Home

Denon AVR-2805 User's Manual

1. 1 News Rock Music Phone In Current Affairs Easy Listening Travel Music Information Light Classical Leisure Serious l Sports E Jazz Music Education Other Music Country Music Drama Weather National Music Culture Finance Oldies Music Science Children s Folk Music programmes Varied Social Affairs Documentary Pop Music Religion E Traffic Program TP TP identifies programs that carry traffic announcements This allows you to easily find out the latest traffic conditions in your area before you leaving home 3 E Radio Text RT RT allows the RDS station to send text messages that appear on the display NOTE The operations described below using the RDS PTY and RT buttons will not function in areas in which there are no RDS broadcasts 50 Set the input function to TUNER TUNER Remote control unit RDS Press the RDS button until RDS SEARCH appears on RETU the display Remote control unit x The main unit s display switches as follows each time the RDS buttons are pressed Display RDS Search New tuning system for your convenience 1 Push RDS PTY Program category P Traffic info RT Radio Text 2 Tune by preset This is the screen when operated CHANNEL Press the CHANNEL UP or DOWN button to automatically begin the RDS search operation Remote control unit
2. Remove the vinyl tie 75 Q ohms and take out the Bend in the reverse COANE direction CABLE E Pra With the ibe T antenna on uT Ss top any elle O Gin stable 33 surface e OI With the antenna attached to AM OUTDOOR a wall ANTENNA o SPEAKER IMPEDANCE Zoe Installation hole Mount a wall SE FM INDOOR ANTENNA GROUND Connection of AM antennas Supplied 1 Push the 2 Insert the 3 Return the lever conductor lever e An F type FM antenna cable plug can be connected directly Di am cl gt Notes e Do not connect two FM antennas simultaneously e Even if an external AM antenna is used do not disconnect the AM loop antenna e Make sure AM loop antenna lead terminals do not touch metal parts of the panel Connecting the external input EXT IN jacks e These jacks are for inputting multi channel audio signals from an outboard decoder or a component with a different type of multi channel decoder such as a DVD Audio player a multi channel SACD player or other future multi channel sound format decoder e When making connections also refer to the operating instructions of the other components SIGNAL GND N N V a x g e Ee Ou S ao y wi oO ke alot CR CR O Si Ei CO D ELPorcieti
3. When Surround Back is selected When Zone2 is selected Enter the setting The Option Setup Menu reappear 25 ENGLISH 5 2 Setting the Zone2 Vol Level 5 3 5 4 Setting the Trigger Out Setup Set the Zone2 pre out output level adjustment e There are two 12V DC Trigger Out outputs on the rear panel that can be used to control other devices with compatible trigger inputs e Set the Trigger Out output 1 for the different input sources 1 Gett At the Option Setup Menu select Zone Vol Level 5 Option Setup Remote control unit 1 Power Amp Assign teks 2 Zone2 Vol Level Select Trigger Out 1 Setup at the Option Setup Menu 5 Option Setup 3 Trigger Out 1 Setup 4 Trigger Out 2 Setup UC Power Amp Assign 5 Muting Level ECH Zone2 Vol Level 6 i R3 Trigger Out 1 Setup 7 Trigger Out 2 Setup E 1 2 On Screen Display 3 4 5 Muting Level 6 7 E Setup Lock xit Remote control unit On Screen Display Setup Lock xit Display the Zone2 Vol Level screen Display to the Trigger Out 1 Setup screen 5 3 Trigger Out 1 Setup GZONE MAIN gt Remote control unit PHONO T co DBs UNER CRA TAPE VCR 3 Not Select the desired setting A Lonea Wels Level Pe cd Variable VP De fau I kel Remote control unit The level can be adjusted freely u
4. Movement of acoustic image from SR to SL Movement of acoustic image from SR to SB to SL With this set soeaker s for 1 or 2 channels are required to achieve a 6 1 channel system DTS ES etc Adding these speakers however increases the surround effect not only with sources recorded in 6 1 channels but also with conventional 2 to 5 1 channel sources The WIDE SCREEN mode is a mode for achieving surround sound with up to 7 1 channels using surround back speakers for sources recorded in conventional Dolby Surround as well as Dolby Digital 5 1 channel and DTS Surround 5 1 channel sources Furthermore all the DENON original surround modes see page 45 are compatible with 7 1 channel playback so you can enjoy 7 1 channel sound with any signal source E Number of surround back speakers Though the surround back channel only consists of 1 channel of playback signals for 6 1 channel sources DTS ES etc we recommend using two speakers When using speakers with dipolar characteristics in particular it is essential to use two speakers Using two speakers results in a smoother blend with the sound of the surround channels and better sound positioning of the surround back channel when listening from a position other than the center E Placement of the surround left and right channels when using surround back speakers Using surround back speakers greatly improves the positioning of the sound at the rear Because of this the surround left and
5. 2 CAUTIONS ON INSTALLATION Noise or disturbance of the picture may be generated if this unit or any other electronic equipment using microprocessors is used near a tuner or TV If this happens take the following steps e Install this unit as far as possible from the tuner or TV e Set the antenna wires from the tuner or TV away from this unit s power cord and input output connection cords e Noise or disturbance tends to occur particularly when using indoor antennas or 300 Q ohms feeder wires We recommend using outdoor antennas and 75 Q ohms coaxial cables For heat dispersal leave at least 10 cm of space between the top back and sides of this unit and the wall or other components 3 CAUTIONS ON HANDLING e Switching the input function when input jacks are not connected A clicking noise may be produced if the input function is switched when nothing is connected to the input jacks If this happens either turn down the MASTER VOLUME control or connect components to the input jacks e Muting of PRE OUT jacks HEADPHONE jack and SPEAKER terminals The PRE OUT jacks HEADPHONE jack and SPEAKER terminals include a muting circuit Because of this the output signals are greatly reduced for several seconds after the power switch Ue Xx 10 cm or more Oo0o0000000 eege OO Le wy 10 cm or more Wall is turned on or input function Surround mod
6. CTL OO Ch ORO gt LI U Q OE PURE DIRECT DIRECT STEREO 2 vg Fed B 23 p Sg Si Ei 2 Q Q Q S SURROUND PARAMETER onscreen NA FRONT SURROUND cat GE CD CT e Cou aoe Gau Cox USE LEARN O DENON RC 975 DISPLAY 3 Video deck VCR system buttons 4 Monitor TV TV digital broadcast satellite DBS tuner and cable CABLE system buttons POWER Power on standby OFF ON SOURCE O N SOU RCE OFF ON SOURCE LEARNED TX LEARNED TX O 0 Channel Channels O S ZONE 2 ZONE LIMAIN gt Play ZONE 2 e MAN EE E H Stop zolee lt lt gt gt Manual search forward and reverse EDC Gen CD TAPE Ga Gelee Gm CS TAPE Gan CABLE VDP CABLE VDP W P MODE MEMORY BAND SHIFT i a u se MODE MEMORY BAND SHIFT z z 5 S S o 8 y z S a 5 a 2 2 Z S S a z 2 a 5 2 2 S a S S V AUX CIl CIL OG A OG OG o x Ei E 2 E m 2 x gt E E E D Geier o o E e D S 2 S S z ZS M DOO GE DSP DSP STANDARD DREI Wem El un STANDARD BEI HDD simutation PUREDIRECT DIRECT STEREO WA PUREDIRECT DIRECT STEREO WM MODE SELECT LIGHT POWER Power on standby ON SOURCE 0 9 10 Channels TV VCR Switch between TV and video player TV VOL Volume up down CHANNEL Switch channels des
7. Component This assigns the color difference component In Assign video input jacks for the different input sources ee NONE Re NONE NONE NONE Mode output terminal AUTO Al A8 87 5 89 1 98 1 108 0 90 1 90 1 90 1 90 1 MHz B1 B8 522 603 999 1404 1611 kHz 90 1 90 1 90 1 MHz C1 C8 90 1 MHz Auto Tuner FM stations are received automatically and stored Presets in the memory D1 D8 90 1 MHz E1 E8 90 1 MHz F1 F8 90 1 MHz G1 G8 90 1 MHz Video Input Set the input signal to be output from the monitor 11 ENGLISH 4 Advanced Playback e Speaker system layout Basic system layout e The following is an example of the basic layout for a system consisting of eight speaker systems and a television monitor Set the audio delay to delay time the sound and Audio Delay synchronize it with the picture Subwoofer Center speaker system Dolby Digital Turn the audio compression on or off when down Setup mixing Dolby Digital signals Surround back speaker systems Auto Surround Set the Auto surround mode function Auto Surround Mode ON Mode 5 Option Setup Power AMP Set this to switch the surround back channel s Assignment power amplifier for use for zone2 SES This sets the output level the zone2 output jacks This menu is not displayed when ZONE2 is Variable selected at Option Setup Power Amp Assign Zone vol Level ZONE MAIN Fron
8. If no RDS stations is found with above operation all the reception band are searched When a broadcast station is found that station s name appears on the display To continue searching repeat step 3 If no other RDS station is found when all the frequencies are searched NO RDS is displayed RDS New tuning system for your convenience 1 Push RS ROS RDS station Program category Traffic info Radio Text 2 Tune by preset Up Down CHB5 FM105 50MH z This is the screen when operated RDS search Use this function to automatically tune to FM stations that provide RDS service OFF ON SOURCE O O OFF N ZONE 2 ZONE 1 MAIN OFF D CAVE CABLE VDP BAND SHIFT CO 5CH 7CH STEREO VCR CHANNEL t SURROUND PARAMETER FRONT SURROUND INPUT USE LEARN O DENON RC 975 PTY search Use this function to find RDS stations broadcasting a designated program type PTY For a description of each program type refer to Program Type PTY 1 4 Set the input function to TUNER TUNER Remote control unit RDS Press the RDS button until PTY SEARCH appears on RETU the display Remote control unit x The main unit s display switches as follows each time the RDS buttons are pressed Display RDS Search New tuning system for your convenience 1 Push RDS KS HD station P
9. O Main unit Oee00e0008 Display NOTES Recording sources other than digital inputs selected in the REC OUT mode are also outputted from the Zone2 preout jacks Digital signals are not outputted from the analog REC OUT jacks 37 ENGLISH MULTI ZONE Multi zone playback with multi source MULTI ZONE MUSIC ENTERTAINMENT SYSTEM e When the outputs of the ZONE2 OUT terminals are wired and connected to integrated amplifiers installed in other rooms different sources can be played in rooms other than the main zone in which this unit and the playback devices are installed Refer to ZONE2 on the diagram below e ZONE2 SPEAKER OUT can be used when ZONE2 is selected at System Setup Menu Power Amp Assign In this case Surround Back Speaker OUT cannot be used for MAIN ZONE See page 25 To control playback devices other than the ones above either use that device s remote control unit or preset a separately sold programmable remote control unit NOTES e For the AUDIO output use high quality pin plug cords and wire in such a way that there is no humming or noise e For instructions on installation and operation of separately sold devices refer to the devices operating instructions e When the PURE DIRECT mode is set for the main zone no signals are output to the ZONE2 video terminals e Signals are output from the ZONE2 vid
10. RDS indicator This lights when an RDS broadcast has been received TUNED indicator This lights when an FM AM broadcast has been received STEREO indicator This lights when an FM stereo broadcast has been received in ZONE2 REC Remote control unit e For details on the functions of these parts refer to the pages given in parentheses Remote control signal transmitter LED indicator Power buttons ZONE 1 MAIN buttons MEMORY BAND SHIFT I gaun ees EE TONER Wang 2 O Tuner system System V AUX i buttons sss 29 48 51 Input source selector 30 31 34 EEGEN TS E ER Surround buttons ST 35 36 40 42 44 45 STEREO STEREO U 1PURE DIRECT DIRECT U U MODE SELECT button See Master volume control System buttons buttons MUTING button SURROUND PARAMETER SYSTEM SETUP SETUP button 40 42 45 46 CH SELECT ENTER button 11 39 40 RDS RETURN button FRONT SPEAKER button SURROUND BACK button USE LEARN DENON INPUT MODE selector buttons RC 975 SETTING UP THE SYSTEM e Once all connections with other AV components have been completed as described in CONNECTIONS see pages 5 to 9 make the various settings described below on the monitor screen using the AVR 2805 s on screen display function These settings are required to set up the listening room s AV system centered around the AVR 2805 Use the following buttons to set
11. ee ele Ee a e o_o Di monitori Extension jacks for future use CONTROL terminal Perform the following operation before using an external controller connected to the RS 232C terminal 1 Press the ON STANDBY button on the main unit and set the unit to the operating mode 2 Perform the operation to turn off the power from the external control 3 Check that the product has been set to the standby mode After checking the above check the connections of the external controller Operation is possible ENGLISH 2 ZONE2 SPEAKER OUT and PREOUT CONNECTIONS e H another power amplifier or pre main integrated amplifier is connected the ZONE output terminals can be used to play a different program source in ZONE2 the same time o e ZONE2 SPEAKER OUT can be used when ZONE2 is selected at System Setup Menu Power Amp Assign In this case Surround Back Speaker OUT cannot be used for MAIN ZONE See page 25 Speaker system connections Connect the speaker terminals with the speakers Speaker Impedance making sure that like polarities are matched with e Speakers with an impedance of from 6 to 16 with Mismatching of polarities will result Q ohms can be connected for use as front cent
12. fa vm S fluid off the inside of the battery compartment and ag gt Forward play mo suRRouND ae insert new batteries WM Stop a e When replacing the batteries have the new Se AB Switch between sides A and B w batteries ready and insert them as quickly as CE OD lt A Rewind o DENON possible kk Fast forward Ii Pause Quins lt Reverse play mm O 4 Tuner system buttons e Point the remote control unit at the remote sensor 3 MD recorder MD on the main unit as shown on the diagram CD recorder CDR system buttons e The remote control unit can be used from a straight are distance of approximately 7 meters from the main unit but this distance will be shorter if there are sini obstacles in the way or if the remote control unit is not pointed directly at the remote sensor li e The remote control unit can be operated at a horizontal angle of up to 30 degrees with respect to D E the remote sensor on O NOTES A ee SE noes gt Play e t may be difficult to operate the remote control S Ee MODE Switch between AUTO and MANUAL hag i ir 7 SNE SG exposed to direct Lea el Ae Search Go beginning of track MEMORY Preset memory Approx 7 m g g SE lt lt kb Manual search forward and reverse BAND Switch between AM and FM bands e Do not press buttons on the main unit and remote u ue SHIFT Switch preset channel range control unit simultaneously Doing so may result in TUNING Tuning up down malfun
13. mope P Main unit Remote control unit 3 Select the Dolby DTS Surround Select Audio Delay at the Ne Of Advanced Playback Menu Remote control unit MODE ON SOURCE LEARNED TX ZONE 2 ior 1 MAN OFF ee geed Sen GoGo gt Gm GE Gs CD 6 Switch to the Audio Delay oN adjustment screen Main unit Main unit Remote control unit O O O Q Remote control unit 4 Play a program source DVD etc 2 2 5 OLO 5 S S S lt gt si a x H D G CIl lt Ss EJ lt S E D i 2 x gt 2 2 Ed D J Set the delay time 0 ms 200 ms 2 Press the SYSTEM SETUP button and display the System Setup Menu 4 1 Audio Delay Input Source 4 Oms gt DSP STANDARD EN MA siyuiation 1 2 OI LP Q SYSTEM SETUP Gi Auto Setup Room EQ Speaker Setup 1 2 SETUP 3 Input Setup 4 Advanced Playback t 5 Option Setup Remote control unit Remote control unit Exit With a movie source for example adjust so that the movement of the actors lips is 3 See eee ea ack synchronized with the sound Net at the System Setup Menu y 1 Remote control unit Enter the setting The Advanced Playback Menu reappears INPUT Ga Gi GC GC USE LEARN O DENON RC 975 Remote control unit 9 Press the SYSTEM SETUP button
14. 3 Nos At the Input Setup Menu select Digital In Assign 3 Input Setup 1 lt gt GI Digital In Assign Remote control unit 2 Ext In Subwoofer Level e 3 3 Component In Assign 4 Video Input Mode 5 Auto Tuner Presets 4 Exit Remote control unit Remote control unit Display the Digital Inputs screen 3 1 Digital CD EE ES OFF Dvo COAX2 TAPE OPT 4 OPT1 OFF OPT2 OPT5 OPT3 Default es 4 In Assign Remote control unit 3 Select the digital input jack to be assigned to 4 Enter the setting the input source The Input Setup Menu BOY reappears Remote control unit Select the input source Remote control unit NOTES e The OPTICAL 3 4 jacks on the AVR 2805 s rear panel are equipped with an optical digital output jack for recording digital signals on a CD recorder MD recorder or other digital recorder Use this for digital recording between a digital audio source stereo 2 channel and a digital audio recorder 2 Select the digital input jack Remote control unit e Do not connect the output of the component connected to the OPTICAL 3 4 OUT jack on the AVR 2805 s rear panel to any jack other than the OPTICAL 3 4 IN jack e PHONO and TUNER cannot be selected on the Digital In Assignment Select OFF for input sources for which no digital input jacks are used x If Yes is selected for Default the
15. 5 Muting Level 6 7 E 3 Remote control unit On Screen Display Setup Lock 1 lt gt Select On Screen Display at the Option Setup Menu 5 Option Setup xit Power Amp Assign GH Zone2 Vol Level p Trigger Out 1 Setup Display the Muting Level screen Trigger Out 2 Setup T Muting Level On Screen Display Setup Lock Remote control unit Remote control unit Display the On screen display setup screen 3 Not Select the desired setting e 20 dB It is turned down the volume to 20 dB from the present level e 40 dB It is turned down the volume to 40 dB trom the present level Tee gt 408 20B e dB Itis turned off the volume 5 5 Muting Level Remote control unit Remote control unit 3 Select ON or OFF 5 6 On Screen Display MEES Mode 3 Remote control unit Enter the setting The Option Setup Menu reappears 5 6 On Screen Display 4 Select the On Screen Display Select Model or Mode2 mode Remote control unit RO c MERES lt gt Mode2 R Remote control unit Remote control unit Enter the setting The Option Setup Menu reappears Remote control unit E ENGLISH 5 7 Protecting the setting The system setup settings can be locked so that they cannot be changed easily 1 Select Setup Lock at the Option Setup Menu 5 Option S
16. H 0 PETT TS x xX x Xx Ty Sl aw E D OQ A O Adjustable Automatic searching begins x Not adjustable then stops when a station is tuned in o Ed a OO G STANDARD INANE MUSIC Ko a ER S Remote control unit PURE DIRECT DIRECT STEREO STEREO MODE SELECT LIGHT If tuning does not stop at the desired station use to the Manual tuning operation SC CHANNEL Manual tuning 48 1 Set the input function to TUNER 4 TUNING TV VOL Press the TUNING or button to tune in the desired FUNCTION TUNER station The frequency changes OC continuously when the _ button is held in Main unit Remote control unit Remote control unit 2 BAND S Remote control unit 3 MODE 3 Remote control unit Watching the display press the BAND button to select the desired band AM or FM Press the MODE button to set the manual tuning mode Check that the display s AUTO indicator turns off NOTES e When in the auto tuning mode on the FM band the STEREO indicator lights on the display when a stereo broadcast is tuned in At open frequencies the noise is muted and the TUNED and STEREO indicators turn off When the manual tuning mode is set FM stereo broadcasts are received in monaural and the STEREO indicator turns off op ZONE 2 oer 1 RAA Use the Auto tuning o
17. MEN Menu DISPLAY Switch display RETURN Return A Tak Cursor up down left and right ENTER P Enter SURROUND PARAMETER SURROUND PARAMETER onscreen A DISPLAY FRONT SURROUND Gam USE LEARN O DENON RC 975 FRONT SURROUND INPUT USE LEARN O DENON RC 975 NOTES e For this CD CDR MD and TAPE components buttons can be operated in the same way as for Denon audio components e The television can be operated in the DVD VDP VCR and TV modes ENGLISH Learning function If your AV component is not a DENON product or if it cannot be operated using the preset memory it can be controlled with the included remote control unit by storing its remote control signals in the remote control unit For some remote control signals it is not possible to learn the signals or the device will not operate properly In such cases use the remote control unit included with the device to operate it 1 Press the USE LEARN button with the tip of a ES 6 pen etc to set the learn mode O e Both the mode selector buttons and zoez TINETA LEARNED TX indicator flash Flashes 9 i Gam G Gi GD 2 Press the mode button of the equipment for EN which learning is desired e Mode button and LEARNED TX_ indicator flash CABLE VDP d USE LEARN 1 3 7 pb DENON RC 975 3 Press the button that is to be learned The LEARNED TX indicator stops flashing and
18. Set the parameters Cp le So e Remote control unit Remote control unit When the surround parameters are set using the buttons on the main unit stop operating buttons after completing the settings The settings are automatically finalized and the normal display reappears after several seconds When the settings are made using the buttons on the remote control unit press the ENTER or SURROUND PARAMETER button to finish PHONO cD TUNER TUNING TV VOL DVD VDP VCR 1 VCR 2 CHANNEL TV 2 ec el SIMULATION V AUX STANDARD PURE DIRECT DIRECT STEREO CHAICH COO OO JODE SELECT LIGHT SYSTEM SURROUND P PARAMETER SE INPUT USE LEARN O DENON RC 975 NOTES e The surround speaker setting can also be changed with the SPEAKER button on the remote control unit When Default is selected and the CURSOR left button is pressed CINEMA EQ and D COMP are automatically turned off ROOM SIZE is set to medium EFFECT LEVEL to 10 DELAY TIME to 30ms and LFE to 0dB The ROOM SIZE expresses the expansion effect for the different surround modes in terms of the size of the sound field not the actual size of the listening room When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC II DOLBY PRO LOGIC IIx DTS NEO 6 modes and the input signal switches to a digital signal encoded in Dolby D
19. TONE This adjusts the tone control This can be set individually for the separate shroud mode other than Pure direct and direct mode AFDM Auto Flag Detect Mode ON This function only works with software on which a special identification signal is recorded This software is scheduled to go on sale in the future This is a function for automatically playing in the 6 1 channel mode using the surround back speakers if the software is recorded in DTS ES or in the normal 5 1 channel mode without using the surround back speakers when the software is not recorded in DTS ES OFF Set the OFF mode to perform 6 1 channel playback with conventional 5 1 channel sources or sources on which the Identification signal described below is not recorded In addition screen information is displayed in the following order when the ON SCREEN button is pressed repeatedly OSD 1 Input signal OSD 2 Input output OSD 3 Auto surround mode OSD 3 9 Tuner preset stations NOTE OSD 3 This is displayed when the auto surround mode is set to ON and the input mode is set to Auto It is not displayed when the input mode is set to Analog or EXT IN SB CH OUT 1 Multi channel source EE ee Playback is conducted without using the surround back speaker NON MTRX egene The same signals those of the surround channels are output from the surround back channels MTRX ON e Surround back channel is reproduced
20. This function can be used for example to turn on the amplifier s power select the input source turn on the monitor TV s power turn on the source component s power and set the source to the play mode all at the touch of a button O sz U DISPLAY RETURN SN FRONT SURROUND Gt Ga Gi U INPUT I GN Si Ga amp USE LEARN O DENON RC 975 1 System call buttons Up to 10 signals each can be stored at the CALL1 and CALL2 buttons 2 Storing system call signals 1 Press the power ON SOURCE button and the OFF button at the same time e The LEARNED TX indicator flashes OFF ON SOURCE OFF ON SOURCE LEARNED TX Q Q 176 Case N i G Cm CABLE P 2 Press the CALL 1 button e The mode selector buttons and LEARNED TX indicator flash J 3 Press the mode buttons of the equipment that is to be registered to System Call w gt 2 E 3 S S o 8 a z S a 5 2 2 dD amp S lt e E Di OLO x Ei 2 2 E m OOo EC STANDARD DOS DSF SCH ICH PURE DIRECT DIRECT STEREO STEREO OOO MODE SELECT LIGHT MI S E 5 oF Z z 2 Q Q CABLE VDP Ours SYSTEM SURROUND P PARAMETER 4 Press the buttons whose remote control signals you want to store one by one onscreen A 5 Repeat steps 3 and 4 to register the desired buttons DISPLAY RETURN FRONT SURROUND 2
