Code Alarm Automobile Alarm CA 3050 User's Manual
Contents
1. LOD ALARM CA 3050 Owners Manual Your system has many features and available options some of which are selected at time of installation Consult your installing dealer for options that may have been installed and are not listed ARMING THE SYSTEM 1 Turn the engine OFF exit the vehicle and close all doors hood and trunk 2 Press and release the LOCK button of your Factory OEM transmitter one time The parking lights will flash once the siren will chirp once and the dash mounted LED will begin to flash slowly confirming the system is armed NOTE If the siren horn sounds 3 chirps then you have left a door trunk or hood lid ajar Simply close the opened entry point to provide full protection PASSIVE ARMING THE SYSTEM If the passive arming feature has been selected Turn the engine OFF exit the vehicle and close all doors hood and trunk The dash mounted LED will begin to flash rapidly indicating that the 30 second passive arming timer has begun If the LED does not begin to flash rapidly then you have left a door hood or trunk ajar Closing this entry point will allow the arming cycle to begin If any entry point is opened during the 30 second arming cycle arming will be suspended When all entry points are closed the arming cycle will begin again At the end of the 30 seconds the parking lights will flash once the siren will chirp once and the dash mounted LED will begin to flash slowly confir2. 4 times pause etc then an intrusion attempt was made by impact or a strong vibration that the shock sensor detected Check the vehicle for possible damage to the glass or body panels NOTE The LED intrusion warning indications are stored in the system s memory and will be erased when the ignition switch is turned on VALET OVERRIDE SWITCH The valet switch allows you to temporarily bypass all alarm functions eliminating the need to hand your transmitter to parking attendants or garage mechanics When the system is in valet mode all alarm functions are bypassed however the remote panic feature and remote door locks will remain operational Enter the vehicle and turn the ignition key to the ON position Press and hold the valet pushbutton switch until the dash mounted LED turns on solid The system will remain in the valet mode To return to normal operation press and release the push button switch any time the ignition is on NOTE Always remember to return the vehicle to the valet OFF position This will ensure that the vehicle remains protected at all times MANUALLY OVERRIDING YOUR SYSTEM USING THE VALET OVERRIDE SWITCH Your Security system can be disarmed without the use of the OEM transmitter This is necessary since you will need the ability to operate your vehicle if the transmitter is lost or its battery fails To Bypass the system 1 Open the vehicle door The system will sound 2 Turn the ignition key to th
3. OEM transmitter The parking lights will flash 2 times the siren will chirp 2 times and the dash mounted LED will turn off NOTE If the passive arming mode was selected at time of installation the dash mounted LED will start flashing rapidly indicating that the system is rearming Opening any door will suspend the automatic arming If the parking lights flashed 3 times and the siren chirps 4 times this indicates that the alarm system was triggered during your absence Before turning on the ignition key examine the dash mounted LED s flash pattern The number of flashes identifies the triggered zone For additional information refer to INTRUSION WARNING SIGNALS found later in this manual INTRUSION WARNING SIGNAL This system will inform you if an intrusion attempt has occurred while you were away from the vehicle Upon disarm the siren will chirp 4 times and the parking lights will flash 3 times Enter the vehicle and before turning on the ignition switch observe the LED flash pattern If the LED flashes 2 times pause 2 times pause etc then an intrusion attempt was made to open the hood trunk or by an accessory triggering device Check the vehicle for indications of forced entry to these openings If the LED flashes 3 times pause 3 times pause etc then an intrusion attempt was made to the vehicle doors Check all doors for indications of forced entry Page 3 If the LED flashes 4 times pause
4. first be considered a total loss due to theft by your insurance company Your insurance company has settled all claims arising from this theft and there are no other pending legal actions as a result of this theft How to file a request for payment If the above conditions are met make your request for payment by submitting the following to CODE The request for payment must be received by CODE no later than sixty 60 days after the vehicle is reported stolen fi Copy of the retail sales receipt for the purchase of the security system clearing showing the model of system purchased and the year make and model of the vehicle in which the system was installed A copy of the police report for the stolen vehicle A copy of the paid insurance claim and reimbursement check from the insurance company The Theft Protection Program is not available in all states please contact dealer for more information CODE SYSTEMS INC 1 800 421 3209
5. ASH ARM 2 FLASH DISARM 3 FLASH DISARM AFTER INTRUSION CONTINUOUS FLASH TRIGGERED Page 5 CODE ALARM Code Systems Inc Limited Lifetime Warranty Code Systems Inc CODE warrants to the ORIGINAL PURCHASER of this CODE vehicle security product the Product purchased from an authorized CODE dealer that except as provided below should this Product under normal use and conditions be proven defective in material or workmanship DURING THE LIFETIME OF THE VEHICLE IN WHICH IT WAS ORIGINALLY INSTALLED such defect s will be repaired or replaced at CODE s option without charge for parts directly related to repairs of the defect s Switches indicator lights and transmitter cases are similarly warranted to the original purchaser for a period of one 1 year from the date of purchase of the Product CODE accessories sold separately are covered by the applicable warranty accompany ing the accessory This warranty is non transferable non assignable and is voided when 1 the Product is removed from the vehicle in which it was originally installed or 2 the vehicle in which the Product was originally installed is transferred to another party This warranty does not apply to any product damaged by accident physical or electrical abuse improper installation alteration or use contrary to its intended function fire flood or other natural acts In order for the Product to be repaired or rep
