Home

Dell Microsoft Windows Unified Data Storage Server 2003 (PowerVault NX 1950) Reference Guide

image

Contents

1. Issue RAID 1 and RAID 10 are both reported as RAID1_0 and are referred to as mirrored In the Gateway solution the PowerPath application logs an error Cluster resources may cause errors when you enable Single Instance Storage SIS ona PowerVault NX1950 cluster The Microsoft Management Console hangs during an operation Inconsistency between the slot number displayed in Microsoft Management Console and PowerVault Modular Disk Storage Manager Quorum disk is created automatically from the available disks In the Integrated solution password protected PowerVault MD3000 arrays are not supported Microsoft Services for NFS does not validate the domain name Setting quota limit that is larger than the LUN size does not display an error message In the PowerVault MD3000 storage array new LUNs cannot be created in a disk group Mounting shared volumes using network file system NFS displays an error in Linux clients Unauthenticated users can configure storage with Dell EMC arrays Description You have an option to create either a RAID 5 ora mirrored LUN When you create a mirrored LUN the default is two disks which is actually striping with mirroring without parity and not a mirrored LUN In the Gateway solution you may see a PowerPath error after you upgrade from the Windows Unified Data Storage Server 2003 Standard Edition to the Enterprise Edition
2. The API allocates a safe buffer zone during the estimation of the maximum size of the RAID group due to the required 5 7 overhead of the RAID group Anew RAID group with additional disks may have been created In Gateway solutions actual After a successful LUN creation the reported LUN size is smaller than the Verify maximum allowed LUN size through LUN extension Size is smaller requested LUN size from the Share and Storage Management wizard Navisphere Manager than the requested size The API allocates a safe buffer zone during the estimation of the maximum LUN size The maximum LUN size also depends on the RAID type The overhead is approximately 5 7 of the LUN size For example in a LUN of size 100 GB 2 TB is allocated to overhead Upgrade Issues Table 1 5 provides a list of issues you may encounter during an upgrade and the possible workaround or solution Table 1 5 Upgrade Issues Issue Description Workaround Solution If Firewall is enabled during If the Windows firewall is enabled during upgrade from Disable the firewall before starting the upgrade upgrade it may cause issues Windows Unified Data Storage Server 2003 Standard Edition to Windows Unified Data Storage Server 2003 Enterprise Edition the Microsoft iSCSI Software Target console fails Importing Virtual Disks If you do not unassign the LUNs from a system correctly You must clear the SCSI reservation on the virtual disks before re
3. The information in the system event log is either cached disk or LUN that is not yet deleted You can ignore this message This feature is working as designed To delete a snapshot created from a shadow copy delete the entire shadow copy Reboot the system and execute the command again To work around perform the following procedure Stop the share on the volume to be extended From the Disk Management wizard delete volume partition Go to Share and Storage management Volumes and click Refresh Convert to GPT from Disk management Format and assign a drive letter to the new volume from disk management Refresh the Share and Storage Management console You can now extend the volume Extend the LUN from Navisphere Manager Extend the volume from Disk fails management or Diskpart utility In Gateway solutions the Any LUN that is greater than 2 TB is reported as 2 TB in the Storage This is a known issue Storage Manager for SANs Manager for SANs console console displays incorrect LUN size when LUN is greater than 2 TB In the Gateway solution The reported initial maximum size can be extended based on the Verify the maximum allowed LUN size through extension to maximum LUN size requirement of the RAID group it is a part of The reported maximum size Navisphere Manager grows for LUN extension increases after the extension operation on the storage array because of the one or both of the following factors
4. Change the variable value to a path volume that has sufficient space to accommodate all modified blocks of whd file If you know that the available space is sufficient for rollback retain the default value After a Rollback operation go to Application Event log and confirm the successful Rollback NOTE Do not run concurrent Rollback operations NOTE Download the iSCSI Failover Utility from the Dell support website support dell com and run it on the hosts connected to NX1950 This registry fix changes the disk timeout to 160 seconds on the hosts to prevent disk timeouts during RAID failover on the storage subsystem You should run the iSCSI Failover Utility before you establish iSCSI sessions You can download it from the Dell support website support dell com It is recommended that you use a separate network for iSCSI traffic The iSCSI initiator must point to the dedicated iSCSI virtual IP address for the cluster to failover It is recommended that you use a separate network for iSCSI traffic To re establish connection to the iSCSI LUN perform the following steps 1 Stop the Microsoft iSCSI Target Service and then close the PowerVault NX1950 Management Console 2 Go to cluadmin exe gt Groups Cluster Group 3 Right click the Cluster Group and select New Resource 4 In the New Resource window enter WinTarget as the Service and select Resource Type as generic resource 5 In the Dependencies window add the clu