21. channel also called the 1 channel containing bass frequencies of up to 120 Hz e Dolby Pro Logic II can be used to decode not only sources recorded in Dolby Surround X but also Unlike the analog Dolby Pro Logic format Dolby Digital s main channels can all contain full range sound regular stereo sources into five channels front left front right center surround left and surround right to information from the lowest bass up to the highest frequencies 22 kHz The signals within each channel achieve surround sound are distinct from the others allowing pinpoint sound imaging and Dolby Digital offers tremendous dynamic e Whereas with conventional Dolby Pro Logic the surround channel playback frequency band was limited range from the most powerful sound effects to the quietest softest sounds free from noise and distortion Dolby Pro Logic II offers a wider band range 20 Hz to 20 kHz or greater In addition the surround channels were monaural the surround left and right channels were the same with previous Dolby Pro SCH Logic but Dolby Pro Logic II they are played as stereo signals W Dolby Digital and Dolby Pro Logic e Various parameters can be set according to the type of source and the contents so it is possible to Comparison of home surround achieve optimum decoding see page 41 systems Dolby Digital Dolby Pro Logic X Sources recorded in Dolby Surround No recorded channels elements 5 1 ch ch These are sources in whic
22. the mode button lights Se e Mode button and LEARNED TX indicator 6 To learn other buttons repeat steps 2 to 5 flashed if a button that cannot be learned is pressed e To cancel press the USE LEARN button oo 7 Once the learning operation is completed press the USE LEARN button again 4 Point the remote control units directly at each The mode button and the LEARNED TX other and press and hold in the button on the indicator stop flashing and the learning mode is other remote control cancelled unit which you want to learn Other remote control unit Check that the stored codes work properly NOTES 5 The mode button and the LEARNED TX elf the codes could not be stored the indicator lights release the button on the other remote control unit t LEARNED TX indicator start flashing rapidly For e The mode button and limited number of models codes cannot be the LEARNED TX indicator Ss stored in RC 975 start flashing again SKS e f the mode button and LEARNED TX indicator start flashing rapidly this means that the memory is already full and the code you have just attempted to store was not stored To learn that code first perform the resetting operation See page 33 31 ENGLISH System call The accessorious remote control unit is equipped with system call function allowing a series of remote control signals to be transmitted by pressing a single button
23. then press the CURSOR left SURROUND SELECT STANDARD button 2 gt O E 4 6 Press the ENTER button to return to the previous screen Main unit Main unit Remote control unit 5 FRONT SURROUND 40 6 Set the various surround parameters 7 When the surround parameters are set using the buttons on the main unit stop operating buttons after completing the settings The To settings are automatically finalized and the O normal display reappears after several seconds When the settings are made using the buttons on the remote control unit press the ENTER Main unit Remote control unit or SURROUND PARAMETER button to finish If the setting ends press the ENTER or SURROUND PARAMETER button NOTE e There are four Dolby Surround Pro Logic modes NORMAL PHANTOM WIDE and 3 STEREO The AVR 2805 sets the mode automatically according to the types of speakers set during the system setup process page 18 Surround parameters C Pro Logic IIx and Pro Logic Il Mode Select one of the modes Cinema e Cinema This mode is for use with stereo television shows and all programs encoded in Dolby Surround Ir a Music Pro Logic or Game Music This mode is recommended as the standard mode for auto sound music systems no video and is optional tor A V systems Panorama Control This mode extends the front stereo image to include the surround speakers for an exciting wr
24. Crossover Frequency mode is sent to the subwoofer None 9elect this when no speakers are installed Yes NO sc Seale Select Yes when a subwoofer is installed No when a subwoofer is not installed 2spkrs 1spkr Set the number of speakers to be used for the surround back channel x If the subwoofer has sufficient low frequency playback capacity good sound can be achieved even when Small is set for the front center and surround speakers ENGLISH 2 2 Setting the Delay Time 4 Once Meters or Feet is selected in step 3 2 2 Delay Time 2 2 Delay Time a Step 4 e Input the distance between the listening position and each speakers to set the delay time for the surround EE E playback Subwoofer Preparations epics 7 Measure the distances between the listening position and the speakers L1 to L5 on the diagram at the right Sy J g L1 Distance between center speaker and listening position baste SS 5 gt select the speaker to be set L2 Distance between front speakers and listening position IN W isenta The picture of the speaker selected blinks L3 Distance between surround speakers and listening position L5 Distance between subwoofer and listening position sp 4 w SBR L4 Distance between surround back speakers and listening position SL at e A SR EE Remote contro
25. LEARN O DENON RC 975 ENGLISH Recalling preset stations e Recalling preset stations from the remote control unit 1 2 SHIFT Remote control unit CHANNEL Remote control unit Watching the display press the SHIFT button to select the preset memory block Watching the display press the CHANNEL UP or DOWN button to select the desired preset channel e Recalling preset stations from the main unit s panel 1 2 TUNI PRES Main unit FUNCTION O Main unit Press the TUNING PRESET button Turn the FUNCTION knob and select the desired preset channel CABLE VDP BE Ei Ei m O O O SHIFT E Ss 2 Ei e E TUNER TUNING TV VOL VDP OO VCR 1 BEEN lt o 3 lt tse KE S S H 7 SZ H z S aon STANDARD INEM SCHT PURE DIRECT DIRECT STEREO Sid OC zZ 5 2 E Si S 2 U OE CS Q Q Q N o 20000000 0000900 49 ENGLISH RDS Radio Data System RDS works only on the FM band is a broadcasting service which allows station to send additional information along with the regular radio program signal The following three types of RDS information can be received on this unit E Program Type PTY PTY identifies the type of RDS program The program types and their displays are as follows
26. Precautions when connecting speakers If a speaker is placed near a TV or video monitor the colors on the screen may be disturbed by the speaker s magnetism If IS G PHONO C O 5 3 2 P amp BS J fol i amp ZB vg S OOO O G TT Des this should happen move Gi the speaker away to a we Menn SC yea on AAE ERG position where it does not have this effect E Power ON STANDBY swrch 34 SURROUND PARAMETER buten 40 42 SURR BACK CH Ges POWER desto Ga SELECT kuch 35 36 40 44 46 47 EE Power switch on 34 52 QB TONE DEFEAT buten 36 W B e gy Headphone jack PHONES 1111111 36 TONE CONTROL button o n 36 47 EE INPUT MODE button osi 34 MASTER VOLUME com 35 EE ANALOG button ene a MASTER VOLUME indicator een eer er ara Q EXT INbunton e DA 35 KE E en O PURE DIRECT buten 36 Display FRONT SPEAKER button iii 34 Remote control sensor di SURROUND BACK button veocccsceeeee a REMOTE SENSOR ee 29 QD DIMMER buten 37 FUNCTION eh GE QD STATUS buten 37 VIDEO SELECT button een ou V AUX input jacks ann e QD ZONE2 REC SELECT button cree io QD SETUP MIC e
27. Press the POWER switch button am ON E OFF D Main unit ON The power turns on and indicator is light Set the power switch to this position to turn the power on and off from the included remote control unit e E OFF The power turns off and indicator is off In this position the power cannot be turned on and off from the remote control unit 4 Turn on the power Press the POWER ON STANDBY switch button ON STANDBY ON SOURCE Main unit Remote control unit When pressed the power turns on and the display lights The sound is muted for several seconds after which the unit operates normally When pressed again the power turns off the standby mode is set and the display turns off 34 Q O Ehel ZONE 2 ware 1 MAINI FC Tee O O z S S 5 Se 2 2 S S Q lt e E Di x Ei 2 2 E m OOO 0O o e D STANDARD ENA PURE DIRECT DIRECT STEREO OOO MODE SELECT LIGHT ES el e 5 a a8 ae E GE E Sg 2 Q onscreen AR DISPLAY CD Ga oD O DENON RC 975 5 The front speakers switch as shown below each time the FRONT SPEAKER button is pressed FRONT SPEAKER FRONT Main unit Remote control unit FRONT A FRONT B FRONT A B Playing the input source 2 5 Si o o T SH S Pa z 4
28. SL SR and LFE DTS ES Extended Surround also offers the SB Surround Back sometimes also referred to as Surround center channel for surround playback with a total of 6 1 channels DTS ES Extended Surround includes two signal formats with different surround signal recording methods as described below M DTS ES Discrete 6 1 DTS ES Discrete 6 1 is the newest recording format With it all 6 1 channels including the SB channel are recorded independently using a digital discrete system The main feature of this format is that because the SL SR and SB channels are fully independent the sound can be designed with total freedom and it is possible to achieve a sense that the acoustic images are moving about freely among the background sounds surrounding the listener from 360 degrees Though maximum performance is achieved when sound tracks recorded with this system are played using a DTS ES decoder when played with a conventional DTS decoder the SB channel signals are automatically down mixed to the SL and SR channels so none of the signal components are lost WM DTS ES Matrix 6 1 With this format the additional SB channel signals undergo matrix encoding and are input to the SL and SR channels beforehand Upon playback they are decoded to the SL SR and SB channels The performance of the encoder used at the time of recording can be fully matched using a high precision digital matrix decoder developed by DTS thereby achieving surround
29. SMALL in the setup menu The low frequency signal range of channels set to LARGE are produced from those channels Crossover Frequency 2 4 e When Subwoofer is set to Yes at the Speaker Configuration Setting set the frequency Hz below which the bass sound of the various speakers is to be output from the subwoofer the crossover frequency e For speakers set to Small sound with a frequency below the crossover frequency is cut and the cut bass sound is output from the subwoofer instead e When the subwoofer set to NO the bass sound is output from the speaker set as Large NOTE For ordinary speaker systems we recommend setting the crossover frequency to 80 Hz When using small speakers however setting the crossover frequency to a high frequency may improve frequency response for frequencies near the crossover frequency Subwoofer mode 2 5 e The subwoofer mode setting is only valid when LARGE is set for the front speakers and YES for the subwoofer in the Setting the type of speakers see page 18 e When the LFE MAIN playback mode is selected the low frequency signal range of channels set to LARGE are produced simultaneously from those channels and the subwoofer channel In this playback mode the low frequency range expand more uniformly through the room but depending on the size and shape of the room interference may result in a decrease
30. Si Remote control unit Adjust the level of the selected speaker X When the surround back speaker setting is set to 1Ispkr for Speaker Configuration this is set to SB SYSTEM SURROUND P PARAMETER FRONT SURROUND INPUT USE LEARN O DENON RC 975 NOTES e The adjustment range for the different channels is 12 dB to 12 dB e The sound from the subwoofer can be cut by lowering the SW subwoofer setting one step from 12 dB setting it to OFF 39 ENGLISH Fader function 2 Play a program source with the Dglpowv surrouno mark e This function makes it possible to lower the volume of the front channels FL C and FR or the rear channels e For operating instructions refer to the manuals of the respective components SL SR SBL and SBR together Use it for example to adjust the balance of the sound from each position when multi channel music sources are played 3 Set the surround parameter mode 1 Select FADER SURROUND SURROUND P D OFF j j i Se EQ TONE 4 The channel switches in the ME i D SB CH OUT order shown below each Main unit Remote control unit Ske K Remote control unit time this button is pressed Default Xx The on screen display differs according to whether the operation is performed from the main unit
31. The protector circuit may be activated if the set is played for long periods of time at high volumes when speakers with an impedance lower than the specified impedance for example speakers with an impedance of lower than 4 Q ohms are connected If the protector circuit is activated the speaker output is cut off Turn off the set s power wait for the set to cool down improve the ventilation around the set then turn the power back on p setup me AV SURROUND RECEIVER AVR 2805 e E DEE EE EE EE 1 E a I i Video camera d z E I i Connecting a video camera component KX e V OUTPUT e H E i VIDEOOUT S VIDEO OUT e Connect the video camera component s l i SC i output jacks to this unit s V AUX INPUT e P J l jacks es E l a E l 1 se H EE D TEE TEE E NNN an LNE OUT T I X The V AUX terminal is covered with a cap E ew R V Remove this cap in order to use the e VIDEO OUT e terminal See page 3 for instructions on H T d removing the cap ENGLISH Connections 6 PART NAMES AND FUNCTIONS e When making connections also refer to the operating instructions of the other components Connection jack for SURROUND SPEAKER cnwoofer with builtin CENTER SPEAKER FRONT SPEAKER Front Panel SYSTEMS e uber Woolen SYSTEM SYSTEMS A ES e For details on the functions of these parts refer to the pages given in parentheses e
32. VIDEO 2 VIDEO 3 41 NONE NONE AUX NONE Default Yes 4 Remote control unit Select the component Y PB CB and Pr Cr video input terminal to be assigned to the input source CO Select the source selection 2 Select the component video input terminal Select NONE for sources for which the C component Y PB CB and PrR CR video UH input is not to be used x When the default Yes is selected S Remote control unit the settings are reset to the factory defaults Remote control unit Enter the setting The Input Setup Menu reappears Remote control unit 3 4 Setting the Video Input Mode Select Video Input Mode at the Input Setup Menu 3 Input Setup 1 Digital In Assign E 2 Ext In Subwoofer Level 3 Component In Assign GA Video Input Mode J4 5 Auto Tuner Presets Exit Remote control unit Display the Video Input Mode screen 3 4 Video Input Mode Gi ovo mA gt vor AUTO Tv AUTO DBs AUTO vcR1 AUTO VCR AUTO vaux AUTO Default el Remote control unit 3 Remote control unit Remote control unit AUTO When there are multiple input signals the input signals are detected and the input signal to be output from the video monitor output terminal is selected automatically in the following order component video S Video composite video Component The signal connected to the component video terminal is alway
33. input sources are stored in the memory AUTO auto mode In this mode the types of signals being input to the digital and analog input jacks for the selected input source are detected and the program in the AVR 2805 s surround decoder is selected automatically upon playback This mode can be selected for all input sources other than PHONO and TUNER The presence or absence of digital signals is detected the signals input to the digital input jacks are identified and decoding and playback are performed automatically in DTS Dolby Digital or PCM 2 channel stereo format If no digital signal is being input the analog input jacks are selected Use this mode to play Dolby Digital signals 2 PCM exclusive PCM signal playback mode Decoding and playback are only performed when PCM signals are being input Note that noise may be generated when using this mode to play signals other than PCM signals 3 DTS exclusive DTS signal playback mode Decoding and playback are only performed when DTS signals are being input ANALOG exclusive analog audio signal playback mode The signals input to the analog input jacks are played 5 EXT IN external decoder input jack selection mode The signals being input to the external decoder input jacks are played without passing through the surround circuitry NOTE e Note that noise will be output when CDs or LDs recorded in DTS format are played in the PCM exclusive PCM signal
34. mode button and the LEARNED TX indicator will light The preset codes are as follows upon shipment from the factory and after resetting KEE HITACHI 5 To store the codes of another component in the CD TAPE ge e EE DENON memory repeat steps 1 to 4 CDR MD gees EE SES DENON CDR PVON BEER DENON DVD DBS GCABL EEN ABC CABLE DVD preset codes NOTES e Depending on the model and year of manufacture this function cannot be used for some models even if they are of makes listed on the included list of preset codes e Some manufacturers use more than one type of remote control code Refer to the included list of DVD 2800 preset codes to change the number and check it DVD 2800II out DVD 2900 e The preset memory can be set for one DVD 3800 component only among the following DVD A11 CDR MD DVD VDP and DBS CABLE DVD A1 DVD 700 DVD 900 DVD 1000 DVD 1400 DVD 1500 DVD 2200 DVD 800 DVD 1600 DVD 2000 DVD 2500 DVD 3000 DVD 3300 DENON Model No Operating a component stored in the preset memory 1 Press the mode selector component you want to operate NOTE CABLE VDP N e For the DVD player remote control buttons function names may differ manufacturer Compare with the remote control operation of the various components according to 2 Operate the component e For details refer to the component s operating instructions button for the X Some models cannot be operated with this remot
35. out terminals e The REC OUT terminals have no conversion function so when recording only connect the video terminals TV or DBS tuner Connecting a TV or DBS tuner TV or DBS e Connect the TV s or DBS tuner s video output jack VIDEO OUTPUT to the yellow TV or DBS IN jack using a 75 Q ohms video coaxial pin plug cord e Connect the TV s or DBS tuner s audio output jacks AUDIO OUTPUT to the TV or DBS IN jacks using pin plug cords gt e H CO 5 m CO D EI DE A Cc DIO VIDEO DVD player or video disc player VDP etc H BE SSS BEBE CT Bs oO Connecting a DVD player or a video disc player VDP DVD e Connect the video disc player s video output jack VIDEO OUTPUT to the yellow DVD IN jack using a 75 Q ohms video coaxial pin plug cord e Connect the video disc player s analog audio output jacks ANALOG AUDIO OUTPUT to the DVD IN jacks using pin plug cords e VDP can be connected to the VDP jacks in the same way Cell ma Pee LLL LLL J E Sie aH EU 8 z o eh e e alle e EI z 8 CO KORO urio OPT 4 Monitor TV e fo e alle o g a 2 e S Q Sbrnnnnnpnnnn en MONITOR OUT e Connect the TV s video input jack VIDEO INPUT to the MONITOR OUT jack using a 75 Q ohms video coaxial pin pl
36. playback or ANALOG exclusive PCM signal playback mode Select the AUTO or DTS mode when playing signals recorded in DTS from a laser disc player or CD player 3 Select the play mode Example Stereo SURROUND SELECT W O S Main unit Main unit Remote control unit To select the surround SURROUND mode while adjusting the Surround parameters channel volume or tone control press the Main unit surround mode button then operate the selector 4 Start playback on the selected component e For operating instructions refer to the component s manual 5 Adjust the volume Imm L LILI op MASTER VOLUME OX Main unit The volume level is displayed on the master volume level display Remote control unit x The volume can be adjusted within the range of 80 to 0 to 18 dB in steps of 0 5 dB However when the channel level is set as described on page 20 or pages 39 if the volume for any channel is set at 0 5 dB or greater the volume cannot be adjusted up to 18 dB In this case the maximum volume adjustment range is 18 dB Maximum value of channel level Input mode display e In the AUTO mode Depending on the input signal e In the DIGITAL PCM mode e In the DIGITAL DTS mode DTS e In the ANALOG mode e In the EXT IN mode EXT IN Input signal display e DOLBY DIGITAL DO DIGITAL DIG es DTS DIG e PCM PCM DIG x The indicator lights when digital signal
37. rem l inte tr nger in i apparaten Do not let insecticides benzene and thinner come in contact with the set Lassen Sie das Ger t nicht mit Insektiziden Benzin oder Verd nnungsmitteln in Ber hrung kommen Ne pas mettre en contact des insecticides du benz ne et un diluant avec l appareil Assicuratevvi che l unit non venga in contatto con insetticidi benzolo o solventi No permita el contacto de insecticidas gasolina y diluyentes con el equipo Laat geen insektenverdelgende middelen benzine of verfverdunner met dit apparaat in kontakt komen Se till att inte insektsmedel p spraybruk bensen och thinner kommer i kontakt med apparatens h lje Never disassemble or modify the set in any way Versuchen Sie niemals das Ger t auseinander zu nehmen oder auf jegliche Art zu ver ndern Ne jamais d monter ou modifier l appareil d une mani re ou d une autre Non smontate mai n modificate l unit in nessun modo Nunca desarme o modifique el equipo de ninguna manera Nooit dit apparaat demonteren of op andere wijze modifi ren Ta inte is r apparaten och f rs k inte bygga om den CAUTION e Please be care the environmental aspects of battery e The ventilation should not be impeded by covering the disposal ventilation openings with items such as newspapers e The apparatus shall not be exposed to dripping or table cloths curtains etc splashing for use e No naked flame sources such as lighted
38. the Mic input jack or V AUX L jack 1 5 Mic Input Select un lt gt 1 6 Check the EO parameter e The frequency characteristic of each speaker is rectified and the tone of the speaker is unified The EQ parameters that were set in Auto Setup can be checked This item is automatically displayed after the measurement result of the Auto Setup Room EQ is decided 1 lt gt Select EQ Parameter Check at the Auto Setup Room 1 Auto Setup Room EQ UC EQ Menu Remote control unit Remote control unit 3 Select the Equalizer curve f Remote control unit 4 Dislay the parameter screen 1 Normal Freq 5 7Hz 1 10Hz 2 50Hz 510 1 1kHz 2 6khz 4 8 khz 10 kHz Remote control unit e Remote control unit Remote control unit e Auto Setup Manual EQ Setup Room EQ Setup Direct Mode Setup Mic Input Select EQ Parameter Check Exit Display the EQ Parameter Check screen 1 6 EQ Parameter Check amp 1 Normal 2 Front 3 Flat 5 Select the speaker channel Si Remote control unit 6 Enter the setting EQ4 Front L gt Q Gain 0 1 1 0dB 0 5 0 OdB 0 1 0 5dB 1 3 OdB 2 OdB 0 5 0 1 0 1 OdB OdB _ 008 Remote control unit If the check ends select Exit Parameter Check and press the ENTER button Neral The Auto Setup Room EQ oe Menu reappears Select E
39. the REC OUT mode This operation is possible when ZONE2 mode is selected Remote control unit Select ZONE2 using the ZONE2 button ON SOURCE The main zone output can be turned on and off LEARNED TX Im mmm ml DED QP ZONE TIMI FI DN 2 a me Press the ZONE2 ON am ee elas with the MAIN C7 Cay Putton 1 a ON OFF button OS a To turn off the ZONE2 Remote control unit mode O O O O Press the ZONE2 OFF as Ree a button D 2 VDP V AUX a E CHANNEL 3 Press the input source button e The ZONE source switches directly 4 The output level of the ZONE2 OUT terminals can be controlled using the VOLUME and buttons on the remote control unit The output level of ZONE2 OUT can be controlled only if ZONE2 vol level is set Variable at Zone2 Control in System Setup Menu see page 26 Or Remote control unit ON SCREEN x DEFAULT SETTING ZONE2 VOLUME LEVEL dB MINIMUM DISPLAY FRONT SURROUND ROI INPUT USE LEARN When the ZONE2 SOURCE function is set to TUNER the 5 CHANNEL preset channel can be O DENON selected using the CHANNEL am and buttons on the Remote control unit remote control unit ENGLISH 11 SURROUND Before playing with the surround function e Before playing with the surround function be sure to use the test tones to adjust the playback level from the differen
