Casio ANA(6HST-B) User's Manual
Contents
1. 2012 CASIO COMPUTER CO LTD Operation Guide ANA 6HST B e Your watch may differ somewhat from the one shown in the illustration 5139 Stopwatch minute hand Hour hand 24 hour hand Minute hand First click setting day Crown normal position Stopwatch second hand 5162 Stopwatch minute hand Hour hand 24 hour hand Minute hand First click setting day Second click setting time Second hand Day Crown normal position Stopwatch second hand To set the time 5150 5169 Stopwatch minute hand Hour hand Minute hand 24 hour hand D D Second click setting time Second hand Day Crown normal position Stopwatch second hand 5305 Stopwatch minute hand Hour hand 24 hour hand Minute hand S First click r A By N Second hand Day Ne setting day gt gt Second click setting time Crown normal position Stopwatch second hand CASIO Specifications Accuracy at normal temperature 20 seconds a month Stopwatch function Measuring capacity 29 59 Measuring unit 1 second Measuring mode Elapsed time Battery One silver oxide battery Type SR621SW Approximately 2 years on type SR621SW assuming one stopwatch operation 30 min day 1 Pull out the crown to the second click e This causes the second hand to stop 2 Set the hands by rotating the crown Move the minute hand four or five minute2. lapsed read the graduation on the elapsed time bezel which the minute hand points to The elapsed time is indicated e Some water resistant models are equipped with a screw lock crown e With such models you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out Do not pull too forcibly on such crowns e Also note that such watches are not water resistant while their crowns are loosened Be sure to screw the crowns back in as far as they will go after making any setting
3. s past the time you want to set and then back it up to the proper setting 3 Push the crown back in to the normal position to restart timekeeping To set the day 1 Pull out the crown to the first click 2 Set the day by rotating the crown 3 Push the crown back in to the normal position Avoid setting the day between 9 00 p m and 1 00 a m the day display may not change in the following day Using the Stopwatch The stopwatch lets you measure elapsed time up to 29 minutes 59 seconds To measure times with the stopwatch Elapsed time 0 gt A p 0 m A P O Start Stop Re start Stop Clear To adjust the positions of the stopwatch minute hand and stopwatch second hand e This procedure should be performed when the stopwatch minute hand and stopwatch second hand do not return to the zero positions 1 Press to reset the stopwatch 2 Pull out the crown to the second click 3 Press to move the stopwatch second hand forward until it points to the zero position e The stopwatch minute hand is synchronized with the stopwatch second hand 4 Push the crown back in to its normal position e Note that pulling the crown out also stops the timekeeping second hand After performing the above procedure you should also adjust the timekeeping setting E For a watch with an elapsed time bezel Rotate the elapsed time bezel to align the V mark with the minute hand After certain amount of time e
Download Pdf Manuals
Related Search