Curtis SRCD-719 User's Manual
Contents
1. Repeat function will only work on CD playback MP3 Disc Playback Same functions as CD play 1 Place the formatted disc after reading TOC Table of Content 2 The player will automatically detect the MP3 formatted disc and lt MP3 gt will be shown on the LCD Display 3 MP3 disc will automatic play To stop playing press STOP button Note It is normal to take longer time for the player to read PM3 disc as the content of MP3 formatted disc is much more than ordinary CD disc Because of non standardlized format definition production of MP3 disc playback quality and performance are not guaranteed If no sound comes out any problem happen when playing MP3 disc you are suggested to remove the MP3 disc and change to ordinary CD disc MP3 MOD Press once at stop mode to activate the ID3 ON to show the MP3 text To switch off this function press once MP3 MOD button during stop mode MP3 SEARCH You may search your favourite songs by type in the relate key word For example you would like to search out the songs with the album Blue Sky from the entire MP3 disc 11 Press the MP3 MOD button to active the ID 3 function when the disc is stop running Press the MP3 ENTER button to show the input display and type in the key word BLUE To erase the previous input letter you may press the MP3 CLEAR button once Press MP3 ENTER button again to finish the input pro2. of the beam from the remote control to the unit Dark walls direct sunlight or very bright light will reduce the sensitivity of the IR sensor Colour You can change the colour on the display by pressing the COLOUR button Blue Green Cyan Red Yellow Purple White You may change to another colour by pressing the COLOUR button again Now your CD micro system is installed and ready for use please refer to the following instructions for correct operation AC Power Operation The CD micro system will be in standby mode when the AC power supply is connected and switched on At the front of the CD micro system or using the remote control press POWER to switch the CD micro system on The LCD display will light up Volume Control WARNING Do not turn off the CD micro system when the volume is set at high level When it is subsequently turned on a sudden blast of sound may damage your hearing and the external speakers The volume level can be adjusted either using the controls on the unit or by the remote control On the unit turn the volume control towards the sign to increase the volume and towards the sign to reduce the volume The volume level will be displayed while adjustments are being made Note The volume control on the unit does not fully rotate you only need to turn the control until it clicks To adjust the volume level using the remote control press the VOLUME butto
3. the desired station The frequency will display on the LCD display Pressing any of the tuning buttons briefly will change the frequency by increment Pressing and holding the button for a couple of seconds will cause the tuner to search for the next radio station Pressing any of the tuning buttons during a search will stop the search FM FM Antenna Fully extend the FM antenna wire and position it to obtain the best FM reception FM Stereo The CD micro system is capable of receiving stereo FM broadcasts When you tuned to a stereo broadcast STEREO will be displayed AM AM Loop Antenna For AM reception broadcasts are picked up through a loop antenna that plugs into the back of the unit The antenna assembly has a fixing system attached that can be folded to form either a stand or wall mounting as shown in the figures opposite The wall mounting has two holes for round head screws These are not supplied Note It is normal for the position of the antenna to be adjusted to achieve the best reception If selecting the wall mounted option ensure that you can receive the radio stations you listen to before fixing As supplied Folded to forma stand Folded for wall mounting Preset Memory Stations Your CD MP3 micro system can store up to 40 preset radio stations 20 FM and 20 AM Once a station is in a preset memory it can be retuned by pressing the REP M UP M DOWN button on the remote control un