40. the surround speakers e Consult the owner s manual for your subwoofer for advice on placing the subwoofer within the listening room 60 to 90 cm Front speakers e Set the front speakers with their front e f the surround speakers are direct radiating As seen from the side Center speaker surfaces as flush with the TV or monitor linn nt Zeie ET monopolar then place them slightly behind oint slightly 7 SE ihe screen as possible Set the center speaker EERE AN downwards and at an angle to the listening position and parallel to the walls at a position Monitor between the front left and right speakers Sr and no further from the listening position than the front speakers Elan Consult the owner s manual for your subwoofer for advice on placing the subwoofer within the listening room H the surround speakers are direct radiating monopolar then place them slightly behind and at an angle to the listening position and parallel to the walls at a position 60 to 90 centimeters 2 to 3 feet above ear level at the prime listening position When using two surround back speakers place them at the back facing the Assecom from above front at a narrower distance than the front left and right speakers When using one surround back speaker place it at the rear center facing the front at a slightly higher position 0 to 20 cm than the surround speakers We recommend installing the surround back speaker s at a slightly downward facing ang
41. to complete the setting NOTE The audio delay setting does not apply when playing in the EXT IN mode or in the analog input direct mode or stereo mode TONE DEFEAT ON 44 12 DSP SURROUND SIMULATION e The AVR 2805 is equipped with a high performance DSP Digital Signal Processor which uses digital signal processing to synthetically recreate the sound field One of ten preset surround modes can be selected according to the program source and the parameters can be adjusted according to the conditions in the listening room to achieve a more realistic powerful sound These surround modes can also be used for program sources not recorded in Dolby Surround Pro Logic Dolby Digital or DTS Surround modes and their features Select this to achieve an atmosphere like that of a movie theater with a large screen In this mode WIDE SCREEN all signal sources are played in the 7 1 channel mode including Dolby Pro Logic and Dolby Digital 5 1 channel sources Effects simulating the multi surround speakers of movie theaters are added to the surround channels Select this when watching baseball or soccer programs to achieve a sound as if you were actually SUPER STADIUM i i at the stadium This mode provides the longest reverberation signals ROCK ARENA Use this mode to achieve the feeling of a live concert in an arena with reflected sounds coming from all directions This mode creates the sound field of a live house with a low ce
42. will appear In this case please relocate the blinking speaker s 7 PPPE vr Feet so that its distance is no larger than the value shown in highlighted line Example When Meters is selected Enter the setting The Speaker Setup Menu reappears The AVR 2805 automatically sets the optimum surround delay time for the listening room Remote control unit NOTE e f the distance unit is changed after the delay time is set the settings are reset to the factory default values see page 11 19 ENGLISH 2 3 Setting the Channel Level 6 lt gt e Use this setting to adjust so that the playback level between the different channels is equal UC L e From the listening position listen to the test tones produced from the speakers to adjust the level lt gt e The level can also be adjusted directly from the remote control unit For details see page 39 Remote control unit 1 Select Channel Level at the Speaker Setup Menu 2 Speaker Setup Speaker Config Delay Time Channel Level Crossover Frequency ES Subwoofer Mode Setup Exit Remote control unit Display the Channel Level screen 2 3 Channel Level Test Tone DS A gt Manual Test Tone Start H Level Clear Yes 4 Remote control unit a When the Auto mode is selected Test tones are automatically emitted from each s
43. with a value that Remote control unit 1 kHz 0 oo 2kH O 048 differs from the physical distance because of the internal electrical delay FREI 0 048 8 kHz 0 0dB Speaker Contig Check Delay Time Check Channel Level Check Config Check Delay Time Check Channel Level Check 3 Select the speaker to be set e SE The display changes as follows San 0s O48 ei Se 1252 op arge Smal 250Hz 0 od Center Sp S FL sic FL I 500k 0 048 Large EZ FR z FR r at FL FR gt C SL 1 kHz o OdB Subwoofer Center Center A No Subwoofer Subwoofer Remote control unit En SSC SR ae 4 T 1 X ine Succ SB W Flashing 8 kHz 0 0dB Config Check i Channel Level Check When the surround back speaker setting is set to Surround 1spkr at Speaker Configuration this is set to SL SL 0408 n Smal ER SR y ER SR 0dB SB SBL f i SBL OdB SBR SBR 008 lt gt Select the frequency 1 2 Manual EQ Setup 4 Front L gt 3 F 63H lt 4 0 Di t ES ER 12 Eu O 008 Deel 250k O 008 2 5 00Hz 0 OdB 1 kHz 0 0dB STC COMO a eeler D 2kH2 0 OdB as Ak 0 04B EE Remote control unit i i 8 kHz O 048 4 lt gt Select from the following three items based on the measurement results e ON
44. 24 5 1 ch DTS 6 1 ch DOLBY DIGITAL D D 2 ch D D 5 1 ch EG E EE E E NEE EECH EC TEE EE EE EE DTS SURROUND DTS NEO 6 DTS NEO 6 DTS ES MTRX DTS ES MTRX ES DSCRT6 1 DTS NEO 6 DTS SURROUND ES MTRX6 1 DTS SURROUND DTS PLIIx DOLBY PRO DOLBY LOGIC I DIGITAL EX DTS PLIIx Cinema Music DOLBY PRO DOLBY DIGITAL LOGIC Ix DOLBY DIGITAL PL IIx Cinema Music DTS 96 24 DTS PLIIx Cinema Music Cinema Music DOLBY DIGITAL DOLBY PRO DOLBY PRO LOGIC II LOGIC II DOLBY PRO DOLBY PRO LOGIC IIx LOGIC IIx Cinema Music Game Selectable The surround mode name differs depending on the SB CH OUT surround parameter setting The surround mode name differs depending on the input signal Not selectable Cinema Music Game Cinema Music Game DSP SIMULATION E sor xX E CO 60 Relationship between the video input signal and monitor output according to the VIDEO INPUT MODE settings VIDEO INPUT Input signals Mode ow Ge Ze MONITOR OUT COMPONENT S VIDEO VIDEO l AUTO Input signals COMPONENT Ge VIDEO INPUT Mode COMPONENT VIDEO INPUT Mode S VIDEO OI x x x x OC O O xI OI X O x O O Input signals COMPONENT VIDEO OI x x i l xIOIxXIOIxIO O S VIDEO S VIDEO S VIDEO COMPONENT 1 VIDEO VIDEO COMPONENT 2 S VIDEO S VIDEO COMPONENT 2 S VIDEO VIDEO 3 MONITOR OUT S VIDEO x C
45. 3 3 Select the input source to be played Example CD FUNCTION cD Main unit Remote control unit To select the input source when ZONE2 REC OUT TUNING PRESET or VIDEO SELECT is selected press the SOURCE button then operate the input function selector Se Main unit Select the input mode e Selecting the analog mode Press the ANALOG button to switch to the analog input ANALOG Main unit Remote control unit e Selecting the external input EXT IN mode Press the EXT IN on the EXT IN button on the remote control unit to switch the external input EXT IN ES Main unit Remote control unit e Selecting the AUTO PCM and DTS modes The mode switches as shown below each time the INPUT MODE button is pressed MODE mope O orn Main unit Remote control unit AUTO gt PCM gt DTS w gt 2 E SHIFT 3 g d a k TUNING TV VOL Ox x E o Ed a o z a S Ze E QG A Ki mech lt S 33 lt Ss 33 Di Ee OO STANDARD NAY MA wd Canon PUREDIRECT DIRECT STEREO WA JODE SELECT LIGHT Of 0 Q 0 S t SCREEN D se DISPLAY FRONT SURROUND Inpul A eo fen Ge F 2 fa KH W O DENON RC 975 Input mode selection function Different input modes can be selected for the different input sources The selected input modes for the separate
46. 36 EEC e 93 68 EEC QUESTO PRODOTTO EI CONFORME AL D M 28 08 95 N 548 e DECLARACI N DE CONFORMIDAD Declaramos bajo nuestra exclusiva responsabilidad que este producto al que hace referencia esta declaraci n est conforme con los siguientes est ndares EN60065 EN55013 EN55020 EN61000 3 2 y EN61000 3 3 Siguiendo las provisiones de las Directivas 73 23 EEC 89 336 EEC y 93 68 EEC EENVORMIGHEIDSVERKLARING Wij verklaren uitsluitend op onze verantwoordelijkheid dat dit produkt waarop deze verklaring betrekking heeft in overeenstemming is met de volgende normen EN60065 EN55013 EN55020 EN61000 3 2 en EN61000 3 3 Volgens de bepalingen van de Richtlijnen 73 23 EEC 89 336 EEC en 93 68 EEC OVERENSSTAMMELSESINTYG H rmed intygas helt p eget ansvar att denna produkt vilken detta intyg avser uppfyller f ljande standarder EN60065 EN55013 EN55020 EN61000 3 2 och EN61000 3 3 Enligt stadgarna i direktiv 73 23 EEC 89 336 EEC och 93 68 EEC Avoid high temperatures Allow for sufficient heat dispersion when installed on a rack Vermeiden Sie hohe Temperaturen Beachten Sie da eine ausreichend Luftzirkulation gew hrleistet wird wenn das Ger t auf ein Regal gestellt wird Eviter des temp ratures lev es Tenir compte d une dispersion de chaleur suffisante lors de l installation sur une tag re Evitate di esporre l unit a temperature alte Assicuratevi che ci sia un adeguata dispersione del calor
47. 4 ew UC f Remote control unit 2 3 Channel Level x To cancel the settings press the CURSOR down to select Level Clear and Yes on the Channel Level Remote control unit Test Tone Start H Level Clear Yes 4 5 Select Yes ES Remote control unit 20 Test Tone EAK gt Mana screen then make the settings again x When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode the channel level adjustments made will affect all surround modes Consider this mode a Master Channel Level adjustment mode x After you have completed the SYSTEM SETUP CHANNEL LEVEL adjustments you can then activate the individual surround modes and adjust channel levels that will be remembered for each of those modes Then whenever you activate a particular Surround sound mode your preferred channel level adjustments for just that mode will be recalled Check the instructions for adjusting channel levels within each surround mode See page 39 Xx You can adjust the channel levels for each of the following surround modes PURE DIRECT DIRECT STEREO DOLBY DTS SURROUND 5 7 CH STEREO WIDE SCREEN SUPER STADIUM ROCK ARENA JAZZ CLUB CLASSIC CONCERT MONO MOVIE VIDEO GAME MATRIX and VIRTUAL 1 2 4 Setting the crossover frequency Set the crossover frequency mode according to the speaker system being used 3 Remote control unit Se
48. 6 L 6 Press the CALL1 or CALL2 button and register 6 D USE LEARN System Call O DENON RC 975 err NOTES e The remote control signals for the buttons SS pressed while storing the system call signals are 3 Using the system call function transmitted when the buttons are pressed so eeh cover the remote sensor or take other measures Press the button at which the system call so that the components do not operate while 1 signals have been stored the signals are being stored E e The stored signals are transmitted e The mode button and LEARNED TX indicator flashing rapidly if you have already stored the maximum number of signals successively 32 Punch Through 1 Punch through button Buttons used in the CD CDR MD TAPE DVD VDP and VCR modes can be assigned to the buttons shown on the diagram at the right which are not normally used in the TV and DBS CABLE modes For example when the CD mode is set to the punch through mode in the TV mode the CD mode s PLAY STOP MANUAL SEARCH AUTO SEARCH PAUSE and DISC SKIP buttons signals are sent in the TV mode 2 Making the punch through setting 1 Press the power ON SOURCE button and the OFF button at the same time e The LEARNED TX indicator flashes OFF ON SOURCE Q 2 Press the B play button e TV and DBS CABLE mode buttons and LEARNED TX indicator flash Sx 3 Press the mode button of the equipment for which Punch Through
49. CH ICH STEREO Q Q SURROUND PARAMETER FRONT SURROUND O amp amp USE LEARN DENON RC 975 2 Resetting the punch through setting 1 Press the power ON SOURCE button and the OFF button at the same time e The LEARNED TX indicator flashes OFF ON SOURCE A 2 Press the B play button e TV and DBS CABLE mode buttons and LEARNED TX indicator flash Sx 3 Press the mode button of the equipment TV or DBS CABLE that is to be reset e The CD CDR MD TAPE DVD VDP and VCR mode buttons and LEARNED TX indicator will flash CABLE 4 Press the mode button of the equipment that is to be reset again e During the resetting operation the selected mode button and the LEARNED TX indicator will light they will return to steady state upon completion CABLE mae OFF ON SOURCE LEARNED TX 1 O ZONE 2 ZONE 1 MAIN OFF H FF ON D TAYE EDC Gm GD DU N CABLE VDP 1 Co GD G o S S VER CHANNEL DISC SKIP SURROUND PARAMETER FRONT SURROUND DISPLAY O e amp INPUT Ga o Ge USE LEARN O DENON RC 975 ENGLISH 33 ENGLISH 9 OPERATION Before operating 1 Refer to CONNECTIONS pages 5 to 9 and check that all connections are correct 2 Select AMP using the AMP button only when operating with the remote control unit d PY Remote control unit 3
50. DENON AV SURROUND RECEIVER AVR 2805 OPERATING INSTRUCTIONS INSTRUCCIONES DE OPERACION BEDIENUNGSANLEITUNG GEBRUIKSAANWIJZING MODE D EMPLOI BRUKSANVISNING ISTRUZIONI PER LUSO AL24 Processing MASTER VOLUME FUNCTION VIDEO ELECT SOURCE TUNING ZONE 2 PRESET RECSELECT i ON STANDBY S ON OFF FOR ENGLISH READERS PAGE 2 PAGE 61 FUR DEUTSCHE LESER SEITE 62 SEITE 120 POUR LES LECTEURS FRANCAIS PAGE 121 PAGE 179 PER IL LETTORE ITALIANO PAGINA 180 PAGINA 238 PARA LECTORES DE ESPANOL PAGINA 239 PAGINA 297 VOOR NEDERLANDSTALIGE LEZERS PAGINA 298 PAGINA 356 FOR SVENSKA LASARE SIDA 357 SIDA 415 ITALIANO ESPANOL NEDERLANDS SVENSKA ENGLISH DEUTSCH FRANCAIS NOTE ON USE HINWEISE ZUM GEBRAUCH OBSERVATIONS RELATIVES A L UTILISATION NOTE SULL USO CAUTION NOTAS SOBRE EL USO ALVORENS TE GEBRUIKEN OBSERVERA RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended t
51. E E E EE 5 Use the cursor left and right buttons to adjust the Gain e Retry Perform the measurement again TEEN level KS e Cancel Cancel the checked measurement value e Each frequency can be adjusted the range from 6 dB Speaker Conte Cheek to 6 dB in 0 5 dB step Remote control unit Delay Time Check Channel Level Check Remote control unit Stored Retry 4 Cancel4 6 When the Store is selected all parameters are stored 1 1 Auto Setup up l l l i Remote control unit When the Retry is selected it measures again WEE Remote control unit Enter the setting The Auto Setup Room EQ Menu reappears 15 ENGLISH Select the setting of an Equalizer that has been set with Auto Setup or Manual EQ 1 lt gt Select Room EQ Setup at the Auto Setup Room EQ 1 Auto Setup Room EQ 3 Remote control unit Auto Setup Manual EQ Setup g3 Room EQ Setup Mic Input Select 1 2 3 4 Direct Mode Setup 5 6 EQ Parameter Check Exit Display the Room EQ Setup screen 1 3 Room EQ Setup Relation To The Surround Mode WWMM Assign Remote control unit Select All or Assign e All The Equalizer to all Surround mode is set as once e Assign The Equalizer to each surround mode is to set individually 3 No Remote control unit When the All is selected and press the ENTER button display the Select the EQ Curve screen Select the Equalizer setting 4
52. E2 MAIN ZONE 5 1 channel systems i lt gt S F SYSTEM REMOTE CONTROL UNIT RC 975 SPEAKER cable EES ZONE2 VIDEO signal cable Refer to CONNECTIONS on pages 5 to 9 ZONE2 SPEAKER OUT v ZONE 2 VIDEO OUT 1 Outputting a program source to an amplifier etc in a different room ZONE2 mode 1 2 3 4 5 Press the POWER switch button am ON E OFF K Main unit Press the ZONE2 REC Kal SELECT button E The display switches as Main unit follows each time the button iS pressed ZONE2 t RECOUT FUNGTON With ZONE2 SOURCE displayed turn the O FUNCTION knob and select the source you wish to Main unit output e The display switches the selected source Start playing the source to be output e For operating instructions refer to the manuals of the respective components FUNCTION To cancel turn the function O knob and select SOURCE Main unit 00000000 0009 NOTES e The signals of the source selected in the ZONE2 mode are also output from the VCR 1 VCR 2 and CDR TAPE recording output jacks e Digital signals are not output from the ZONE2 audio output jacks e Refer to page 38 about the MULTI ZONE connections 2 Remote control unit operations during multi source playback selecting the input source This operation is not possible in
53. Input digital signals or select input jacks to which digital signals are being input Switch power off connect speakers properly then switch power back on Turn off the set s power then ventilate it well to cool it down Once the set is cooled down turn the power back on Turn off the set s power then ventilate it well to cool it down Once the set is cooled down turn the power back on Connect securely Connect securely Check left and right connections Set on screen display on the system setup menu screen to on When playing records Humming noise produced when Record is playing Howling noise produced when volume is high Ground wire of turntable not connected properly Incomplete PHONO jack connection TV or radio transmission antenna nearby Turntable and speaker systems too close together Floor is unstable and vibrates easily Connect securely Connect securely Contact your store of purchase Separate as much as possible Use cushions to absorb speaker vibrations transmitted by floor If turntable is not equipped with insulators use audio insulators commonly available Sound is distorted Volume is weak Stylus pressure too weak Dust or dirt on stylus Cartridge defective MC cartridge being used Apply proper stylus pressure Check stylus e Replace cartridge Replace with MM cartridge or use a head amplifier or step up transformer Tel
54. K ZONE2 SPEAKER SYSTEMS E ee ete eae ee ee Oe oe NEE a a J Protector circuit e This unit is equipped with a high speed protection circuit The purpose of this circuit is to protect the speakers under circumstances such as when the output of the power amplifier is inadvertently short circuited and a large current flows when the temperature surrounding the unit becomes unusually high or when the unit is used at high output over a long period which results in an extreme temperature rise When the protection circuit is activated the speaker output is cut off and the power supply indicator LED flashes Should this occur please follow these steps be sure to switch off the power of this unit check whether there are any faults with the wiring of the speaker cables or input cables and wait for the unit to cool down if it is very hot Improve the ventilation condition around the unit and switch the power back on If the protection circuit is activated again even though there are no problems with the wiring or the ventilation around the unit switch off the power and contact a DENON service center Connecting a Video game component e Connect the Video game component s output jacks to this unit s V AUX INPUT jacks OUTPUT OPTICAL VIDEO OUT S VIDEO O Se Le wn we Pee ve e la wn wm vm vm F SELECT vom CONTROL Note on speaker impedance VIDEO OUT DIGITAL OUT S VIDEO OUT SURROUND PARAMETER
55. Nos 1 3 Room EQ Setup Select the EQ Curve e OFF The Equalizer is not used Room EQ Normal gt Eeer e Normal Adjusts the frequency response of all speakers suitable for general surround system e Front Adjusts the characteristics of each speaker to the characteristics of the front speakers e Flat Adjusts the frequency response of all speakers flat This is suitable for music reproduction like ITU R speaker setting e Manual Selects the setting value that was set in the Manual EQ setup NOTES e The Equalizer setting of Normal Front and Flat can be selected after performing the Auto Setup e When the speaker set as None with the Auto Setup is change to on manually Front and Flat cannot be used the equalizer of Normal e The Equalizer setting can be selected by SURROUND PARAMETER button in Main unit or Remote control unit e When headphone is connected the Room EQ cannot be used Enter the setting The Auto Setup Room EQ Menu reappears Remote control unit 16 1 3 Setting the Room EQ Setup 1 4 Setting the Direct Mode Perform the ON OFF setting of Room EQ when the surround mode is Direct or Pure Direct 1 gt 3 Remote control unit Remote control unit 3 Not Remote control unit Select Direct Mode Setup at the Auto Setup Room EO Menu Display the Direct Mode Setup screen Select ON or OFF Remote control u
56. O OFF DOLBY PRO LOGIC II x O OFF DTS NEO 6 O OFF DOLBY DIGITAL SURROUND O OFF DTS SURROUND O OFF 5 7CH STEREO O OFF WIDE SCREEN O OFF SUPER STADIUM O OFF ROCK ARENA O OFF JAZZ CLUB O OFF CLASSIC CONCERT O OFF MONO MOVIE O OFF VIDEO GAME O OFF Signals and adjustability in the different modes Parameter default values are shown in parentheses When playing Dolby Digital and DTS signals LFE O OdB O OdB O OdB O OdB O OdB O OdB O OdB O OdB O OdB O OdB O OdB O OdB x x x x O x x xX O OO x x x x x O O O O OO 0 0 TONE CONTROL CINEMA CO ENGLISH x OFF O 0dB O O OFF O 0dB x VIRTUAL O OFF O 0dB x x O OFF O 0dB x x O Able O Adjustable x Unable x Not adjustable Note1 BASS 6 dB TREBLE 0 dB Note2 BASS 6 dB TREBLE 4 dB 59 ENGLISH pre gt preman pasro gt amer gt param sarooo gt pesmom row stereo veer Signals and adjustability in the different modes SURROUND PARAMETER PRO LOGIC II Il x ONLY NEO 6 MUSIC EXT IN DELAY SUBWOOFER CENTER CENTER TIME ON OFF SERGE MENON WIDTH IMAGE SCH ROOM SIZE EFFECT ON OFF EFFECT O OO O OO Q It O Adjustable x Not adjustable E Differences in surround mode names depending on the input signals Surround Mode ANALOG LINEAR PCM DTS 5 1 ch DTS 96
57. O OFF O OdB O OFF O 0aB O OFF O 0dB x O OFF O 0dB O Adjustable x Not adjustable Note1 BASS 6 dB TREBLE 0 dB Note2 BASS 6 dB TREBLE 4 dB x x x x OdB 0 O O O O O O x x x x x x x x x x x x x x x 47 ENGLISH S Signals and adjustability in the different modes 13 LISTENING TO THE RADIO e Check that the remote control unit is set to AMP or TUNER SURROUND PARAMETER PRO LOGIC H Il x ONLY XI X X X X X X XIX XIXI X X X X XxX x 2 NEO 6 MUSIC EXT IN SW ROOM SIZE EFFECT ON OFF EFFECT DELAY SUBWOOFER LEVEL ON OFF CENTER WIDTH PANORAMA DIMENSION CENTER IMAGE ATT DOLBY DIGITAL SURROUND Watching the display press the BAND button to select AM or BAND Remote control unit 3 MODE Remote control unit 4 TUNING TV VOL P the desired band FM 7 1 Set the input function to TUNER 1 ICH O 8 Main unit Remote control unit DTS NEO 6 OFF ON SOURCE O O OFF N ZONE 2 ZONE 1 MAIN ON OFF 0 DANI CABLE VDP S A uto r a p pe a rs O n th e MODE MEMORY BAND SHIFT d l Sp lay TUNER TUNING TV VOL Press the TUNING or 1 button VCR 1 VCR 2 ffe ba ERR x Press the MODE button to set the auto tuning mode ffe D 2j 2 x ER Oo D 2 x Q D 2 x
58. OMPONENT x x x x X x X X 7 COMPONENT COMPONENT COMPONENT COMPONENT x x X x x MONITOR OUT COMPONENT S VIDEO VIDEO S VIDEO S VIDEO S VIDEO S VIDEO S VIDEO S VIDEO x x x S VIDEO S VIDEO S VIDEO S VIDEO te X i O i x X x x x i O O VIDEO O l x l x x lt a E EE ee O x O Signal input x No signal x Not output COMPONENT On screen display only displayed for SYSTEM SETUP SURR PARA and ON SCREEN buttons 1 On screen display superimposed on video signal and output 2 On screen display superimposed on S video signal and output 3 The on screen display is not displayed when a cable is connected to the S VIDEO monitor output terminal SPECIFICATIONS E Audio section Power amplifier Rated output Dynamic power Output terminals Analog Input sensitivity input impedance Frequency response S N Distortion Rated output Digital D A output Digital input Front 100 W 100 W 8 Q ohms 20 Hz 20 kHz with 0 05 T H D 135 W 135 W 6 Q ohms 1 kHz with 0 7 T H D Center 100 W 8 Q ohms 20 Hz 20 kHz with 0 05 T H D 135 W 6 Q ohms 1 kHz with 0 7 T H D Surround 100 W 100 W 135 W 135 W 6 Q ohms 1 kHz with 0 7 T H D Surround back 100 W 100W 8 Q ohms 20 Hz 20 kHz with 0 05 T H D 135 W 135 W 6 Q ohms 1 kHz with 0 7 T H D 120Wx2 ch 8 Q ohms 170Wx2 ch 4 Q ohms 200 W
59. R CB and Y Ba B Y and Y Pr Pb and Y etc For EI ob i S details carefully read the operating instructions included with the TV or other ml component AN Bang Zen ech 2 Connecting the video decks MONITOR OUT jack Ze E lo Cen ER e Connect the video decks S output jack S OUT to the W SOR PE e i z j i j i E j P ED ve i ER VCR 1 IN jack and the video decks S input jack S IN to the Os 33 The AVR 2805 is equipped with a function for up converting video signals H CAS r S D VCR 1 OUT jack using S Video connection cords FRONT ae SURROUND SLBA ZONE 2 Ze Sor Because of this the AVR 2805 S MONITOR OUT jack can be connected to the E E E A a e Connect the video decks S output jack S OUT to the SE pas monitor TV with a set of cables offering a higher quality connection Xo ee VCR 2 IN jack and the video decks S input jack S IN to the Ge regardless of how the player and the AVR 2805 s video input jacks are DN ee VCR 2 OUT jack using S Video connection cords cart connected Generally speaking connections using the component video jacks offer the S weng HE eq sc ROPE END highest quality playback followed by connections using the S Video jacks then connections using the regular video jacks yellow Video deck 2 NOTE Down converting from the component video signal to the S Video and composite video signal is not possible so when not With the AVR 2805 the Video sig
60. RS INFO SPORT EDUCATE DRAMA Next 2 Tune by preset Up Down CHB5 FM105 50Mh This is the screen when operated Set the input function to TUNER TUNER Remote control unit RDS Press the RDS button until TP SEARCH appears on RETU the display Remote control unit x The main unit s display switches as follows each time the RDS buttons are pressed Display RDS New tuning system for your convenience 1 Push RDS ROS RDS station PTY Program category Traffic info RT Radio Text 2 Tune by preset Up Down CHB5 FM105 50MHz This is the screen when operated CHANNEL Press the CHANNEL UP or DOWN button TP search begins Remote control unit If no TP station is found with above operation all the reception bands are searched The station name is displayed on the display after searching stops To continue searching repeat step 3 If no other TP station is found when all the frequencies are searched NO PROGRAMME is displayed RDS New tuning system for your convenience 1 Push ROS ROS RDS station PTY Program category P Traffic info RT Radio Text 2 Tune by preset Up Down CHB5 FM105 50MH This is the screen when operated o O ENGLISH Use this function to find RDS sta
