Cobra Electronics MT 725 Owner's Manual
Contents
1. CHANNEL UP CHANNEL DOWN MODE and POWER buttons to prevent accidental operation To Use the Lock Function 1 Press and hold the LOCK button for gain two 2 seconds to turn the Lock On or Off amp A double beep sound is used to confirm your Lock On or Off request When the radio is in Lock Mode the Lock icon will be displayed Display Illumination To Illuminate Your Display 1 Press and release the LIGHT MAX RANGE button to Light Max Range Button illuminate the display for ten 10 seconds mon OPERATION English Auto Squelch Maximum Range Extender Your microTALK radio is equipped with Auto Squelch which automatically shuts off weak transmissions and unwanted noise resulting from terrain conditions or from reaching your maximum range limit You can temporarily turn Off Auto Squelch or turn On Maximum Range Extender allowing all signals to be received and extending the maximum range of your radio To Temporarily Turn Off Auto Squelch 1 Press the LIGHT MAX RANGE button for less than five 5 seconds If you hear two 2 beeps you have turned the Maximum Range Extender On see below To Turn Maximum Range Extender On Light Max Range Button 1 Press and hold the LIGHT MAX RANGE button for at least five 5 seconds until you hear two 2 beeps indicating that the Maximum Range Extender is On To Turn Maximum Range Extender Off 1 Press and release the LIGHT MAX RANGE bu2. and return to LISTENING MODE C Do not press any buttons for fifteen 15 seconds to enter the new setting and return to LISTENING MODE Voice Activated Transmit VOX In VOX Mode your microTALK radio can be used hands free automatically transmitting when you speak You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise To Turn VOX Mode On or Off 1 Press the MODE button until the VOX icon flashes on the display The current On or Off setting is displayed 2 Press the CHANNEL UP or CHANNEL DOWN button to turn VOX On or Off 3 When your desired VOX Mode setting is displayed choose one of the following a Press the MODE button to enter the new setting and proceed to other functions b Press the LOCK button to enter the new setting and return to LISTENING MODE c Do not press any buttons for fifteen 15 seconds to enter the new setting and return to LISTENING MODE Mode Button MODE FUNCTIONS English To Set the VOX Sensitivity Level 1 Press the MODE button until the VOX icon flashes and RCE the current sensitivity level is displayed The current sensitivity level is displayed with the letter L and a number 1 to 5 5 being the most sensitive level and 1 being the least sensitive level uem 2 Press the CHANNEL UP or CHANNEL DOWN button to Rena change the setting 3 When your desired VOX sensitivity level is displayed choo
3. properly A full charge will take approximately three 3 hours You can leave the unit in the charger indefinitely It is recommended that your radio should be turned off while being charged WARNING Only the NiMH battery pack FA BP can be recharged To Recharge the Rechargeable NiMH Battery Pack 1 Attach the POWER SUPPLY to the Attach Power Supply MI Insert Battery Pack charger base and plug it into an Guide s electrical socket 2 Insert BATTERY PACK GUIDE in the radio charging well Battery Pack In Radio Charging Battery Packs Onl 3 Place the rechargeable NiMH BATTERY PACK part No FA BP in the charger base with metal contacts facing rear of charger stand The CHARGE light on the charger base will indicate when the rechargeable NiMH battery pack part No FA BP is inserted into the charger properly A full charge will take approximately three 3 hours You can leave the the battery pack in the charger indefinitely WARNING Only the NiMH battery pack FA BP can be recharged Optional Battery Charging When the NiMH battery pack part No FA BP is used Charge Intercom the battery pack can be charged using the optional rapid fay wall mount charger part No PA CW Simply place the battery pack in the battery compartment open the CHARGE INTERCOM tab on the side of the unit and insert the plug into the charge jack to start charging The batteries should be fully charged in about three
4. 3 hours WARNING Only the NiMH battery pack FA BP can be recharged NOTE See Optional Accessories for accessory availability and ordering instructions OPERATION English Radio Power To Turn Your Radio On 1 Press and hold the POWER button until you hear a Power Button series of audible tones indicating that the radio is On Your microTALK radio is now in LISTENING MODE ready to receive transmissions The radio is always in LISTENING MODE except when the TALK CALL or MODE buttons are pressed To Turn Your Radio Off 1 Press and hold the POWER button Battery Low Indicator Battery power is indicated by the segments appearing at ar the bottom of the display As battery power decreases fewer segments will be visible When the last segment begins to flash the batteries should be replaced or recharged WARNING Only the NiMH battery pack FA BP can be recharged Battery Power Saver If there are no transmissions within ten 10 seconds cm NV TA the unit will automatically switch to Battery Save Mode EX and POWER SAVER will appear in the display This will not affect the unit s ability to receive incoming transmissions Communicating with Another Person To Talk To Another Person 1 Press and hold the TALK button Taik Button 2 With the microphone about 5 cm 2 inches from your mouth speak in a normal voice 3 Release the button when you have f
