during transport as the Transport Chair can be dislodged and become a serious hazard to the vehicle driver Always take precautions to avoid personal injury when loading or lifting a Transport Chair into or out of a vehicle The Transport Chair can easily be transported in the back seat or the trunk WA lt 4 upper back hand grip push handle seat upholstery center front E upper back release P paddle handle lt a lower back seat rail Fold the Transport Chair see picture above 1 Detach footrests from Transport Chair 2 Fold the back Press the upper back release paddles handles toward the upper back until the back releases then lower the upper back 3 Fold the Transport Chair Pull up sharply on the seat upholstery at front and rear center at the same time Tip the Transport Chair sideways so the opposite wheel won t drag Press sides together 12 EJ78X 1 INS LAB RevC13 Store Transport Chair in car s back s
20. he latest product information available at the time of printing The most current product information including the most current revision of this manual can be found online at www grahamfield com Graham Field Everest amp Jennings and E amp J are registered trademarks of GF Health Products Inc 2 EJ78X 1 INS LAB RevC13 1 INTRODUCTION Thank you for choosing an Everest amp Jennings product We at GF Health Products Inc Graham Field wish to assure you of our continuing commitment to provide innovation quality and reliability in our products Important safety operating and maintenance instructions that warrant the attention of both user and attendant are included in this operation manual Read the entire manual carefully before operating your new Transport Chair keep it handy for future reference and refer to it as often as necessary to help maintain good performance standards Consult your healthcare professional and Graham Field authorized distributor for assistance in developing and learning safe and effective techniques for performing your daily activities according to your individual physical abilities and needs and to make certain that your Transport Chair is properly prescribed and adjusted for your use The safety precautions in this manual are general warnings intended to be used only as basic guidelines You may find it necessary to develop your own methods for safely solving frequently encountered challenges Ag
21. n the applicable warranty period and which upon examination by GF or its authorized representative prove to be a warranty item This limited warranty is not transferable The warranted components and time period are set forth below Sideframes and crossbraces 00ee00 one year All other durable components not listed above three months The applicable warranty period shall commence from date of shipment to the original customer unless there is an expiration date on the component in which case the warranty shall expire on the earlier of warranty period or the expiration date OBTAINING WARRANTY SERVICE A GF Customer Service Representative must authorize warranty service Please contact the GF Customer Service department by calling 678 291 3207 sending a fax request to 770 368 2386 or by e mailing a request to cs grahamfield com Specific directions will be provided by the Customer Service Representative Failure to abide by the specific directions will result in denial of the warranty claim EXCLUSIONS The warranty does not cover and GF shall not be liable for the following 1 Defects damage or other conditions caused in whole or in part by misuse abuse negligence alteration accident freight damage tampering or failure to seek and obtain repair or replacement in a timely manner 2 Products which are not installed used or properly cleaned and maintained as required in the official manual for the applicable pro
22. ng straps to lift the unoccupied Transport Chair BALANCE Proper balance is the key to maintaining the stability of your Transport Chair Reaching bending and transferring to or from a Transport Chair will change your weight distribution and center of gravity Have an attendant with you at all times especially when reaching bending or transferring Use the Transport Chair s positioning belt at all times to maintain proper weight distribution and ensure that the positioning belt is properly adjusted TRANSFER ACTIVITIES A WARNING Always ensure that the Transport Chair is on a stable level surface and engage the wheel locks before transfer Z WARNING Do not step on the footplates this could cause the Transport Chair to tip Fold them up and either detach them or swing them aside Z WARNING There is a critical moment when there is little or no seat platform beneath you Take every precaution to reduce this unsupported distance before you attempt transfer Transferring into or out of a Transport Chair is a very difficult maneuver exercise extreme care when transferring and never transfer without the aid of an attendant Consult your physician nurse or physical therapist for assistance in developing your individual technique Make sure that the Transport Chair is stabilized and will not move or slide during the transfer Take extra precaution to prevent tipping Use good body mechanics to prevent personal injury EJ78X 1 IN
