Chamberlain 953CB User's Manual
Contents
1. CHAMBERLAIN POWER DRIVE Whtspes Drive Model 953CB 3 Button Security Remote Control OWNER S MANUAL For use with Security garage door openers and light controls that have an orange learn button The code A WARNING between the remote control and the receiver changes with each use randomly accessing over a billion new codes aoe INJURY or DEATH from a moving The additional push buttons can also activate other garage e ALWAYS keep remote controls out of reach of children NEVER permit children to operate or play with remote control door openers and or light controls Instructions for programming light products are included with those transmitters accessories e Activate gate or door ONLY when it can be seen clearly is properly adjusted and there are no obstructions to door travel e ALWAYS keep gate or garage door in sight until completely closed NEVER permit anyone to cross path of moving gate or door Instructions Are Described and Illustrated Below To Control the Opener Lights In addition to operating the door you may program the remote to operate the lights 1 With the door closed press and hold the remote button that you want to control the light 2 Press and hold the Light button on the door control 3 Press and hold the Lock button on the door control 4 After the opener lights flash release all buttons Test by pressing the remote push but2. OTHER USER SERVICEABLE PARTS Tested to Comply with FCC Standards FOR HOME OR OFFICE USE Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Replacement Parts 3V2032 Lithium battery ee olip l esa FOR SERVICE DIAL OUR TOLL FREE NUMBER Where manta 1 800 528 9131 Owner s manual Spanish 114A2107SP 2006 Chamberlain Group Inc 114A2107E All Rights Reserved
3. ton The opener lights should turn on or off but the door should not move Uo LJ ep fs 1 Press and release the learn button on the motor unit The learn indicator light will glow steadily for 30 seconds The Remote Control Batteries 2 Within 30 seconds press and hold the button on the hand held remote To prevent possible SERIOUS INJURY or DEATH 3 Release the button when the motor unit e NEVER allow small children near batteries light blinks It has learned the code If o e If battery is swallowed immediately notify doctor light bulbs are not installed two clicks will Q a be heard The lithium batteries should produce To Erase All Codes From Motor Unit Memory power for up to 5 years To replace Z Battery pry open case with visor clip or ot positive To deactivate any unwanted remote first erase all codes screwdriver as shown Insert batteries positive side up Press and hold the learn button on motor Dispose of old batteries properly unit until the learn indicator light goes out approximately 6 seconds All previous codes are now erased Reprogram each remote or keyless entry you wish to use NOTICE To comply with FCC and or Industry Canada IC rules adjustment or modifications of this receiver and or transmitter are prohibited except for changing the code setting or replacing the battery THERE ARE NO
Download Pdf Manuals
Related Search