Clarion DB165 User's Manual
Contents
1. button e Switch the band or seek tuning or manual tuning while in the radio mode Play a first track while in the CD mode SRC button Press the button to turn on the power Press and hold the button for 1 second or longer to turn off the power Switches the operation mode among the radio and CD mode PII button Play or pause a CD while in the CD mode e Perform preset scan while in the radio mode When the button is pressed and held for 2 seconds or longer auto store is performed A M button Use the button to switch to the audio mode bass treble balance fader 4 gt gt I buttons Select a station while in the radio mode or select a track when listening to a CD These buttons are used to make various settings e Press and hold the button for 1 second or longer to switch the fast forward fast backward while in the CD mode 4 PRECAUTIONS 1 When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible If moisture forms on the disc wipe it off with a soft cloth If moisture forms on the optical parts of the player do not use the player for about one hour The condensation will disappear naturally allowing normal operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of th2. button operation is shown for about 30 seconds and the display returns to the screen saver display The factory default setting is on 1 Press and hold the D button for 1 second or longer to switch to the adjustment selection display 2 Press the M4 or Pl button to select SCRN SVR 3 Turn the ROTARY knob to select the setting Each time you turn the ROTARY knob the setting changes in the following order SS OFF gt SS ON 4 Press the D button to return to the previous mode Setting the Clock 1 Press and hold the D button for 1 second or longer to switch to the adjustment selection display 2 Press the M4 or PPI button to select CLOCK lt E gt 3 Press the P button 4 Press the Hd or gt gt button to select the hour or the minute 5 Turn the ROTARY knob to set the correct time The clock is displayed in 12 hour format 6 Press the Pl button to store the time into memory 7 Press the D button to return to the previous mode Note If you select another operation mode while you are setting the clock the clock setting operation will be canceled If you remove the vehicle s battery for a check or repair the clock will be reset so you must set it again Illumination dimmer function When the illumination line of this unit is connected with the car side illumination signal line the display illumination of this unit dims in connection with turn
3. 3 Note Specifications and design are subject to change without notice for further improvement Audio Maximum Power Output 180 VV 45 VV X 4 ch Bass Control Action 100 Hz 14 dB Treble Control Action 10 kHz 14 dB Line Output Level CD 1 kHz 1 7 V General Power Supply Voltage 14 4 V DC 10 8 to 15 6 V allowable negative ground Current Consumption Less than 15A Speaker Impedance 4 Q 4 Q to 8 Q allowable Weight Source unit 2 42 Ib 1 1 kg Dimensions Source unit 7 Width X 1 15 16 Height X 6 1 8 Depth 178 W X 50 H X 155 D mm Power Output 19 W RMS x 4 Channels at 4 Q and 1 THD N Signal to Noise Ratio 80 dBA reference 1 W into 4 Q 8 IN CASE OF DIFFICULTY Problem Power does not turn on No sound is pro duced Fuse is blown Measure Replace with a fuse of the same amperage If the fuse blows again consult your store of purchase Incorrect wiring Consult your store of purchase Nothing happens when buttons are pressed Display is not accu rate The microprocessor has malfunctioned due to noise etc Turn off the power then press the RELEASE button and remove the DCP Press the reset button for about 2 seconds with a thin rod Reset button DCP or main unit connec tors are dirty Wipe the dirt off with a soft cloth moistened with cleaning alcohol Compact disc cannot be loaded Another compact disc
4. CONTROLES Source unit Appaeil pilote Unidad fuente IROTARYI CD SLOT 2 DIRECT RELEASE Z ISR Ard E to w Td eee gt gt I clarion RDM lt lt Lol BND Display Items Rubriques d affichage temes de visualizaci n Operation status indication Frequency clock Indication de l tat de fonctionnement la fr quence horloge Indicaci n del estado de operaci n la frecuencia reloj Z Enhancer indication Indication de Z Enhancer Indicaci n de reforzador Z mejorado Z Enhancer Preset channel indication 1 to 6 Indication de canal pr r gl 1 6 Indicaci n de canal memorizado MAGNA BASS EXTEND indication Indication MAGNA BASS EXTEND Indicaci n de MAGNA BASS EXTEND 1 a 6 LOY TOA BVT Ba Band bent ant De ST MANU Stereo indication Indication st r o Indicaci n de est reo Manual indication Indication de fonctionnement manuel Indicaci n de manual Random indication Indication de lecture al atoire Indicaci n de reproducci n aleatoria Repeat indication Indication de r p tition Indicaci n de reproducci n repetida Scan indication Indication de balayage Indicaci n de exploraci n Note Be sure to unfold this page and refer to the front diagrams as you read each chapter Remarque Veuillez d p