5. known issue This feature is working as designed To perform this action you must og in as an administrator This is a known issue This is a known issue To resolve this issue call Dell Technical Support This is a known issue Perform the following steps 1 Terminate the Dell Storage Initialization Wizard application using the Windows Task Manager 2 Restart the Dell Storage Initialization Wizard from the PowerVault NX1950 Management Console Click Start All Programs Administrative Tools Windows Unified Data Storage Server To workaround this issue run the Dell Storage Initialization wizard completely without interruption For download instructions and location of the firewall script see the Dell PowerVault NX1950 Systems Deployment Guide located on the Dell Support website at support dell com NOTE Ensure that adequate security precautions are in place before proceeding with the workaround for this issue The Action Pane displays More Actions instead of List of Actions In Windows Unified Data Storage Server 2003 Standard Edition automatic failback is not enabled by default In the Gateway solution creation of LUN is allowed when no users are added to the system configuration symcfg In the Gateway solution the LUN Creation Wizard does not display an error when the storage group is full Unable to extend volume during I O Network Interface Card NIC Teaming is not supported for
6. using Storage Manager for SANs the LUN is not accessible from the Disk Management wizard During multiple Async LUN creation using Storage Manager for SANs the available capacity is not reported accurately Do not perform more than four provisioning operations simultaneously After you successfully create a LUN using Storage Manager for SANs the LUN may take a few minutes to initialize Before accessing the LUN ensure that 100 LUN initialization has occurred Until the complete initialization of a LUN occurs the VDS provider reports the previous available advertised capacity before the provisioning operation was performed The maximum LUN size grows after extending to the previously advertised This is a limitation when you are using maximum LUN size In some instances attempt to extend to the new advertised capacity may fail Dell EMC storage arrays Extension of LUN fails if different disk types FC SAS SATAx are included Combination of different types of disks is not in the same disk group supported NT Backup may fail using AX4 5 with EMC VSS hardware provider installed Symantec Backup Exec may fail on AX4 5 storage arrays when the EMC VSS hardware provider is installed LUN extension fails An attempt to extend an existing LUN size value to greater than 2 TB fails The Assign function in Storage manager for SANs only exposes the LUN volumes to the hosts and does not assign it to the cluster group or
7. 1 Click OK and then click Browse 2 Browse to C Windows amd64 amd64 directory and select convlog ex_ file Click Open Click OK to continue installation When you are installing MUI packs you are prompted to insert the Windows Unified Data Storage Server 2003 SP2 media for the second time Perform the following steps Click OK Click Browse Browse to C Windows amd64 amd64 lang directory and select cplexe ex_ file Click Open Click OK to continue installation No warning message is No Warning message is displayed when you install a new version of Dell This feature is working as designed displayed when you upgrade Storage Initialization Wizard over the factory installed version of the Dell the Dell Storage Storage Initialization Wizard Initialization Wizard In the Integrated solution In the Dell Storage Initialization Wizard the Configure a Name for your Follow these guidelines when you create an the Dell Storage PowerVault MD3000 array field does not validate the text entered The array name Initialization Wizard does array field accepts all special characters such as and but not validate the PowerVault replaces the unsupported characters If the length of the text exceeds 30 Do not use spaces in the array name MD3000 Storage array name _ characters the array field uses the previous array name of the PowerVault Do not use the special characters like MD3000 storage array without displayin
8. Dell PowerVault NX1950 Systems Important Information Critical System Information Installation and Setup Issues Deployment Issues Management Issues Upgrade Issues Model EMU01 Notes and Notices K NOTE A NOTE indicates important information that helps you make better use of your computer NOTICE A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem Information in this document is subject to change without notice 2006 2008 Dell Inc All rights reserved Reproduction in any manner whatsoever without the written permission of Dell Inc is strictly forbidden Trademarks used in this text Dell the DELL logo OpenManage and PowerVault are trademarks of Dell Inc Microsoft Windows and Windows Server are either trademarks or registered trademarks of Microsoft Corporation in the United States and or other countries Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products Dell Inc disclaims any proprietary interest in trademarks and trade names other than its own February 2008 Rev A06 Back to Contents Page Dell PowerVault NX1950 Systems Important Information Critical System Information Installation and Setup Issues Deployment Issues Management Issues Upgrade Issues This document provides important information about Microsoft Wi