61. Set SP Back at the system set up to None Dolby Pro Logic IIx Pro Logic II mode Display To play in the PL IIx mode set Sp Back at the Speaker Configuration setting to 1Spkr or 2Spkrs To play in the PL IIx mode set Surround Back at the Power Amp Assign setting Pro LogicII Cinema mode Pro LogicII Music mode Pro Logic Game mode Dolby Pro Logic mode 1 aa ae The Dolby Surround 8 ER Pro Logic Ix Cinema 5 Select the parameter to change See Surround parameters for a description of each parameter 0 5 or Music mode can be nan Peas aaa ES chosen EE DOLBY PL IIx DOLBY PL IIx MUSIC Steeg i INEMA MINI Sc pressing e Eg V B af OPT ONAL PARAMETERS b KN WE i eo G eats PANORAMA o 4 gt Siig 000000000 6650 CO CO the remote control ep Ser dE i unit during playback in een UH EQ TONE lt DIMENSION 3 l the Dolby Pro Logic PARAMETER H IIx See SB CH OUT CENTER WIDTH 4 3 gt 3 5 1 4 6 CHANNEL SP r Ty t Yes 5 Main unit Remote control unit Ex DOLBY PLIIx music mode screen SURROUND PARAMETER Select the Dolby Pro Logic IIx mode 1 d S When set with the on screen display using the remote control unit while in the MUSIC mode set the DG mark to OPTION using the CURSOR up and down buttons
62. Subwoofer Surround Sp regular speakers LARGE for full size full range to automatically set the composition of the signals output from the speakers and the frequency Large Small Yes Small Small 2spkrs response This parameter is for optimizing the timing with Front L amp R Center Subwoofer Surround L amp R SBL amp SBR 2 Delay Time which the audio signals are produced from the Speaker Configuration speakers and subwoofer according to the listening position 3 6 m 12 ft 3 6 m 12 ft 3 6 m 12 ft 3 0 m 10 ft 3 0 m 10 ft Channel This adjusts the volume of the signals output from Front L Front R Center SE GE Ki Sabwaoter 3 Level the speakers and subwoofer for the ir ac ac channels in order to obtain optimum effects ec aeons Set the frequency Hz below which the bass so of the various speaker is to be output from the 80Hz subwoofer Crossover Frequency Subwoofer This selects the subwoofer speaker for playing LFE Mode deep bass signals 3 Input Setup Input Setup Default settings Input cp pvp vop mv pes v aux veRr 1 vcr 2 COR This assigns the digital input jacks for the Sounge TAPE different input sources Digital Inputs COAX1 COAX2 OPT1 OFF OPT2 OPT5 OPT3 OFF OPT4 Digital In Assignment Ext In Subwoofer Level Set the Ext In Subwoofer terminal playback Subwoofer 15 dB level gJ LISH DV VDP TV DBS VCR 1 VCR 2 V AUX
63. Surround are indicated with the logo mark shown below LD VDP Coaxial Dolby ae RF output jack Set the ae ee AUTO Dolby Surround support mark DE Poy surrounp X age DVD Optical or coaxial digital output Set the input mode to AUTO Manufactured under license from Dolby Laboratories same as for PCM X 2 Page 34 Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories Others Optical or coaxial digital output Set the input mode to AUTO satellite broadcasts CATV etc same as for PCM Page 34 x 1 Please use a commercially available adapter when connecting the Dolby Digital RF output jack of the LD player to the digital input jack Please refer to the instruction manual of the adapter when making connection Xx 2 Some DVD digital outputs have the function of switching the Dolby Digital signal output method between bit stream and convert to PCM When playing in Dolby Digital surround on the AVR 2805 switch the DVD player s output mode to bit stream In some cases players are equipped with both bit stream PCM and PCM only digital outputs In this case connect the bit stream PCM jacks to the AVR 2805 55 ENGLISH DTS Digital Surround Digital Theater Surround also called simply DTS is a multi channel digital signal format developed by Digital Theater Systems DTS offers the same 5 1 playback channels as Dolby Digital front le
64. System ec cccc cece wees 11 28 16 Troubleshooting ER 52 53 D Remote Control Unit eege eg 29 33 17 Additional WTONMAUON scrcecsirconoswaretsrcsuuacwones 53 60 9 Operation EE 34 37 18 ele E 61 E ACCESSORIES Check that the following parts are included in addition to the main unit 5 R6P AA batteries 6 AM loop antenna FM indoor antenna Omnidirectional microphone Operating instructions 2 Service station list 3 AC cord 4 Remote control unit RC 975 1 BEFORE USING Pay attention to the following before using this unit e Moving the set To prevent short circuits or damaged wires in the connection cords always unplug the power cord and disconnect the connection cords between all other audio components when moving the set e Before turning the power switch on Check once again that all connections are proper and that there are not problems with the connection cords Always set the power switch to the standby position before connecting and disconnecting connection cords ENGLISH e Store this instructions in a safe place After reading store this instructions along with the warranty in a safe place e Note that the illustrations in this instructions may differ from the actual set for explanation purposes e V AUX terminal The AVR 2805 s front J panel is equipped with a pN V AUX terminal Remove the cap covering the terminal when you want to use it
65. The characteristics of each speaker can also be corrected Multi Zone Music Entertainment System Multi Source Function This unit s Multi Source function lets you select different audio sources for listening Different sources can thus be enjoyed in the main room MAIN and the subroom ZONE2 simultaneously Future Sound Format Upgrade Capability via Eight Channel Inputs amp Outputs For future multi channel audio format s the AVR 2805 is provided with 7 1 channel seven main channels plus one low frequency effects channel inputs along with a full set of 7 1 channel pre amp outputs controlled by the 8 channel master volume control This assures future upgrade possibilities for any future multi channel sound format Front input Terminal The unit is equipped with a Front Input connector for the convenient connection of a video camera or other equipment Video Conversion Function The AVR 2805 is equipped with a function for up converting video signals Because of this the AVR 2805 s MONITOR OUT jack can be connected to the monitor TV with a set of cables offering a higher quality connection regardless of how the player and the AVR 2805 s video input jacks are connected 13 14 15 16 17 18 19 20 Component Video Switching In addition to composite video and S video switching the AVR 2805 provides 3 sets of component video Y PB CsB PR CR inputs and one set of component video ou
66. Y Program category P Traffic info RT Radio Text 2 Tune by preset Up Down This is the screen when operated Watching the display press the CURSOR left and right buttons to call out the desired program type RDS PTY 1 Select category by 4 gt button NEWS AFFAIRS INFO SPORT EDUCATE DRAMA Next 2 Tune by preset Up Down CHB5 F105 5OMhHz Remote control unit This is the screen when operated CHANNEL Press the CHANNEL UP or DOWN button to automatically begin the PTY search operation Remote control unit If there is no station broadcasting the designated program type with above operation all the reception bands are searched The station name is displayed on the display after searching stops ON SOURCE LEARNED TX O ZONE 2 ZONE 1 MAIN ON OFF ON OFF gaus GaGa e GD CABLE VDP MODE MEMORY BAND SHIFT 2 x gt z 2 Ed D S P Se STANDARD SIMULATION OOO PUREDIRECT DIRECT smsen WV SURROUND PARAMETER ON SCREEN DISPLAY FRONT SURROUND INPUT USE LEARN O DENON RC 975 To continue searching repeat step 4 If no other station broadcasting the designated program type is found when all the frequencies are searched NO PROGRAMME is displayed RDS P T Y IS 1 Select category by gt button HNM ARA NEWS AFFAI
67. aced with new ones 2 Operate the audio component approximately once a year though this depends on e For details refer to the component s operating instructions the frequency of usage It may not be possible to operate some models e Even if less than a year has passed replace the batteries with new ones if the set does not operate even when the remote control unit is operated nearby the set The included battery is only for verifying operation Replace it with a new battery as Set three R6P AA batteries in the battery soon as possible 1 CD player CD system buttons 2 compartment in the indicated direction e When inserting the batteries be sure to do so in the wince A Sikes BS OO proper direction following the o and marks 9 OOO gt Play in the battery compartment CIOD l e To prevent damage or leakage of battery fluid ea e l Stop a e Do not use a new battery together with an old D D ma l Auto searen o baginning of tracki ane y tog i lt lt gt gt Manual search forward and reverse e Do not use two different types of batteries en F t ee eegene e Do not short circuit disassemble heat or Ons l a y dispose of batteries in flames S o BE e Remove the batteries from the remote control unit when you do not plan to use it for an extended 2 Tape deck TAPE system buttons period of time e f the battery fluid should leak carefully wipe the O
68. and Front can be selected after performing the Auto Setup e When headphone is connected the Room EQ cannot be used 1 Press the surround parameter button Display the surround parameter screen The screen selected surround mode ROCK ARENA ROOM SIZE 4medium gt e Operate the Room EQ from the main unit 2 Select EQ appears l l S EFFECT 10 gt TONE cannot be selected in the Direct PARAMETER E mode DISC SKIP i det OFF d Omme a SB CH OUT SYSTEM SURROUND 4 gt OFF DEE 00000000 Main unit SURROUND rROOM SIZE PARAMETER amedium gt EFFECT 410 gt ME GU EQ TONE lt Remote control unit Ax SS Se S ch FRONT SURROUND Default Yes lt 1 SURROUND Press the SURROUND 3 SELECT Select the Equlizer setting PARAMETER button RRE A e Display the surround O RC 975 parameter screen Main unit Main unit 46 e Operate the tone control from the main unit 1 The tone switches as follows each time the Qe0000000 6eOE TONE CONTROL button is pressed o I E 2 1 a BASS ak TREBLE 2 Select with the name of the volume to be adjusted and adjust the level Main unit e To increase the bass or treble Turn the control clockw
69. aparound effect with side wall imaging Select OFF or ON Dimension Control This control gradually adjust the soundfield either towards the front or towards the rear The control can be set in 7 steps from 0 to 6 Center Width Control This control adjust the center image so it may be heard only from the center speaker only from the left right soeakers as a phantom image or from all three front speakers to varying degrees The control can be set in 8 steps from 0 to 7 Pro Logic This mode offers the same robust surround processing as original Pro Logic in case the source contents is not of optimum quality Game This mode for playing games The game mode can only be used with 2 channel audio sources Surround parameters 2 DTS NEO 6 Mode e Cinema This mode is optimum for playing movies Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2 channel sources as with 6 1 channel sources This mode is effective for playing sources recorded in conventional surround formats as well because the in phase component is assigned mainly to the center channel C and the reversed phase component to the surround SL SR and SB channels e Music This mode is suited mainly for playing music The front channel FL and FR signals bypass the decoder and are played directly so there is no loss of sound quality and the effect of the surround signals output from the center C and su
70. as DVD videos and CDs Thus with DTS 96 24 the same 96 kHz 24 bit multi channel surround sound as with DVD Audio can be achieved while viewing DVD Video images on a conventional DVD Video player 1 Furthermore with DTS 96 24 2 Speaker Setup compatible CDs 88 2 kHz 24 bit multi channel surround can be achieved using normal CD LD players x 1 Speaker Setup Default settings Even with the high quality multi channel signals the recording time is the same as with conventional DTS surround sources What s more DTS 96 24 is fully compatible with the conventional DTS surround format so DTS 96 24 signal sources can be played with a sampling frequency of 48 kHz or 44 1 kHz on conventional DTS or DTS ES surround decoders 2 Input the combination of speakers in your Surround Back system and their corresponding sizes SMALL for Front Sp Center Sp Subwoofer Surround Sp Sp Speaker regular speakers LARGE for full size full range to Configuration automatically set the composition of the signals output from the speakers and the frequency Large Small Yes Small Small 2spkrs response This parameter is for optimizing the timing with Front L amp R Center Subwoofer Surround L amp R SBL amp SBR Delay Time which the audio signals are produced from the y speakers and subwoofer according to the listening position 3 6 m 12 ft 3 6 m 12 ft 3 6 m 12 ft 3 0 m 10 ft 3 0 m 10 ft Subwoofer 1 A DVD player with DTS digita
71. candles should e No objects filled with liquids such as vases shall be be placed on the apparatus placed on the apparatus m We greatly appreciate your purchase of the AVR 2805 m To be sure you take maximum advantage of all the features the AVR 2805 has to offer read these instructions carefully and use the set properly Be sure to keep this manual for future reference should any questions or problems arise SERIAL NO _ PLEASE RECORD UNIT SERIAL NUMBER ATTACHED TO THE REAR OF THE CABINET FOR FUTURE REFERENCE E INTRODUCTION Thank you for choosing the DENON AVR 2805 Digital A V Surround Receiver This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD as well as providing outstanding high fidelity reproduction of your favorite music sources As this product is provided with an immense array of features we recommend that before you begin hookup and operation that you review the contents of this manual before proceeding TABLE OF CONTENTS 1 Sen e rreren 3 10 Multi e e ete onthe conse REEKS SSS rr REEE REESS 38 39 H Cautions on MS E e E 3 11 TEE 39 44 3 Cautions on Handling ssssseseseeereeriierrrrrrrrrrrrrren 3 12 DSP Surround Simulation E 45 48 Al ET 4 13 Listening to the Radio E 48 52 5 elek EE 5 9 14 Last neren ue EE 52 D Part Names and Functions Abee 9 10 15 Initialization of the Microprocesseor 52 7 Setting up the
72. ck 1 The pre out output including the speaker output is automatically turned off when headphone are connected NOTE To prevent hearing loss do not raise the volume level excessively when using headphone 3 Turning the sound off temporarily MUTING CDO VER CHANNEL t ZE 01 URROUND PARAMETER 1 WG Use this to mute the audio Ee output temporarily Press the MUTING button Remote control unit x The Muting level is the same level as set with 5 5 Setting the Muting Level x Cancelling MUTING mode Press the MUTING button again 4 Combining the currently playing sound with the desired image EEN Display 1 Simulcast playback Use this switch to monitor a video source other than the audio source Press the VIDEO SELECT button turn the FUNCTION knob until the desired source appears on the display FUNCTION SELE Main unit Main unit x Cancelling simulcast playback e Select SOURCE using the VIDEO SELECT button and the FUNCTION button e Switch the program source to the component connected to the video input e Press the SOURCE button 5 Checking the currently playing program source etc FRONT SURROUND INPUT USE LEARN DENON RC 975 1 Front panel display e Descriptions of the unit s operations are also displayed on the front panel display In a
73. ck 13 G TUNING PRESET bUttON wrest a3 GB SURROUND MODE button Bi SOURCE button nn 34 ENGLISH INPUT SIGNAL indicator The respective indicator will light corresponding to the input signal 2 INPUT SIGNAL CHANNEL indicator The channels included in the input source will light This displays bitstream signal channel This does not light when signals are being input to the ANALOG or EXT IN connectors Information display This displays the surround mode function name or setting value etc O OUTPUT SIGNAL CHANNEL indicator The audio channels output from this unit will light SPEAKER indicator This lights corresponding to the settings of the front speakers QO Decoder indicator This lights when each decoder is operating MASTER VOLUME indicator This displays the volume level The Setup item number is displayed in System Setup MULTI ZONE indicator 10 ZONE2 mode is selected in ZONE2 REC SELECT D 8 e 8 e Display TEEN A rm mm mm mm GEES bm m GE d py a 6 ing KA LOCH E B Ser REC OUT SOURCE indicator REC OUT mode is selected SELECT AL24 indicator The AL24 indicator lights when the PURE DIRECT DIRECT and STEREO mode is selected in the PCM input signal INPUT MODE indicator This lights corresponding to the setting of the INPUT mode AUTO indicator This lights when the broadcast station is selected in the AUTO tuning mode
74. ck Menu reappears Remote control unit Remote control unit 3 x Contents stored in the auto surround mode can be checked with the on screen display Auto Surround Mode ANALOG 2ch STEREO ON SCREEN Remote control unit DISPL DIGITAL 2ch DOLBY PL IIx cine 5 1ch DOLBY DTS SURROUND Remote control unit OSD 3 Remote control unit Remote control unit Remote control unit Select Option Setup at the System Setup Menu Auto Setup Room EQ Speaker Setup Input Setup Advanced Playback Option Setup Exit Display the Option Setup Menu Screen 5 1 Setting the Power Amplifier Assignment Make this setting to switch the power amplifier for the surround back channel to ZONE2 If ZONE2 is selected the signal that selected at ZONE2 Is output at SURR BACK ZONE2 PREOUT terminals Select Power Amp Assign at the Option Setup Menu 5 Option Setup F1 Power Amp Assign Zone2 Vol Level Trigger Out 1 Setup Trigger Out 2 Setup Muting Level On Screen Display Setup Lock Press the ENTER button Display the Power Amp Assign screen Select Surround Back to use as the surround back channel Zone2 to use as Zone out 5 1 Power Amp Assign 5 1 Power Amp Assign NAME 4 gt Zone 3 Surroundback 4 MAEA Log Dm Lie Ba 4
75. contact your store of purchase e Check the insertion of the power o fe 6b Bei gt n O CH Wel O a Q gt LL CH E Yn O T Bo O b O O 09 oc E Q O O Be O Pr D E Cc O Past 2 C oO 3 n H Q O k Q C O E O O DISPLAY not lit and sound not produced when power switch set to on DISPLAY lit but sound not produced DISPLAY not lit and power indicator is flashing rapidly Sound produced only from one channel Positions of instruments reversed during stereo playback The on screen display is not displayed Power cord not plugged in securely Speaker cords not connected Improper position of the audio function button Volume control set to minimum MUTING is on Digital signals not input Digital input selected securely Speaker terminals are short circuited Block the ventilation holes of the set The unit is operating at continuous high power conditions and or inadequate ventilation Incomplete connection of speaker cords Incomplete connection of input output cords Reverse connections of left and right speakers or left and right input output cords On screen display is set to off on the system setup menu screen cord plug Turn the power on with the remote control unit after turning the POWER switch on e Connect securely Set to a suitable position Turn volume up to suitable level Switch off MUTING
76. ct the surround mode while adjusting the surround parameters or tone control press the Remote control unit surround mode button then operate the selector Gn BOR 2 Press the SURROUND PARAMETER button 3 Display the parameter you want to adjust then Press and hold in the surround parameter turn the SELECT knob to set it Remote control unit Remote control unit button to select the parameter you want to set e The parameters which can be set differ for the different surround modes Refer to 4 See EAS ere ae J Enter the setting Surround Modes and Parameters on page NOTE e AN Ge The surround parameter A7 e When playing PCM digital signals or analog lt a gt PS signals in the DOLBY PRO LOGIC I DTS NEO 6 SO age ANSON PARAMETER modes and the input signal switches to a digital UC Remote control unit Ge signal encoded in Dolby Digital the Dolby o gt Tone Deteat Milt surround mode switches automatically When the input signal switches to a DTS signal the EES EEN H PARAMETER HS a eae ae Mannie mode automatically switches to DTS surround Room EQ Tone control setting e Use the Room EOQ setting and the tone control setting to adjust the bass and treble as desired e Operate the Room EQ and the tone control from the remote control unit PARAMETER button again OFF Normal od Manual lt gt Flat Remote control unit NOTES e The equalizer setting of Normal Flat
77. ction l _ a CHANNEL Preset channel up down e Neon signs or other devices emitting pulse type Default setting CDR RDS lt ADS search noise nearby may result in malfunction keep X The tuner can be operated in the amplifier CD CDR MD or the set as far away from such devices as possible TAPE mode 29 ENGLISH Preset memory The included remote control unit can be used to operate devices of different brands by registering the preset number corresponding to the brand of your device For some models the remote control unit or the device may not operate properly In this case use the learning function page 31 to store your device s remote control signals in the included remote control unit ON SOURCE i ZONE 2 ZONE 1 MAIN FF ON OFF ON OFF ON SOURCE I SE Se i mm mm mm mm mm mm Fv MODE MEMORY BAND SHIFT 2 Press the mode button of the equipment that is to be entered to a preset memory e The mode button flashes 1 Press the power ON SOURCE button and the OFF button at the same time e The LEARNED TX indicator flashes wm bm bm SE zm nn Ore sTANDARO Buet MMSE Eu CABLE vP N STEREO Stee PURE DIRECT DIRECT 3 Referring to the included List of Preset Codes use the number buttons to input the preset code a 4 digit number for the manufacturer of the component whose signals you want to store in the memory EE O ooo 4 When stored correctly the
78. ction provides approximately one week of memory storage from when the main unit s power switch is off and with the power cord disconnected 15 INITIALIZATION OF THE MICROPROCESSOR When the indication of the display is not normal or when the operation of the unit does not shows the reasonable result the initialization of the microprocessor is required by the following procedure 1 Switch off the unit using the main unit s power operation switch 2 Hold the following INPUT MODE button and ANALOG button and turn the main unit s power operation switch on 3 Check that the entire display is flashing with an interval of about 1 second and release your fingers from the 2 buttons and the microprocessor will be initialized NOTES e f step 3 does not work start over from step 1 e f the microprocessor has been reset all the settings are reset to the default values the values set upon shipment from the factory O 61000000 006OUD TROUBLESHOOTING If a problem should arise first check the following table 1 Are the connections correct 2 Have you operated the receiver according to the Operating Instructions 3 Are the speakers turntable and other components operating property If this unit is not operating properly check the items listed in the table below Should the problem persist there may be a malfunction Disconnect the power immediately and
79. ddition the display can be switched to check the unit s operating status while playing a source by pressing the STATUS button STATUS Main unit Using the dimmer function e Use this to change the brightness of the display The display brightness changes in four steps bright medium dim and off by pressing the main unit s DIMMER button repeatedly DIMMER Main unit On screen display eEach time an operation is performed a description of that operation appears on the display connected to the units VIDEO MONITOR OUT jack Also the unit s operating status can be checked during playback by pressing the remote control unit s ON SCREEN button Such information as the position of the input selector and the surround parameter settings iS Output in Sequence ON SCREEN DISPL Remote control unit ENGLISH Multi source recording playback Playing one source while recording another REC OUT mode 1 Press the ZONE2 REC SELECT button ZONI REC SEI Main unit With RECOUT SOURCE displayed turn the FUNCTION knob to select the source you wish to record e When the FUNCTION goes around it turn to the REC indicator and the indicator of the selected source light FUNCTION O Main unit Set the recording mode e For operating instructions refer to the manual of the component on which you want to record To cancel turn the function knob and select SOURCE FUNCTION
