Dakota Digital LAT-NR230 User's Manual
Contents
1. INSTALLATION INSTRUCTIONS a Dakota Digital 37 LED Tail Lights for 1960 1972 Chevy Fleetside Pickup MAN 650188 Kit Includes X d La Installation 1 Remove the two screws and tail light lens 2 Remove the light bulb 3 Push and twist to remove the plastic wire socket from the back side of the housing 4 Nowisa good time to clean the lens and housing If lenses are in bad shape a new set is recommended 5 Remove the nut and round metal spacer from the back of the new LED assembly T MAN 650188 6 Insert the new LED assembly through the hole where the original bulb and connector were Use caution when feeding the wires through to avoid damaging the wire insulation 7 Feed the wires through the round metal spacer with one wire going through each outer hole in the aluminum spacer The larger diameter ring should be away from the tail light housing Use caution when feeding the wires through to avoid damaging the wire insulation lm 8 Secure the metal spacer with the supplied 6 nut 9 Place the original lens gasket into place and replace the tail light lens Tighten the screws down carefully MAN 650188 10 Cut off the existing light socket as it will not be used Do not strip the wires Trim the wires from LED assembly to appropriate length once mounted making sure wires are routed cleanly and securely 11 Use the supplied moisture resistant pigtail connectors to attach the wires f2. TA DIGITAL offers complete service and repair of its product line In addition technical consultation is available to help you work through any questions or problems you may be having installing one of our units Should you ever need to send the unit back for repairs please package the product in a good quality box along with plenty of packing material Ship the product by UPS or insured Parcel Post Be sure to include a complete description of the problem your full name and address street address preferred and a telephone number where you can be reached during the day An authorization number for products being returned for repair is needed We will contact you if any repair charges exist Any returns for warranty work must include a copy of the dated invoice or bill of sale LED LIGHTING LIMITED LIFETIME WARRANTY DAKOTA DIGITAL the Company warrants to the ORIGINAL PURCHASER of this LED Lighting product under normal use and condition be proven defective in material or workmanship DURING THE LIFETIME OF THE CAR IN WHICH IT WAS ORIGINALLY INSTALLED such defect s will be repaired or replaced at the Company s option without charge for parts or labor directly related to repairs of the defect s To obtain repair or replacement within the terms of this Warranty the product is to be delivered with proof of warranty coverage e g dated bill of sale specification of defects transportation prepaid to the factory This Warranty is valid for the origi
3. nal purchaser only and may not be transferred This warranty does not cover damage to vehicle electrical system This Warranty does not apply to any product or part thereof which in the opinion of the Company has been damaged through alteration improper installation mishandling misuse neglect or accident This Warranty is in lieu of all other express warranties or liabilities ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABLITY SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABLITY MUST BE BROUGHT WITHIN A PERIOD OF 30 MONTHS FROM DATE OF ORIGINAL PURCHASE IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY EXPRESSED OR IMPLIED WHATSOEVER No person or representative is authorized to assume for the Company any liability other that expressed herein in connection with the sale of this product FOR SERVICE SEND TO DAKOTA DIGITAL 4510 W 61st ST N SIOUX FALLS SD 57107 USA 800 852 3228 Email us at techsupport dakotadigital com MAN 650188
4. rom the new LED assembly to the existing vehicle harness Insert appropriate wire from vehicle harness and mating LED assembly wire into a connector and crimp following instructions below For the best connection soldering is recommended But to simplify installation the supplied connectors will provide a fast weather resistant connection The correct crimp method for the supplied connectors is 1 Insert UNSTRIPPED wires into the connector and ensure they are all they way in by observing the clear bottom of the connector to see the wires are touching the end 2 Use pliers to push the blue cap down flush with the edge of the clear body completing the connection The connection will only be correct if pressed firmly down with pliers Attach to metal bolt or screw for Ground connection GREEN wire BROWN wire from LED from LED assembly assembly Turn Signal wire Tail Light wire satis wie from vehicle from vehicle sri harness harness y Ground Black Chassis or body 12 Repeat for the other side 13 Test the tail lights brake lights and turn signals If the turn signals do not flash you will need to upgrade your flasher If you are replacing only the rear turn signals you should be able to use a heavy duty electronic flasher from your local parts store If you are replacing both front and rear or do not have front bulbs you will need a no load flasher Dakota Digital part number LAT NLF SERVICE AND REPAIR DAKO
Download Pdf Manuals
Related Search