9. HA instances NT backup is not supported with EMC AX4 5 arrays when VSS hardware provider is installed To work around the issue uninstall the VSS hardware provider Symantec backup is not supported with EMC AX4 5 storage arrays when VSS hardware provider is installed To work around the issue uninstall VSS hardware provider To resolve this issue ensure that the LUN you are extending is initialized To verify that the LUN is initialized go to Start gt Programs Dell Modular Disk Storage Manager If the LUN is being initialized wait for the initialization to complete To workaround this issue Back up or move all data on the basic master boot record MBR disk that you want to convert into a GUID partition table GPT disk If the disk does not have partitions or volumes skip to step 3 To backup data a Stop sharing the volume using the Share and Storage Provision wizard Launch Clu admin take off line and delete Unassign the volume from the cluster group and assign to a local server using SMFS Using the Disk Management window re scan the disks to update the extend status At the command prompt type diskpart If the disk does not contain any partitions or volumes skip to step c At the DISKPART prompt type a list volume and record the number of the volume that you want to delete select volume delete volume list disk and record the disk number of the disk that you want to convert to a GPT disk sel
10. ab of the Volume Properties window SIS is disabled on subsequent volumes and no error message is displayed When you are creating a LUN though you select the This Server only option in Provision Storage Server Assignment the LUN is assigned to all nodes in the cluster When you create a volume on a LUN of less than 8 MB using the Storage Provision wizard the volume cannot be formatted When you try to start or stop the User Name Mapping Client for NFS or Server for NFS service from the Microsoft Service for NFS the following error message is displayed Unspecified user In the Storage Provision wizard the PowerVault MD3000 storage array is labeled as Fiber Channel even though it is not a Fiber Channel connection This issue occurs because the Dell Storage Initialization Wizard encountered an error condition and exited before completing the configuration In certain cases the error message disappears from the screen without user interaction The Dell OpenManage Help window is displayed in English and not in the language of the selected environment such as French German Japanese Korean Simplified Chinese Spanish or Traditional Chinese Dell Storage Initialization Wizard may stop responding if the desktop is locked while Dell Storage Initialization Wizard is configuring the system NOTE This error occurs if you exit the Dell Storage Initialization Wizard while it is running Microsoft Error Reporting displays t
11. all volumes that failover are displayed as Simple The LUN type for volumes created from the passive node in a cluster is displayed as unknown in the Share and Storage Management wizard of the active node An error message is displayed when reverting a shadow copy of volume that is a part of a cluster group If you run the Share Provision wizard from Share and Storage Management wizard after uninstalling the File Server Resource Manager using Add or Remove Programs the following error message is displayed Unhandled exception in managed code snap in Share and Storage Management wizard is removed from the PowerVault NX1950 Management Console When two Create LUN operations are performed in rapid succession the Storage Manager for SANs console does not remove the available drive letters This issue is indicated by an error message related to volume creation failure After you delete a volume through the Storage Manager for SANs console the volume continues to display under the Disk Management console If you select the deleted volume the PowerVault NX1950 Management Console crashes While creating or deleting LUNs the following error message is reported in the Windows application log Storage Manager for SANs encountered the following error s while loading information from Virtual Disk Service VDS provider s Some of the functionality may not be available on the hardware provider s or VDS hardware Disk o Group Choo
12. deploying an operating system the pre existing manually LUNs may be unavailable in the new operating system due to SCSI reservation NOTE For more information about the commands required to clear SCSI reservation on virtual disks see the Dell PowerVault MD3000 Storage Manager CLI Guide iSCSI Software Target console f you create iSCSI virtual disks or targets before the node Perform the following steps crashes if a node has iSCSI joins the cluster the iSCSI Software Target snap in virtual disks assigned to it crashes 1 Stop the Microsoft iSCSI Target Service and then before joining the cluster close the PowerVault NX1950 Management Console Launch cluadmin exe Groups Cluster Group Right click the Cluster Group and select New Resource In the New Resource window enter WinTarget as the Service and select resource type as Generic Resource In the Dependencies window add cluster IP address and cluster name of your current single node cluster Add the registry key SOFTWARE Microsoft iSCSI Target Select the WinTarget resource and bring it online Disable the firewall and delete the cache file located at APPDATA Microsoft MMC nas2 Start the Microsoft iSCSI Software Target Service Launch the PowerVault NX1950 Management Console Back to Contents Page
