Canon imagePRESS C800/C700 Owner's Guide
Contents
1. except for the exemptions set in Schedule II of the Rule 14 Chapter 2 Regulation notices Regulation notices RoHS China The Environmental Protection Use Period EPUP applicable for the printing system designated for deliveries to the People s Republic of China is 20 years This EPUP which does not include consumables or expendables does not affect any warranty that is provided for the system and may not be construed or interpreted as a separate guarantee for the printing system ENERGY STARE all countries Canon has joined the ENERGY STAR Programme of the United States Environmental Protection Agency EPA The purpose of the ENERGY STAR program is to promote the manufacturing and marketing of energy efficient equipment thereby potentially reducing combustion related pollution Using the energy management features outlined below prevents unnecessary power consumption which helps to prevent air pollution from electricity generating plants and saves money on your utility bills As an ENERGY STAR Partner Canon has determined that the Canon PRISMAsync iPR C800 Series A1 meets the ENERGY STAR criteria for energy efficiency laid down in the ENERGY STAR Programme Requirements for Imaging Equipment Version 2 0 ENERGY STAR Energy consumption all countries The energy consumption of Imaging Equipment can be determined using the TEC procedure This procedure was developed under the supervision of the Unit2. control products or other products that meet inter national product safety and radio frequency interference standards Only use an attachment cable as specified by the manufacturer Make sure that the machine is placed on a level horizontal surface of sufficient strength Do not place this machine on an unstable or tilted surface Do not place this machine in a location that is subject to lots of vibrations and shocks Do not use flammable sprays liquids or gases near this product because this could cause a fire Ventilation O IMPORTANT Do not block the ventilation openings of the machine Be sure to allow a clearance of 60 mm or more at the back of this machine for the ventilation duct Actions in response to troubles WARNING When a piece of metal water or any other similar foreign matter gets inside the machine immediately turn OFF the power switch and unplug the power cord from the power outlet Then call your authorized service representative Immediately stop using the machine if the machine becomes excessively hot emits smoke or produces unusual odors or noises Immediately turn OFF the power switch and unplug the power cord from the power outlet Then call your authorized service representative Stop using the machine if the machine was dropped or a cover was damaged Immediately turn OFF the power switch and unplug the power cord from the power outlet Then call your authorized service representative CAUTION LC
3. representative Space requirements and operation precautions all countries e The required operating space of this product will be communicated to each customer by the local sales representative during the Site Survey Please refer to the corresponding Safety Data Sheets for specific safety information including the dimensions of the product the recommended room volume and ventilation rate You can download the Safety Data Sheets from the support site of your product at Attp global oce com support Operating environment all countries The environmental requirements for correct operation of the machine are as follows Operating temperature T 10 C 50 F to 32 C 96 F Relative Humidity RH 20 to 90 Deployment area below 2000 m approx 6500 ft altitude and non tropical China WEHT HER 2000M UA FA Translation Can only be safely used at altitudes below 2000 meters approx 6500 feet WERT RR URRE RAED Translation Can only be safely used in non tropical weather 18 Chapter 3 General information Chapter 4 Miscellaneous Online support for your product Online support for your product Downloads User guides printer drivers and other resources can change without prior notice To stay up to date you are advised to download the latest resources from http downloads oce com Before you use your product you must always download the latest safety information for your
4. use the machine safely always pay attention to these cautions IMPORTANT Indicates operational requirements and restrictions Be sure to read these items carefully to operate the machine correctly and avoid damage to the machine or property NOTE Indicates a clarification of an operation or contains additional explanations for a procedure Reading these notes is highly recommended O NOTICE Indicates an operation that must not be performed Read these items carefully and make sure not to perform the described operations 6 Chapter 1 Safety information Safety information all countries Warning and caution indicators machine A A Persons The following indicators are used in the machine to warn the user of possible safety risks WARNING Whenever this label is affixed to parts of the machine that are accessible to the user a remark can be found in the user documentation explaining the potential hazard for which the user is warned or cautioned The user is urged to consult the user documentation in order to understand the safety risk and learn how to avoid damage or injury CAUTION Ignoring this Caution Hot symbol could cause injury to skin see also the Actions in response to troubles section Instructed person This safety manual describes safeguards for the protection of an instructed person Instructed person is the term applied to persons who have been instructed and trained by a skille
