Dakota Digital LAT-NR181 User's Manual
Contents
1. C E a INSTALLATION INSTRUCTIONS Dakota Dig Ita o for 1972 Impala MAN 650246 Kit Includes Installation 1 Remove the tail light housing from the vehicle 2 Remove the tail light lens 3 Remove the light bulb 4 Remove the original bulb connector from the back side of the housing 5 Now is a good time to clean the lens and housing If lenses are in bad shape a new Set is recommended 6 Remove the nuts and back plate from the back of the new LED assembly MAN 650246 7 Insert the new LED assembly into the hole where the original bulb and connector were located Use caution when feeding the wires through the socket opening to avoid damaging the wire insulation 8 Feed the wires through the large hole in the back plate Guide the back plate onto the back side of the housing The flat side of the mounting disk should be toward the outside and the side with the slight raised center should go in towards the housing This will align the mount in the original housing 9 Secure the back plate with the supplied 6 nuts MAN 650246 11 Cut off the existing light socket as it will not be used Do not strip the wires Trim the wires from LED assembly to appropriate length once mounted making sure wires are routed cleanly and securely 12 Use the supplied moisture resistant pigtail connectors to attach the wires from the new LED assembly to the existing vehicle harness Insert appropriate wire from vehicl2. ND REPAIR DAKOTA DIGITAL offers complete service and repair of its product line In addition technical consultation is available to help you work through any questions or problems you may be having installing one of our units Should you ever need to send the unit back for repairs please package the product in a good quality box along with plenty of packing material Ship the product by UPS or insured Parcel Post Be sure to include a complete description of the problem your full name and address street address preferred and a telephone number where you can be reached during the day An authorization number for products being returned for repair is needed We will contact you if any repair charges exist Any returns for warranty work must include a copy of the dated invoice or bill of sale LED LIGHTING LIMITED LIFETIME WARRANTY DAKOTA DIGITAL the Company warrants to the ORIGINAL PURCHASER of this LED Lighting product under normal use and condition be proven defective in material or workmanship DURING THE LIFETIME OF THE CAR IN WHICH IT WAS ORIGINALLY INSTALLED such defect s will be repaired or replaced at the Company s option without charge for parts or labor directly related to repairs of the defect s To obtain repair or replacement within the terms of this Warranty the product is to be delivered with proof of warranty coverage e g dated bill of sale specification of defects transportation prepaid to the factory This Warranty is vali
3. d for the original purchaser only and may not be transferred This warranty does not cover damage to vehicle electrical system This Warranty does not apply to any product or part thereof which in the opinion of the Company has been damaged through alteration improper installation mishandling misuse neglect or accident This Warranty is in lieu of all other express warranties or liabilities ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABLITY SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABLITY MUST BE BROUGHT WITHIN A PERIOD OF 30 MONTHS FROM DATE OF ORIGINAL PURCHASE IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY EXPRESSED OR IMPLIED WHATSOEVER No person or representative is authorized to assume for the Company any liability other that expressed herein in connection with the sale of this product FOR SERVICE SEND TO DAKOTA DIGITAL 4510 W 61st ST N SIOUX FALLS SD 57107 USA 800 852 3228 Email us at techsupport dakotadigital com MAN 650246
4. e harness and mating LED assembly wire into a connector and crimp following instructions below For the best connection soldering is recommended But to simplify installation the supplied connectors will provide a fast weather resistant connection The correct crimp method for the supplied connectors is 1 Insert UNSTRIPPED wires into the connector and ensure they are all they way in by observing the clear bottom of the connector to see the wires are touching the end 2 Use pliers to push the blue cap down flush with the edge of the clear body completing the connection The connection will only be correct if pressed firmly down with pliers GREEN wire BROWN wire BROWN wire BLACK wire BLACK wire from LED from LED from LED from LED from LED assembly assembly assembly assembly assembly SN i J XD GREEN wire from LED assembly Turn Signal wire Tail Light wire Ground wire from vehicle from vehicle from vehicle harness harness harness Tal igh Passenger s Turn Grou 13 Repeat for the other side 14 Test the tail lights brake lights and turn signals If the turn signals do not flash you will need to upgrade your flasher If you are replacing only the rear turn signals you should be able to use a heavy duty electronic flasher from your local parts store If you are replacing both front and rear or do not have front bulbs you will need a no load flasher Dakota Digital part number LAT NLF SERVICE A
Download Pdf Manuals
Related Search