13. ect diskn f convert gpt After converting to GPT disk format provide a drive letter to this volume Using Diskpart select the new volume and extend Using the Disk Management window verify that the size of the new volume is correct Add this volume as a resource in the cluster group Refresh the Share and Storage Management interface To include the LUN volume in the cluster group perform the following steps 1 Assign the LUN to the cluster 2 In the Dell PowerVault Modular Disk Storage Manager verify that the LUN has been assigned to the Host Group 3 In Disk Management verify that the disk is basic and assign it a drive letter 4 Launch Cluster Administration by clicking Start gt Administrative Tools gt Cluster Administrator Groups Right click Cluster Group and select New Resource 5 Enter the following required information o Name o Description o Resource Type Choose Physical The Share Provision wizard allows a share to be created in an existing shared folder without displaying a warning that the current file settings may be erased Long failover time on the PowerVault MD3000 storage array Uninstalling and Reinstalling File Server Resource Manager displays two consoles in the PowerVault NX1950 Management Console LUN type for a failed over volume in a cluster is displayed as Simple LUN type for volume displayed as unknown in a cluster Reverting the s
14. g any error message or in the array name Ensure that the array name does not exceed 30 characters Firewall script is not The firewall script is not installed automatically from the Dell Systems Build For the correct installation procedure see the automatically installed and Update Utility media Dell PowerVault NX1950 Systems Deployment Guide available on the Dell Support website at support dell com Internet Information Server The IIS component is installed by default either from the factory or during This is working as designed IIS is a prerequisite IIS is installed by default a restore of Windows Unified Data Storage Server 2003 x64 operating for the PowerVault NX1950 storage solution system using the Dell PowerEdge Installation and Server Management media Virtual Disk Service VDS After you install VDS VSS provider on the PowerVault NX1950 storage Reboot the system after installing the VDS VSS Volume Shadow Copy solution and the PowerVault MD3000 storage array the installer does not provider Services VSS provider prompt you to reboot the system and causes the Storage Management installer does not prompt you console to behave unpredictably to reboot the system Deployment I ssues Table 1 3 provides the list of issues you might encounter during deployment of the PowerVault NX1950 storage solution and the workaround Table 1 3 Deployment Issues and Solutions
15. g navisphere log in right click on the storage array of your choice at the step Assign LUN to a server or cluster and select properties n the properties window select the storage access tab and check the access control enable check box Creating a LUN through storage manager for SANs fails Using navisphere log in right click on the storage array of your choice at the step Assign LUN to a server or cluster and select properties n the properties window select the storage access tab and check the access control enable check box Rerun the Dell Storage Initialization Wizard Management I ssues Table 1 4 provides information about the issues you may encounter when you perform management activities on the PowerVault NX1950 storage solution and the possible workaround solution Table 1 4 Management Issues Description Workaround Solution The Microsoft Management Console hangs LUN is not accessible Inaccurate LUN capacity is displayed In a Gateway solution increasing LUN capacity may fail LUN extension fails NT Backup fails Symantec Backup Exec passes with exceptions In an Integrated Solution LUN extension fails Extending a LUN size to a value greater than 2 TB fails LUN does not failover The Microsoft Management Console may hang when multiple Storage Manager for SANs provisioning operations run in parallel through the Async feature After you successfully create a LUN
16. hadow copies in Microsoft Cluster Services fails Launching the Share Provision wizard after uninstalling the File Server Resource Manager results in a storagemgmt dll console error The Storage Manager for SANs console does not remove the available drive letters assigned to a volume Deleted drives or volumes in the Disk Management console cause the system to crash VDS errors are reported in the Windows application log The Share and Storage Management wizard allows you to create a new shared folder in an existing shared folder without warning that this may erase the File Screen settings of the existing shared folder The File Screen setting for all shares in the Share tab of the Share and Storage Management wizard is checked However only the last File Screen setting is applied to the share The PowerVault NX1950 storage solution supports redundant paths through a single or dual Serial Attached SCSI SAS Host Bus Adapter HBA controller When you configure the PowerVault NX1950 storage solution to support a redundant path through a single controller the failover takes a longer time during heavy input output However there is no loss of data due to a delay in failover When you uninstall and reinstall File Server Resource Manager one console is displayed under the Share and Storage Management wizard and the other console is displayed under PowerVault NX1950 Management Console In the Share and Storage Management wizard