23. r level advise the user that you will be tilting backward and remind the user to lean back 7 Tilt the Transport Chair back to its balance point this will lift the front casters off the curb Take several small steps backward until the front casters have cleared the curb 8 Turn the Transport Chair around place one foot on the tipping lever and gradually lower the front casters to the ground EJ78X 1 INS LAB RevC13 9 4 ADJUSTMENTS The Transport Chair offers several adjustments to make it easier and more comfortable to operate Section 6 MAINTENANCE offers preventive maintenance suggestions for keeping your Transport Chair in excellent condition ensure that all components are in excellent condition before adjusting The following are recommended methods after a few adjustments you may develop your own Always consult your Graham Field authorized distributor for assistance The person performing adjustments on the Transport Chair has the responsibility of making certain that the user and attendant can safely operate the Transport Chair with the adjustments selected This person must evaluate the user s ability weight physical condition the environment in which the Transport Chair will be used and the terrain over which the Transport Chair will travel All adjustments and their page locations are referenced in the index at the end of this manual Specific tools needed to perform each adjustment are identified in adjustment direc
24. re that screws do not extend into the padding Check backposts push handles Check backposts at least once a month Ensure that all mounting hardware is securely fastened and that the backposts are not bent or damaged Ensure that back folding mechanisms are secure work correctly and that there is no play in back fold points Contact your Graham Field authorized distributor if you observe back play cracking or peeling paint or plating EJ78X 1 INS LAB RevC13 15 Check footrests Check footrests at least once a month Inspect the locking mechanisms to confirm sure fit Check for cracks burrs or sharp edges and replace if found Ensure that the footrest will automatically lock securely in place and will not accidentally unlock Cleaning your Transport Chair Wipe off frame frequently at least once a week using a soft cloth Dry the Transport Chair immediately if exposed to moisture Clean the frame every three months with a mild soap and water solution The frame does not need to be waxed Do not use solvents abrasive waxes caustic chemicals or spray silicone Never use abrasive cleansers they could scratch the finish Never use steam or high pressure cleaners Clean upholstery and plastic components at least once a month with a mild soap and water solution Check front caster stems Check front caster stems for proper rotation at least every three months Front caster forks must swivel freely to facilitate steering and handling A
25. rformance When you believe that a component or part of your Transport Chair is not functioning properly contact your Graham Field authorized distributor immediately as a potentially hazardous condition could result Only excellent condition is acceptable where safety is concerned Service manual There is no service manual for the Transport Chair Please contact your Graham Field authorized distributor with service questions not answered by this manual Info We recommend that you have a Graham Field authorized distributor perform a six month maintenance check as the distributor may find and correct a problem which might otherwise go undetected and eventually cause more serious problems and or personal injury Do it yourself maintenance You can do many of the scheduled maintenance tasks yourself if you have mechanical ability and a few basic tools Refer to the maintenance schedule below for the recommended regularity of each procedure If any maintenance procedure is not clear to you ask your Graham Field authorized distributor for assistance A NOTICE Improper maintenance can cause operating problem and may affect your warranty Z WARNING Unauthorized modification or the use of non Everest amp Jennings replacement parts could change the structure of the Transport Chair void the warranty and create a hazardous condition resulting in serious personal injury MAINTENANCE SCHEDULE Procedure Perform at least every 3 Months