5. If you press the TALK button while scanning and not within ten 10 seconds of receiving a transmission you will transmit on the channel on which you last received a transmission This will return the radio to LISTENING MODE If you do not press any button within ten 10 seconds your radio will automatically resume scanning channels During Scanning while not receiving a transmission You Can Choose From The Following a Press and hold the TALK button to communicate on either the channel or channel privacy code that was displayed before you entered Mode Functions or the channel on which during scanning you last received a transmission This will return the radio to LISTENING MODE b Press the MODE button to proceed to set CTCSS privacy code on the channel that was either displayed before you entered Mode Functions or on which during scanning you last received a transmission see CTCSS Privacy Code Scan for further details c Press the LOCK button to return to LISTENING MODE on either the channel or channel privacy code that was displayed before you entered Mode Functions or the channel on which during scanning you last transmitted or received CTCSS Privacy Code Scan Your microTALK radio can automatically scan the CTCSS privacy codes 01 to 38 within one 1 channel Select Channel To Scan Privacy Codes 1 While in LISTENING MODE press the CHANNEL UP or CHANNEL DOWN button to choose the channel on which you wish f
6. LK radio includes two 2 rechargeable NiMH battery packs part No FA BP and a two port rapid desktop charger part No PA CD Your two port rapid desktop charger is capable of recharging a One 1 radio with battery pack installed in One Battery Pack amp battery compa rtment and one 1 battery pack One Radio using the included battery pack guide in the radio charging well b Two 2 radios with battery pack installed in battery compartment c Two 2 battery packs using the included battery pack guides in the radio charging wells You should fully charge the included rechargeable NiMH battery packs part No FA BP before using your microTALK radios for the first time NOTE Estimated Operation Time On Full Charge 15 Hours This rechargeable battery must be recycled or disposed of properly in compliance with all applicable laws It must not be thrown away with household rubbish NOTE Do not put batteries into fire or expose to high heat They may explode OPERATION English To Recharge the Rechargeable NiMH Battery Pack In Radio 1 Attach the POWER SUPPLY to the Attach Power Supply charger base and plug it into an electrical socket 2 Place the rechargeable NiMH BATTERY PACK part No FA BP in the battery compartment see Battery Installation TUE 3 Place the RADIO in the charger base Packs In Radios The CHARGE light on the charger base will indicate when the radio is inserted into the charger
7. Pin UK Plug Two Rechargeable NiMH Battery Packs You are not allowed to use channels 1 and 2 in France This situation can change please contact the French radio licensing authority for more information This microTALK radio has been manufactured to meet all required standards for radio equipment using PMR 446 frequencies as authorized The use of this two way radio product involves the public airways and its use may be subject to local laws or regulations Contact your radio licensing authority for more information Caring for Your Radio Your microTALK radio will give you years of trouble free service if cared for properly Here are a few suggestions Handle the radio gently Keep it away from dust Never put the radio in water or in a damp place Avoid exposure to extreme temperatures OPERATION English Battery Installation To Install or Replace Batteries 1 Remove belt dip by releasing belt dip latch and sliding clip Up 2 Pull down on the BATTERY DOOR x LOCK TAB to remove the battery a compartment cover 3 Insert the rechargeable NiMH battery pack part No FA BP according to instructions indicated on battery pack NOTE Four high quality alkaline 4 AAA batteries can also be used Position batteries according to polarity markings 4 Replace Battery Compartment cover and belt clip Cre Battery Pack Charging Desktop Charger Your microTA