17. he Microsoft Management Console Log off and Log on to the system and re open the Microsoft Management Console Restart your system There is no workaround This feature is working as designed The quorum disk cannot be selected by the user Before you create a cluster it is recommended that you allocate storage space on the storage array and ensure that RAID 1 volume is available Do not password protect the PowerVault MD3000 Storage Array OR Set a password through the SMReg tool The tool is a part of the VDS provider and is located in the installation directory To work around this issue use the Identity Mapping wizard to validate the domain name This wizard can be launched from the Microsoft Services for NFS console Verify the LUN or volume size before setting a quota limit Extend the existing LUNs size Use the PowerVault Modular Disk Storage Manager to create LUNs and assign the LUNs to the system manually To work around this issue perform the following steps 1 Click Administrative tools Local Security Policy Local Policies User Rights Assignment Bypass Traverse Checking 2 Click Add User or Group add anonymous logons and click OK to apply 3 Run the following command from the Linux client command prompt and then reboot the server gpudate server Run the Dell Storage Initialization Wizard and log in to the array The privileged users list is now populated thereby preventing unauthorized use
18. he following application error message while using the Dell Storage Initialization Wizard Some unexpected errors have happened to the software you recently used The following ports must be open UDP port 80 http UDP port 111 Portmap UDP UDP port 1048 NFS MountUDP UDP port 2049 NFS Server UDP UDP port 1047 NFS Lock UDP UDP port 1039 NSM UDP UDP port 162 SNMP UDP port 2162 Array Init 1 UDP port 2163 Array Init 2 UDP port 137 NetBIOS Name Service UDP port 138 NetBIOS Datagram Service TCP port 80 IIS TCP port 135 RPC TCP port 3260 ISCSI TCP port 111 Portmap TCP TCP port 1048 NFS Mount TCP port 2049 NFS Server TCP TCP port 1047 NFS Lock This is a known issue To work around this issue run the following command from the command prompt to fully enable the SIS features sisadmin i lt volume gt When you enable SIS on subsequent volumes through the Graphical User Interface GUI the SIS service is stopped You must restart the SIS service manually through the services msc application for each volume For more information see Knowledge Base article 913109 on the Microsoft Support website at support mircosoft com You can create Private LUNs manually only using the Dell PowerVault Modular Disk Storage Manager For more information see the Dell PowerVault Modular Disk Storage Manager User s Guide located on the Dell support website at support dell com This is a
19. iSCSI In the Gateway solution VDS provider initialization fails if user name contains spaces In the Gateway solution LUN can not be assigned either to a server or cluster In the Gateway solution Quorum disk can not be assigned to a cluster TCP port 1039 NSM TCP port 25 Storage Processor TCP port 443 Java CLI Secure TCP port 137 NetBIOS TCP TCP port 139 NetBIOS Session Service TCP port 445 SMB over TCP TCP port 3389 Remote Desktop The Action pane in the PowerVault NX1950 This feature is working as designed Management Console displays the menu name as More Actions instead of List of Actions When you click More Actions the menu is displayed This issue is observed in the following consoles Microsoft Services for NFS iSCSI Software target Indexing Service Local User and Groups Event Viewer Performance Logs and Alerts The PowerVault NX1950 solution software does not set To enable failback manually see the Dell PowerVault MD3000 User s the LUN_Rebalance registry key to enable re balancing Guide available on the Dell Support website at support dell com This prevents automatic failback NOTICE Any unintended changes to the registry may cause problems This problem occurs if This feature is working as designed No authorized users have been added to the privileged user s list on each storage processor Invalid users are added to the privileged u
20. lable free space in disk groups using the PowerVault NX1950 Management Console When you mount a share on a Linux client the following error message is displayed mount lt NASServerName gt lt ShareName gt can t read superblock Before the privileged users list is populated on Dell EMC arrays all users with administrator rights can successfully perform operations in the Storage Manager for SANs and in the Storage Provision Workaround Solution This is working as designed Reinstall PowerPath using the Repair option Ensure that you have administrative privileges on the domain controller This issue is currently being investigated by Microsoft If you have already configured SIS in a cluster environment you can either disable SIS or the volume can be UN SISed by performing the following Disable SIS recommended a To recover from failed resources reboot the cluster nodes one after the other This forces the resources to move to a node Open a command prompt on the node which owns the physical disks and run the following command sisadmin d Move the group to the other node and do the same This ensures that Groveler service is stopped and the resources can failover successfully 1 UN SIS the shared physical disks a Backup the data on the shared physical disks b Delete and recreate the volumes c Restore the backed up data To work around this issue perform one of the following Close and restart t