26. s being positioned or the Transport Chair is in use STATEMENTS OF SIGNIFICANCE Please note the following special statements used throughout this manual and their significance A WARNING Indicates a potential hazard situation or unsafe practice that if not avoided could result in death or serious injury Z CAUTION Indicates a potential hazard or unsafe practice that if not avoided could result in minor or moderate personal injury A NOTICE Indicates a potential hazard or unsafe practice that if not avoided could result in product or property damage Info Provides application recommendations or other useful information to ensure that you get the most from your product EJ78X 1 INS LAB RevC13 3 2 IMPORTANT SAFETY PRECAUTIONS IMPORTANT SAFETY PRECAUTIONS ALWAYS FOLLOW THESE SAFETY PRECAUTIONS WHEN USING YOUR TRANSPORT CHAIR FAILURE TO DO SO COULD RESULT IN PERSONAL INJURY TO YOU OR OTHERS OR DAMAGE TO YOUR TRANSPORT CHAIR Safety requires the constant attention of the Transport Chair user and the attendant It is extremely important to learn and always use safe methods of performing basic daily activities Always consult your healthcare professional to determine those methods most suitable for your individual abilities Protect yourself and your Transport Chair by having your Transport Chair serviced regularly Whenever any part of your Transport Chair is not functioning properly contact your Graham Field authorized
27. s that you are comfortable with and consult your medical professionals for assistance in developing the skills and proper techniques to perform all activities safely TO ATTENDANT Z WARNING To avoid possible tilt hazard do not leave user unattended Attendant must always be behind and in control of Transport Chair when user is being positioned or Transport Chair is in use 1 Work with the Transport Chair user s medical professionals to learn the best methods of assistance 2 Always tell the Transport Chair user what you are about to do and what you expect them to do especially when changing balance or tipping backward Remind the Transport Chair user to lean back when tipping backward to maintain proper weight distribution 3 When assisting a Transport Chair user always perform operations carefully and use good body mechanics bend your knees slightly and keep your back as upright as possible to prevent personal injury A WARNING Ensure that hand grips are firmly attached to push handles before assisting user with Transport Chair Slippage of hand grips could cause personal injury or Transport Chair damage If hand grips are loose or in unstable condition contact your Graham Field authorized distributor for repair before assisting user with Transport Chair A WARNING Do not lift the Transport Chair by any detachable parts this could cause personal injury to attendant or user and damage to the Transport Chair Use the carryi
28. tions Most of the following adjustments can be performed with the wrench and hex key included with your Transport Chair CASTERS We recommend that you do not replace or adjust front or rear caster components yourself since special tools and training are required Please contact your Graham Field authorized distributor when your casters need adjustment CROSSBRACE Tighten crossbraces Tools required included wrench and hex key Check the crossbraces to ensure that the bolts and nuts that fasten the crossbraces in the center of the Transport Chair are secure crossbraces should be loose enough to fold easily yet snug enough to take up excess play Use the included tools to tighten the crossbraces 10 EJ78X 1 INS LAB RevC13 FOOTREST DETACHABLE SWINGAWAY Z WARNING Do not stand on the footplates this could cause the Transport Chair to tip Remove footrest for transfer see picture at right 1 Pull swingaway release lever toward front of Transport Chair and swing footrest outward 2 Lift footrest straight up off Transport Chair hinge pins Attach footrest see picture at right 1 Set footrest on outside of Transport Chair so that footrest hinge plates engage Transport Chair hinge pins 2 Swing footrest inward until release lever locks into place Ensure that swingaway release lever is locked in place Z WARNING Ensure that footrests are locked in place before occupying or operating Transport Chair remove footrest
29. ufacturer Z WARNING Do not tie down or attach anything to the wheels This could cause tipping and possibly result in injury or damage to the Transport Chair A WARNING The footplates lowest point should clear the ground by at least 2 1 2 inches to permit proper clearance of potential obstruction Z WARNING Doing a wheelie tilting the Transport Chair backward until it reaches its balance point is dangerous and could result in personal injury to the user Z WARNING Do not stand or step on the footplates while transferring to or from your Transport Chair This could cause the Transport Chair to tip or could cause personal injury or damage to your Transport Chair Z WARNING Always engage wheel locks before transferring using a wheelchair lift or using an elevator A WARNING Ensure that Transport Chair is on a stable level surface and engage wheel locks before and during transfer 4 EJ78X 1 INS LAB RevC13 Z WARNING Do not lean over the top of the Transport Chair back This could cause the Transport Chair to tip over Z WARNING To reduce the risk of tipping before leaning or reaching forward sit back in the seat and rotate front casters fully toward front of Transport Chair Z WARNING Unauthorized modification or the use of non Everest amp Jennings replacement parts could change the structure of the Transport Chair void the warranty and create a hazardous condition resulting in serious personal injury
Download Pdf Manuals
Related Search