Coleman 9392-540 User's Manual
Contents
1. When the poles are attached to the hub and the shelter is partially standing hook the weebing loop into position over the metal bracket illus 4 illus 5 Fully extend each pole by straightening all shock corded pole sections Insert the pin on the pin and ring system at the corner of the SkyDome fabric into the the pole end illus 6 illus 8 Corner Repeat for remaining poles clips Adjust poles to pull the shelter taut and stake down through the fabric loops at the end of pin and ring illus 7 illus 8 Attach corner clips to poles Attach guy lines to fabric guy loops at each corner and stake out illus 8 Doors can be and secured open with toggle and loops illus 8 3 Complete Shelter illus 6 Insert into the pole end illus 4 Screen House clipped to partially assembled frame Completed shelter with guy lines staked out illus 5 Metal bracket K for webbing loop I Stake through stake loop Things You Should Know Never store shelter even for a short period of time without drying it thoroughly and brushing off caked dirt Do not pack stakes or poles inside your shelter Use separate storage bag STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE ITSELF NEVER PULL ON THE SHELTER FABRIC OR STAKE LOOP TO REMOVE STAKE SHELTER POLES SHOULD NOT BE LEFT TELESCOPED TOGETHER DURING STORAGE Do not leave your shelter set up for we2. 14 x10 SkyDome Screenhouse Instructions apply to Part Number 9392 540 ASSEMBLY PARTS When You Are Ready To Set Up Your Shelter Select a level area clear of rocks branches and other hard or sharp objects Do not set up your shelter under trees For easier set up two or more people are recommended Place fabric in center of selected location and assemble above fabric Poles 4 Part No 9392 1201 Hub 1 Part No 9392 1261 Pole Sleeves Hub clipped 1 Pole Assembly p You will need to assemble and connect one pole at a time to the hub Do not completely assemble poles a Beginning at spring clip end of pole assemble all but the last shock corded section The pole and one section should curve downward illus 1 b Locate the center top clip on the fabric and attach it to the Hub illus 1 illus 3 c Starting at the corner Insert the spring clip end of the pole through the webbing loop and then into the Poles inserted through pole sleeve pushing it toward the center webbing loop and illus 1 pole sleeves Webbing Loop Insert the spring clip end into one of the Hub hub ports until it clicks into position M That pole will now partially stand up S illus 2 illus 3 illus 4 e Repeat for each of the three remaining poles illus 3 Mea A oles inserte into hub Illus 3 Poles clipped into position in the hub 2 Attach Shelter to Frame
3. eks at a time be aware that exposure to the ultraviolet rays of the sun can seriously damage material and or cause it to become discolored WARNING Keep all flame and heat sources away from this shelter fabric This shelter meets the flammability requirements of CPAI 84 The fabric will burn if left in continuous contact with any flame source The application of any foreign substance to the shelter fabric may render the flame resistant properties ineffective THE COLEMAN CO INC 3600 N Hydraulic Wichita Kansas 67219 1 800 835 3278 www coleman com MADE IN SRI LANKA PRINTED IN SRI LANKA Rev 11 04
Download Pdf Manuals
Related Search