8. S miEFoTALK Two Way Radio Model MT 725 External Speaker Antenna Microphone Jack CALL Button MODE Button POWER Button Charge Intercom TAK Button Jock VOLUME CONTROL Buttons LIGHT MAX RANGE Button CHANNEL SELECT Buttons Speaker Microphone CTCSS Privacy Code Numbers Receive Transmit Keystroke Tone Main Channel Number lock Baby Monitor Dual Watch Battery Level Indicator Power Saver OK This equiment is intended for use in Battery Compartment Countries of use Lock Tab Wrist Strap Connection Location PRODUCT FEATURES Product Features English Two Way Radio with up to a 3 km 2 mile range 8 Channels 38 CTCSS Privacy Codes Backlit LCD Display Water Resistant Battery Saver Circuitry Maximum Range Extender e VOX Mode for Hands Free Transmissions VibrAlert Silent Paging Baby Monitor Function Intercom Capability Call Alert 5 Selectable Tones Scan Channel Privacy Code Dual Watch Programmable 2 Location Scan Key Lock Product Information Auto Squelch Selectable On Off Roger Beep Confirmation Tone Selectable On Off Keystroke Tone External Speaker Microphone Jack Belt Clip e Wrist Strap Battery Charge Contacts in Battery Compartment Door Two Port Rapid Desktop Charger with AC Adapter 240V 3
9. To Turn Keystroke Tones On or Off When you turn On your microTALK radio for the first time Keystroke Tones will be On Mode Button 1 Press the MODE button until the Keystroke Tones icon flashes on the display The current ON or OFF setting is displayed 2 Press the CHANNEL UP or CHANNEL DOWN button to turn Keystroke Tones On or Off 3 When your desired Keystroke Tone Mode setting is displayed choose one of the following a Press the MODE button to enter the new setting and return to LISTENING MODE b Press the LOCK button to enter the new setting and return to LISTENING MODE C Do not press any buttons for fifteen 15 seconds to enter the new setting and return to LISTENING MODE Select Keystroke D O C OPTIONAL ACCESSORIES WARRANTY amp CUSTOMER SERVICE English Declaration of Conformity This declaration is the responsibility of the manufacturer importer Cobra Electronics Europe Limited Dungar House Northumberland Avenue Dun Laoghaire County Dublin Ireland Date October 29 2003 This certifies that the following designated product PRIVATE MOBILE RADIO MT 725 Product Identification complies with the essential protection requirements of R amp TTE Directive 1999 5 EC on the approximation of the laws of the Member States relating fo Radio Spectrum Matters EMC and Electrical Safety This declaration applies to all specimens manufactured in accordance with the attached technical documentation describe
10. atically resume scanning CTCSS privacy codes During Scanning while not receiving a transmission You Can Choose From The Following a Press and hold the TALK button to communicate on either the channel or channel privacy code that was displayed before you entered Mode Functions or channel privacy code on which during scanning you last received a transmission This will return the radio to LISTENING MODE b Press the MODE button to proceed to next available Mode Function c Press the LOCK button to return to LISTENING MODE on either the channel or channel privacy code that was displayed before you entered Mode Functions or the channel privacy code on which during scanning you last received a transmission VibrAlert and Call Alert Your microTALK radio can alert you to incoming signals by sounding an audible call tone by vibrating silently or both To Change Call Settings he ne 1 Press the MODE button until the Cw pud Call Setting icon flashes on the display The current setting 01 Gods Vibrate Ring 02 Vibrate bini Only or 00 Ring Only is diii displayed ZU x s 2 Press the CHANNEL UP or X CHANNEL DOWN button to change the call setting Call Alert Icon ut ENS i MODE FUNCTIONS English 3 When your desired call setting is displayed a Press the MODE button to enter the new setting and proceed to other functions b Press the LOCK button
11. d in Annex Il of the Directive which forms part of this declaration Assessment of compliance of the product class 2 6 with the requirements relating to the essential requirements according to Article 3 R amp TTE was based on Annex IV of Directive 1999 5 EC and the following standards Radio Spectrum EN 300 296 2 v 1 1 1 02 01 Identification of regulations standards EMC EN 301 489 5 07 2000 Identification of regulations standards Electrical Safety EN 60065 1998 Identification of regulations standards RF Exposure EN 50371 2002 Identification of regulations standards DUBLIN IRELAND MIKE KAVANAGH Optional Accessories For accessory orders and availability please contact your local dealer PABCI Replacement Belt Clip FABP NiMH Rechargeable Battery Pack PACW Rapid Wall Mount Charger 220 V 2 pin CE plug and 240 V 3 pin UK plug adapter MASM Lapel Speaker Microphone MAVOX VOX Headset Speaker Microphone MAEBM Ear Bud Microphone with Push To Talk Button Warranty amp Customer Service For warranty and customer service information please contact your local dealer C 11770 For use in EU countries subject to local laws and regulations CEEL is a trademark of Cobra Electronics Corporation USA Snake design and microTALK amp are registered trademarks of Cobra Electronics Corporation USA 2003 Cobra Electronics Europe Limited Dungar House Northumber