5. D display Do not rub press or touch the display surface with hard material because the polarizer at the surface can be easily scratched The LCD module consists of glass Therefore the LCD module can damage when you drop pinch strongly or punch the module When glass breaks be careful that you do not get injured by glass pieces Call Customer Service Moving the machine WARNING Make sure that you disconnect the power cord and other cables before you move the machine Make sure that you check the documentation for the correct machine location before you move the machine Make sure that whenever the machine is moved this is done by properly qualified people who have received adequate instructions Chapter 1 Safety information 9 Safety information all countries General use A WARNING e Do not lean lie or stand on any part of the machine including any unit that can be pulled outward e g paper drawers e Do not touch or ingest fluids from a broken LCD Liquid Crystal Display When clothes or skin come into contact with the fluid immediately clean the clothes and skin with soap or alcohol After eye contact immediately wash the eyes with a washing lotion for at least 15 minutes and consult a physician O IMPORTANT Unplug the product when you will not use it for a long period of time 10 Chapter 1 Safety information Chapter 2 Regulation notices Regulation notices Regulation notices Grounding
6. Finland Fl Norway NO Sweden SE and Denmark DK Fl Laite on liitett v suojakoskettimilla varustettuun pistorasiaan NO Apparatet m tilkoples jordet stikkontact SE Apparaten skall anslutas till jordat uttag DK Apparatets stikprop skal tilsluttes en stikkontakt med jord som giver forbindelse til stikproppens jord Translation The machine must be connected to a grounded power outlet Radio Interference suppression all countries except USA Warning This is a Class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures FCC approval USA This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 ofthe FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the Operator s Manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Use of shielded cables are required to comply with Class A limits in Subpart B of Part 15 of the FCC Rules Do not make any changes or modifications to th
7. Safety guide PRISMAsync IPR C800 Series A1 Copyright All rights reserved No part of this work may be reproduced copied adapted or transmitted in any form or by any means without written permission from Oce Oc makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose Furthermore Oc reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation to notify any person of such revision or changes Edition 2014 04 US Contents Contents Chapter 1 Safety informations es do 5 Safety information all COUNtries iii 6 Chapter 2 Regulation notices uinici a 11 Ee UE ein Be eeler E 12 Chapter 3 General information ee Eee 17 General information een nennen 18 Chapter 4 Miscellaneous Fa 19 Online support for your prodUct ii 20 Contents Chapter 1 Safety information Safety information all countries Safety information all countries Introduction Allthe products have been tested in accordance with the strictest international safety standards Please read the following sections before you connect the machine to the power supply These sections contain important information with regard to the user safety and the prevention of equipment problems Make sure tha
8. be more convenient but it should be noted that this may cause an increase in energy consumption Therefore from an energy preservation point of view longer delay times are not recommended Automatic duplex Using both sides of paper reduces paper costs energy consumption and the amount of paper in the waste disposal process Therefore the Canon PRISMAsync iPR C800 Series A1 is default set for automatic duplex copying and printing Standby Power Federal Energy Management Program all countries e This product meets the following criteria for the United States Federal Energy Management Program FEMP In Standby this product consumes less than 1W 1 After shutting down all systems properly standby mode as defined by FEMP is activated by setting the main switch to 0 This product has a hard off switch This product meets the ENERGY STAR Guidelines for energy efficiency FE 16 Chapter 2 Regulation notices Chapter 3 General information General information General information Caution labels and notations all countries You can find the power marking label at the bottom of the controller If connection to a different mains voltage is required contact Customer Service Do not remove caution labels or caution notations If a label or notation is soiled please clean the label or notation If you cannot make label or notation legible or if the label or notation is damaged please contact your service