80. dringen Uts tt inte apparaten f r fukt vatten och damm Unplug the power cord when not using the set for long periods of time Wenn das Ger t eine l ngere Zeit nicht verwendet werden soll trennen Sie das Netzkabel vom Netzstecker D brancher le cordon d alimentation lorsque l appareil n est pas utilis pendant de longues p riodes Disinnestate il filo di alimentazione quando avete l intenzione di non usare il filo di alimentazione per un lungo periodo di tempo Desconecte el cord n de energ a cuando no utilice el equipo por mucho tiempo Neem altijd het netsnoer uit het stopkontakt wanneer het apparaat gedurende een lange periode niet wordt gebruikt Koppla ur n tkabeln om apparaten inte kommer att anv ndas i l ng tid For sets with ventilation holes Do not obstruct the ventilation holes Die Bel ftungs ffnungen d rfen nicht verdeckt werden Ne pas obstruer les trous d a ration Non coprite i fori di ventilazione No obstruya los orificios de ventilaci n De ventilatieopeningen mogen niet worden beblokkeerd T pp inte till ventilations ppningarna Do not let foreign objects in the set Keine fremden Gegenst nde in das Ger t kommen lassen Ne pas laisser des objets trangers dans l appareil E importante che nessun oggetto inserito all interno dell unit No deje objetos extra os dentro del equipo Laat geen vreemde voorwerpen in dit apparaat vallen Se till att fr mmande f
81. e e Replace with new batteries Move closer e Batteries dead Remote control unit too far from this unit This unit does not operate properly when remote control unit is used Obstacle between this unit and Remove obstacle remote control unit Different button is being pressed e and O ends of battery inserted in reverse Press the proper button Insert batteries properly Remote control unit ADDITIONAL INFORMATION Optimum surround sound for different sources There are currently various types of multi channel signals signals or formats with more than two channels E Types of multi channel signals Dolby Digital Dolby Pro Logic DTS high definition 3 1 signals Japan MUSE Hi Vision audio DVD Audio SACD Super Audio CD MPEG multi channel audio etc Source here does not refer to the type of signal format but the recorded content Sources can be divided into two major categories Types of sources e Movie audio Signals created to be played in movie theaters In general sound is recorded to be played in movie theaters equipped with multiple surround speakers regardless of the format Dolby Digital DTS erch Movie theater sound field Listening room sound field In this case it is important to achieve the same sense of expansion as in a movie theater with the surround channels To do so in some cases the number of surround speakers is increased to four or eight or speakers wi
82. e ha gt oO l CboboboObO Decoder with 8 or 6 channel O analog output a C oo Xx For instructions on playback using the external input EXT IN jacks See page 35 ENGLISH Connecting the MULTI ZONE jacks x For instructions on operations using the MULTI ZONE FUNCTIONS See pages 38 39 1 ZONE2 preout CONNECTIONS e H another power amplifier or pre main integrated amplifier or is connected the ZONE2 preout variable fixed level jacks can be used to play a different program source in ZONE2 the same time See page 38 e The ZONE2 video out is only for the ZONE2 INFRARED RETRANSMITTER Integrated pre main amplifier or power amplifier INFRARED SENSOR h AUX OUT ei z q DP sgh VDP AC OUTLET AC 230V 50Hz SWITCHED 100W MAX fe 2 G e 2 OPT 3 OPT 2 MOTE CONTROL ol fol I e ne a o EI 5 3 OOO0E 0606 5 EJ IN ROOM TO ROOM our DPI 5 3 SE o o o o E Ed EES QOO C E Q0 Oe SURROUND CENTER AORB 6 16Q SPEAKER SYSTEMS SPEAKER IMPEDANCE SURR BACK ZONE 2 6 16Q FRONT yg Go TRIGGER OUT 1 DC 12V 25mA MAX 2 DAN 5 o o CHR EI z SE ZE TRIGGER OUT 2 DC 12V 25mA MAX
83. e control unit 1 Digital video disc player DVD DVD SETUP system buttons LEARNED TX Bb gt alo ale m lt E 3 Ss Ss m z m Ss Ed z w gt 2 E O O 2 D D Gil Gre lt S o E a o Ei EJ S ka Ei Ge JODE SELECT LIGHT FRONT INPUT oa 7 mone ANALOG USE LEARN O DENON RC 975 Zone C mr CD Cw CS ON SOURCE PA o ap a Fe g 2 Z 5 2 Ss 0 oC H a D STANDARD ME simion PUREDIRECT DIRECT stereo WR SURROUND PARAMETER SURROUND AN 0 a0 ON SOURCE LEARNED TX DBS CDR TAPE 2 Video disc player VDP system buttons POWER Power on standby ON SOURCE 0 9 10 10 key gt Play E Stop lt lt PI Auto search to beginning of track lt lt PF Manual search forward and reverse H Pause DISC SKIP Disc skip for DVD changer only SETUP Setup MENU gt Menu DISPLAY Display RETURN Return A Tak Cursor up down left and right ENTER gt Enter POWER Power on standby ON SOURCE 0 9 10 10 key gt Play W Stop lt lt PI Auto search cue lt lt PF Manual search forward and reverse H Pause ON SOURCE LEARNED TX zone Cm Gam Gen O CABLE VDP MODE MEMORY BAND SHIFT 2 HONO o Ki S 2 nm a 4 2 a 3 lt S OG OG D STANDARD aM e
84. e noise Before playing DTS signals for the first time turn down the master volume to a low level start playing the DTS disc then check whether the DTS indicator on the AVR 2805 see page 35 lights before turning up the master volume 3 A DVD player with DTS compatible digital output is required to play DTS DVDs A DTS Digital Output logo is featured on the front panel of compatible DVD players Recent DENON DVD player models feature DTS compatible digital output consult the player s owner s manual for information on configuring the digital output for DTS playback of DTS encoded DVDs MANUFACTURED UNDER LICENSE FROM DIGITAL THEATER SYSTEMS INC U S PAT NO S 5 451 942 5 956 674 5 974 380 5 978 762 6 226 616 6 487 535 AND OTHER U S AND WORLD WIDE PATENTS ISSUED AND PENDING DTS DTS ES Neo 6 AND DTS 96 24 ARE TRADEMARKS OF DIGITAL THEATER SYSTEMS INC 1996 2003 DIGITAL THEATER SYSTEMS INC ALL RIGHTS RESERVED 56 DTS ES Extended Surround DTS ES Extended Surround is a new multi channel digital signal format developed by Digital Theater Systems Inc While offering high compatibility with the conventional DTS Digital Surround format DTS ES Extended Surround greatly improves the 360 degree surround impression and space expression thanks to further expanded surround signals This format has been used professionally in movie theaters since 1999 In addition to the 5 1 surround channels FL FR C
85. e or any other set up is changed If the volume is turned up during this time the output will be very high after the muting circuit stops functioning Always wait until the muting circuit turns off before adjusting the volume e Whenever the unit is in the STANDBY state the apparatus is still connected on AC line voltage Please be sure to turn the power off Moff when you leave home for say a vacation ENGLISH 4 FEATURES 1 Dolby Digital Using advanced digital processing algorithms Dolby Digital provides up to 5 1 channels of wide range high fidelity surround sound Dolby Digital is the default digital audio delivery system for DVD and North American DTV Dolby Pro Logic IIx compatibility Dolby Pro Logic IIx furthers the matrix decording technology of Dolby Pro Logic II to decode audio signals recorded on two channels into up to 7 1 playback channels including the surround back channel Dolby Pro Logic IIx also allows 5 1 channel sources to be played in up to 7 1 channels The mode can be selected according to the source The Music mode is best suited for playing music the Cinema mode for playing movies and the Game mode for playing games The Game mode can only be used with 2 channel audio SOUICeS Dolby Pro Logic I Game mode compatibility In addition to the previously offered Music and Cinema modes the AVR 2805 also offers a Game mode optimum for games DTS Digital Theater Systems DTS provides up
86. e quando installate l unit in un mobile per componenti audio Evite altas temperaturas Permite la suficiente dispersi n del calor cuando est instalado en la consola Vermijd hoge temperaturen Zorg voor een degelijk hitteafvoer indien het apparaat op een rek wordt geplaatst Undvik h ga temperaturer Se till att det finns m jlighet till god v rmeavledning vid montering ett rack Handle the power cord carefully Hold the plug when unplugging the cord Gehen Sie vorsichtig mit dem Netzkabel um Halten Sie das Kabel am Stecker wenn Sie den Stecker herausziehen Manipuler le cordon d alimentation avec pr caution Tenir la prise lors du d branchement du cordon Manneggiate il filo di alimentazione con cura Agite per la spina quando scollegate il cavo dalla presa Maneje el cord n de energ a con cuidado Sostenga el enchufe cuando desconecte el cord n de energ a Hanteer het netsnoer voorzichtig Houd het snoer bij de stekker vast wanneer deze moet worden aan of losgekoppeld Hantera n tkabeln varsamt H ll i kabeln n r den kopplas fr n el uttaget Keep the set free from moisture water and dust Halten Sie das Ger t von Feuchtigkeit Wasser und Staub fern Prot ger l appareil contre l humidit l eau et lapoussi re Tenete l unit lontana dall umidit dall acqua e dalla polvere Mantenga el equipo libre de humedad agua y polvo Laat geen vochtigheid water of stof in het apparaat binnen
87. eo terminals even when ZONE is set to OFF MULTI ROOM MUSIC ENTERTAINMENT SYSTEM Multi zone playback using the ZONE2 PRE OUT terminals E When using the SURR BACK amplifier as the SURROUND BACK The AVR 2805 is equipped with pre out terminals for which the volume is adjustable ZONE2 and composite video output terminals as the ZONE2 output terminals System configuration and connections example Using external amplifier MAIN ZONE 7 1 channel systems 7 2 R Monitor EL Center ann BBB BBB Bees PA BEB BBB RBBB DVD player This unit aile ZONE2 AUDIO OUT Esc VARIABLE OUT k SBR Pre main amplifier or power amplifier SYSTEM REMOTE SBL CONTROL UNIT RC 975 eee MULTI SOURCE AUDIO signal cable iowa ZONE2 VIDEO signal cable Refer to CONNECTIONS on pages 5 to 9 38 E When using the SURR BACK amplifier as the ZONE2 e ZONE speaker out can be used when ZONE2 is selected at System Setup Menu Power Amp Assign In this case Surround Back PREOUT and speaker out cannot be used for MAIN ZONE e The AVR 2805 is equipped with preout terminals for which the volume is adjustable ZONE2 and speaker out terminals for which the volume is adjustable ZONE2 and composite video output terminals as the ZONE2 output terminals System configuration and connections example Using this unit s internal amplifier as the ZON
88. er in weak central sound unclear orientation of the surround and surround back speakers various instruments and the sense of direction of e Be careful when using two pairs of front speakers Integrated pre main amplifier INFRARED aR ITE the stereo being impaired A B at the same time since use of speakers ee amplifier SENSOR e When making connections take care that none of with an impedance of less than 8 Q ohms will lead EE pa SCH the individual conductors of the speaker cord come to damage in contact with adjacent terminals with other e The protector circuit may be activated if the set is speaker cord conductors or with the rear panel played for long periods of time at high volumes when speakers with an impedance lower than the O O WE Or IER r NOTE specified impedance are connected oy NEVER touch the speaker terminals when the nO O O O SH EE power is on Ge Sech SN Doing so could result in electric shocks oe one nd Connecting the speaker terminals eS oS A e Ne OG d mj EL EL SI z 3 SPEAKER IMPEDANCE 290 aen FRONT ORB 6 169 ence E 1 Loosen by turning 2 Insert the cord 3 Tighten by turning Extension jacks for future use counterclockwise clockwise Either tightly twist or terminate the core wires NOTE e The settings must be changed to use this speaker for ZONE2 See page 25 SS gt SS gt 0 L R D 3 SURROUND BAC
89. etup Power Amp Assign 1 2 Zone2 Vol Level 3 Trigger Out 1 Setup 4 Trigger Out 2 Setup 5 Muting Level 6 GI E 3 Remote control unit On Screen Display Setup Lock xit Display the Setup Lock screen Remote control unit Select ONT to lock the system setup settings 3 Co y p g 5 7 Setup Lock CH Remote control unit Press the ENTER button to finalize the setting and exit the Option setup mode When the setup lock function is activated the settings listed below cannot be changed and SETUP LOCKED is displayed when related buttons are operated e System setup settings e Surround parameter settings e Tone control settings e Channel level settings including test tones To unlock press the System Setup button again and display the Setup Lock screen then select OFF and press ENTER Remote control unit x System setup is complete Once these settings are made there is no need to change them unless different AV components are connected or the speakers are repositioned 28 After completing system setup This button can be pressed at any time during the system setup process to complete the process 1 SYSTEM Press the SYSTEM SETUP button at the System Setup Menu S x The changed settings are entered and the on screen display turns off SETUP Remote control unit e On screen display signals Signals inpu
90. f so select Skips 1 1 Auto Setup ERROR Speaker None Retry4 Cancel4 dFront gt L R Phase Retry4 Cancel4d Skip4 ENGLISH Check of the measurement results 1 2 Setting the Manual EQ Setup Adjust the tone of the various speakers except subwoofer while listening to the sound music 1 Select the items 1 1 Auto Setup The measurement results of each item can be checked E here Speaker Config Check lt gt Select Manual EQ Setup at the Auto Setup Room 1 Auto Setup Room EQ Channel Level Check Q EO Menu 3 Store4 ON Auto Setup Manual EQ Setup Retry 4 Room EQ Setup Cancel4 Direct Mode Setup 5 Mic Input Select EQ Parameter Check Delay Time Check 1 Remote control unit Press the ENTER button and display the verification Remote control unit Exit screen Display the Manual EQ Setup screen 1 2 Manual EQ Setup Remote control unit ae Went y 63Hz 0 048 NOTE 125Hz 0 oo e When measurements have been made using the measurement microphone aah 4 oe speakers with a built in filter such as subwoofers might be set
91. filter off if your subwoofer switches to the front speakers A once can adjust the output volume and the measurements are completed crossover frequency 2 Subwoofer speaker is measured twice 3 When ZONE2 is selected this is not displayed After each channel is measured Calculating appears The display switches to Auto Setup check screen automatically 1 1 Auto Setup Step 1 9 1 1 Auto Setup Calculating 1 1 Auto Setup Speaker Config Check Delay Time Check Channel Level Check Step 9 9 Stored Retry 4 Cancel4 Cancel lt About automatic retry Remeasurement starts automatically to receive proper result of measurement Remeasurement is performed to 2 times and Retry1 or Retry2 is displayed on screen during remeasurement 1 1 Auto Setup Retryl Measuring Step 1 9 Cancel lt 14 About the error message These error screens will be displayed when performing the measurements of Auto Setup Room EQ and the automatic measurements can not be completed because of the speaker arrangement measurement environment or other factors Please check the following matters reset the pertinent items and measure again When there is too much noise in the room the speakers may not be detected properly Should this happen perform the measurements when the noise level is low or switch off the power of the equipment that is producing the noise for the duratio
92. ft front right and center surround left and surround right as well as the stereo 2 channel mode The signals for the different channels are fully independent eliminating the risk of deterioration of sound quality due to interference between signals crosstalk etc DTS features a relatively higher bit rate as compared to Dolby Digital 1234 kbps for CDs and LDs 1536 kbps for DVDs so it operates with a relatively low compression rate Because of this the amount of data is great and when DTS playback is used in movie theaters a separate CD ROM synchronized with the film is played With LDs and DVDs there is of course no need for an extra disc the pictures and sound can be recorded simultaneously on the same disc so the discs can be handled in the same way as discs with other formats There are also music CDs recorded in DTS These CDs include 5 1 channel surround signals compared to two channels on current CDs They do not include picture data but they offer surround playback on CD players that are equipped with digital outputs PCM type digital output required DTS surround track playback offers the same intricate grand sound as in a movie theater right in your own listening room HM DTS compatible media and playback methods Marks indicating DTS compatibility dts and KA l SURROUND The following are general examples Also refer to the player s operating instructions Media Dolby Digital output jacks Optical or coaxial digital ou
93. g on whether you are performing the operation from the main unit or the remote control unit Select the various parameters SURROUND PARAMETER Main unit Remote control unit Adjust the parameter settings SELECT CH Gen Main unit Remote control unit When the surround parameters are set using the buttons on the main unit stop operating buttons after completing the settings The settings are automatically finalized and the normal display reappears after several seconds When the settings are made using the buttons on the remote control unit press the ENTER or SURROUND PARAMETER button to finish E Dialogue Normalization The dialogue normalization function is activated automatically when playing Dolby Digital program sources Dialogue normalization is a basic function of Dolby Digital which automatically normalizes the dialog level standard level of the signals which are recorded at different levels for different program sources such as DVD DTV and other future formats that will use Dolby Digital These contents can be verified with the STATUS and ON SCREEN button Display The number indicates the normalization level when the currently playing program is normalized to the standard level NOTE e When Default is selected and the CURSOR left button is pressed CINEMA EQ and D COMBP are automatically turned off LFE is reset and the tone is set to the default
94. h three or more channels of surround have been recorded as two channels of signals using Dolby Surround encoding technology e N Q D No playback channels 5 1 ch l Ge Dolby Surround is used for the sound tracks of movies recorded on DVDs LDs and Video cassettes to Playback channels max L R C SL SR SW L R C S SW recommended be played on stereo VCRs as well as for the stereo broadcast signals of FM radio TV satellite broadcasts SET and cable TV Digital discrete processing Analog matrix processing Dolby Decoding these signals with Dolby Pro Logic II makes it possible to achieve multi channel surround playback The signals can also be played on ordinary stereo equipment in which case they provide High frequency playback limit of 20 kHz 7 kHz normal stereo sound surround channel Audio processing Dolby Digital encoding decoding Surround There are two types of DVD Dolby surround recording signals W Dolby Digital compatible media and playback methods 2 channel PCM stereo signals Marks indicating Dolby Digital compatibility Dies ee channel Dalby icitalrsidnals The following are general examples Also refer to the player s operating Instructions When either of these signals is input to the AVR 2805 the surround mode is automatically set to Dolby Pro Logic II when the DOLBY DTS SURROUND mode is selected Media Dolby Digital output jacks Playback method reference page E Mi Sources recorded in Dolby
95. heck the Power Amp Assign setting e When Surround Back is selected the test tone during Auto Setup will be output from the Surround Back speaker e When ZONE2 is selected change the setting to ZONE2 The test tone during Auto Setup is set so that it will not be output to ZONE2 Another room Select Surround Back or ZONE2 o Remote control unit Select the Power Amp Assign setting 1 1 Auto Setup ON Connect Microphone EPower Amp Assign 4 SurroundBack gt Starta Cancel4 Remote control unit NOTE e When ZONE2 is selected at System Setup Menu Power Amp Assign surround back speaker is not displayed as the target of setup in 2 1 Speaker Config The results is reflected in 5 1 Power Amp Assign 13 ENGLISH 4 lt a gt D Select the Start 1 1 Auto Setup NON KS Remote control unit i0 Remote control unit Power Amp Assign d SurroundBack gt Start lt Cancel 2 Press the CURSOR left button 5 Start the measurements Measurement of each channel is performed as follows NOTES Display e Measurement is canceled when MASTER VOLUME is operated while Tetris s Eer Es the Auto Setup is performed i e Set the volume to halfway and set the x1 Only the front speakers A is measured Even if the crossover frequency to the maximum front speakers B is set the setting automatically or low pass
96. igital the Dolby surround mode switches automatically When the input signal switches to a DTS signal the mode automatically switches to DTS surround 45 ENGLISH 2 Select 5 lt gt Select Tone Defeat OFF S e JAZZ CLUB EQ TONE ROOM SIZE medium gt EFFECT 10 gt oT Room EQ Tone Control NON WE ee T 1 Turn the SELECT knob to select the surround mode e Operating the surround mode and surround parameters from the main unit s panel SURROUND SELECT MODE Main unit Main unit 1 2 1 3 Remote control unit Ten klor Default Yes4 Tone Defeat gt e Treble e When turned clockwise E DIRECT gt STEREO DOLBY PRO LOGIC IIx DTS NEO 6 5 7CH STEREO gt WIDE SCREEN gt SUPER ed DER Display the Room EQ Tone Control screen VIRTUAL MATRIX VIDEO GAME MONO MOVIE CLASSIC CONCERT JAZZ CLUB ROCK ARENA Remote control unit e When turned counterclockwise Room EQ Tone Control DIRECT STEREO DOLBY PRO LOGIC IIx lt DTS NEO 6 5 7CH STEREO WIDE SCREEN SUPER f FRoom EQ 4 OFF gt 6 Select Bass or Treble Set the level VIRTUAL MATRIX VIDEO GAME MONO MOVIE CLASSIC CONCERT JAZZ CLUB ROCK ARENA e Taa Derea ae x To sele
97. iling and hard walls This mode JAZZ CLUB SC gives jazz a very vivid realism CLASSIC a CONCERT Select this for the sound of a concert hall rich in reverberations NOTE 1 VIDEO GAME Use this to enjoy video game sources Select this to emphasize the sense of expansion for music sources recorded in stereo Signals MATRIX consisting of the difference component of the input signals the component that provides the sense of expansion processed for delay are output from the surround channel VIRTUAL Select this mode to enjoy a virtual sound field produced from the front 2 channel speakers The front left channel signals are output to the surround and surround back signal left channels 5CH 7CH STEREO the front right channel signals are output to the surround and surround back signal right channels and the in phase component of the left and right channels is output to the center channel Use this mode to enjoy stereo sound D EE Select this when watching monaural movies for a greater sense of expansion Depending on the program source being played the effect may not be very noticeable In this case try other surround modes without worrying about their names to create a sound field suited to your tastes NOTE 1 When playing sources recorded in monaural the sound will be one sided if signals are only input to one channel left or right so input signals to both channels If you have a source component with only one audio
98. ipment only happens turn on the power of the this unit Do not use them for hair driers etc Connecting the audio components e When making connections also refer to the operating instructions of the other components Connecting a CD player Connecting the AC OUTLET OUTPUT CD player AC OUTLET Connect the CD player s analog e SWITCHED output jacks ANALOG OUTPUT to this unit s CD jacks using pin plug cords Ke total capacity 100 W The power to these outlets is turned on and off in conjunction with the POWER operation switch on the main unit and when the power is switched between on and standby from the remote control unit No power is supplied from these outlets when this unit s power is at standby Never connect equipment whose total capacity is above 100 W NOTE Only use the AC OUTLET for audio equipment Never use them for hair driers TVs or other electrical appliances 00 00 oo ECH Deo bk Jo o Turntable Connecting a turntable MM cartridge Connect the turntable s output cord to the AVR 2805 s PHONO jacks the L left plug to the L jack the R right plug to the right jack NOTE This unit cannot be used with MC cartridges directly Use a separate head amplifier or step up Connecting the pre out jacks transformer Use these jacks if you wish to connect external power amplifier s to increase the power of the front center and
