Dakota Digital LAT-NR362 User's Manual
Contents
1. with the 6 lens mounting screws 16 Push the body seal back into tail light housing 17 Reinstall tail light housing in vehicle 18 Reinstall trim pieces through housing and vehicle and secure with trim nuts 19 Push and turn the bulb base plug into the bulb socket 20 Work the LED assembly wires back into the tail light housing and insert bulb socket back into housing 21 Repeat for the other tail light 22 Test the tail lights brake lights and turn signals If the turn signals do not flash you will need to upgrade your flasher If you are replacing only the rear turn signals you should be able to use a heavy duty electronic flasher from your local parts store If you are replacing both front and rear or do not have front bulbs you will need a no load flasher Dakota Digital part number LAT NLF SERVICE AND REPAIR DAKOTA DIGITAL offers complete service and repair of its product line In addition technical consultation is available to help you work through any questions or problems you may be having installing one of our units Should you ever need to send the unit back for repairs please package the product in a good quality box along with plenty of packing material Ship the product by UPS or insured Parcel Post Be sure to include a complete description of the problem your full name and address street address preferred and a telephone number where you can be reached during the day An authorization number for products being returned f2. INSTALLATION INSTRUCTIONS Id F LAT NR362 Dakota Di ita LED Tail Lights for 1967 1968 Mustang MAN 650205 Kit Includes Installation 1 Remove light bulb socket from the back of the tail light housing 2 Remove the light bulb from socket 3 Remove 6 nuts from the trim studs that secure the tail light housing 4 Pull the trim pieces out of tail light housing from the rear of vehicle 5 Remove tail light housing from vehicle 6 Pull the body seal out of the tail light housing up over the lens Remove the 6 lens mounting screws Remove the lens from the housing Loosen the lens seal from the housing by gently pulling the seal away from the housing co NI 10 Clean dirt and rust from the seal surface of the housing Now is a good time to clean and inspect the lenses also If the lenses are in bad shape a replacement set is recommended MAN 650205 11 Push the bulb base plug and wire from the LED assembly through the light bulb hole in the back of the tail light housing 12 While working the wire harness through the light bulb opening place the LED assembly into the housing The mounting plate is marked with up arrows that should point to the top of the tail light housing when the LED assembly is installed correctly 13 Place the lens seal over the LED assembly making sure the holes in the seal line up with the holes in the housing 14 Place the lens into the housing 15 Secure lens and LED assembly
3. THIN A PERIOD OF 30 MONTHS FROM DATE OF ORIGINAL PURCHASE IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY EXPRESSED OR IMPLIED WHATSOEVER No person or representative is authorized to assume for the Company any liability other that expressed herein in connection with the sale of this product FOR SERVICE SEND TO DAKOTA DIGITAL 4510 W 61st ST N SIOUX FALLS SD 57107 USA 800 852 3228 Email us at techsupport dakotadigital com Copyright 2007 Dakota Digital Inc MAN 650205
4. or repair is needed We will contact you if any repair charges exist Any returns for warranty work must include a copy of the dated invoice or bill of sale LED LIGHTING LIMITED LIFETIME WARRANTY DAKOTA DIGITAL the Company warrants to the ORIGINAL PURCHASER of this LED Lighting product under normal use and condition be proven defective in material or workmanship DURING THE LIFETIME OF THE CAR IN WHICH IT WAS ORIGINALLY INSTALLED such defect s will be repaired or replaced at the Company s option without charge for parts or labor directly related to repairs of the defect s To obtain repair or replacement within the terms of this Warranty the product is to be delivered with proof of warranty coverage e g dated bill of sale specification of defects transportation prepaid to the factory This Warranty is valid for the original purchaser only and may not be transferred This warranty does not cover damage to vehicle electrical system This Warranty does not apply to any product or part thereof which in the opinion of the Company has been damaged through alteration improper installation mishandling misuse neglect or accident This Warranty is in lieu of all other express warranties or liabilities ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABLITY SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABLITY MUST BE BROUGHT WI
Download Pdf Manuals
Related Search