DigiPower TC-1000 User's Manual
Contents
1. ds the LCD will turn off Typical charge time is 1 hour for batteries up to 900mAh NOTE The charger or battery may become warm when charging This is normal Maintenance Use a clean DRY cloth when necessary to keep the metal contacts of both charger and battery clean Remove from power outlet before cleaning LIMITED WARRANTY This product carries a full one year warranty from date of purchase against defects in materials and workmanship This warranty does not cover damage resulting from accidents misuse unauthorized repair alternations to the product or failure to follow operating instructions Visit our web site www digipowersolutions com email cs digipowersolutions com2. eed ait Operating Instructions for Travel Charger Item TC 1000 RTC 1000 VTC1000 PLEASE READ THE INFORMATION AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT IMPORTANT WARNING This CHARGER is for charging rechargeable Li lon digital camera and camcorder batteries ONLY Attempting to charge any other batteries may damage the device destroy the batteries and or cause injury to the user Charging other batteries will void the warranty CAUTIONS Always unplug the charger when not in use Do not store place or use the charger where it could come into contact with water or moisture Always replace frayed or damaged wire and broken plugs immediately To reduce the risk of electric shock unplug your charger from the wall outlet before cleaning Do not open or disassemble the charger unit OPERATING INSTRUCTIONS BEFORE USING THE CHARGER IT IS IMPORTANT TO GET FAMILIAR WITH THE INTERNATIONAL PLUG MECHANISM FOR USE IN USA 1 Lift the plug from stored position until it locks in a 90 degrees position 2 Plug directly into a wall outlet or Power strip FOR USE IN EUROPE USA PLUG REMAINS IN STORED POSITION Remove European plug adaptor by lifting up and out of stored position Slide the EU plug into the stored US plug Plug directly into a wall outlet or Power strip NS DIGIPOWER The TC1000 charger is designed to work with changeable battery plates to fit and charge various Li lon digital camera and camc
3. order batteries Each TC 1000 is packaged with battery plates to fit the different battery models from the same camera manufacturer CHOSING THE CORRECT BATTERY PLATE 1 Find the Plate labeled with the battery model for you camera Battery plates are inscribed with the OEM battery as well as the DigiPower battery The battery model can be found on the battery label or check the camera instruction manual 2 Attach the battery plate by sliding it on to the Base Charger Contacts on the Plate should slide towards the LED at the bottom of the charger 3 Slide the battery on to the cradle matching the battery terminals with the Plate contacts DIGIPOMER by Replaces NE AL amp Rachargeable Lion 3 7 11 20m a em A BPA SL i 1 kim F BPN al n _ _ DIGIPOWERE Operating instructions 1 while the battery is on the charger connect the base charger to a power source The LCD panel will light up The LCD s charge indicator bars will begin to appear to show the battery charge level The bars will begin to blink at start of each charging level Less than 25 capacity the 1 25 bar will blink Less than 50 capacity the 2 50 bar will blink Less than 75 capacity the 3 75 bar will blink Less than 100 capacity the 4th 100 bar will blink When the battery is fully charged all four bars will light but stop blinking and a beeping alarm will sound After 75 secon
Download Pdf Manuals
Related Search