99. is to be set e The CD CDR MD TAPE DVD VDP and VCR mode buttons and LEARNED TX indicator will flash CABLE D 4 Press the mode button of the equipment that is to be punched through e The mode button that was set will light O gt IANUAKU UA MS LATION PURE DIRECT DIRECT STEREO WV Sees ig p mn m mm mn errr SURROUND PARAMETER OFF ON SOURCE B ISS ZONE 2 ZONE 1 MAIN FF OFF ON DED CH STANDARD PURE DIRECT DIRECT STEREO STEREO o z Q FRONT SURROUND INPUT USE LEARN O DENON RC 975 Resetting 1 Resetting learned buttons 1 Press the USE LEARN button with the tip of a pen etc to set the learn mode e The mode selector buttons and LEARNED TX indicator flash Flashes 2 Press the mode button of the equipment that is to be reset e Mode button and LEARNED TX indicator flash CABLE V DP MD a 3 Hold for 4 seconds or longer the mode button of the equipment that is to be reset and the ON SOURCE button e The mode button and the LEARNED TX indicator will again flash and the learned remote control signal of the selected equipment will be deleted ON SOURCE CABLE VDP N 4 Press the USE LEARN button ON SOURCE LEARNED TX Of OD lt S K lt e E Di OO Ei Ed Si S bk Ed Ki STANDARD EN PURE DIRECT DIRECT STEREO CO MODE SELECT LIGHT MI Ol Ol SIMULATION S
100. ise The bass or treble sound can be increased to up to 6 dB Tone Control in steps of 1 dB Tone Defeat e To decrease the bass or treble dees Turn the control clockwise The bass or treble sound can be decreased up to 6 dB in d steps of 1 dB SELECT Main unit E Surround modes and parameters Signals and adjustability in the different modes h Channel output When When When When playing playing playing playing Pony DTS PCM ANALOG Digital FRONT i i l signals signals signals signals SURROUND SURROUND CENTER BACK L R Mode DIRECT PURE DIRECT STEREO EXTERNAL INPUT DOLBY PRO LOGIC H DOLBY PRO LOGIC II x DTS NEO 6 DOLBY DIGITAL SURROUND DTS SURROUND WIDE SCREEN SUPER STADIUM ROCK ARENA JAZZ CLUB CLASSIC CONCERT VIDEO GAME JHE g O 3 8 2 2 Ka We lt 4 CG u lt m m O JJ x VIRTUAL O Signal Adjustable O Able x No signal x Unable Turned on or off by speaker configuration setting Only for 2 ch contents ROOM SIZE ROOM EQ Normal Manual DTS SURROUND 5 7CH STEREO WIDE SCREEN SUPER STADIUM ROCK ARENA JAZZ CLUB CLASSIC CONCERT MONO MOVIE VIDEO GAME MATRIX VIRTUAL Surround parameters This sets the size of the sound field There are five settings small med s medium small medium med medium large and large small recreates a small sound field
101. ker Config 2 1 Speaker Config t amp FrontSp Surround EA gt Smal Sp enter Sp Large 4 EMD Large En Sp Back ubwoofer EA No f AE Denk Remote control unit 2 Select the parameter Center Sp Q Front Sp lt gt Subwoofer Remote control unit Surround Sp Surround back Sp ENTER the setting The Speaker Setup Menu reappears Remote control unit NOTE e Select Large or Small not according to the actual size of the speaker but according to the speaker s capacity for playing low frequency bass sound below the frequency set for the Crossover Frequency signals If you do not know try comparing the sound at both settings setting the volume to a level low enough so as not to damage the speakers to determine the proper setting e Parameters Large Select this when using speakers that have sufficient performance for reproducing bass sound below the frequency set for the Crossover Frequency mode lle lisesi coerce ss Select this when using speakers that do not have sufficient performance for reproducing bass sound below the frequency set for the Crossover Frequency mode When this is set bass sound with a frequency below the frequency set for the
102. l exceeds the allowable input for the front speakers Enter the setting The Advanced Playback Menu reappears Remote control unit 4 3 Setting the Auto Surround Mode ENGLISH Setting the Option Setup The surround mode used at last for the three types of input signals shown below is stored in the memory and the signal is automatically played with that surround mode the next time it is input 1 Note that the surround mode setting is also stored separately for the different input sources Analog and PCM 2 channel signals STEREO 2 2 channel signals of Dolby Digital DTS or other multi channel format DOLBY PL IIx cinema 3 Multi channel signals of Dolby Digital DTS or other multi channel format DOLBY DTS SURROUND x Default settings are indicated in x During playback in the PURE DIRECT mode the surround mode does not change even if the input signal is changed 3 Select Auto Surround Mode Playback Menu at the Advanced 4 Advanced Playback 1 lt gt e Remote control unit 1 Audio Delay 2 Dolby Digital Setup 3 Auto Surround Mode Press the ENTER button Display the Auto Surround Mode screen Remote control unit 1 Non Remote control unit Select ON if you want to use the auto surround mode OFF if you do not want to use it 4 3 Auto Surround Mode 3 KS Remote control unit Enter the setting The Advanced Playba
103. l mode only with digital input and DTS Surround mode only with digital input oaooeoeeeo eeeipg 2 oe 1 3 4 5 2 6 Ki LI U U U a DN U U LI U a Si A e S OLO S lt gt E x QQ eee eee eee G ei S a 2 S S z 5 E LG Ob STANDARD ENEN EN S H PURE DIRECT DIRECT STEREO Q Q VCR CHANNEL t ON SCREEN DISPLAY Cay Gan TEST TONE SPEAKER INPUT USE LEARN O DENON RC 975 SURROUND PARAMETER FRONT SURROUND 7 e 3 D Play a program source with the Das PPA mark mema Light The Dolby Digital indicator lights when playing Dolby Digital sources ga ht e The DTS indicator lights when playing DTS sources Light Press the SURROUND BACK button E Lights when the Surround Back CH is on SC EJ E Light Display the surround parameter menu SURROUND SURROUND PARAMETER PARAMETER ME Ee r d Main unit Remote control unit Dolby Digital EX SURROUND Main unit Remote control unit DTSESMTRXE6 1 F ICINEMA EQ4 OFF F ICINEMA EQ4 OFF D COMP lt OFFI gt LFE 4 O a gt LFE 4 O dB gt EQ TONE4 EQ TONE lt AFDM dor SB CH OUT AFDM lt OFF gt SB CH OUT NOTE The display on the screen differs dependin
104. l output capabilities for CD LD players a player with digital outputs for conventional DTS CDs LDs and a disc recorded in DTS 96 24 are required x 2 The resolution is 24 or 20 bits depending on the decoder 0 dB Set the frequency Hz below which the bass so of Crossover l the various speaker is to be output from the 80Hz Frequency subwoofer W Pure Direct Mode AL24 Processing The AVR 2805 is equipped with a pure direct mode allowing the effects of the video and digital circuitry to be shut down when playing CDs or records to achieve the ideal environment for analog playback resulting in extremely high quality music playback It is also equipped with AL24 processing which compensates the input digital data to produce the near analog waveforms which would be in a nature with 24 bits quality AL24 processing operates when PCM data such as CD is inputted Subwoofer This selects the subwoofer speaker for playing Mode deep bass signals LFE 2 This adjusts the volume of the signals output from Front L Front R Center Surround Surround Surround Surround 3 Channel h k fer f h iff L R evel the speakers and subwoo er for the different channels in order to obtain optimum effects 0 dB 0 dB 0 dB 0 dB 0 dB AL24 Processing p 4 St ENGLISH 5 Option Setup Option Setup 3 Input Setup Input Setup Default settings Default settings Input cp pvp vop tv ops v aux ve
105. l unit Set the distance between the center speaker and listening position Net DN a The distance changes in units of 0 03 meters 0 1 foot each time the button is 4 5 Channel Level pressed Select the value closest to the measured distance Crossover Frequency Remote control unit 1 Select Delay Time at the Speaker Setup Menu 2 Speaker Setup 6 Subwoofer Mode Setup 2 2 Delay Time 2 2 Delay Time Remote control unit Step 4 0 t Default Exit Display the Delay Time screen 2 2 Delay Time Subwoofer Set The Distance To Each Speakers D Do You Prefer Example When the distance is In Meters In Feet set to 3 6 m for the Meters 4 Feet center speaker Remote control unit x If Yes is selected for Default the settings are automatically reset Step lt 4 0 Im gt 3 Select the desired unit meters or feet 2 2 Delay Time to the default values Defaule ech Set The Distance To FL 4 50m Each Speakers Please note that the difference of distance for every speaker should be 6 0 ai f S SCH 8 z M enter m Do You Prefer m 20 ft or less If you set an invalid distance a CAUTION notice such as Subwoofer 4 9 60m In Meters In Feet ae E screen right
106. large a large sound field EFFECT LEVEL This sets the strength of the surround effect The level can be set in 15 steps from 1 to 15 Lower the level if the sound seems distorted DELAY TIME The delay time can be set within the range of 0 to 300 ms only in matrix mode TONE CONTROL This can be set individually for each surround mode except Pure Direct and Direct This sets the frequency response of each speaker gs E The Equalizer is not used aI Se ener ee Adjusts the frequency response of all speakers suitable for general surround When playing Dolby Digital and ENGLISH system Adjusts the characteristics of each speaker to the characteristics of the front speakers Adjusts the frequency response of all speakers flat This is suitable for music reproduction like ITU R speaker setting Selects the setting value that was set in the Manual EQ setup Signals and adjustability in the different modes Parameter default values are shown in parentheses DTS signals TONE O OFF O OFF x O OFF O OFF O OFF O OFF OFF O OFF O OFF O OFF O OFF O OFF OFF O OFF O OFF O OFF O OFF O O O Able x Unable CONTROL LFE OdB OdB O t OFF O OFF O 0dB O OFF O OdB O OFF O 0dB O OFF O OdB O OFF O 0dB O OFF O OdB O OFF O OdB O OFF O OdB O OFF O Note O OFF O Note O OFF O 0dB O OFF O OdB
107. le This effectively prevents the surround back channel signals from reflecting off the monitor or screen at the front center resulting in interference and making the sense of movement from the front to the back less sharp 60 to 90 centimeters 2 to 3 feet above ear level at the prime listening position Surround speakers As seen from above As seen from the side Surround back speakers 2 Setting for primarily watching movies using diffusion type speakers for the surround speakers For the greatest sense of surround sound envelopment diffuse radiation speakers such as bipolar types or dipolar types provide a wider dispersion than is possible to obtain from a direct radiating speaker monopolar Place these speakers at either side of the prime listening position mounted above ear level Path of the surround sound from the speakers to the listening position e Set the front speakers center speaker and subwoofer in the same positions as Suround speaker in example 1 Front speaker e t is best to place the surround speakers directly at the side or slightly to the front of the viewing position and 60 to 90 cm above the ears e Same as surround back speaker installation method 1 Using dipolar speakers for the surround back speakers as well is more Surround back speaker Point slightly downwards As seen from the side effective Surround back speakers e The signals from the surround channels reflect
108. lect the Crossover Frequency at the Speaker Setup Menu 2 Speaker Setup 1 Speaker Config 2 Delay Time 3 Channel Level F4 Crossover Frequency 5 Subwoofer Mode Setup Exit Display the Crossover Frequency screen Remote control unit Select the frequency 2 4 Crossover Frequency EH gt Remote control unit e 40 60 80 100 120 150 200 250 Hz can be selected Enter the setting The Speaker Setup Menu reappears Remote control unit 2 5 Setting the low frequency distribution This screen is not displayed when not using a subwoofer and all speakers are set to small size e Set the subwoofer mode according to the speaker system being used 1 Select the Subwoofer Mode Setup at the Speaker Setup Menu 2 Speaker Setup 1 Speaker Config 2 Delay Time 3 Channel Level 4 5 3 Remote control unit Crossover Frequency g5 Subwoofer Mode Setup Exit Display the Subwoofer Mode screen Remote control unit ENGLISH Select the setting 2 5 Subwoofer Mode Waa lt gt LFE Main Remote control unit Enter the setting The Speaker Setup Menu reappears Remote control unit NOTES Assignment of low frequency signal range 2 1 e The only signals produced from the subwoofer channel are LFE signals during playback of Dolby Digital or DTS signals and the low frequency signal range of channels set to
109. ll of the sounds in the soundtrack but with reduced dynamic range This only works when playing program sources recorded in Dolby Digital or DTS Select one of the four parameters OFF LOW MID middle or HI high Set to OFF for normal listening recorded in Dolby Surround SIGNAL DTS LFE Low Frequency Effect OFFSET Displays the dialog normalization offset value Te This sets the level of the LFE Low Frequency Effect sounds included in the source when playing program FLAG Displays the special identification signal recorded in the FLAG DISCRETE sources recorded in Dolby Digital or DTS input signal H the sound produced from the subwoofer sounds distorted due to the LFE signals when playing Dolby Digital MATRIX is displayed when matrix processing is or DTS sources when the peak limiter is turned off with the subwoofer peak limit level setting system setup conducted on the surround back channel DISCRETE is menu adjust the level as necessary displayed when discrete processing is conducted Program source and adjustment range Not displayed when no identification signal is recorded 1 Dolby Digital 10 dB to 0 dB 2 DTS Surround 10 dB to 0 dB X When DTS encoded movie software is played it is recommended that the LFE LEVEL be set to 0 dB for correct DTS playback Xx When DTS encoded music software is played it is recommended that the LFE LEVEL be set to 10 dB for correct DTS playback
110. ls see page 28 The AVR 2805 s on screen display function is designed for use with high resolution monitor TVs so it may be difficult to read small characters on TVs with small screens or low resolutions e The setup menu is not displayed when headphone are being used 12 Before setting up the system ENGLISH Setting the Auto Setup Room EQ 1 Check that all the connections are correct then turn on the main unit s power Setup will not be possible when the unit is set to Pure Direct ON or when the headphones are plugged in Therefore please cancel the mode or reverse the condition d SYSTEM SETUP SETUP Display the System Setup Menu GI Auto Setup Room EQ 2 Speaker Setup 3 Input Setup 4 Advanced Playback 5 Option Setup Remote control unit Exit NOTES e The System Setup menu composition is of a layered design that includes the related items below the large table title as contained in the tables of Pages 11 and 12 e Wherever your position in System Setup one more press of the System Setup button permits a move to one level higher Auto setup Room EQ The Auto Setup function of this unit performs an analysis of the speaker system and measures the acoustic characteristics of your room to permit an appropriate automatic setting x When performing Auto Setup a microphone is required for the setup E Measurement and setting details CO Speaker Config This sets the speaker connection mode
111. mponent equipped with digital input output jacks a 2505 NOTE INPUT OUTPUT OPTICAL L ioo e ooo O If humming noise is generated by a u PE r R R INPUT O tape deck etc move the tape deck CD recorder or Tape deck away Connecting the DIGITAL jacks Use these for connections to audio equipment with digital output Refer Connecting a tape deck to Setting the Digital in Assignment See page 22 Connections for recording Connect the tape deck s recording input jacks LINE IN or REC to this unit s NOTES tape recording CDR TAPE OUT jacks using pin plug cords e Use 75 Q ohms cable pin cords for coaxial connections Connections for playback e Use optical cables for optical connections removing the cap before Connect the tape decks playback output jacks LINE OUT or PB to this connecting unit s tape playback CDR TAPE IN jacks using pin plug cords ENGLISH Connecting the video components e To connect the video signal connect using a 75 Q ohms video signal cable cord Using an improper cable can result in a drop in video quality e When making connections also refer to the operating instructions of the other components e The AVR 2805 is equipped with a function for up converting video signals e The signal connected to the video signal terminal is output to the S Video and component video monitor
112. n of the measurements This screen will be displayed when the speakers 3 This screen will be displayed when accurate required for producing suitable reproduction have not been detected e The front L and front R speakers were not properly detected e Only one channel of the surround speakers was measurements cannot be made due to the input level to the microphone being too high Set up the speakers so that their position is farther away from the listening position Lower the volume of the subwoofer detected e Sound was output from the R channel when only one surround back speaker was connected e The surround back was detected but the surround speaker was not detected 1 1 Auto Setup ERROR Mic Input Overload Check that the pertinent speakers are properly Exit connected see page 9 This screen will be displayed when the measurement microphone is not connected or when all of the speakers have not been detected Connect the measurement microphone to the microphone connector Check the speaker connections 1 1 Auto Setup ERROR dFront gt L R None Retry4 Cancel4 1 1 Auto Setup ERROR DG Microphone None 2 This screen will be displayed when the speaker ke polarity is connected in reverse Check the polarity of the pertinent speakers For some speakers the screen below may be displayed even though the speakers are properly connected I
113. nal and the S video using the component video monitor output terminal connect 2 the player using the S Video or composite video input terminal TTT BLLLLLLLLLLLLLLLLLKLLLLLLLLLLKLELU signal which were inputted are converted mutually And also the Video signal and the S Video signal which were inputted are converted into a higher quality Cautions on the video conversion function og bert When the component video terminals are used to connect the This unit s input jacks e Tow or the This unit s output jacks Put eunte Erral put AVR 2805 n a TV or monitor projector etc and the video ee Se signals e yellow or S video terminals are used to connect the AVR 2805 SE AR with a VTR depending on the combination of the TV and VTR the picture may flicker in the horizontal direction be distorted be out of sync or not display at all when playing video tapes S Video jack S Video jack If this happens connect a commercially available video stabilizer etc with a TBC time base corrector function between the AVR 2805 and the VTR or if your VTR has a TBC Video jack Video jack function turn it on Connect the components audio inputs and outputs as described See page 5 Connecting the antenna terminals DIRECTION OF AM LOOP ANTENNA AM loop antenna assembly BROADCASTING Supplied Xx STATION Connect to the AM antenna terminals FM ANTENNA
114. nd since the quality of the pictures must be restricted it is common to only include still pictures In addition 96 kHz 24 bit 5 1 channel surround is possible with DVD audio sources but DVD audio players are required to play them with this high quality Set this to switch the surround back channel s power amplifier SURROUND BACK for use for zone2 Power Amp Auto Setup Assignment This parameter is for optimizing the Room EQ with which the audio signals are produced from the All Channel and Frequency 0 dB speakers Manual EQ Setup DTS 96 24 is a multi channel digital signal format developed by Digital Theater Systems Inc in order to deal with 3 this situation Room EQ Set the Room EQ setting with All or Assign for All Setup each surround mode Conventional surround formats used sampling frequencies of 48 or 44 1 kHz so 20 kHz was about the maximum playback signal frequency With DTS 96 24 the sampling frequency is increased to 96 or 88 2 kHz to achieve a wide frequency range of over 40 kHz Direct Mode Set the ON OFF setting of Room EQ in the case of OFF In addition DTS 96 24 has a resolution of 24 bits resulting in the same frequency band and dynamic range as 96 perp EREECHEN kHz 24 bit PCM As with conventional DTS Surround DTS 96 24 is compatible with a maximum of 5 1 channels so sources ete ee a SCH Mic recorded using DTS 96 24 can be played in high sampling frequency multiple channel audio with such normal media
115. nit 1 Auto Setup Room EQ Auto Setup Manual EQ Setup Room EQ Setup Direct Mode Setup Mic Input Select EQ Parameter Check Exit 1 4 Direct Mode Setup DIRECT PURE DIRECT Room EQ ON lt gt Gif Enter the setting The Auto Setup Room EQ Menu reappears 1 5 Setting the MIC Input Select e Use this setting when using a microphone other than the included one for measurements when performing the auto setup procedure e The microphone included with the AVR 2805 is a measurement microphone designed specifically for use during the auto setup procedure Select Mic and connect the included microphone to the SETUP MIC mini jack When conducting the auto setup procedure using a separate high performance condenser microphone for measurements select V AUX L and connect the microphone to the V AUX Lch pin jack x Please ask the DENON Authorized Service Center about the usable microphone other than the included one 1 lt gt amp Si Remote control unit Remote control unit Remote control unit Select Mic Input Select at the Auto Setup Room EQ Menu Display the Mic Input Select screen Enter the setting The Auto Setup Room EQ Menu reappears Remote control unit 1 Auto Setup Room EQ Auto Setup Manual EQ Setup Room EQ Setup Direct Mode Setup Mic Input Select EQ Parameter Check Exit Select
116. o alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE e DECLARATION OF CONFORMITY We declare under our sole responsibility that this product to which this declaration relates is in conformity with the following standards EN60065 EN55013 EN55020 EN61000 3 2 and EN61000 3 3 Following the provisions of 73 23 EEC 89 336 EEC and 93 68 EEC Directive UBEREINSTIMMUNGSERKLARUNG Wir erkl ren unter unserer Verantwortung daR dieses Produkt auf das sich diese Erklarung bezieht den folgenden Standards entspricht EN60065 EN55013 EN55020 EN61000 3 2 und EN61000 3 3 Entspricht den Verordnungen der Direktive 73 23 EEC 89 336 EEC und 93 68 EEC DECLARATION DE CONFORMITE Nous d clarons sous notre seule responsabilit que l appareil auquel se r f re cette d claration est conforme aux standards suivants EN60065 EN55013 EN55020 EN61000 3 2 et EN61000 3 3 D apr s les dispositions de la Directive 73 23 EEC 89 336 EEC et 93 68 EEC DICHIARAZIONE DI CONFORMITA Dichiarlamo con piena responsabilit che questo prodotto al quale la nostra dichiarazione si riferisce conforme alle seguenti normative EN60065 EN55013 EN55020 EN61000 3 2 e EN61000 3 3 In conformit con le condizioni delle direttive 73 23 EEC 89 3
117. of the actual volume of the low frequency range e Selection of the LFE play mode will play the low frequency signal range of the channel selected with LARGE from that channel only Therefore the low frequency signal range that are played from the subwoofer channel are only the low frequency signal range of LFE only during Dolby Digital or DTS signal playback and the channel specified as SMALL in the setup menu e Select the play mode that provides bass reproduction with quantity e When the subwoofer is set to Yes bass sound is output from the subwoofer regardless of the is set subwoofer mode setting in surround modes other than Dolby DTS e In surround modes other than Dolby Digital and DTS if the subwoofer is set to YES portion is always output to the subwoofer channel See page 39 the low frequency For details refer to Surround Modes and Parameters 21 ENGLISH H Setting the Input Setup System Setup Menu At the System Setup Menu select Input Setup eS 3 Remote control unit e Remote control unit Auto Setup Room EQ 1 Speaker Setup Input Setup Advanced Playback Option Setup Exit Display the Input Setup Menu screen Remote control unit Remote control unit 3 1 Setting the Digital In Assignment e This setting assigns the digital input jacks of the AVR 2805 for the different input sources
118. off the walls as shown on the As seen from above diagram at the left creating an enveloping and realistic surround sound presentation 54 ENGLISH 2 Dolby Pro Logic IIx e Dolby Pro Logic IIx furthers the matrix decoding technology of Dolby Pro Logic II to decode audio signals recorded on two channels into up to 7 1 playback channels including the surround back channel Dolby Pro Logic IIx also allows 5 1 channel sources to be played in up to 7 1 channels The mode can be selected according to the source The Music mode is best suited for playing music the The AVR 2805 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater Dolby Surround Cinema mode for playing movies and the Game mode for playing games The Game mode can only be 1 Dolby Digital used with 2 channel audio sources Dolby Digital is the multi channel digital signal format developed by Dolby Laboratories 3 Dolby Pro Logic II Dolby Digital consists of up to 5 1 channels front left front right center surround left surround right e Dolby Pro Logic II is a new multi channel playback format developed by Dolby Laboratories using and an additional channel exclusively reserved for additional deep bass sound effects the Low Frequency feedback logic steering technology and offering improvements over conventional Dolby Pro Logic circuits Effects LFE