9. d person or who are supervised by a skilled person to identify energy sources that may cause pain and to take precautions to avoid unintentional contact with or exposure to those energy sources Disassemble and modification A O WARNING e Do not remove covers and panels which are fixed to the machine Some machines have a high voltage component or a laser beam source inside that could cause an electrical shock or blindness Do not modify this machine because this could cause a fire electrical shock or breakdown If the machine contains a laser the laser beam source could cause blindness Do not carry out maintenance activities for other components and maintenance materials than the components and materials that are mentioned in the user manual To avoid any risk only properly qualified and trained service technicians are allowed to modify the machine IMPORTANT Do not bridge any mechanical or electrical circuit breakers Chapter 1 Safety information 7 Safety information all countries Power cord A WARNING e Do not scratch abrade heat twist bend place a heavy object on or cause any other damage to the power cord The use of a damaged power cord exposed core wire broken wire for example could result in a fire or breakdown If you find any of these conditions immediately turn OFF the power switch and unplug the power cord from the power outlet Then call your authorized service representative e Only
10. e equipment unless otherwise specified in the manual If you make such changes or modifications you could be required to stop operation of the equipment ICES 003 Interference causing equipment Canada only This Class A digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe A est conforme a la norme NMB 003 du Canada VCCI Japan E Class A ITE COWL 77 A MAUMEE CH EREECHEN SRIF n ES CORAZZATE REN gd TENIDOS VCCIA Translation This is a Class A product based on the standard of the VCCI Council If this equipment is used in a domestic environment radio interference may occur In such cases the user may be required to take corrective action 12 Chapter 2 Regulation notices Regulation notices EAC Russia Kazakhstan and Belarus The following information about this product can be found on the rear side ofthe machine e Model number e Mains specifications e Manufacturer Country of origin e Production date lt YYYY MM DD gt EAC Marking Battery labeling EEA and Switzerland e This product contains a battery Please do not remove the battery If the battery needs replacement this should be done only by skilled service technicians who are aware of the removal instructions provided by Canon This product contains a Button Cell s It They is are located in a printed circuit board s that is are essential for the continuous error free funct
11. ed States Environmental Protection Agency TEC stands for Typical Electricity Consumption The TEC value of a product represents the energy consumed in a week under standardized conditions For the Canon PRISMAsync iPR C800 Series A1 the TEC value is listed in the Product Safety Data Sheet In order to limit energy consumption during times of non use the Canon PRISMAsync iPR C800 Series A1 has a Sleep mode during which the power level is reduced The value for the Sleep mode is listed in the Product Safety Data Sheet Power Modes and Delay Times Chapter 2 Regulation notices 15 Regulation notices The energy consumption and efficiency are influenced both by the product technology and by the settings chosen by the user especially the delay times that are selected to enter reduced power states The following delay times have been pre set Operational mode Default Delay Time minutes Low Power 0 minute range 0 30 minutes Sleep 1 minute range 1 240 minutes The modes above are automatically entered after the Default Delay Time has elapsed counting from the moment the last print has been produced These settings are recommended and for most users ensure both ease of use and low energy consumption Between brackets are the minimum and maximum values The Delay Times can be changed Shorter delay times will reduce energy consumption even further but may cause longer recovery times In some cases longer delay times may prove to
12. ioning of the product The button cell s should be removed only by skilled service technicians who are aware of the removal instructions provided by Canon Button cell location Button Cell Capacity Ah Contains the following sub stances if applicable Motherboard 0 22 Ah Lithium CAUTION Canon does not accept any liability for any damage or consequences if the batteries are removed by persons other than Canon service personnel Battery labeling USA This product includes a Lithium battery containing perchlorate material Special handling may apply See http www dtsc ca gov hazardouswaste perchlorate Chapter 2 Regulation notices 13 Regulation notices Battery labeling Taiwan PR i B9 Translation Waste batteries Please recycle End of Life WEEE EEA and Switzerland e This symbol indicates that this product is not to be disposed of with your household waste according to the WEEE Directive 2012 19 EU and your national law This product should be handed over to a designated collection point e g on an authorized one for one basis when you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic equipment EEE Improper handling of this type of waste could have a negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE At the same time your cooperation in the correct disp
