Cooper Lighting INVUE IMI-508 User's Manual
Contents
1. INVUE VISION WALL VWS VWM INSTALLATION INSTRUCTIONS wire cuarp _ IMPORTANT Read carefully before installing fixture Retain for future reference General Upon receipt of fixture thoroughly inspect for any freight damage which should be brought to the attention of the delivery carrier Compare the catalog description listed on the packing slip with the fixture label on the housing to assure you have received the correct merchandise 2 17 04 IMI 508 Safety This fixture must be wired in accordance with the national electrical code and applicable local codes and ordinance Proper grounding is required to insure personal safety Carefully observe grounding procedure under installation section All work should be done by a qualified electrician WARNING Make certain power is OFF before starting installation or attempting any maintenance 1 Make certain all power is OFF before starting installation Loosen and remove the existing component 4 1 4 20 socket head cap screws 4 teflon washers and 4 o rings RETAIN FOR FUTURE REFERENCE 3 Assembly bag consist of the following a Vision Wall Small VWS 4 1 4 20 lock nuts molded washer bushings 1 4 20 x 1 75 socket head cap screws 1 4 20 flat washer stainless steel ision Wall Medium VWM 1 4 20 lock nuts molded washer bushings 1 4 20 x 2 socket head cap screws 1 4 20 flat washer stainless steel 4 THE DOOR SHOULD NOT BE REMOVED DURING INS2. TALLATION Take all 4 1 4 20 socket head cap screws with washer and insert them into the wire guard then add the 4 molded bushings to the opposite side of the 1 4 20 socket head cap screws SEE FIG 1 Angle the door about 40 inward Then line up the wire guard using the 1 4 20 screws and the 1 4 20 flat washer with the holes in the door and pull the 1 4 20 screws through Next take the 1 4 20 lock nuts and hand tighten to the door Close the door and tighten 4 1 4 20 screws until the door has been secured To remove wire guard reverse steps starting with 7 Fig 1 These instructions do not claim to cover all details or variations in the equipment procedure or process described nor to provide directions for meeting every possible contingency during installation operation or maintenance When additional information is desired to satisfy a problem not covered sufficiently for user s purpose please contact your nearest representative COOPER Lighting Customer First Center 1121 Highway 74 South Peachtree City GA 30269 770 486 4800 FAX 770 486 4801 AVU040291
Download Pdf Manuals
Related Search