Dimplex DTR175C User's Manual
Contents
1. X Dimplex Installation and Operating Instructions DTR Towel Rails 08 50116 1 UK Issue 1 Models DTR175W DTR175C DTR350W amp DTR350C Dimensions millimetres DTR 350 Fig 1 IMPORTANT THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE Table1 Model Rails Watts Weight kg DTR175 W C 12 175 4 4 DTR350 W C 18 350 7 9 Important Safety Advice WARNING THE SURFACE OF THIS RADIATOR CAN BE HOT In order to be effective the towel rail will get hot however momentary contact with any part of it should not cause injury CAUTION This appliance is not intended for use by chidren or other persons without assistance or supervision if their physical sensory or mental capabilities prevent them from using it safely Children should be supervised to ensure that they do not play with the appliance Precautions should be taken to ensure that prolonged contact with the towel rail cannot occur Particular care should be taken in confined areas where accidental prolonged contact with the rail could be more likely to occur This appliance should only be used to dry fabrics washed in water using commonly available detergents IMPORTANT If the towel rail is to be installed in a place used by the public a warning notice should be placed adjacent to the rail advising that the surface can be hot WARNING In order to avoid a hazard for very young children this appliance should be2. installed so that the lowest heated rail is at least 600mm above the floor General The DTR towel rail is designed to provide an all year round service for airing towels and articles of clothing It is not intended to provide a sole heating service but the larger model will take the chill off an average size bathroom lavatory or en suite Your rail will be in one of two sizes and will have either silver chromium plated or white stove enamel finish No routine maintenance is necessary apart from occasional cleaning Both models are splashproof to IPX4 standard Electrical The electrical installation of this towel rail must be carried out by a competent electrician in accordance with the current I E E Regulations for Electrical Equipment The towel rail is suitable for use on an A C electrical supply Before installation check that the supply voltage corresponds with that marked on the rail IMPORTANT The wires in the mains lead are coloured in accordance with the following code BLUE NEUTRAL BROWN LIVE This appliance must only be used on A C mains supply of 230 240 Volts Installation If fitted in a room containing a bath or shower to comply with the current E E Regulations a cable outlet will be necessary with the supply to the heater controlled by a double pole pull cord switch having a contact separation of 3mm in each pole The body of the switch should be situated as to be normally inaccessible to a per
3. amp towels or clothes on the towel rail when not in use as this may in time affect the paint finish The rail although hot to the touch is not hot enough to scorch or burn fabrics However soap and detergents remaining in articles after washing can cause discoloration Therefore care should be taken to thoroughly rinse articles before airing Wiring Wiring Diagrams for DTR175 see Fig 6 and DTR350 see Fig 7 TO Tom mO 0m Terminal Block Cut out 1 Cut out 2 DTR 350 Terminal Block Cut out 1 Cut out 2 Operation Electrical Heat will be distributed along each of the rails Some variation in the temperature across the surface of the rail is also normal When the appliance is covered the heating pattern of the rails may alter slightly Cleaning The finish on your towel rail can be maintained by occasionally wiping over with a damp cloth and lightly finishing with a soft dry cloth This should only be carried out when the rail is cold Do not use abrasive cleaning powders as this could damage the surface finish Recycling For electrical products sold within the European Community At the end of the electrical products useful life it should not be disposed of with household waste Please recycle where facilities exist Check with your Local Authority or retailer for recycling advice in your country After Sales Service Your product is guaranteed for two years from the date of purchase Within this p
4. d Material contained in this publication may not be reproduced in whole or in part without prior permission in writing of Dimplex UK Limited
5. eriod we undertake to repair or exchange this product free of charge subject to availabilitiy provided it has been installed and operated in accordance with these instructions Your rights under this guarantee are additional to your statutory rights which in turn are not affected by this guarantee Should you require after sales service you should contact our customer services help desk on 0845 600 5111 It would assist us if you can quote the model number series date of purchase and nature of the fault at the time of your call The customer services help desk will also be able to advise you should you need to purchase any spares Please do not return a faulty product to us in the first instance as this may result in loss or damage and delay in providing you with a satisfactory service Please retain your receipt as proof of purchase C The product complies with the European Safety Standards EN60335 2 30 and the European Standard Electromagnetic Compatibility EMC EN55014 EN60555 2 and EN60555 3 which cover the essential requirements of EEC Directives 73 23 and 89 336 Dimplex UK Limited UK customer help line 8 00am 5 00pm Mon Fri and 8 30am 1 00pm Sat October March Millbrook House Grange Drive Hedge End Southampton Hampshire SO30 2DF Republic of Ireland c Dimplex UK Limited Technical Services Tel 0845 600 5111 Fax 01489 773053 e mail technical services dimplex co uk Tel 01 8424833 All rights reserve
6. son using a bath or shower Should Equipotential Earth Bonding be required the earthing conductor in the supply cord is deemed to provide the supplementary bonding connection see Regulation 547 03 0 16th Edition I E E Wiring Regulations IMPORTANT Protect the electrical connection whilst handling the towel rail The towel rail must be permanently fixed to the wall using the wall brackets supplied The rail must be mounted vertically as shown observing the minimum clearances stated WARNING The towel rail is heavy Care must be taken when lifting and fitting the towel rail Wall mounting The wall mounting accessory pack contains a 4 mounting brackets b 1 allen key c 4 wall mounting screws washers and wall plugs d 4 hex stud screws Procedure for wall mounting Step 1 g o I 7 B 6 e a e esa Poe ee DTR 175 250 390 DTR 350 380 625 Fig 2 Mark suitable hole positions for the four fixing brackets ensuring they are horizontal see Fig 2 and allow enough room above and below for the clearance stated Drill and plug the wall to suit see Fig 3 Fig 3 Step 2 The hex stud screw in the slot has to be removed using the allen key provided first to separate the inner Z and outer W sleeves of the wall brackets see Fig 4 E Fig 4 Mount the four outer sleeve wall brackets in line with the drilled out holes using the screws provided see s
7. teps 1 4 in Fig 3 Note the brackets have slot holes to allow for possible adjustment later Step 3 X Remove the cap Y from the inner sleeve assembly unscrew the nut and remove the rail support X see Fig 5 On the inner side wall of the towel rail position the inner sleeve between the cross rails as indicated in Fig 1 Position the rail support to receive the bolt on the inner sleeve and hand tighten with the nut see Fig 3 Slide into position see suggested positions in Fig 1 Fig 5 Step 4 Lift the towel rail now with the inner sleeve assembly in position and align with the outer sleeve previously fixed to the wall When all four inner sleeves are inserted correctly into the outer sleeves of the brackets tighten each nut fully Replace the cap Y and the hex stud screw The distance the towel rail can be positioned from the wall can be varied by adjusting the hex stud screws When in the desired location tighten fully to secure the towel rail to the wall To assist with the alignment of the outer W and inner Z sleeves the outer sleeve may be adjusted using the slot provided refer to Note in step 2 Drying and Airing Towels It is recommended that for efficient drying no more than two layers of towels or similar fabric should be draped over the rail Items should be placed evenly over the whole surface of the rail where possible It is not advisable to leave very d
Download Pdf Manuals
Related Search