5. CP 1 Press the SRC button for 1 second or longer to switch off the power 2 Press in the RELEASE button RELEASE button The DCP is unlocked 3 Remove the DCP Attaching the DCP 1 Insert the right side of the DCP into the main unit 2 Insert the left side of the DCP into the main unit ACAUTION The DCP can easily be damaged by shocks After removing it be careful not to drop it or subject it to strong shocks The connector connecting the main unit and the DCP is an extremely important part Be careful not to damage it by pressing on it with fingernails pens screwdrivers etc Main Unit Front DCP Rear Panel DCP connector Main unit connector Note If the DCP is dirty wipe off the dirt with a soft dry cloth only DB165 7 6 OPERATIONS Basic Operations ACAUTION Be sure to lovver the volume before switching off the unit power or the ignition hey The unit remembers its last volume setting If you switch the power off with the volume up when you switch the power back on the sudden loud volume may hurt your hearing and damage the unit Turning on off the power Note Be careful about using this unit for a long time without running the engine If you drain the car s battery too far you may not be able to start the engine and this can reduce the service life of the battery Press the SRC button The illumination and
6. Clarion Owner s manual Mode d emploi Manual de instrucciones DBI65 CD RECEIVER AMPLI TUNER LECTEUR CD RECEPTOR CON REPRODUCTOR DE CD Thank you for purchasing this Clarion product Please read this owner s manual in its entirety before operating this equipment After reading this manual be sure to keep it in a handy place e g glove compartment Check the contents of the enclosed warranty card and keep it carefully with this manual Contents 1 FEATURES 3 0520292 caer oi rio CS AS SS 2 2 CONTROLS a Sait fos linc Rda E A E E A EE dd electe 3 3 NOMENCLATURE crac aa et ainda 4 Names of the Buttons and their Functions 4 4 PRECAUTIONS 5 Handling Compact Discs 6 LODO cintia ELENA vvesevieudeivecsauseresgnausedss 6 5 DOP iii tl dl dea o add 7 6 OPERATIONS da Basic Opera ici taa 8 Radio Operations aiii Aces 9 CD Operations 10 7 SPECIFICATIONS 11 8 IN CASE OF DIFFICULTY ocio A idee SL 12 9 ERROR DISPLAYS H A 05523 A2 I renee clado 12 1 FEATURES e High contrast blue negative display 13 x 8 Digits with screen saver e Z ENHANCER sound customization amp MAGNA BASS EX dynamic bass enhancement Rotary volume control COMPACT DIGITAL AUDIO Be sure to unfold and read the next page Veuillez d plier et vous r f rer a la page suivante Cerci rese de desplegar y de leer la pagina siguiente 2 DB165 2 CONTROLS LES COMMANDES
7. SCN button to start scan play SCN lights in the display 2 To cancel the scan play press the SCN button again SCN goes off from the display and the current track continues to play Repeat play The repeat play continuously plays the current track This function continues automatically until it is cancelled 1 Press the RPT button RPT lights in the display and the current track is repeated 2 To cancel the repeat play press the RPT button again RPT goes off from the display and normal play resumes Random play The random play selects and plays individual tracks on a disc in no particular order This function continues automatically until it is cancelled 1 Press the RDM button RDM lights in the display an individual track is selected randomly and play begins 2 To cancel the random play press the RDM button again RDM goes off from the display and normal play resumes 7 SPECIFICATIONS FM Tuner Frequency Range 87 9 MHz to 107 9 MHz Usable Sensitivity 11 dBf 50dB Quieting Sensitivity 17 dBf Alternate Channel Selectivity 75 dB Stereo Separation 1 kHz 35 dB Frequency Response 3 dB 30 Hz to 15 kHz AM Tuner Frequency Range 530 kHz to 1710 kHz Usable Sensitivity 25 uV CD Player System Compact disc digital audio system Usable Discs Compact disc Frequency Response 1 dB 10 Hz to 20 kHz Dynamic Range 1 kHz 93 dB Harmonic Distortion 0 0