4. this means the CD cannot be read by the CD mechanism Refer to the Care maintenance section Playing a CD On CD micro system or remote control 1 Press the play pause button Il The display will show the track number and the elapsed playing time 2 To pause playback press the play pause button gt The elapsed time will hold 3 To resume playback press play pause Il again 4 To stop playback press either STOP on the remote control or STOP on the unit Intro Press INTRO button on the remote control to intro play the first 10 sec of each track of the CD CD R CD RW disc Track Selection Using the remote control 1 Press either the buttons to select the desired track number 2 Press play pause gt to start playing Using the unit controls 1 Press either of the SKIP TUNING buttons to select the desired track number 2 Press PLAY PAUSE to start playing Track Selection During Play Using the remote control 1 During play press either of the buttons to select the desired track number The selected track will automatically start to play Using the unit controls 1 During play press either of the SKIP TUNING buttons to select the desired track number The selected track will automatically start to play Stop Play Press the remote control the unit The display will show the total number of tracks and total playing time Press t
5. SRCD 719 b Va N IY 0000060000 000008000 000 000 000000 INSTRUCTION MANUAL WARNING TO PREVENT FIRE OR SHOCKHAZARD DO NOTUSE THIS PLUG WITHAN EXTENSION CORD RECEPTACLE OR OTHEROUTLET ULESS THE BLADES CAN BE FULLY INSERTED TO PRESENT BLADE EXPOSURE TO PREVENT FIRE OR SHOCKHAZARD DO NOTEXPOSE THISAPPLIANCE TORAIN OR MOISTURE TO PREVENT ELECTRICAL SHOCK MATCH WIDE BLADE PLUGTO WIDE SLOT FULLY l NSERT The lightning flash with arro whead symbol within an equ ilateral triangle is intended to alert the user to the presence of uninsulated dangerous vo Itage within the product s en closure that may be of suffici ent magnitude to constitute a risk of electric shock to perso CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Warning To reduce the risk of electric shock do notremove cover or back no user servic eable parts inside refer servi cing to qualified service pers onnel The exclamation point within an equilateral triangle is int ended to alert the user to the presence of important opera ting and maintenance servi cing instructions in the liter ature accompany ing the ap plicance ns IMPORTANT SAFETY INSTRUCTIONS 1 Read theseinstructions 2 Keep theseinstructions 3 Heed allwarnings 4 Follow allinstructions 5 Do notuse thi
6. apparatus has been exposed tora in or moisture does not operatenormally or has beendropped 15 This appliance shall notbe exposed todripping or splashing water and thatno object filled with liquids suchas vases shallbe placed onapparatus 1 Quick View To get the maximum enjoyment and performance from this product please read this manual and familiarize yourself with the functions and controls before attempting to operate it Correct usage will assure years of trouble free performance and listening pleasure Front View 1 POWER button 8 Phones 2 CD MP3 button 9 CD Door 3 TUNER button 10 EJECT button 4 SKIP REW button 11 VOLUME button 5 SKIP FWD button 12 SENSOR 6 STOP button 13 LCD Display 7 PLAY PAUSE button Remote Control POWER button KEY PAD Track Tune REW button Track Tune Forward button CD MP3 button TUNER BAND button INTRO button PROG button 9 MEMO button 10 ESP button 11 Mode button 12 MP3 Clear button 13 MP3 Enter button 14 COLOUR button 15 Display button 16 M DOWN button 17 RDM button 18 REP M UP button 19 STOP button 20 PLAY PAUSE button 21 TONE button 22 VOL button 23 VOL button 24 MUTE button 25 EJECT button CON Oe Gi GN Getting Started Unpacking your RCD719 MP3 Micro System Carefully remove your CD micro system from its packaging You may wish to store the packaging for future use Box Contents CD MP3 micro sys
7. are not plugged Poor radio reception Ensure aerial is positioned to receive best signal Adjust tuning to improve reception Possible interference from electrical equipment e g Television Reposition product to reduce interference No sound poor sound quality from CD player Ensure CD is correctly loaded label side up Ensure CD is free from dust dirt or scratches CD may require replacement Condensation on optic lens Wait 30 minutes then retry operation CD skipping Ensure CD is free from dust dirt or scratches clean CD Ensure product is not subject to vibration Specification POWER SUPPLY 120V 60Hz Radio FREQUENCY RANGE FM 87 5 108MHz AM 530 1710kHz Laser OPTICAL PICKUP Class 1 Laser Note Specification subject to change without notice 13