13. osal of this product will contribute to the effective usage of natural resources For more information about where you can drop off your waste equipment for recycling please contact your local city office waste authority approved WEEE scheme or your household waste disposal service For more information regarding return and recycling of WEEE products please visit http www canon europe com environment Reference Directive 2012 19 EU End of Life WEEE India This product is not to be disposed of with your household waste according to the e waste Management and Handling Rules 2011 This product should be handed over to a designated collection point e g to an authorized collection site for recycling waste electrical and electronic equipment EEE Improper handling of this type of waste could have a negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE At the same time your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources For more information regarding return and recycling of WEEE products please visit htto vww canon co in environment Also this product complies with the India E waste Rule 2011 and prohibits use of lead mercury hexavalent chromium polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0 1 by weight and 0 01 by weight for Cadmium
14. product make sure that you read and understand all safety information in the manual entitled Safety Guide Support For support information please contact your Canon local representative Find your local contact for support from http www canon com support 20 Chapter 4 Miscellaneous canon CANON INC 30 2 Shimomaruko 3 chome Ohta ku Tokyo 146 8501 Japan CANON U S A INC One Canon Park Melville NY 11747 U S A CANON CANADA INC 6390 Dixie Road Mississauga Ontario L5T 1P7 Canada CANON EUROPA N V Bovenkerkerweg 59 1185 XB Amstelveen The Netherlands See http www canon europe com for details on your regional dealer CANON LATIN AMERICA INC 703 Waterford Way Suite 400 Miami Florida 33126 U S A CANON AUSTRALIA PTY LTD 1 Thomas Holt Drive North Ryde Sydney N S W 2113 Australia CANON CHINA CO LTD 15F Jinbao Building No 89 Jinbao Street Dongcheng District Beijing 100005 China CANON SINGAPORE PTE LTD 1 HarbourFront Avenue 04 01 Keppel Bay Tower Singapore 098632 CANON HONGKONG CO LTD 19 F The Metropolis Tower 10 Metropolis Drive Hunghom Kowloon Hong Kong USRM2 5330 00 CANON INC 2014
15. t you observe the safety rules hereinafter This helps to assure that you can work with the product system safely Make sure that you observe all the precautions mentioned below NOTE Safety Regulations require the product name to be registered In some regions where this product is sold the following commercial name s may be registered as a model number in instead e Canon PRISMAsync PR C800 Series A1 e Canon PRISMAsync PR C800 Series A1 for Canon imagePRESS C700 Canon PRISMAsync iPR C800 Series A1 for Canon imagePRESS C800 Depending on the context the terms system machine and equipment used in the user documentation means the product for which this user documentation is applicable Some parts of the contents of this section may not be applicable to your product Please refer to the corresponding Safety Data Sheets for specific safety information You can download the Safety Data Sheets from the support site of your product at Attp global oce com support Warning and caution indicators manual A The following indicators are used in the manuals to categorize the level of the seriousness of hazard WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly To use the machine safely always pay attention to these warnings CAUTION Indicates a caution concerning operations that may lead to injury to persons if not performed correctly To
16. use the mains connector cable that was supplied with the machine e Do not use any power cable other than the one provided Never use the power cable with any other electrical device Power source A WARNING e Put the power plug directly into a wall socket that has the same configuration as the plug The use of an adapter leads can result in an inadequate power supply If a proper wall outlet is not available ask a qualified electrician to carry out the installation e Do not use a multiple outlet adapter or an extension lead Contact your authorized service representative if an extension lead is required The use of an extension cord may result in fire or electrical shock CH IMPORTANT e Do not connect the machine to a mains voltage that differs from the value as stated on the power marking label Power plug WARNING e For machines that are connected via a wall socket Place the machine close to a wall socket that is easily accessible The power plug is intended to serve as a disconnect device Grounding A WARNING e Connect the power cord to an electrical outlet wall socket that is equipped with a grounding terminal e This equipment has not been designed for connection to an IT power system An IT power system is a voltage network in which the neutral wire is not connected to ground 8 Chapter 1 Safety information Safety information all countries Installation A WARNING We recommend that you only connect copy
Download Pdf Manuals
Related Search