8. display on the unit light up The unit automatically remembers its last operation mode and will automatically switch to display that mode Press and hold the SRC button for 1 second or longer to turn off the power for the unit Po co Selecting a mode 1 Press the SRC button to change the operation mode Each time you press the SRC button the operation mode changes in the follovving order Radio mode CD mode Radio mode Note If the CD mode is selected when no disc is inserted the display shows NO DISC N Adjusting the volume Turning the ROTARY knob clockwise increases the volume turning it counterclockwise decreases the volume The volume level is from 0 minimum to 33 maximum Switching the display Press the D button to select the desired display Each time you press the D button the display switches in the following order Main display Clock display Main display 8 DB165 Note Be sure to read this chapter referring to the front diagrams of chapter 2 CONTROLS on page 3 unfold Setting the Z Enhancer This unit are provided with 3 types of sound tone effects stored in memory Select the one you prefer x The factory default setting is Z EHCR OFF 1 Each time you press the Z button the tone effect changes in the following order Z ENHANCER 1 bass emphasized 3 Z ENHANCER 2 treble emphasized gt Z ENHANCER 3 bas
9. e FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur ina particular installation If this equipment does cause harmful interference to radio reception which can be determined by turning the equipment off and on the user is encouraged to consult the dealer or an experienced radio technician for help MODEL Clarion 12V GROUND AM 530 1710kHz FM 87 9 107 9MHz THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS 1 THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND 2 THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE CLARION CO LTD 50 KAMITODA TODA SHI SAITAMA KEN JAPAN MANUFACTURED SERIAL No Clarion Co Ltd PEL MADE IN 2 Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip 3 This unit uses a precision mechanism Even in the event that trouble arises never open the case disassemble the unit o
10. h any cellophane tape or other glue on it or with peeling off marks If you try to play such a compact disc you may not be able to get it back out of the CD player or it may damage the CD player Roughness LCD Screen Do not use compact discs that have large scratches are misshapen cracked etc Use of such discs may cause misoperation or damage To remove a compact disc from its storage case press down on the center of the case and lift the disc out holding it carefully by the edges Do not use commercially available CD protection sheets or discs equipped with stabilizers etc These may damage the disc or cause breakdown of the internal mechanism Storage Do not expose compact discs to direct sunlight or any heat source Do not expose compact discs to excess humidity or dust Do not expose compact discs to direct heat from heaters Cleaning To remove fingermarks and dust use a soft cloth and wipe in a straight line from the center of the compact disc to the circumference Do not use any solvents such as commercially available cleaners anti static spray or thinner to clean compact discs After using special compact disc cleaner let the compact disc dry off well before playing it In extreme cold the screen movement may slow down and the screen may darken but this is normal The screen will recover when it returns to normal temperature 6 DB165 5 DCP Removing the D
11. ing on the car side illumination Radio Operations Listening to the radio 1 Press the SRC button and select the radio mode The frequency appears in the display 2 Press the BND button and select the radio band Each time the button is pressed the radio reception band changes in the following order F1 FM1 gt F2 FM2 3 F3 FM3 gt AM 3 F1 FM1 3 Press the I or gt gt button to tune in the desired station Seek tuning 1 Press the BND button and select the desired band If MANU is lit in the display press and hold the BND button for 1 second or longer MANU in the display goes off and seek tuning is now available 2 Press the 144 or gt gt button to automatically seek a station When the gt I button is pressed the station is sought in the direction of higher frequencies if the 44 button is pressed the station is sought in the direction of lower frequencies Manual tuning 1 Press the BND button and select the desired band If MANU is not lit in the display press and hold the BND button for 1 second or longer MANU is lit in the display and manual tuning is now available 2 Press the Hd or gt gt button to manually tune in a station Recalling a preset station A total of 24 preset positions 6 FM1 6 FM2 6 FM3 6 AM exist to store individual radio stations in memory Pressing the corresponding DIRECT button recalls the stored rad