21. n Manage Server Connections section access to the LUN is removed automatically Sorting By Size does not work as expected In the PowerVault NX1950 Management Console the columns are sorted based on the character value instead of the numeric value This issue occurs in the following wizards Create LUN wizard Subsystem and type Provision a Shared Folder wizard Shared Folder location Provision Storage wizard LUN type For example the rows are sorted depending on the string value such as 1 10 100 2 20 200 and so on instead of 1 2 10 20 100 200 Cannot restore Java RDP session after it has been minimized It is not possible to restore a Java Remote Desktop Protocol RDP session to full screen mode after it has been minimized Attempting to restore the session appears unrecoverable The diagnostic report for the Distributed File System DFS replication group generates an error When you create a diagnostic report for a replication group the following error message appears The health report cannot be generated Error HRESULT E_FAIL has been returned from a call to a COM component In the Gateway solution the Blink Drive Light option returns warning messages and does not work When using the Storage Managers for SANs the Blink Drive Light feature does not work Microsoft Management Console does not allow you to unassign ports WWN s if a LUN is assigned Manage Server connections does n
22. ndows Unified Data Storage Server 2003 operating system installed on your Dell PowerVault NX1950 storage solution K NOTE Throughout this document the term Integrated solution refers to the configuration of PowerVault NX1950 storage systems with PowerVault MD3000 storage arrays The term Gateway solution refers to the configuration of PowerVault NX1950 storage systems and Dell EMC storage arrays For more information see the Installation Guide that shipped along with your system Critical System I nformation Table 1 1 describes the critical system issues you may encounter and the workaround for the issues Table 1 1 Critical System Information Issue Description Snapshots are lost after node failover This problem occurs if the volume properties and snapshot settings are not selected and confirmed in the cluster nodes Subsequent node failover may result in loss of snapshot due to insufficient space and incorrect settings Rollback operation fails and the system state does not roll back to the chosen iSCSI snapshot This problem occurs as the TEMP folder in the default System variables path C WI NDOWS TEMP does not have enough space to accommodate the modified blocks of a iSCSI LUN vhd file The event is logged in the Application Event log as a WinTarget event with the following details The Microsoft iSCSI could not roll back lt virtual disk ID gt to the snapshot taken The operation failed with error c
23. ode lt node name gt forcecleanup the system displays an error notifying you the attempt was unsuccessful Extending a GUID partition table GPT volume in Gateway solutions fails If you extend a GPT volume without refreshing in Share and Storage Management wizard the volume extension fails In Gateway solutions maximum extension on Dell EMC AX150 storage array After you create a 2 TB LUN or volume on an unpartitioned AX150 storage array you cannot extend to maximum This issue occurs if you use the Share and Storage Management wizard During the File Screening operation the files in the Files to include list have higher precedence over the files in the Files to exclude list Symantec addresses this issue with Knowledge Base article 285187 located on the Veritas Support website at support veritas com For more information about removing replacing and deleting nodes from the cluster see Dell PowerVault NX1950 Cluster Systems Installation and Troubleshooting Guide that shipped with your storage system This is a known issue To work around this issue close and relaunch the browser to establish the session with the remote system For more information see the Microsoft Knowledge Base article 912154 located on the Microsoft Support website at support microsoft com Working as designed This is a known issue To workaround this issue close and restart the Microsoft Management Console or reboot the system