6. DE ALARM INC CODE an additional benefit at no additional cost to the purchaser should their vehicle be stolen while protected by a CODE ALARM security system While CODE has created this program as a way of showing appreciation to its customers CODE RE SERVES THE RIGHT TO UNILATERALLY CHANGE ALTER MODIFY OR DISCONTINUE ALL OR PART OF THIS THEFT PROTECTION PROGRAM WITHOUT PRIOR NOTICE THIS THEFT PROTECTION PROGRAM IS NOT AN INSURANCE POLICY AND SHOULD NOT REPLACE AN AUTOMOBILE OR HOMEOWNERS INSURANCE POLICY THIS THEFT PROTECTION PROGRAM DOES NOT COVER LOSSES ARISING FROM THE THEFT OF ITEMS WITHIN THE AUTOMOBILE OR ANY DAMAGES ARISING FROM RELEATED TO AND OR INCIDENTAL OR A CONSEQUENCE OF A VEHICLE THEFT EXCEPT AS SPECIFICALLY DELINEATED BELOW Plan duration 3 Years from the date of installation Plan amount Maximum allowable value equal to insurance deductible or up to 2 500 whichever is less Conditions of the Theft Protection Program The Theft Protection Program is non transferable and non assignable The system must be installed by an authorized CODE dealer Vehicle must be less than three 3 model years old at the time of installation The security system must have been fully armed at the time of the vehicle theft The vehicle in which the system is installed must be insured for theft by a licensed insurance underwriter in the state in which the vehicle is registered Terms of payment The vehicle must
7. e ON position 3 Within 5 seconds press and release the valet pushbutton switch The system will stop sounding and enter the by passed mode You can now start and operate the vehicle normally Typically this override mode is used only if the Factory OEM transmitter has become inoperative Page 4 ELIMINATING RETURNING THE NORMAL ARM DISARM CHIRPS You can selectively eliminate the normal arm amp disarm chirps using the valet override switch following these steps 1 Turn the ignition key ON the OFF Within 10 seconds of turning the ignition key OFF press and release the valet override switch 3 times If before step 1 the chirps were ON then you will hear 2 short chirps which indicates the chirps are turned OFF If before step 1 the chirps were OFF then you will hear 1 short chirp which indicates the chirps are turned ON Whenever the system s power has been disconnected the chirps will be ON when power is reconnected CA 3050 SYSTEM FUNCTIONS AT A GLANCE ALARM DASH LED INDICATORS RAPID FLASHING PASSIVE ARMING SLOW FLASHING ARMED OFF DISARMED ON SOLID VALET MODE 4 FLASH PAUSE INTRUSION SHOCK SENSOR 3 FLASH PAUSE INTRUSION DOOR 2 FLASH PAUSE INTRUSION HOOD OR TRUNK ALARM SIREN CHIRP INDICATION 1 CHIRP ARM 2 CHIRPS DISARMED 3 CHIRPS ARMING WITH ENTRY POINT OPENED 4 CHIRPS 7 DISARM AFTER INTRUSION CONTINUOUS ALARM TRIGGERED ALARM PARKING LAMP INDICATIONS 1 FL
8. laced under the terms of this warranty the defective Product must be returned to an authorized CODE dealer and accompanied by a copy of the retail sales receipt The date of purchase and year make and model of the vehicle in which the Product was originally installed must be clearly indicated on the sales receipt This warranty is exclusive and CODE MAKES NO OTHER WARRANTIES EXPRESSED OR IMPLIED ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MER CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY IN NO CASE SHALL CODE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WAR RANTY EXPRESS OR IMPLIED WHATSOEVER CODE does not warrant that the Product cannot be compromised or circumvented THE EXTENT OF CODE S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND IN NO EVENT SHALL CODE S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE ORIGINAL PURCHASER OF THE PRODUCT WITHOUT INSTALLATION LABOR Some states do not allow the exclusion or limitation of incidental or consequential dam ages so the above limitation may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state CODE SYSTEM INC Theft Protection Program The Theft Protection Program is designed to provide the retail purchaser of a security system provided by CO
9. ming the system is armed PROTECTION WHILE THE SYSTEM IS ARMED Opening any protected entry point hood trunk or doors will cause the alarm to trigger immediately The siren will sound and the parking lights will flash for 30 seconds then stop and continue to monitor all protected entry points If the thief left the door opened the system will sound for six 30 second cycles then shut down isolate the triggered zone and continue to protect all other zones Whenever the system is armed the dash mounted LED will slowly flash This serves as a visual deterrent to a potential thief This LED is a very low current light emitting diode and will not cause the battery to drain even if left unattended for long periods of time Page 2 Whenever the system is triggered the vehicle s parking lights will flash for the full siren sounding period Optional whenever the system is triggered the interior courtesy light will flash for the full siren sounding period Optional whenever the system is armed the vehicle starter circuit is disabled and the vehicle will not start with the ignition key Whenever the system is armed any strong impact to the vehicle will cause the shock sensor to trigger the alarm Any lesser impact will cause the pre detect stage of the shock sensor to emit a few short series of warning tones from the siren DISARMING THE SYSTEM As you approach the vehicle press and release the UNLOCK button on your Factory
Download Pdf Manuals
Related Search