Coleman 14'x14' User's Manual
Contents
1. end of pole diagonally from starting point and gradually apply pressure to the pole forming an arch until you are able to insert the Pin into pole end Repeat for second pole illus 3 Attach tent frame clips to poles Ring amp Pin System Center poles Side pole illus 4 Center section upright illus 5 srame Cis A Raise Ends of Tent Grommets for rainfly poles Insert one end of the Side Frame Pole onto the Pin amp Ring System Repeat for other Side pole Go to opposite end of pole and Side pole gradually apply pressure until pole arches enough to fit onto pin Attach frame clips illus 6 Assembled tent without rainfly Note the frame clips located on tent Side pole 4 Attach Raintly illus 7 Insert rainfly pole through a pole sleeve on underside of rainfly Assemble Rainfly Poles by a interlocking shock corded poles 4 main guylines attach to Insert rainfly poles into pole fabric loops on rainfly sleeves located at the center edges of the underside of rainfly illus 7 illus 8 Frame attachments located on underside of rainfly Drape rainfly over tent pole side down The Rainfly Poles should be over the doors of the tent Insert the ends of the rainfly poles into the grommets on the tent body Secure rainfly with attachments located on underside of fly Attach S hooks to the fabric i End2. 14x14 3 Room Dome Tent Instructions apply to Part Number 9271 191 When You Are Ready POLE ASSEMBLY PARTS To Set Up Your Tent 2 Center Tent Part No 9271A402 Select a level campsite clear of Poles Black eh erence AA 2 Side Tent Part No 9271405 or sharp objects Poles Grey Do not set up your tent under trees For best results in windy conditions 2 Rainfly Part No 9271A403 position the end of tent into the wind Poles Rainfly Part No 9271A406 T Layout amp Positioning of Tent Pole Assembly Layout and position tent with doors Side pole facing desired direction illus 1 pater poles Stake down tent corners N Side pole using the tent stake loops Keep the floor taut illus 2 Assemble all poles by interlocking shock corded poles Insert the longer Center Frame Poles black into Center Pole Sleeves The poles should cross forming an X in the middle of tent illus 1 Insert the shorter Side Frame Poles grey through the pole sleeves located at the illus 2 Tent stake sides of tent illus 1 through stake loop illus 1 Connect Frame to Tent Unzip doors Side pole Locate the Pin amp Ring Systems on either side of the front doors and the corresponding Pin amp Ring on the back side of tent Insert one end of Frame Pole onto Pin amp Ring System on tent stake loop on either side of the doors illus 3 Go to opposite
3. ing it thoroughly and brushing off caked dirt Do not pack stakes or poles inside your tent Use a separate storage bag STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE ITSELF NEVER PULL ON THE TENT FABRIC OR TENT STAKE LOOP TO REMOVE STAKE TENT POLES SHOULD NOT BE LEFT TELESCOPED TOGETHER DURING STORAGE Seam sealer has not been provided with your tent For additional protection THE COLEMAN CO INC we recommend seam sealing your tent prior to camping Seam sealer may be on purchased through your local retailer or at your local sporting goods store 3600 N Hydraulic e Wichita Kansas 67219 1 800 835 3278 www coleman com PRINTED IN THAILAND Rev 07 04 MADE IN THAILAND
4. loops near frame clips illus 9 guylines Attach guylines to fabric loops SA End guylines ee KY AN AN 4 4 4 4 illus 8 Completed tent with rainfly Note the r 2 guylines on each end and 4 main guylines on rainfly Two at each end over side windows and three on the rainfly Stake out guylines away from the tent at an angle illus 10 illus 10 Stake out tent with adjustable guylines Slide the disc up the rope to tighten guyline illus 9 Things You Should Know Under certain conditions cold weather high humidity etc Do not leave your tent set up for weeks at a time be aware that condensation will form on the inside surfaces of your tent Condensation is exposure to the ultraviolet rays of the sun can seriously damage material caused by water vapor from your breath perspiration or any wet clothing and or cause it to become discolored inside your tent It is NOT LEAKAGE through the tent fabric It can be minimized by removing wet clothing from your tent and by providing good WARNING KEEP ALL FLAME AND HEAT SOURCES ventilation through the tent AWAY FROM THIS TENT FABRIC This tent meets the flammability requirements of CPAI 84 The fabric will burn if left in continuous contact with any flame source The application of any foreign substance to the tent fabric may render the flame resistant properties ineffective Never store tent even for a short period of time without dry
Download Pdf Manuals
Related Search