24. ode 112 Disk timeout occurs on the host during RAID failover Host disks timeout during RAID failover Connection to the iSCSI logical unit number LUN is lost when a cluster failover occurs On the iSCSI Target The network settings for the Microsoft iSCSI Software Target are reset on cluster nodes when a resource group fails The specified settings are lost and the network IP addresses including the public and private IP addresses for the cluster nodes are enabled for iSCSI storage requests If the iSCSI target is not a part of the cluster resource connection to the target is lost during failover Workaround Solution To ensure proper working of snapshot 1 Go to Windows Explorer gt Volume properties gt File System where iSCSI vhd file resides Shadow Copies Settings 2 Ensure that the volume entry for the option Located on this volume is populated with the same value as the chosen volume drive letter Ensure that the maximum size default value is Use limit can accommodate snapshots If not change the value according to the space requirement or change the settings to No limit and select OK If the default setting contains sufficient space for snapshots open the Volume properties Shadow copies Settings tab and select OK To work around this issue Right click My computer Properties Advanced Environment Variables In the System Variables section select TEMP and Click Edit
25. or after you join a domain If you enable SIS on a shared physical disk resource on a PowerVault NX1950 cluster and then attempt to move a group with one of the shared physical disks the resource does not move between nodes and fails eventually The other physical resource may also fail The Microsoft Management Console stops responding or hangs during an operation execution In the PowerVault NX1950 Microsoft Management Console the storage enclosure slots are numbered from 1 to 15 The same slots are numbered from 0 to 14 in the PowerVault Modular Disk Storage Manager The PowerVault NX1950 Management Console automatically selects the quorum disk from the available disk or volume even if data exists on the disk or volume However the existing data on the disk or volume is not erased The Dell Storage Initialization Wizard cannot configure password protected PowerVault MD3000 arrays It does not display an error message indicating that the configuration has failed The Active Directory Domain field in the Microsoft Services for NFS Properties window accepts any value and the value in this field is not validated to ensure if the domain name exists This issue causes problems when you access NFS services within a domain The PowerVault NX1950 Management Console does not display a warning message when you set the quota limit larger than LUN size If all the disks are assigned to disk groups you cannot create a LUN on the avai
26. ot allow you to unassign ports if LUNs are created previously and or assigned to the array when you attempt to select the port When you attempt to perform this action the Microsoft Management Console crashes System event log displays EMC Powerpath dead path for a deleted LUN When you delete a LUN is from the Microsoft Management Console the System Event Log displays a Powerpath dead path error In the Gateway solution the Create LUN wizard displays an incorrect value of the available free space Unable to delete iSCSI snapshots via the Microsoft Management Console using the Microsoft iSCSI snap in 19 of the total storage capacity is allocated for overhead requirements and no data can be stored in this space However this is displayed as available free space When you create volume shadow copy on a volume a snapshot is created for each iSCSI virtual disk existing on the volume You can view restore or mount the snapshots from the Microsoft Management Console by going to Microsoft iSCSI Software Target Snapshots Active Snapshots This issue occurs when you deploy multiple iSCSI virtual disks on a volume and the volume has volume Shadow Copy When you delete an iSCSI Snapshot that is on this volume the Snapshot is not be deleted and another copy of the snapshot of other iSCSI virtual disks appear in the list Attempt to evict a node from cluster causes a CLI error After you execute the CLI command cluster n
27. rs from accessing the storage array Default time for scheduling task when idle is 10 minutes and cannot be reset Enabling Single Instance Storage SIS on the first volume disables SIS on the subsequent volumes Limitations while creating private LUNs with the PowerVault MD3000 array Storage Provision wizard fails when formatting a volume less than 8 MB Error message is displayed when you start or stop the NFS service The PowerVault MD3000 storage array is labeled as Fiber Channel in the Storage Provision wizard Dell I nitial Configuration Tasks wizard or PowerVault NX1950 Management Console does not start after Dell Storage Initialization Wizard has initialized The Dell OpenManage Help window in the PowerVault NX1950 Configuration Tasks Wizard appears in English irrespective of the language setting Dell Storage Initialization Wizard may stop responding Microsoft error reporting displays Dell Storage Initialization Wizard application errors Enabling Windows Firewall wizard When the privileged users list is populated all administrator users that are not a part of this list cannot access the storage array and manage the LUNs that are created The value for Schedule Task When Idle cannot be set to a different value The value you enter is not retained and the default value 10 minutes is used When you enable SIS on the first volume using the Advanced t