12. ing through the Mode Functions your radio features will be displayed in the same predetermined order EE Set CTCSS Privacy Codes Set VOX On Off Set VOX Sensitivity Level Set Channel Scan Set CTCSS Privacy Code Scan gt Set VibrAlert and or Call Alert Set Baby Monitor gt Program Dual Watch Location or Set Dual Watch On Off Set Call Tones gt Set Roger Beep On Off set Keystroke Tones On Off MODE FUNCTIONS English CTCSS Privacy Codes CTCSS Continuous Tone Coded Squelch System is an advanced tone coding system allowing you to select one of 38 privacy codes to reduce incoming transmissions from other users on the channel NOTE If you are using a privacy code both radios must be tuned to the same channel and privacy code to communicate Each channel will remember the last privacy code you selected To Select a Privacy Code 1 After selecting a channel press and release the MODE RRS button until the small numbers next to the channel number flash on the display 2 Press the CHANNEL UP or CHANNEL DOWN button to select a privacy code You can press and hold the CHANNEL UP or CHANNEL DOWN button for fast advance through CTCSS privacy code numbers 3 When your desired privacy code is displayed choose one of the following a Press the MODE button to enter the new setting and proceed to other functions Select Privacy Code b Press the LOCK button to enter the new setting
13. inished talking and listen for a response 5 em 2 Inches You cannot receive incoming calls while pressing the TALK Rem button NOTE Both radios must be tuned to the same channel and privacy code to communicate Listening for a Response When You Have Finished Talking 1 Release the TALK button to receive incoming transmissions Your microTALK is always in LISTENING Vez X q MODE except when the TALK CALL or MODE buttons J are pressed ZZA OPERATION English Volume To Adjust the Volume Press the VOLUME UP or the Volume Buttons Volume Level VOLUME DOWN buttons A triple beep sound is used to indicate a al that you have reached the minimum 1 or maximum 8 volume level Call Button To Alert Another Person That You Are Calling 1 Press and release the CALL button Call Button The other person will hear a two 2 second ringing tone You cannot receive transmissions while sending a call NOTE Both radios must be tuned fo the same channel and privacy code to communicate Channels To Select a Channel 1 With the radio on select any of the 8 channels by Channel Buttons pushing the CHANNEL UP or CHANNEL DOWN button You can press and hold the CHANNEL UP or CHANNEL DOWN button for fast advance NOTE Both radios must be tuned to the same channel m and privacy code see CTCSS Privacy Codes to r communicate een Lock Function The LOCK button locks the
14. land Avenue Dun Laoghaire County Dublin Ireland www cobra com
15. lly return to LISTENING MODE on Dual Watch Location 1 MODE FUNCTIONS English To Turn Dual Watch On NOTE Dual Watch Location 2 must be programmed to Select Channel tum Dual Watch on 1 Set the first Dual Watch Location channel privacy code you wish to monitor see Channels and CTCSS Privacy Codes sections for further details 2 Press the MODE button until the Dual Watch icon and the channel number flash on the display NOTE While setting Dual Watch if you do not press any buttons for fifteen 15 seconds your radio will automatically return to LISTENING MODE on the Lock Button last channel or channel privacy code displayed before you entered Mode Functions 3 Press the LOCK button to engage DUAL WATCH MODE During An Incoming Transmission You Can Choose From The Following a Press and hold the TALK button to communicate on that Dual Watch Location Your radio will remain on that Dual Watch Location and return to LISTENING MODE b Press the CHANNEL UP or CHANNEL DOWN button to resume Dual Mode Button Watch If you press the TALK button while in Dual Watch and not within ten 10 seconds of receiving a transmission you will transmit on the last Dual Watch Location on which you received a transmission This will return the radio to LISTENING MODE If you do not press any button within ten 10 seconds your radio will automatically resume Dual Watch During Dual Watch while not receiving a trans