8. cess and start searching the MP3 The unit wills automatic search all the root s album s title s and play the song s which relate to the word BLUE Care and Maintenance Compact Disc Care CD Handling When handling CDs Do not touch the recorded surface Do not stick paper or write on either side of the CD not bend the CD CD Storage avoid scratches damage always put CDs back in their cases after use Do not expose CDs to direct sunlight high temperature humidity for long periods Cleaning CDs When cleaning CDs Use soft cloth to wipe fingerprints and dust from the disc surface Wipe in a straight line from the centre to the outside of the disc Small dust particles and light stains will not affect playback Never use benzene thinners record cleaner fluid or antistatic spray to clean CDs Care of the CD Micro system Cleaning Always unplug the product before you clean it Do not use liquid or aerosol cleaners Clean your product with a soft damp not wet cloth Ventilation Do not block or cover ventilation slots Blocking of ventilation slots may lead to overheating of the product Fault Finding Product will not operate Ensure product is connected to the mains supply and switched ON Ensure the POWER button has been pressed No sound Ensure speakers are properly connected Adjust volume level Check headphones
9. he EJECT button to remove the CD from the compartment Programmed Playback Up to 20 tracks can be programmed for playback Using the remote control at CD STOP mode 1 Press the MEMO button MEMORY will show on the display the track number is shown on the left and the program number on the right as below Use the buttons to select the desired track number to be programmed first Press the MEMO button The display will increment the program number Use the buttons to select the track number to be programmed second in the programmed sequence Press the MEMO button Repeat this process until you have entered all of the tracks you wish to play back in the programmed sequence Press PLAY PAUSE to start playback Play back will start with first track selected To stop playback press m Opening the CD door will clear the program Random Play 1 Repeat With the CD loaded press RDM on the remote control The tracks will be played ina random order To cancel random play either press RDM or STOP on the remote control or STOP on the unit Play REP M UP AT PLAY MODE 1 10 Press the REPEAT the remote control to repeat playback of the same track The REPEAT indicator will show on the display To repeat all tracks press M UP REPEAT twice The REPEAT ALL indicator will show on the display To cancel press M UP REPEAT on the unit until the REPEAT indicator extinguishes
10. he back of the unit at the socket marked AM ANT assembly is described in the Radio section Remote Control Setting the Clock The clock can be set by using the MEMO buttons on the remote control When it is on standby Mode Setting the Clock 1 Connect the main plug to a main supply scoket 2 Press and hold the MEMORY button on the remote control until the digit is Flashing 3 Press TONE button the display will show the time with the hours flashing use either of the SKIP buttons to select the hours and press MEMO button the hours stops flashing and set 4 The display will show the time with the minutes flashing Use either of the SKIP buttons to select the minutes and press MEMO button the minutes stops flashing and set The remote control requires 2 x AAA Lithium Battery not included Battery Installation 1 Open the battery compartment cover The clock is now set 2 Insert two AAA batteries not included to match the polarities as indicated inside the battery compartment 3 Close the cover Note When the batteries become too weak the operating distance of the remote controller is greatly reduced and you will need to replace the batteries Operating the remote control Point the remote control at the front of the CD micro system to operate The IR sensor is located below the LCD display The remote control will work up to 7m away from the IR sensor Do not block the path
11. ns Press MUTE on the remote control to mute the sound Press MUTE again to resume sound Note Pressing any of the volume control buttons will also resume sound Headphones Note Reduce the volume to a low level before putting on headphones Adjust volume to a comfortable level A headphones socket is provided for private listening It is located on the front of the unit see page 2 A pair of stereo headphones with a 3 5mm stereo plug is required not included Insert the stereo plug into the socket for headphone use The external speakers are automatically disconnected when headphones are in use TONE Your CD micro system has BASS TREBLE sound effect setting The setting can be selected by pressing the TONE button on the remote a Press TONE 2 times to Bass mode b Press TONE 3 times to Treble mode c Press Vol Up Down button to adjust the Bass Trebel effect ESP To turn ON OFF the ESP function at stop mode for antishock during MP3 playing Operation At the front of the CD micro system or using the remote control press POWER to switch the CD micro system on The LCD display will light up Press either TUNER BAND button on the remote control or the TUNER on the unit to select the radio tuner Tuning Press either TUNER BAND on the remote control or TUNER BAND on the unit to select between FM and AM bands Use the tuning UP DOWN button on the remote control or on the unit to select