28. se Cluster Group 6 Click Next 7 Verify that all cluster nodes are in the Possible Owners window and click Next 8 Select the following dependencies o Cluster IP Address o Cluster Name o Physical Disk of Choice 9 Click Add and then click Next 10 Complete the wizard and then click Finish 11 Right click Resource and choose Online The disk is now a part of the cluster 12 Inthe Share and Storage Management window refresh the Volumes tab This is a known issue For more information see the Knowledge Base article 940467 at the Microsoft Support website at support mircosoft com You can ignore the snap in that appears below PowerVault NX1950 Management Console To refresh the RAID type 1 In the second node where the volumes are displayed as Simple go to Disk Management Go to Share and Storage Management Volumes and click Refresh Go to the Disk Management window and perform a refresh Go back to the Share and Storage Management wizard and perform a refresh All the LUNs are now displayed properly Remove the volume from the cluster resources and revert the shadow copy After a successful revert add the volume back to the cluster group For more information see the knowledge base article KB945361 on the Microsoft Support website at support microsoft com To reinstall the File Server Resource Manager perform the following steps 1 Go to Control Panel Add or Remove Programs Add or Remo
29. ser s list on each storage processor Authorized users are manually added to the agent config file The storage group has a maximum of 256 LUNs that This is a known issue can be assigned to the storage group Any additional LUNs created through Storage Manager for SANs console are not assigned to the storage group No warning or error messages are logged in the event log If the volume being extended also requires a LUN to be To extend a volume while I O is running extended the volume extension fails while I O is running Extend the LUN through the Storage Manager for SANs console Extend the LUN using Diskpart For more information on Diskpart see the Microsoft Support website at support microsoft com As per Microsoft s specification NIC Teaming is only For more information about NIC teaming see the Microsoft Windows supported for file protocols and not iSCSI Server 2003 technology centers website at www microsoft com windowsserver2003 technologies While configuring Dell EMC arrays using the Dell Ensure that the array administrator username does not contain space Storage Initialization Wizard you must enter the s array administrator username and password If the administrator username contains a space the Dell Storage Initialization Wizard completes successfully but the Share and Storage Management wizard displays a VDS initialization error Creating a LUN through storage manager for SANs fails Usin
30. ster IP address for management network only the dedicated iSCSI virtual IP address and cluster name of the current single node cluster 6 Add the registry key located at software Microsoft iSCSI Target Select the WinTarget resource and bring it online Disable the firewall and delete the cache file located at APPDATA Microsoft MMC nas2 9 Start the Microsoft iSCSI Target Service 10 Launch the PowerVault NX1950 Management Console NOTE It is recommended you configure iSCSI traffic on a dedicated network separate from the one you use for file share access Create an additional IP network resource in the cluster group containing the iSCSI Target service resource like Cluster Group Configure the iSCSI initiators to connect to the iSCSI target using the IP address of the separate network you created Installation and Setup Issues Table 1 2 provides issues that you may encounter while setting up your cluster or installing software and the workaround for the issues Table 1 2 Installation and Setup Issues Issue Description Workaround Solution Windows Unified Data When you install or restore the operating system on your system you are When you are prompted to insert the Windows Storage Server 2003 SP2 prompted to insert the Windows Unified Data Storage Server 2003 SP2 Unified Data Storage Server 2003 SP2 media for media is requested during media the first time perform the following operating system installation
31. ve Windows Components Management and Monitoring Tools Select File Server Resource Manager NOTE After reinstalling the File Server Resource Manager the PowerVault NX1950 Management Console shows two similar consoles To work around this issue use the Disk Management console to create volumes manually or wait for a few seconds for the used drive letter to be removed from the Storage Manager for SANs console To avoid this issue use the Share and Storage Manager console to delete the volume To work around this issue set the password on the storage array using the SMReg tool LUN www IVdsDisk QueryExtents System Runtime InteropServices COMException HRESULT 0x80042444 Exception from Files to include and Files to exclude in the Files Group Properties window have the same file extensions In the Files Group Properties window the Files to include and Files to exclude lists may have the same file extensions BERemote exe terminates unexpectedly while protecting servers running Windows Unified Data Storage Server 2003 x64 operating system with Backup Exec 10 x for Microsoft Windows Server operating systems BERemote exe terminates unexpectedly while protecting Windows Unified Data Storage Server 2003 x64 operating system with Backup Exec 10 x for Windows Server operating systems Removing a node from a cluster When you delete a server group entry i

Download Pdf Manuals

image

Related Search

Related Contents

YP900A Delphi Combustion Efficiency Panel    Manual SIGTB  %JTIXBTIFS  Print WFIL2.1 rev B  取扱説明書  VPL-HW30ES  BioPilot™ Column Mono Q™ 60/100  Con    

Copyright © All rights reserved.
Failed to retrieve file