119. or the remote control unit ON SCREEN FL C gt FR SR SBR SBL O DISPLAY FRONT SURROUND INPUT USE LEARN O DENON RC 975 FADER SW je SL Le 1 4 Select the play mode 2 Not Press the CURSOR left button to reduce the volume of the front channels the CURSOR right button to O reduce the volume of the rear Remote control unit channels Fader FRONT4 gt PREAR NOTE e The PLIIx mode is set when the SB CH OUT surround parameter is set to ON and the PLIE mode is set when this parameter is set to OFF SELECT Ow Main unit Remote control unit Ob FL The fader function does not affect the SW channel 0 A on e When the SB CH OUT parameter is set to ON oe Set SP Back at the system set up to 1spkr or 2spkrs 0 0 FR OcB OB op Display The channel whose channel level is adjusted lowest can be faded to 12 dB using the fader E function This is only displayed when setting the fader control If the channel levels are adjusted separately after adjusting the fader the fader adjustment values are cleared so adjust the fader again Pro LogicIIx Cinema mode Pro LogicIIx Music mode Pro LogicIIx Game mode e When the SB CH OUT parameter is set to OFF
120. output monophonic camcorder etc obtain a Y adaptor cable to split the mono output to two outputs and connect to the L and R inputs Personal Memory Plus This set is equipped with a personal memorize function that automatically memorizes the surround modes and input modes selected for the input different sources When the input source is switched the modes set for that source last time it was used are automatically recalled Xx The surround parameters tone control settings and playback level balance for the different output channels are memorized for each surround mode ENGLISH DSP surround simulation e To operate the surround mode and surround parameters from the remote control unit 2 re WIDE SCREEN SUPER STADIUM gt ROCK ARENA ec JAZZ CLUB VIRTUAL MATRIX VIDEO GAME MONO MOVIE CLASSIC CONCERT Select the surround mode for each input channel DSP SIMULATION Remote control unit The surround mode switches in the following order each time the DSP SIMULATION button iS pressed Press the surround patameter button Display the surround parameter screen The screen for the selected surround mode appears ROCK ARENA SURROUND ROOM SIZE PARAMETER medium EFFECT 10 gt ME GU EQ TONE4 lt SB CH OUT EN 4 gt OFF Default Ye Sd Remote control unit
121. p p 75 Q ohms Ps CB signal 0 7 Vp p 75 Q ohms Pr CR signal 0 7 Vp p 75 Q ohms DC 100 MHz 0 3 dB FM note uV at 75 Q ohms 0 dBf 1 x 10 W AM 87 50 MHz 108 0 MHz 522 kHz 1611 kHz 1 0 uV 11 2 dBf 18 pV MONO 1 6 uV 15 3 dBf STEREO 23 uV 38 5 dBf MONO 77 dB STEREO 72 dB MONO 0 15 STEREO 0 3 AC 230 V 50 Hz 290 W 1 W Max Standby 434 W x 171 H x 429 D mm 13 5 kg R6P AA Type three batteries 58 W x 230 H x 37 D mm 230 g including batteries For purposes of improvement specifications and design are subject to change without notice 8 Q ohms 20 Hz 20 kHz with 0 05 T H D ENGLISH 61 DENON Ltd 16 11 YUSHIMA 3 CHOME BUNKYO KU TOKYO 113 0034 JAPAN Telephone 03 3837 5321 Printed in Japan 511 4212 006
122. peaker The test tones are emitted from each speaker in the following order at 4 second intervals the first time and second time around 2 second intervals the third time around and on Flashing FL C FR SR gt T SBR SBL LS SW When the surround back speaker setting is set to 1spkr for Speaker Configuration this is set to SB Use the CURSOR left and right buttons to adjust all the speakers to the same volume The volume can be adjusted between 12 dB and 12 dB in units of 0 5 dB b When the Manual mode is selected 2 3 Test Tone GFL 4 1 COO SOS Example When the volume is set to 11 5 dB while the test tone is being produced from the Front Lch speaker 3 Select the mode 2 3 Channel Level Select Auto or Manual Select the speaker 2 Adjust all the speakers to the same Test Tone Start H volume Level Clear Yes 4 lt gt Remote control unit UC f e Auto Adjust the level while listening to the test tones Example When the Auto ZEN produced automatically from each speaker mode is selected e Manual Remote control unit Remote control unit Select the speaker from which you want to produce the test tone to adjust the level 7 Enter the setting The Channel Level screen reappears Select Test Tone Start
123. polarity and bass reproduction ability 2 Delay Time This sets the optimum delay time from each speaker corresponding to the listening position 3 Channel Level This sets the volume that is output from each speaker D Room EQ This sets the frequency response of each speaker NOTE e A loud test tone is output during the measurement Please consider this should you be planning nighttime measurements and consider not allowing small children into the listening room at this time Connecting the microphone for Auto Setup 1 Connect the microphone for Auto Setup to the NOTE Setup Mic connector on the front panel of the unit e When using other microphone See page 16 2 Place the microphone for Auto Setup at the actual listening position which will be at the same height as your ears Use a tripod or level surface at positioning Select Auto Setup Room EQ at the System Setup Nets Menu T Remote control unit Gi Auto Setup Room EQ 2 Speaker Setup 3 Input Setup 4 Advanced Playback 5 Option Setup Exit Display the Auto Setup Room EQ menu Remote control unit 1 1 Setting the Auto Setup Select Auto Setup at the Auto Setup Room EQ 1 Auto Setup Room EQ d n 7 E Remote control unit GI Auto Setup 2 Manual EQ Setup 3 Room EQ Setup 4 Direct Mode Setup 5 Mic Input Select Exit Display the Auto Setup screen Remote control unit C
124. r Manual tuning operation to tune in the station to be preset in the memory MEMORY Press the MEMORY button V Remote control unit SHIFT Press the SHIFT button and E select the desired memory block A to G Remote control unit CHANNEL Press the CHANNEL UP or DOWN button to select the desired preset channel 1 to 8 Remote control unit MEMORY Press the MEMORY button Kal again to store the station in the preset memory Remote control unit To preset other channels repeat steps 2 to 5 A total of 56 broadcast stations can be preset 8 stations channels 1 to 8 in each of blocks A to G Checking the preset stations TAPE aaa Co CABLE VDP MODE MEMORY BAND SHIFT 2 5 Og TUNER TUNING TV VOL LA 4 DSP 5CH 7CH STEREO VCR CHANNEL SURROUND PARAMETER ON SCREEN DISPLAY CD oa 1 Dar Leon Back Cram oa 7 mone anatos Com IN USE LEARN O DENON RC 975 e The preset broadcast stations can be checked on the on screen display 1 Press the ON SCREEN button repeatedly until the Tuner Preset Stations screen appears on the OSD Tuner Preset Stations AlfM 87 50M ON SCREEN A2fM 89 10MHz A3M 98 TOM A4FN108 00M DISPL A5FM 90 10MH A6FM 90 10Mh ATFM 90 10Mbz Remote control unit A8 90 10MH FRONT SURROUND oa 1 strone SPEAKER BACK INPUT cau 2 mone ANALOG EXT IN USE
125. r ver2 oe Power AMP Set this to switch the surround back channel s Geh Digital In This assigns the digital input jacks for the Source Assignment power amplifier for use for zone2 Assignment different input sources Digital Inputs COAX2 OPT1 OFF O Zone vol This sets the output level the zone2 output jacks Ext In EA i This menu is not displayed when ZONE2 is Variable XT n A D selected at Option Setup Power Amp Assign E SE Ext In Subwoofer terminal playback Subwoofer 15 dB p p p g Level i ZONE MAIN VOP es vera verz vax Component This assigns the color difference component Trigger Out Set the Trigger Out output for the each input PHONO CD TUNER DVD VDP TV DBS VCR 1 VCR 2 V AUX In Assign video input jacks for the different input sources NONE NONE NONE NONE p Setup sources OFF OFF ON ON VON ON ON ON ON Video Input Mode Auto Tuner Presets Set the input signal to be output from the monitor output terminal FM stations are received automatically and stored in the memory 4 Advanced Playback 58 Audio Delay Dolby Digital Setup Auto Surround Mode Set the audio delay to delay time the sound and synchronize it with the picture Turn the audio compression on or off when down mixing Dolby Digital signals Set the Auto surround mode function 87 5 89 1 98 1 108 0 90 1 90 1 90 1 90 1 MHz 522 603 999 1404 1611 kH
126. r starting playback 1 Adjusting the sound quality TONE The tone control function will not work in the PURE DIRECT and the DIRECT mode 6060 000OU Ss m O O 2 z 5 2 E lt Ss 0 lt S OO C IL lt S EZ gt i x gt z 2 m m o D a E a gt k Ei ER 0G gG v Q Ss 2 O PUREDIRECT DIRECT STEREO 00000000 0000 3 1 2 The tone switches as follows each time the TONE CONTROL button is pressed TONE CONTROL Sa BASS TREBLE Main unit See With the name of the volume to be adjusted selected turn O the SELECT knob to adjust the level Main unit e To increase the bass or treble Turn the control clockwise The bass or treble sound can be increased to up to 6 dB in steps of 1 dB e To decrease the bass or treble Turn the control counterclockwise The bass or treble sound can be decreased to up to 6 dB in steps of 1 dB If you do not want the bass and treble to be adjusted turn on the tone defeat mode JON x The signals do not pass through the bass and treble adjustment circuits providing higher quality sound Main unit 2 Listening over headphone 1 pHones Plug the headphone plug into the jack X Connect the headphone t to the PHONES ja
127. r the signal source e DTS Neo 6 Cinema This mode is optimum for playing movies Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2 channel sources as with 6 1 channel sources This mode is effective for playing sources recorded in conventional surround formats as well because the in phase component is assigned mainly to the center channel C and the reversed phase component to the surround SL SR and SB channels e DTS Neo 6 Music This mode is suited mainly for playing music Changes in the sound quality are reduced by decoding with emphasis on the front channel signals FL and FR and a natural sense of expansion is given to the sound field by the effect of the surround signals output from the center C and surround SL SR and SB channels ENGLISH DTS 96 24 System setup items and default values set upon shipment from the factory The sampling frequency number of bits and number of channels used for recording of music etc In studios has been increasing in recent years and there are a growing number of high quality signal sources including 96 kHz 24 bit 5 1 channel sources Auto Setup Room EQ Default settings 1 Auto Setup Room EQ For example there are high picture sound quality DVD video sources with 96 kHz 24 bit stereo PCM audio tracks However because the data rate for these audio tracks is extremely high there are limits to recording them on two channels only a
128. rating instructions of the other components The input selectors for the S inputs and Video inputs work in conjunction with each other e The signals input to the color difference component video jacks are not outputs to the VIDEO output jack e The AVR 2805 is equipped with a function for converting video signals yellow or the S Video output jack e The signal connected to the S Video signal terminal is output to the composite video and component video e Some video sources with component video outputs are labeled Y Cs Cr or Y Pb Pr or Y R Y B Y These monitor out terminals terms all refer to component video color difference output e The REC OUT terminals have no conversion function so when recording only connect the S Video terminals e The function assigned to the component video input can be changed at the system setup For details see Setting the Video Input Mode See page 23 VIDEO OUT Connecting a monitor TV MONITOR OUT DVD player or video disc player VDP e Connect the TV s S video input S VIDEO INPUT to the COMPONENT DVD player Connecting a DVD player MONITOR OUT jack using a S jack connection cord DVD IN jacks e Connect the DVD player s color difference component video output jacks COMPONENT VIDEO OUTPUT to the COMPONENT VIDEO 1 IN jack using 75 Q ohms coaxial video pin plug cords e In the same way another video source with component video outputs such as a TV DBS t
129. right channels play an important role in achieving a smooth transition of the acoustic image from the front to the back As shown on the diagram above in a movie theater the surround signals are also produced from diagonally in front of the listeners creating an acoustic image as if the sound were floating in space To achieve these effects we recommend placing the speakers for the surround left and right channels slightly more towards the front than with conventional surround systems Doing so sometimes increases the surround effect when playing conventional 5 1 channel sources in the 6 1 surround or DTS ES Matrix 6 1 mode Check the surround effects of the various modes before selecting the surround mode 53 ENGLISH S 2 When not using surround back speakers Speaker setting examples p Here we describe a number of speaker settings for different purposes Use these examples as guides to set up Front speakers e Set the front speakers with their front surfaces your system according to the type of speakers used and the main usage purpose E as flush with the TV or monitor screen as SE 1 DTS ES compatible system using surround back speakers pees eae n EE i p y g H Monitor front left and right speakers and no further from Front speaker ST 1 Basic setting for primarily watching movies Subwoofer the listening position than the front speakers This is recommended when mainly playing movies and using regular single way or 2 way speakers for
130. rround SL SR and SB channels add a natural sense of expansion to the sound field CENTER IMAGE 0 0 to 1 0 default 0 3 The center image parameter for adjusting the expansion of the center channel in the DTS NEO 6 MUSIC mode has been added ENGLISH DTS NEO 6 mode e Surround playback can be performed for the analog input and PCM digital input 2 channel signals 1 m ES 3 5 1 4 6 1 Select the DTS NEO 6 mode ODE T SELECT STANDARD APO BD Main unit Main unit Remote control unit e The mode switches as shown below each time the button is pressed DOLBY PLIIx zs DTS NEO 6 2 Play a program source 3 SURROUND Set the surround parameter PARAMETER Qa mode DTS NEO 6 Aal KANN Main unit CINEMA E Q 4 OFF gt SURROUND a D COMP AO PARAMETER I jE ho EQ TONE lt Ch go SB CH OUT ae BA gt oer Remote control unit Default Yes Select the play mode 4 SELECT Gi Main unit DTS NEO 6 D CNTR IMAGE d 0 3 gt D COMP AE EQ TONE4 SB CH OUT aB N 4 gt OFF Default Yes4 Remote control unit Display The DTS NEO O 6 Cinema or Music mode can be chosen directly by pressing the CINEMA or MUSIC button on the remote control
131. s are being input properly If the indicator does not light check whether the digital input component setup page 22 and connections are 1 ENGLISH Playback using the external input EXT IN jacks Set the external input EXT IN mode Press the EXT IN to switch the external input E Py Remote control unit EXT IN Main unit Once this is selected the input signals connected to the FL front left FR front right C center SL surround left SR surround right SBL surround back left and SBR Surround back right channels of the EXT IN jacks are output directly to the front left and right center surround left and right and surround back left and right soeaker systems as well as the pre out jacks without passing through the surround circuitry In addition the signal input to the SW Subwoofer jack is output to the PRE OUT SUBWOOFER Jack 2 Cancelling the external inout mode To cancel the external input EXT IN setting press the input mode AUTO PCM DTS or ANALOG button to switch to the desired input mode See page 34 MODE ANALOG Main unit Remote control unit e When the input mode is set to the external input EXT IN the surround mode DIRECT STEREO 2 1 DISC SKIP onscreen AE Y DISPLAY Gama Gan CALL1 stone SPEAKER Back fac NOTES e In play modes other than the ex
132. s played Video conversion is not conducted so no image is output from the monitor output terminal when there is no input signal to the component terminal S Video The signal connected to the S Video terminal is always played The S Video input signal is converted and output from the composite and component monitor output terminal Video The signal connected to the composite video terminal is always played The composite video input signal is up converted and output from the S Video and component monitor output terminals NOTE Down converting from the component video signal to the S Video and composite video signal is not possible so when not using the component video monitor output terminal connect the player using the S Video or composite video input terminal Cautions on the video conversion function When the component video terminals are used to connect the AVR 2805 with a TV or monitor projector etc and the video yellow or S video terminals are used to connect the AVR 2805 with a VTR depending on the combination of the TV and VTR the picture may flicker in the horizontal direction be distorted be out of sync or not display at all when playing video tapes If this happens connect a commercially available video stabilizer etc with a TBC time base corrector function between the AVR 2805 and the VTR or if your VTR has a TBC function turn it on Enter the setting The Input Setup Menu reappears Remote control
133. settings are automatically reset to the default values 22 3 2 Setting the Ext In Subwoofer Level e Set the method of playback of the analog input signal connected to the Ext In Subwoofer Select Ext In Subwoofer Level Menu at the Input Setup 3 Input Setup 1 Digital In Assign g2 Ext In Subwoofer Level 3 Component In Assign 4 Video Input Mode 5 Auto Tuner Presets Exit Display to the Ext In Subwoofer Level screen 3 2 Ext In Subwoofer Level Subwoofer Level 4 15dB Select the desired setting Select according to the specifications of the player being used Also refer to the player s operating instructions 15 dB default recommended 0 5 10 or 15 can be selected Enter the setting The Input Setup Menu reappears ENGLISH 3 3 Setting the Component In Assign Select the input source for Select the mode as below which you want to set the Video Input Mode sources The details in each mode are as follows e This setting assigns the color difference component video input jacks of the AVR 2805 for the different input AUTO COMPONENT lt Svideo Video Select Component In Assign at the Input Setup Input Setup Menu Digital In Assign Ext In Subwoofer Level Component In Assign video Input Mode EE Auto Tuner Presets Remote control unit Display the Component In Assign screen 3 3 Component In Assign UPEA gt VDP NONE
134. sing the buttons on the b 4008 Ode remote control unit Remote control unit 0 dB 40 dB The output level is fixed at the set level and the volume can no longer be adjusted NOTE e When ZONE2 is selected at System Setup Menu 5 1 Power Amp Assign the Zone2 vol Level is all set to Variable including preout level and this menu 4 Select the input source Select ON or OFF is not displayed gt Boy Enter the setting The Option Setup Menu reappears Remote control unit Remote control unit 3 Select the Zone MAIN or Zone2 Remote control unit Remote control unit Enter the setting The Option Setup Menu reappears Remote control unit X Set the Trigger out 2 Setup in the same way 26 ENGLISH 5 5 Setting the Muting Level 5 6 Setting the On Screen Display OSD e This sets the amount of attenuation at audio output muting e Use this to turn the on screen display messages other than the menu screens on or off e Sets the on screen display s display mode Mode 1 Prevents flickering of the on screen display when there is no video signal Mode 2 Flickering is not prevented Power Amp Assign Use this mode if the on screen display does not appear in the mode 1 as may happen according Zone2 Vol Level Trigger Out 1 Setup to the TV being used Trigger Out 2 Setup 1 Select Muting Level at the Option Setup Menu 5 Option Setup 1 2 3 4
135. sound more faithful to the producer s sound design aims than with conventional 5 1 or 6 1 channel systems In addition the bit stream format is 100 compatible with conventional DTS signals so the effect of the Matrix 6 1 format can be achieved even with 5 1 channel signal sources Of course It is also possible to play DTS ES Matrix 6 1 encoded sources with a DTS 5 1 channel decoder When DTS ES Discrete 6 1 or Matrix 6 1 encoded sources are decoded with a DTS ES decoder the format is automatically detected upon decoding and the optimum playing mode is selected However some Matrix 6 1 sources may be detected as having a 5 1 channel format so the DTS ES Matrix 6 1 mode must be set manually to play these sources For instructions on selecting the surround mode see page 43 The DTS ES decoder includes another function the DTS Neo 6 surround mode for 6 1 channel playback of digital PCM and analog signal sources M DTS Neo 6 surround This mode applies conventional 2 channel signals to the high precision digital matrix decoder used for DTS ES Matrix 6 1 to achieve 6 1 channel surround playback High precision input signal detection and matrix processing enable full band reproduction frequency response of 20 Hz to 20 kHz or greater for all 6 1 channels and separation between the different channels is improved to the same level as that of a digital discrete system DTS Neo 6 surround includes two modes for selecting the optimum decoding fo
136. surround sound channels or for connection to powered loudspeakers If humming or other noise is generated when the ground wire is connected disconnect the ground E wire Wm mm mm D mmm mmm D mmm mm WD E X To use Surround back with one speaker connect the speaker to SURR BACK L CH Pe CB PR CR Fait Pat VIDEO 3 Pit Pat VIDEO S VIDEO V eg J 10 O10 F E FRONT SUB SURROUND SURRBAKN ZONE2 REMOTE CONTROL DVR kasss Al PRE OUT ver 1 N ROOM TO ROOM B D D ver 2 Ei H r i TRIGGER OUT 1 Ki o 0 DC 12V 25mA MAX a R TRIGGER OUT 2 DC 12V 25mA MAX 7 SURROUND CENTER L Don 4 m SURROUND CENTER AORB 6 16Q SPEAKER SYSTEMS SPEAKER IMPEDANCE SURR BACK ZONE 2 6 16Q FRONT e 8 169 CD player or other component Route the connection cords etc in equipped with digital output jacks such a way that they do not obstruct the ventilation holes Power supply cord TRIGGER OUT AC 230V 50Hz Turn the DC 12V voltage on and off for the individual functions For details see Setting the Trigger Out Setup See page 26 MD recorder CD recorder or other co
137. t speaker systems Trigger Out Set the Trigger Out output for the each input TUNER DBS VCR 1 V AUX Set these at the sides of the TV or setup SE screen with their front surfaces as flush on ON with the front of the screen as possible Trigger Out2 Set the Trigger Out2 output for the each input CD TUNER CDR DVD VDP Tv DBS VCR 1 VCR 2 V AUX Setup Sources TAPE OD minimum Surround speaker systems This sets the amount of attenuation at audio NEN NS output muting This sets whether or not to display the on screen display that appears on the monitor screen when the controls on the remote control unit or main unit On Screen Display ON Mode 1 are operated A setting to prevent flickering On Screen Display Set whether or not to lock the system setup penn Lock settings so that they cannot be changed Setup Lock OFF NOTES e The on screen display signals are output with priority to the S VIDEO MONITOR OUT jack during playback of a video component For example if the TV monitor is connected to both the AVR 2805 s S Video and video monitor output jacks and signals are input to the AVR 2805 from a video source VDP etc connected to both the S Video and video input jacks the on screen display signals are output with priority to the S Video monitor output If you wish to output the signals to the video monitor output jack do not connect a cord to the S VIDEO MONITOR OUT jack For detai
138. t speakers This adjustment can be performed with the system setup See page 20 or from the remote control unit as described below e Adjusting with the remote control unit using the test tones is only possible in the Auto mode and only effective in the STANDARD DOLBY DTS SURROUND modes The adjusted levels for the different modes are automatically stored in the memory Press the TEST TONE button Remote control unit Test tones are output from the different speakers Use the channel volume adjust buttons to adjust so that the 2 sou lt gt volume of the test tones is Remote control unit the same for all the speakers 3 ED After completing the X adjustment press the TEST TONE button again Remote control unit oi 0g STANDARD Berg PUREDIRECT DIRECT stereo WR JODE SELECT LIGHT Geis VR CHANNEL t SURROUND PARAMETER onscreen N DISPLAY RETURN 1 3 FRONT SURROUND Gm INPUT USE LEARN O DENON RC 975 e After adjusting using the test tones adjust the channel levels either according to the playback sources or to suit your tastes as described below Select the speaker level you want to adjust Remote control unit The channel switches as shown below each time the button is pressed gt FL cl C FR cl SR SBRT SBL FADER lt SW te SL j lt