16. mission You Can Choose From The Following a Press and hold the TALK button to communicate on either Dual Watch Location 1 or the last Dual Watch Location on which during Dual Watch you last received a transmission This will return the radio to LISTENING MODE b Press the MODE button to proceed to other functions c Press the LOCK button fo return to LISTENING MODE on either Dual Watch Location 1 or the last Dual Watch Location on which during Dual Watch you last received a transmission MODE FUNCTIONS To terminate Dual Watch 1 Choose one of the following English a Press the LOCK button to return to LISTENING MODE on either Dual Watch Location 1 or the last Dual Watch Location on which during Dual Watch you last received a transmission b Press the TALK button to return to LISTENING MODE on either Dual Watch Location 1 or the last Dual Watch Location on which during Dual Watch you last received a transmission c Press the MODE button and proceed to the next available Mode Function 5 Call Tone Settings You can choose between five 5 different call tone settings to transmit a unique call alert To Change a Call Tone Setting 1 Press the MODE button until the letter C and the current call tone number 1 to 5 is displayed The current call tone will sound for two 2 seconds 2 Press the CHANNEL UP or CHANNEL DOWN button to hear the other call tone settings 3 When your desired call tone
17. o scan the CTCSS privacy codes Mode Button 2 Press the MODE button until the Scan icon and the small numbers next to the channel number flash on the display 3 Press the CHANNEL UP or CHANNEL DOWN button to begin scanning CTCSS privacy codes within the Select Scan Privacy channel you selected The Scan icon will continue to be displayed when CTCSS privacy code scan is On Your radio will continue to scan CTCSS privacy codes and stop as an incoming transmission is detected Your radio will remain on that channel privacy code for ten 10 seconds While setting CTCSS privacy code scan if you do not press any buttons for fiffeen 15 seconds your radio will automatically return to LISTENING MODE on the channel privacy code that was displayed before you entered Mode Functions MODE FUNCTIONS English During An Incoming Transmission You Can Choose From The Following a Press and hold the TALK button to communicate on that channel privacy code Your radio will remain on that channel privacy code and return to LISTENING MODE b Press the CHANNEL UP or CHANNEL DOWN button to resume scanning CTCSS privacy codes If you press the TALK button while scanning and not within ten 10 seconds of receiving a transmission you will transmit on the channel privacy code on which you last received a transmission This will return the radio to LISTENING MODE If you do not press any button within ten 10 seconds your radio will autom
18. se one of the following a Press the MODE button to enter the new setting and proceed to other functions b Press the LOCK button to enter the new setting and return to LISTENING MODE c Do not press any buttons for fifteen 15 seconds to enter the new setting and return to LISTENING MODE Channel Scan Your microTALK radio can automatically scan channels 1 to 8 NOTE The radio ignores specific CTCSS privacy codes while scanning channels To Scan Channels 1 Press the MODE button until the Scan icon and the channel number flash on the display 2 Press the CHANNEL UP or CHANNEL DOWN button to begin scanning channels The Scan icon will continue fo be displayed when channel gener scan is On Your radio will continue to scan all channels Zz and stop if an incoming transmission is detected Your x fuir radio will remain on that channel for ten 10 seconds KB While setting channel scan if you do not press any aS buttons for fifteen 15 seconds your radio will automatically return to LISTENING MODE on the channel or channel privacy code displayed before you entered Mode Functions During An Incoming Transmission You Can Choose From The Following a Press and hold the TALK button to communicate on that channel Your radio will remain on that channel and return to LISTENING MODE b Press the CHANNEL UP or CHANNEL DOWN button to resume scanning channels MODE FUNCTIONS English
19. setting is displayed choose one of the following a Press the MODE button to enter the new setting and proceed to other functions b Press the LOCK button to enter the new setting and return to LISTENING MODE c Do not press any buttons for fifteen 15 seconds to enter the new setting and return to LISTENING MODE Mode Button Call Tone Setting MODE FUNCTIONS English Roger Beep Confirmation Tone Your listener will hear an audible tone when you release the TALK button This alerts the other party that you have finished talking and that it is OK for them to speak To Turn Roger Beep On or Off When you turn On your microTALK radio for the first Mode Button time Roger Beep will be On 1 Press and release the MODE button until the Roger Beep icon flashes on the display The current On or Off setting is displayed 2 Press the CHANNEL UP or CHANNEL DOWN button to select Roger Beep On or Off 3 When your desired Roger Beep Mode setting is displayed choose one of the following a Press the MODE button to enter the new setting and proceed to other functions b Press the LOCK button to enter the new setting and return to LISTENING MODE C Do not press any buttons for fifteen 15 seconds to enter the new setting and return to LISTENING MODE Select Roger Beep Keystroke Tones With Keystroke Tones turned On your radio will sound beeps each time you press button or change a setting