12. io frequency automatically 1 Press the BND button and select the desired band 2 Press the corresponding DIRECT button to recall the stored station Press and hold one of the DIRECT buttons for 2 seconds or longer to store that station into preset memory DB165 9 Radio Operations Manual memory 1 Select the desired station with seek tuning manual tuning or preset tuning 2 Press and hold one of the DIRECT buttons for 2 seconds or longer to store the current station into preset memory Auto store Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially If 6 receivable stations cannot be received a previously stored station remains unoverwritten at the memory position 1 Press the BND button and select the desired band 2 Press and hold the Py button for 2 seconds or longer The stations with good reception are stored automatically to the preset channels Preset scan Preset scan receives the stations stored in preset memory in order This function is useful when searching for a desired station in memory 1 Press the P button 2 When a desired station is tuned in press the Pl button again to continue receiving that station Note e Be careful not to press and hold the Py button for 2 seconds or longer otherwise the auto store function is engaged and the unit starts storing stations Instant station recall ISR Instant statio
13. is al ready loaded Eject the compact disc before loading the new one Sound skips or is noi sy Compact disc is dirty Clean the compact disc with a soft cloth Compact disc is heavily scratched or warped Replace with a compact disc with no scratches Sound is bad directly after power is turned on Water droplets may form on the internal lens when the car is parked in a humid place Let dry for about 1 hour with the power on 9 ERROR DISPLAYS If an error occurs one of the following displays is displayed Take the measures described below to eliminate the problem ERROR 2 ACD is caught inside the CD deck and is not ejected This is a failure of CD deck s mechanism and consult your store of purchase ERROR 3 ACD cannot be played due to scratches etc Replace with a non scratched non warped disc If an error display other than the ones described above appears press the reset button If the problem persists turn off the power and consult your store of purchase 12 DB165 Clarion Co Ltd All Rights Reserved Copyright 2005 Clarion Co Ltd Printed in China Imprim en Chine Impreso en China PE 2796B 2005 12 A C 280 8305 00
14. lier cette page et vous r f rer aux sch mas quand vous lisez chaque chapitre Nota Cuando lea los cap tulos despliegue esta p gina y consulte los diagramas 3 DB165 3 NOMENCLATURE Note Be sure to read this chapter referring to the front diagrams of chapter 2 CONTROLS on page 3 unfold Names of the Buttons and their Functions RELEASE button e Press the RELEASE button to unlock the DCP ROTARY knob Adjust the volume by turning the knob clockwise or counterclockwise Use the knob to perform various settings CD SLOT CD insertion slot Z button Use the button to select one of the 3 types of sound characteristics already stored in memory 4 button e Eject a CD when it is loaded into the unit DIRECT buttons e Store a station into memory or recall it directly while in the radio mode ISR button e Recall ISR radio station in memory e Press and hold for 2 seconds or longer Store current station into ISR memory radio mode only RPT button Repeat play while in the CD mode RDM button e Perform random play while in the CD mode SCN bution e Perform scan play for 10 seconds of each track while in the CD mode 4 DB165 M B button e Press the button to switch the MAGNA BASS EXTEND on off D button e Switch the display indication Main display Clock display e Press and hold the button for 1 second or longer to enter the adjust mode BND
