Code Alarm CA 210 User's Manual
Contents
1. LOD ALARM CA 210 Owners Manual 128 6530 1 of 10 Your system has many features and available options some of which are selected at time of installation Consult your installing dealer for options that may have been installed and are not listed LOCKING THE SYSTEM 1 Turn the engine OFF exit the vehicle and close all doors hood and trunk 2 Press and release the LOCK button of your keychain transmitter one time The vehicle s doors will lock the parking lights will flash once the horn will honk once and the dash mounted LED will begin to flash slowly confirming the system is locked If the optional starter inhibit feature is installed the starter inhibit feature will turn on SILENT LOCKING 1 Turn the engine OFF exit the vehicle and close all doors hood and trunk 2 Press and hold both LOCK 8 UNLOCK buttons of your key chain transmitter for 2 seconds The parking lights will flash once and the dash mounted LED will begin to flash slowly confirming the system is locked The horn will not honk If the optional starter inhibit feature is installed it will activate UNLOCKING THE SYSTEM As you approach the vehicle press and release the UNLOCK button on the keychain transmitter The vehicle s doors will unlock the parking lights will flash 2 times the horn will honk 2 times and the dash mounted LED will turn off If the optional starter inhibit feature is installed the starter inhibit feature w2. of purchase of the Product CODE accessories sold separately are covered by the applicable warranty accompany ing the accessory This warranty is non transferable non assignable and is voided when 1 the Product is removed from the vehicle in which it was originally installed or 2 the vehicle in which the Product was originally installed is transferred to another party This warranty does not apply to any product damaged by accident physical or electrical abuse improper installation alteration or use contrary to its intended function fire flood or other natural acts In order for the Product to be repaired or replaced under the terms of this warranty the defective Product must be returned to an authorized CODE dealer and accompanied by a copy ofthe retail sales receipt The date of purchase and year make and model of the vehicle in which the Product was originally installed must be clearly indicated on the sales receipt This warranty is exclusive and CODE MAKES NO OTHER WARRANTIES EXPRESSED OR IMPLIED ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MER CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY IN NO CASE SHALL CODE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WAR RANTY EXPRESS OR IMPLIED WHATSOEVER CODE does not warrant that the Product cannot be compromised or circumvented THE EXTENT OF CODES LIABILI
3. TY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND IN NO EVENT SHALL CODE S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE ORIGINAL PURCHASER OF THE PRODUCT WITHOUT INSTALLATION LABOR Some states do not allow the exclusion or limitation of incidental or consequential dam ages so the above limitation may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state 128 6530 6 of 10 CODE SYSTEMS INC 1 800 421 3209 128 6530 7 of 10
4. ill turn off SILENT UNLOCKING As you approach the vehicle press and hold both LOCK 8 UNLOCK buttons on your key chain transmitter for 2 seconds The parking lights will flash 2 times and the dash mounted LED will turn off confirming that the system is unlocked The horn will not honk If the optional starter inhibit feature is installed it will deactivate Page 2 128 6530 20f 10 VALET SWITCH The valet switch allows you to temporarily bypass the optional starter inhibit feature eliminating the need to hand your transmitter to parking attendants or garage mechanics When the system is in valet mode the optional starter inhibit feature is bypassed however the remote panic feature and remote door locks will remain operational Enter the vehicle and turn the ignition key to the ON position Press and hold the valet push button switch until the dash mounted LED turns on solid The system will remain in the valet mode To return to normal operation press and release the push button switch any time the ignition is on NOTE Always remember to return the vehicle to the valet OFF position This will ensure that the optional starter inhibit feature remains active at all times MANUALLY OVERRIDING YOUR SYSTEM USING THE VALET SWITCH MANUAL OVERRIDE The optional starter inhibit feature can be deactivated without the use of the keychain transmitter This is necessary since you will need the ability to operate your
5. ime the unlock button is pressed the panic feature will continue for the allotted 30 seconds however the vehicle will be unlocked allowing the vehicle to start ADDITIONAL REMOTE FUNCTION CHANNEL 2 The system has an optional feature Channel 2 that can be connected to the Trunk Release To operate channel 2 press and hold the TRUNK button of your keychain transmitter for four seconds Page 4 128 6530 4 of 10 CA 210 SYSTEM FUNCTIONS AT A GLANCE DASH MOUNTED LED INDICATORS SLOW FLASHING LOCKED OFF UNLOCKED ON SOLID VALET MODE ALARM SIREN CHIRP INDICATION 1 HONK LOCK 2 HONK UNLOCK ALARM PARKING LAMP INDICATIONS 1 FLASH LOCK 2 FLASH UNLOCK 2003 Code Systems Inc 128 6530 5 of 10 CODEALARM Code Systems Inc Limited Lifetime Warranty Code Systems Inc CODE warrants to the ORIGINAL PURCHASER of this CODE vehicle security product the Product purchased from an authorized CODE dealer that except as provided below should this Product under normal use and conditions be proven defective in material or workmanship DURING THE LIFETIME OF THE VEHICLE IN WHICH IT WAS ORIGINALLY INSTALLED such defect s will be repaired or replaced at CODE s option without charge for parts directly related to repairs of the defect s Switches indicator lights and transmitter cases are similarly warranted to the original purchaser for a period of one 1 year from the date
6. vehicle if the transmitter is lost or its battery fails 1 Open the vehicle door 2 Turn the ignition key to the ON position 3 Within 5 seconds press and release the valet switch The optional starter inhibit feature will enter the by passed mode You can now start and operate the vehicle normally Typically this override mode is used only if the transmitter has become inoperative Page 3 128 6530 3 of 10 ELIMINATING THE NORMAL ARM DISARM CHIRPS You can selectively eliminate the normal arm amp disarm chirps by holding the transmitter button slightly longer when locking or unlocking This will prevent the horn chirps for one arm or disarm cycle If you find this inconvenient and wish to eliminate these chirps permanently please check with your installation center REMOTE PANIC OPERATION The PANIC button on your keychain transmitter functions as a panic switch for use in emergency situations To use remote panic 1 Press and hold the PANIC button on the keychain transmitter for 3 or more seconds The horn will immediately start honking To stop the honking press and hold the PANIC button on the transmitter again for 3 seconds If the button is not pressed the horn will automatically stop honking after 30 seconds NOTE While in the panic mode pressing and releasing the lock or the unlock buttons will if the option is installed lock and unlock the doors respectively While in the panic mode anyt
Download Pdf Manuals
Related Search