20. the next available Mode Function Channel Buttons MODE FUNCTIONS English Dual Watch Dual Watch allows you to simultaneously monitor any two 2 Dual Watch Locations Dual Watch Location 1 is always the channel privacy code displayed before you entered Mode Functions See Channels and CTCSS Privacy Codes sections for further details Dual Watch Location 2 will be stored in the radio It can be edited and or recalled for future engagements of Dual Watch Mode To Program Or Edit Dual Watch Location 2 And Engage Dual Watch Mode 1 Press the MODE button until the Dual Watch icon and CE the channel number flash on the display 2 Choose one of the following a Select or edit a channel 1 Press the CHANNEL UP or CHANNEL DOWN button to select a channel 1 to 8 b Select or edit a channel privacy code 1 Press the CHANNEL UP or CHANNEL DOWN button to select a channel 1 to 8 2 Press the MODE button to set the channel The small numbers next to the channel number will flash on the display 3 Press the CHANNEL UP or CHANNEL DOWN button to select a CTCSS privacy code 00 to 38 3 Press the LOCK button to set Dual Watch Location 2 and engage DUAL WATCH MODE see below for further details NOTES To terminate Dual Watch and proceed to the next available Mode Function press the MODE button While setting Dual Watch Location 2 if you do not press any buttons for fifteen 15 seconds your radio will automatica
21. to enter the new setting and return to LISTENING MODE c Do not press any buttons for fifteen 15 seconds to enter the new setting and return to LISTENING MODE Baby Monitor With the Baby Monitor Function on a radio left near a baby will transmit to another unit on the same channel and privacy code whenever a sound is detected Baby Monitor uses the same sensitivity level you set for the VOX Function If you have not set a VOX sensitivity level see the Voice Activated Transmit VOX section of this manual the maximum sensitivity level 5 will automatically be used To Turn Baby Monitor On 1 Press MODE button until the Baby Monitor icon flashes EAT on the display The current Off setting is displayed 2 Press the CHANNEL UP or CHANNEL DOWN button to change the setting to On 3 Press the LOCK button to enter the On setting and Select Baby Monitor enter BABY MONITOR MODE NOTES Pressing the MODE button will enter the Baby Monitor Mode setting as Off and proceed to other Mode Functions Not pressing any buttons for fifteen 15 seconds will enter the Baby Monitor Mode setting as Oft and return the radio to LISTENING MODE NOTE Both radios must be tuned fo the same channel RES and privacy code to communicate To Terminate Baby Monitor Mode 1 Choose one of the following a Press the TALK button and return to LISTENING MODE b Press the LOCK button and return to LISTENING MODE c Press the MODE button and proceed to
22. tton or change channels microTALK Range Your microTALK radio has a range of up to three 3 kilometres 2 miles Your range will vary depending on terrain and conditions In flat open country your radio will operate at maximum range Buildings and foliage in the path of the signal can reduce the range Dense foliage and hilly terrain will further reduce the signal Remember you can achieve maximum range by using Maximum Range Extender See above for details Maximum Range Reduced Range Reduced Range OPERATION and MODE FUNCTIONS English External Speaker Microphone Jack Your microTALK radio can be fitted with an optional Exturnal Spock external speaker microphone not included freeing your item hands for other tasks NOTE See Optional Accessories for accessory availability and ordering instructions To Attach the External Speaker Microphone 1 Open the SPKR MIC tab on top of the radio 2 Insert the plug into the SPKR MIC jack Intercom With the optional intercom adapter and two external Intercom speaker microphone attachments a single microTALK 5 radio can be used as an intercom system Ideal for motorcyclists Contact your local dealer for availability and pricing Scrolling Through the Mode Functions By scrolling through the Mode Functions you will be able to select or change preferred features of your microTALK radio While you are scroll
Download Pdf Manuals
Related Search