15. n recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button The ISR function even operates with the unit in other modes ISR memory 1 Select the station that you wish to store in ISR memory 2 Press and hold the ISR button for 2 seconds or longer Recalling a station with ISR In any mode press the ISR button to turn on the radio function and tune the selected radio station ISR appears in the display Press the ISR button again to return to the previous mode 10 DB165 CD Operations Loading a CD Insert a CD into the centre of the CD SLOT with the labeled side facing up LOADING appears in the display the CD enters into the slot and the play starts For CD 12 cm EN Notes Never insert foreign objects into the CD SLOT If the CD is not inserted easily there may be another CD in the mechanism or the unit may require service compact Discs not bearing the ase mark and CD ROMs cannot be played by this unit e Some CDs recorded in CD R CD RW mode may not be usable Loading 8 cm compact discs No adapter is required to play an 8 cm CD Insert the 8 cm CD into the centre of the insertion slot For single CD 8 cm CD SLOT Listening to a CD already inserted Press the SRC button to select the CD mode Play starts automatically If no CD is loaded in the unit NO DISC appears in the display Pausing play 1 Pre
16. r lubricate the rotating parts ACAUTION USE OF CONTROLS ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER FOR COMPLIANCE COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIPMENT CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL Bottom View of Source Unit DB165 5 Handling Compact Discs OMPACT Use only compact discs bearing the disg mark Do not play heart shaped octagonal or other specially shaped compact discs Some CDs recorded in CD R CD RW mode may not be usable Handling Compared to ordinary music CDs CD R and CD RW discs are both easily affected by high temperature and humidity and some of CD R and CD RW discs may not be played Therefore do not leave them for a long time in the car e New discs may have gajl point pen some roughness around the edges If such discs are used the player may not work or the sound may skip Use a ball point pen or the like Gt to remove any roughness from the edge of the disc Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen Never play a compact disc wit
17. s and treble emphasized Z EHCR OFF no sound effect gt Z ENHANCER 1 Audio Mode Adjustments 1 Press the A M button to select the adjustment mode The mode switches as follows each time the A M button is pressed BASS 3 TREB gt BAL gt FAD gt Previous mode x When the Z Enhancer function is turned on BASS bass and TRE treble cannot be selected 2 Turning the ROTARY knob to adjust the selected audio mode BASS bass Adjustment range 7 to 7 TREB treble Adjustment range 7 to 7 BAL balnce Adjustment range L13 to R 13 FAD fader Adjustment range F12 to R12 3 When the adjustment is complete press the A M button several times until the function mode is reached The display returns to the previous mode 7 seconds after the adjustment Adjusting MAGNA BASS EXTEND The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound adjustment function but emphasizes the deep bass sound area to provide you with a dynamic sound The factory default setting is off 1 Press the M B button to turn on or off the MAGNA BASS EXTEND effect M B EX lights in the display on or off Turning the screen saver function on or off This unit is provided with the screen saver function Basic Operations You can turn on or off this function If the button operation is performed with the screen saver function on the operation display corresponding to the
18. ss the Pl button to pause play PAUSE appears in the display 2 To resume CD play press the Py button again Ejecting a CD 1 Press the 4 to eject the CD Take it out from the ejected position Note If you force a CD into before auto reloading this can damage the CD If a CD 12 cm is left in the ejected position for 15 seconds the CD is automatically reloaded Auto reload 8 cm CDs are not auto reloaded Be sure to remove it when ejected Selecting a track Track up 1 Press the PP button to move ahead to the beginning of the next track 2 Each time you press the bP button the track advances ahead to the beginning of the next track CD Operations Track down 1 Press the 44 button to move back to the beginning of the current track 2 Press the 44 button twice to move to the beginning of the previous track Fast forward fast backward Fast forward Press and hold the PPI button for 1 second or longer Fast backward Press and hold the I button for 1 second or longer Top function The top function resets the CD player to the first track of the disc Press the BND button to play the first track track No 1 on the disc Scan play The scan play locates and plays the first 10 seconds of each track on a disc automatically This function continues on the disc until it is cancelled The scan play is useful when you want to select a desired track 1 Press the
Download Pdf Manuals
Related Search