12. s apparatus near water 6 Clean onlywith dry cloth 7 Do notblock any ventilation openings Install inaccordance with the manufacturer s instruc tions 8 Do notinstall near any heat sources suchas radiators heatregisters stoves orother app aratus including amplifiers that produce heat 9 Do notdefeat the safety purpose of the polarized or grounding type plug Apolarized plug h as two bladeswith widerthan the other Agrounding type plug has two bladesand a thir d grounding prong The wide blade or the third prong are provided for your safety If the pro vided plug doesnot fit into your outlet consultan electrician forreplacement of the obsolete outlet 10 Protect the power cord frombeing walked onor pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use onlywith the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When cartis used use caution when moving the cart apparatus comb ination to avoidinjury from tip over 331764 13 Unplug this apparatus during lightning storms when unused for long periods of time 14 Refer allservicing to qualified service personnel Servicingis required whenthe apparatus has been damagedin any way such as power supply orplug is damaged liquid has b een spilled orobjects have falleninto the apparatus the
13. tem 2 speakers speaker cables attached Remote control Loop Antenna User Guide AC CONNECTION Plug the power cord into an AC outlet having 120v 60Hz only Connecting this unit to other power sources may damage the unit NOTES The AC polarized plug helps to minimize the possibility of electric shock If the polarized plug does not fit into a nonpolarized AC outlet do not file or cut the wide blade it is the users responsibility to have electrician replace the obsolete outlet The power cord should be unplugged from the outlet when the unit is not going to be used for a long period of time jap AC Outlet Plug Installation Speaker Connection Unwind the cable from each speaker 2 At the rear of the CD micro system there are two speaker sockets 3 Plug the speaker located on the left into the socket marked L and coloured white 4 Plug the speaker located on the right into the socket marked R and coloured red 5 For optimal stereo effect place the speakers approximately 1 5m apart AC Power Connection 1 Connect the mains plug to a mains supply socket and switch on the supply 2 At the front of the CD micro system unit press the STANDBY button 3 The LCD display will light up Antenna The FM antenna is attached to the back of the unit Unwind the wire Positioning is described in the Radio section The AM antenna is a separate loop aerial that plugs into t
14. til the desired preset number is displayed To Preset Stations using the Remote Control 1 Press the Tuning buttons to select the desired frequency Press the MEMO button MEMORY will flash on the display Press the TRACK Tune REW button Forward button until the desired preset memory number is displayed Press the MEMO button to store the frequency into the selected memory location MEMORY will stop flashing and remain on the display The frequency is now preset CD player Use the remote control or from the main unit press CD MP3 to switch the CD micro system on The LCD display will light up Set the function switch to CD The display will initially flash zeros then show no dlsc COMPACT Only use CDs that bear the CD logo DIGITAL AUDIO Loading and Unloading CDs 1 Press the EJECT button to open the CD compartment 2 Press the EJECT button to close the CD door The display will show the total number of tracks and the total playing time The CD door can be opened at any time First press either STOP on the remote control or STOP on the unit then press the EJECT button Please Note Do not place foreign objects into the CD compartment this may damage the mechanism Always keep the CD door shut to prevent dust or dirt from getting into CD mechanism Never place more than one CD into the CD compartment at any time After CD door is closed CD information may not appear on the LCD display
Download Pdf Manuals
Related Search