139. t to the AVR 2805 On screen display signal output VIDEO signal S video signal Video signal output to Video signal output to Video signal output to Color input jack VIDEO MONITOR OUT S Video MONITOR Difference Component Video yellow WEE jack yellow OUT jack MONITOR OUT jack a ee eee ee ee ee o 2 O x O 3 x O O 4 Q O x O O O Signal X No signal O On screen signals output X On screen signals not output NOTE e When a component video signal is input and when the Video Input Mode is set to the component fixed mode at Input setup the on screen display is only displayed when the System Setup Surround Parameters and On Screen buttons are operated ENGLISH REMOTE CONTROL UNIT Operating DENON audio components e The included remote control unit RC 975 can be used to operate not only the AVR 2805 but other remote Use the mode selector buttons to select the component you want control compatible DENON components as well In addition the memory contains the control signals for 1 to operate Pe other remote control units so it can be used to operate non DENON remote control compatible products se Ted uncton will EE in the sequ nee deserbed wong below each time the MODE SELECT button is pressed 8 rem z Inserting the batteries ee rege i ZONE a TV DBS CABLE VCR OU Remove the remote control unit s rear cover Notes on Batteries e Use R6P AA batteries in the remote control unit e The batteries should be repl
140. ternal input mode the signals connected to these jacks cannot be played In addition signals cannot be output from channels not connected to the input jacks e The external input mode can be set for any input source To watch video while listening to sound select the input source to which the video signal is connected then set this mode e If the subwoofer output level seems to high set Input mode when playing DTS sources e Noise will be output if DTS compatible CDs or LDs are played in the ANALOG or PCM mode When playing DTS compatible sources be sure to STANDARD 5 7CH STEREO WIDE SCREEN or DSP the SW ATT surround parameter to ON SIMULATION cannot be set correct and whether the component s power is turned on Xx AL24 processing is activated when PCM signals connect the source component to the digital input jacks OPTICAL COAXIAL and set the input mode to DTS Note on playing a source encoded with DTS e Noise may be generated at the beginning of playback and while searching during DTS playback in the AUTO mode If so play in the DTS mode are played while the surround mode is set to PURE DIRECT DIRECT or STEREO NOTE e The indicator will light when playing CD ROMs containing data other than audio signals but no sound will be heard 35 ENGLISH Playing audio sources CDs and DVDs The AVR 2805 is equipped with three 2 channel playback modes exclusivel
141. th bipolar or dipolar properties are used SR Surround R channel SB Surround back channel E Surround L channel Multiple surround speakers For 6 1 channel system e Other types of audio These signals are designed to recreate a 360 sound field using three to five speakers In this case the speakers should surround the listener from all sides to create a uniform sound field from 360 Ideally the surround speakers should function as point sound sources in the same way as the front speakers These two types of sources thus have different properties and different speaker settings particularly for the surround speakers are required in order to achieve the ideal sound ENGLISH Surround back speakers A 6 1 channel system is a conventional 5 1 channel system to which the surround back SB channel has been added This makes it easy to achieve sound positioned directly behind the listener something that was previously difficult with sources designed for conventional multi surround speakers In addition the acoustic image extending between the sides and the rear is narrowed thus greatly improving the expression of the surround signals for sounds moving from the sides to the back and from the front to the point directly behind the listening position Change of positioning and acoustic image with 6 1 channel systems Change of positioning and acoustic image with 5 1 channel systems
142. tions broadcasting traffic program TP stations ON SOURCE LEARNED TX ZONE 2 ZONE 1 MAIN OFF ON CAVE Gm Ge e GD CABLE VDP MODE MEMORY BAND SHIFT SP 5CH 7CH STEREO SURROUND PARAMETER FRONT SURROUND INPUT USE LEARN O DENON RC 975 51 ENGLISH RT appears on the display when radio text data is received When the RDS button is pressed until RT appears on the display while receiving an RDS broadcast station the text data broadcast from the station is displayed To turn the display off use the left and right cursor buttons on the remote control unit If no text data is being broadcast NO TEXT DATA is displayed RDS New tuning system for your convenience 1 Push RDS ROS RDS station Program category Traffic info Ep Gzd io Text ANE CHBS FM105 50Mh This is the screen when operated LAST FUNCTION MEMORY RT Radio Text SURROUND PARAMETER A8 lt q ZE A8 gt ZE RDS DISPLAY RETURN FRONT SURROUND RO INPUT USE LEARN ON SCREEN O DENON RC 975 e This unit is equipped with a last function memory which stores the input and output setting conditions as they were immediately before the power is switched off This function eliminates the need to perform complicated resetting when the power is switched on e The unit is also equipped with a back up memory This fun
143. to 5 1 channels of wide range high fidelity surround sound from sources such as laser disc DVD and specially encoded music dISCS DTS ES Extended Surround and DTS Neo 6 The AVR 2805 can be decoded with DTS ES Extended Surround a multi channel format developed by Digital Theater Systems Inc The AVR 2805 can be also decoded with DTS Neo 6 a surround mode allowing 6 1 channels playback of regular stereo sources DTS 96 24 compatibility The AVR 2805 can be decoded with sources recorded in DTS 96 24 a multi channel digital signal format developed by Digital Theater Systems Inc DTS 96 24 sources can be played in the multi channel mode on the AVR 2805 with high sound quality of 96 kHz 24 bits or 88 2 kHz 24 bits 7 10 11 12 Pure Direct Mode AL24 Processing The AVR 2805 is equipped with a pure direct mode allowing the effects of the video and digital circuitry to be shut down when playing CDs or records to achieve the ideal environment for analog playback resulting in extremely high quality music playback It is also equipped with AL24 processing which compensates the input digital data to produce the near analog waveforms which would be in a nature with 24 bits quality AL24 processing operates when PCM data such as CD is inputted Auto Setup Room EQ Use of the microphone for setup applications measures the presence of speakers the distance to the speakers and other information and permits automatic setup
144. tput same as for PCM X2 Playback method reference page Set the input mode to AUTO or DTS page 34 Never set the mode to ANALOG or PCM X 1 Set the input mode to AUTO or DTS page 34 Never set the mode to ANALOG or PCM X1 Optical or coaxial digital output same as for PCM X2 Optical or coaxial digital output same as for PCM X3 Set the input mode to AUTO or DTS page 34 x 1 DTS signals are recorded in the same way on CDs and LDs as PCM signals Because of this the un decoded DTS signals are output as random hissy noise from the CD or LD player s analog outputs If this noise is played with the amplifier set at a very high volume it may possibly cause damage to the speakers To avoid this be sure to switch the input mode to AUTO or DTS before playing CDs or LDs recorded in DTS Also never switch the input mode to ANALOG or PCM during playback The same holds true when playing CDs or LDs on a DVD player or LD DVD compatible player For DVDs the DTS signals are recorded in a special way so this problem does not occur Xx 2 The signals provided at the digital outputs of a CD or LD player may undergo some sort of internal signal processing output level adjustment sampling frequency conversion etc In this case the DTS encoded signals may be processed erroneously in which case they cannot be decoded by the AVR 2805 or may only produc
145. tputs to the television for superior picture quality TRIGGER OUT AVR 2805 is equipped with 2 systems of 12V TRIGGER OUT connections Each output can be activated upon the selection of assigned Main Zone inputs or zone2 inputs RS 232C Terminal Includes a RS 232C port to support an AMX Crestron integrated control system AC INLET Detachable AC CORD is used Auto Surround Mode This function stores the surround mode last used for an input signal in the memory and automatically sets that surround mode the next time that signal is input Large sized fluorescent display A large sized fluorescent display is used which also permits a check of the input output channels Audio delay This is a function for delaying the audio signal with respect to the video signal 0 to 200 msec Preset Memory Tuning 56 Station AM FM Random Preset Memory tuning 5 CONNECTIONS e Do not plug in the AC cord until all connections e Note that binding pin plug cords together with AC have been completed cords or placing them near a power transformer e Be sure to connect the left and right channels will result in generating hum or other noise properly left with left right with right e Noise or humming may be generated if a e Insert the plugs securely Incomplete connections connected audio equipment is used independently will result in the generation of noise without turning the power of this unit on If this e Use the AC OUTLET for audio equ
146. ug cord i VCR 2 an EA E 8 H AG Note on connecting the digital input jacks e Only audio signals are inputs to the digital input jacks For details See page 5 3 TE TTT De i QB BBR RRR kb A H Video deck 2 Possess af a BERR RR RRR RRR REPRE EEE eS a AAAA LN Video deck 1 6 O A OL Connecting a video decks e There are two sets of video deck VCR jacks so two video decks can be connected for simultaneous recording or video copying Video input output connections e Connect the video decke video output jack VIDEO OUT to the yellow VCR 1 IN jack and the video decke video input jack VIDEO IN to the yellow VCR 1 OUT jack using 75 Q ohms video coaxial pin plug cords Connecting the audio output jacks e Connect the video decks audio output jacks AUDIO OUT to the VCR 1 IN jacks and the video decks audio input jacks AUDIO IN to the VCR 1 OUT jacks using pin plug cords X Connect the second video deck to the VCR 2 jacks in the same way ENGLISH Connecting the video components equipped with S Video jacks Connecting the video component equipped with Color Difference Component Y PR CRrR PB CB Video jacks e When making connections also refer to the operating instructions of the other components A note on the S input jacks e When making connections also refer to the ope
147. uner etc can be connected to the VIDEO 2 color difference component video jacks Connecting a DVD player or a video disc player VDP DVD e Connect the DVD player s S Video output jack to the S VIDEO DVD IN jack using a S Video connection cord e VDP can be connected to the VDP jacks in the same way e tis also possible to connect a video disc player DVD player video camcorder game machine etc to the V AUX jacks Monitor TV TV or satellite broadcast tuner Monitor TV COMPONENT VIDEO IN Cr Connecting a monitor TV MONITOR OUT jack e Connect the TV s color difference component video input jacks COMPONENT VIDEO INPUT to the COMPONENT MONITOR OUT jack using 75 Q ohms coaxial video pin plug cords Connecting a TV or DBS tuner e Connect the TV s or DBS tuner s S video output jack S VIDEO OUTPUT to the TV or DBS IN jack using an S Video connection cord OUT CS DT w i o Dhnnnnnngngggng hnnnnnnnttsnnggnnngne z Ze Gen EE The color difference input jacks may be indicated differently on some TVs monitors AJE z Ze Video deck 1 or video components C
148. unit 23 ENGLISH 3 5 Auto Tuner Presets Use this to automatically search for FM broadcasts and store up to 56 stations at preset channels A1 to 8 B1 to 8 C1 to 8 D1 to 8 E1 to 8 F1 to 8 and G1 to 8 NOTE e If an FM station cannot be preset automatically due to poor reception use the Manual tuning operation to tune in the station then preset it using the manual Preset memory operation lt gt Select Auto Tuner Presets at the Input Setup Menu 3 Input Setup 1 Digital In Assign E 2 Ext In Subwoofer Level 3 Component In Assign 4 Video Input Mode g5 Auto Tuner Presets Remote control unit Exit Display the Auto Preset Memory screen 3 5 Auto Preset Memory Auto Tuning amp Preset Station Memory Storing Preset Memory Start 4 Remote control unit Press the CURSOR left button to select Yes Search flashes on the screen and searching begins Completed appears once searching is completed The display automatically switches to screen CH Remote control unit Setting the Advanced Playback Select Advanced Playback at the System Setup Menu System Setup Menu Auto Setup Room EQ Speaker Setup Input Setup e Remote control unit 1 2 3 g4 Advanced Playback 5 Option Setup Exit Display the Advanced Playback Menu screen Remote control unit 24 4 1 Setting the Audio Delay This function allows
149. unit during playback in the DTS NEO 6 mode j L VCR CHANNEL DISC SKIP O umns SURROUND PARAMETER FRONT SURROUND INPUT USE LEARN NOTE e When Default is selected and the CURSOR left button is pressed MODE and TONE are automatically reset to the default values and CINEMA EQ is set to OFF 5 Select the various parameters SURROUND PARAMETER T Main unit e Remote control unit 6 Adjust the parameter settings SELECT O EL Main unit Remote control unit 7 When the surround parameters are set using the buttons on the main unit stop operating buttons after completing the settings The settings are automatically finalized and the normal display reappears after several seconds When the settings are made using the buttons on the remote control unit press the ENTER or SURROUND PARAMETER button to finish 41 ENGLISH 42 Select the input source Playback with a digital input Select an input source set to digital COAXIAL OPTICAL see page 22 FUNCTION O Main unit Remote control unit 2 Set the input mode to AUTO or DTS um O Py Main unit Remote control unit MODE Select the STANDARD Dolby DTS Surround mode SURROUND NEE SELECT d STANDARD Main unit Main unit Remote control unit i TUNED AUTO Tam STEREO ANALOG IECH Dolby Digita
150. up the system e Use the following buttons to set up the system 1 Check that the remote control unit set to AMP mode TAPE CDR MD CD Remote control unit Meee SYSTEM SETUP button Press this to display the system setup menu CURSOR buttons Use these to move the cursors the left right up and down on the screen ENTER button RETURN FRONT SURROUND Press this to switch the display e System setup items and default values set upon shipment from the factory SURROUND PARAMETER ON SCREEN DISPLAY Also use this button to complete the setting 1 Auto Setup Room EQ Auto Setup Room EQ Default settings Set this to switch the surround back channel s power amplifier SURROUND BACK for use for zone2 Power Amp Auto Setup Assignment This parameter is for optimizing the Room EQ with which the audio signals are produced from the All Channel and Frequency 0 dB speakers Manual EQ Setup Room EQ Set the Room EO setting with All or Assign for Setup each surround mode Direct Mode Set the ON OFF setting of Room EQ in the case of Setup the surround mode is in Direct or Pure Direct 5 Mic Input Set this to switch the Mic Input jack for use for Mic Select or V Aux L channel input jack ENG 2 Speaker Setup Speaker Setup Default settings Input the combination of speakers in your Ue Back system and their corresponding sizes SMALL for Front Sp Center Sp
151. using digital matrix processing ES Ee When playing DTS signals the surround back signals undergo digital matrix processing for playback RRE E When a signal identifying the source as a discrete 6 1 channel source is included in the DTS signals the surround back signals included in the source are played PL ABC Cinema ee Processing is performed with the Cinema mode of the PL IIx decoder and the Surround Back channel is reproduced PL Ix VE Processing is performed with the Music mode of the PL IIx decoder and the Surround Back channel is reproduced 2 2ch source GE EE Playback is conducted without using the surround back speaker is EE Playback is conducted using the surround back speaker NOTE This operation can be performed directly using the SURROUND BACK button on the main unit s panel 43 ENGLISH Adjusting the Audio Delay 4 Press the ENTER button and display the i Advanced Playback Menu When watching a DVD or other video source the picture on the monitor may seem delayed with respect to the 4 sound In this case adjust the audio delay to delay the sound and synchronize it with the picture The audio delay setting is stored separately for each input source 4 Advanced Playback g1 Audio Delay 2 Dolby Digital Setup 3 Auto Surround Mode 1 Select the input source FUNCTION Remote control unit O Main unit Remote control unit 2 Set the input mode to AUTO
152. value The input signal can be checked by pressing Checking the input signal ON SCREEN the remote control units ON SCREEN button SIGNAL fs FORMAT DISPL Remote control unit Displays the type of signal DTS DOLBY DIGITAL PCM etc Displays the input signal s sampling frequency Displays the input signal s number of channels Number of front channels Number of channels LFE on off SURROUND is displayed for 2 channel signal sources Surround Mode Dolby Digital EX RoomEQ Norma SIGNAL DOLBY DIGITAL fs 48kHz FORMAT 3 3 1 OFFSET 4dB FLAG Mode MATRIX OSD 1 DTS ES DSCRT6 1 RoomEQ Normal ENGLISH Surround parameters 3 CINEMA EQ Cinema Equalizer The Cinema EQ function gently decreases the level of the extreme high frequencies compensating for overly bright sounding motion picture soundtracks Select this function if the sound from the front speakers is too bright This function only works in the Dolby Pro Logic IIx Dolby Digital DTS Surround DTS NEO 6 and WIDE SCREEN modes The same contents are set for all operating modes D COMP Dynamic Range Compression Motion picture soundtracks have tremendous dynamic range the contrast between very soft and very loud sounds For listening late at night or whenever the maximum sound level is lower than usual the Dynamic Range Compression allows you to hear a
153. x2 ch 2 Q ohms Front Aor B 6 16 Q ohms A B 8 16 Q ohms Center Surround Surr Back Zone2 6 16 Q ohms 200 mV 47 kQ kohms 10 Hz 100 kHz 0 3 dB DIRECT mode 102 dB DIRECT mode 0 005 20 Hz 20 kHz DIRECT mode 1 2 V Rated output 2 V at 0 dB playback Total harmonic distortion 0 008 1 kHz at O dB S N ratio 102 dB Dynamic range 96 dB Format Digital audio interface Phono equalizer PHONO input REC OUT Input sensitivity RIAA deviation Signal to noise ratio Rated output Maximum output Distortion factor HM Video section Standard video jacks Input output level and impedance Frequency response S video jacks Input output level and impedance Frequency response Color component video terminal Input output level and impedance Frequency response E Tuner section Receiving Range Usable Sensitivity 50 dB Quieting Sensitivity S N IHF A Total Harmonic Distortion at 1 kHz E General Power supply Power consumption Maximum external dimensions Mass HM Remote control unit RC 975 Batteries External dimensions Mass 2 5 mV 1 dB 20 Hz to 20 kHz 74 dB A weighting with 5 mV input 150 mV 8V 0 03 1 kHz 3 V 1 Vp p 75 Q ohms 5 Hz 10 MHz 0 3 dB Y brightness signal 1 Vp p 75 Q ohms C color signal 0 286 Vp p 75 Q ohms 5 Hz 10 MHz 0 3 dB Y brightness signal 1 V
154. xit and press the 1 Auto Setup Room EQ ENTER button at the Auto Setup Rute Satan Manual EQ Setup Room EQ Menu screen Ee The System Setup Menu Dierect Mode Setup Mic Input Select reappears EQ Parameter Check Remote control unit Remote control unit Exit ENGLISH 17 ENGLISH e Crossover Frequency and Subwoofer Mode Setup is not displayed when not using a subwoofer 1 e The composition of the signals output to each channels and the frequency response are adjusted 18 3 Remote control unit Remote control unit Select Speaker Setup at the System Setup Menu Display the Speaker Setup Menu screen 2 1 Setting the type of speakers automatically according to the combination of speakers actually being used Set Remote control unit Remote control unit Select Speaker Config at the Speaker Setup Menu Display the speaker configuration screen as below System Setup Menu 1 Auto Setup Room EQ 2 Speaker Setup 3 Input Setup 4 Advanced Playback 5 Option Setup Exit 2 Speaker Setup GI Speaker Config 2 Delay Time 3 Channel Level 4 Crossover Frequency 5 Subwoofer Mode Setup Exit 2 Speaker Setup GI Speaker Config 2 Delay Time Channel Level 3 4 Crossover Frequency 5 Subwoofer Mode Setup Exit H Setting the Speaker Setup 3 lt gt oe connected or not and if so their size parameters ZE Spea
155. y for music Select the mode to suit your tastes PURE DIRECT mode In this mode the music is played with an extremely high level of sound quality When this mode is set all the video related circuits are turned off so that music signals can be reproduced with high quality When an analog mode is selected the digital processing circuitry is also turned off to achieve analog sound with even higher purity See NOTES PURE DIRECT PURE DIRECT D Main unit Remote control unit DIRECT mode Use this mode to achieve good quality 2 channel sound while watching images In this mode the audio signals bypass such circuits as the tone circuit and are transmitted directly resulting in good quality sound DIRECT Remote control unit STEREO mode Use this mode to adjust the tone and achieve the desired sound while watching images STEREO Remote control unit NOTES e The system setup function cannot be used when the PURE DIRECT mode is set To use the system setup function cancel the PURE DIRECT mode e The ZONE2 video output is not output in the PURE DIRECT mode e The channel level and surround parameters in the PURE DIRECT mode are the same as in the DIRECT mode e When the PURE DIRECT button is pressed while in the PURE DIRECT mode the PURE DIRECT mode is cancelled e The subwoofer s channel level must be set to OFF in order to turn off the digital circuit in the PURE DIRECT mode Afte
156. you to adjust the time delay of the video and audio signals and store these settings for the different input sources The setting is made while watching a DVD or other software so it is not made here By default this is not displayed when no digital signals are being input For instructions on making the setting refer to page 44 NOTE The audio delay setting does not apply when it plays in the EXT IN mode or in the analog input direct mode or stereo mode TONE DEFEAT ON 4 2 Setting the Dolby Digital Setup Sets the down mixing method when not using a center speaker or Surround speakers OFF The dynamic range is not compressed ON The dynamic range is compressed automatically according to the combination of speakers being used Select Dolby Digital Setup at the Advanced Playback Menu 4 Advanced Playback 1 Audio Delay g2 Dolby Digital Setup 3 Auto Surround Mode Remote control unit Press the ENTER button Display the Dolby Digital Setup screen Remote control unit Si Remote control unit Select ON if you want to use the Compression OFF if you do not want to use it 4 2 Dolby Digital Downmix Option Setup Compression ONT 4 gt Oia NOTE When a center speaker or surround speakers are not used the sound is played from the front speakers Set Compression to ON if it seems that sound is distorted because the input leve
157. z 90 1 90 1 90 1 MHz 90 1 MHz 90 1 MHz 90 1 MHz 90 1 MHz 90 1 MHz Auto Surround Mode ON Trigger Out2 Setup Muting Level On Screen Display Setup Lock Set the Trigger Out2 output for the each input sources This sets the amount of attenuation at audio output muting This sets whether or not to display the on screen display that appears on the monitor screen when the controls on the remote control unit or main unit are operated A setting to prevent flickering Set whether or not to lock the system setup settings so that they cannot be changed ZONE 2 S j dB minimum On Screen Display ON Mode 1 Setup Lock OFF Surround modes and parameters E Surround modes and parameters Signals and adjustability in the different modes Channel output FRONT SURROUND SURROUND X E When playing Dolby Digital signals When playing DTS signals When playing PCM signals When playing ANALOG SUB signals Mode WOOFER DIRECT PURE DIRECT STEREO EXTERNAL INPUT DOLBY PRO LOGIC H DOLBY PRO LOGIC II x DOLBY DIGITAL SURROUND SUPER STADIUM CLASSIC CONCERT VIRTUAL O x x x O O O O O Signal Adjustable O Able x No signal x Unable Turned on or off by speaker configuration setting Only for 2 ch contents DIRECT PURE DIRECT O OFF O OFF Re 4 m I m O EXTERNAL INPUT DOLBY PRO LOGIC II

Denon AVR-2805 User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents