Canon DR-2010M Owner's Manual
Contents
1. 24 APPENOIR u uu L u y sassa 26 Replacing Consumables 26 SPECICATION sssrini aaia a eaii 30 Replacement Parts 31 Introduction Thank you for purchasing the Canon DR 2010M DR 2510M Document Scanner Please read this manual thoroughly before using the scanner to familiarize yourself with its capabilities and to make the most of its many functions After reading this manual store it in a safe place for future reference Symbols Used in This Manual The following symbols are used in this manual to explain procedures restrictions handling precautions and instructions that should be observed for safety Ay warnine Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly To use the machine safely always pay attention to these warnings A caution Indicates a caution concerning operations that may lead to injury to persons or damage to property if not performed correctly To use the machine safely always pay attention to these cautions important Indicates operational requirements and restrictions Be sure to read these items carefully to operate the machine correctly and avoid damage to the machine Hint Indicates a clarification of an operation or contains additional explanations2. The power cord may become damaged if it is often stepped on or if heavy objects are placed on it Continued use of a damaged power cord and AC adapter can lead to an accident such as a fire or electrical shock Do not use the power cord while it is coiled Do not pull directly on the power cord When disconnecting the power cord grasp the plug and remove it from the outlet Keep the area around the power cord clear of objects so that the power cord can be disconnected easily in an emergency Do not use an AC adapter other than the one provided with the scanner Do not use the AC adapter provided with the scanner with other products If you have any questions regarding the power supply contact your local authorized Canon dealer or service representative for further information Moving the Scanner When moving the scanner always hold it with both hands to avoid dropping it The scanner weighs approximately 5 3 Ib 2 4 kg Make sure to disconnect the interface cable and AC adapter before moving the scanner If the scanner is transported with these items connected the plugs and connectors may be damaged Handling A WARNING Note the following precautions whenever using the scanner Failure to do so may result in a fire or electric shock E Never use alcohol benzene paint thinner aerosol sprays or any other highly flammable substance near the scanner E Do not cut damage or modify the power cord Do not
3. lt 3 Slide the retard roller to the right to disconnect the shaft 6 Clip the four mounting hooks on the new document and insert the new roller At this time ensure that the holding guide up through the roller cover and slide the notched end of the roller shaft mates with the shaft in the guide toward the back Front Unit 4 Slide the roller fixing lever to the left so that it fits into the hole at the left side of the retard roller and press the lever down to secure the roller shaft 28 Resetting the Counter 1 ur Q A G N Start Image Capture To start Image Capture click the hard disk icon e g Macintosh HD the Applications folder and then the Image Capture icon Click Browse Devices in the Devices menu Select the scanner you want to use and select the Use TWAIN software check box Click OK Click DR 2510M TWAIN in the Devices menu Click Scan The settings screen for the scanner driver appears Click the information button The Scanner Information dialog box appears eoo Scanner Information Scanner Name DR 2510M Driver Version 0 6 9 0213 Firmware Revision 1 09 Total Scanning Count 250710 Roller count 563 Maintenance 8 Click Maintenance The Maintenance dialog box appears e A A Maintenance Roller count 563 Counter Reset Reset Maximum length for paper size Standard 356 mm Long Document mode 1 000 mm Process
4. Cancel Color mode Select the mode for scanning documents auto color detection color grayscale or black and white binary Page Size Specify the page size of documents Orientation Specify the orientation in which documents are fed into the scanner portrait or landscape 18 Dots per inch Specify the scanning resolution Scanning Side Specify whether to scan only one side of a document or both sides If you select Skip blank page and a blank page is detected within the document while scanning the blank page is skipped Deskew When a document is scanned at an angle the slant is detected and straightened in the scanned image Text orientation recognition The orientation of text in scanned images is detected and the images are rotated to match the orientation of the text Use advanced settings dialog box Open the TWAIN driver settings screen and configure advanced scan conditions For details on the settings in the driver settings screen refer to the Help Click the Help button in the settings screen to open the Help important Certain settings are found in both the TWAIN driver settings screen and the CaptureOnTouch scanner settings If you clear the Use advanced settings dialog box check box after configuring TWAIN driver settings the CaptureOnTouch scanner settings are enabled Select Scan Job Operation Flow Registering Editing Jobs In CaptureOnTouch you can regi
5. y imageFORMULA DR 2010M DR 2510M Reference Guide Mac OS X Please read this manual before operating this scanner After you finish reading this manual store it in a safe place for future reference READ CAREFULLY BEFORE OPENING THE SEALED DISK PACKAGE CANON SOFTWARE LICENSE AGREEMENT IMPORTANT READ THIS AGREEMENT BEFORE OPENING THE SEALED DISK PACKAGE BY OPENING THE SEALED DISK PACKAGE YOU ARE DEEMED TO AGREE TO BE BOUND BY THIS AGREEMENT This legal document is a license agreement between you and CANON ELECTRONICS INC Canon BY OPENING THE SEALED DISK PACKAGE YOU ARE DEEMED TO AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT DO NOT OPEN THE SEALED DISK PACKAGE AND PROMPTLY RETURN THE CANON SCANNER THE DISK PACKAGE CONTAINING SCANNER DRIVER SOFTWARE PROGRAMS AND OR SCANNER UTILITY SOFTWARE PROGRAM PROPRIETARY TO CANON OR ITS LICENSOR THE SOFTWARE AND THE ACCOMPANYING DOCUMENTATION AND OTHER ITEMS TO THE PLACE WHERE YOU OBTAINED THEM FOR A REFUND BEFORE THEY ARE USED OR OPENED OR UNPACKED In consideration of the right to use the SOFTWARE you agree to abide by the terms and conditions of this Agreement 1 GRANT OF LICENSE Canon grants you the personal non exclusive right to use the SOFTWARE only on a single computer You shall need to obtain multiple licenses separately from Canon when you shall install the SOFTWARE on multi
6. AND CANON CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS VERBAL OR WRITTEN AND ANY OTHER COMMUNICATIONS BETWEEN YOU AND CANON RELATING TO THE SUBJECT MATTER HEREOF NO AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORIZED REPRESENTATIVE OF CANON Should you have any questions concerning this Agreement or if you desire to contact Canon for any reason please write to Canon s local affiliate Please read first Setup Guide STEP 2 Slide the document guides to the left and right and open the roller cover e Document 4 CC guides e Items included in this manual are subject to change N Sy without notice AX N x ve Checking the Accessories STEP 1 P If any of the items listed below are missing or damaged contact your local authorized K Canon dealer or service representative N x N Roller cover AS 3 Insert the feeding roller and align the notch on the roller with the shaft on the unit e You must keep the machine s packaging and packing As materials for storing or transporting the machine e lt Feed Roller USB Cable Type A Type B Length 1 8 m Setup Disc Warranty Card U S A and Canada only Registration Card U S A and Canada only Reference Guide this document Third Party Software Presto PageManager The following software is included on the supplied Setup disc Photo
7. E Front View Right Side View Document Feed Tray Open to place documents Document Eject Area Scanned documents are output here Job Buttons These buttons can perform user specified functions assigned with the CaptureOnTouch Power Indicator This indicator lights green when the scanner is turned ON E Front View With the Document Feed Tray and Eject Tray Open Front Unit Open when clearing paper jams and cleaning the scanner OPEN button Use to open the front unit Extension Tray Pull this tray out if the document hangs over the edge of the document eject tray Document Feeder Place the document to scan here Document Guides Adjust these guides to fit the width of the document Document Eject Tray Open this tray when you want to stack output documents the scanner ON and OFF If you set the switch to AUTO the scanner is linked to be automatically turned ON OFF in accordance with the power of the computer supports Hi Speed USB 2 0 to this connector Power Connector Connect the supplied AC adapter to this connector Theft Prevention Hole Kensington Attach a key chain etc here to prevent the scanner from being stolen E Feed Selection Lever Feed Selection Lever Use this lever to change the way documents are fed Push it up to feed documents one at a time page separation mode Push it down to feed documents that are fastened together such as invoices
8. select a job that is already registered the title bar display changes to Job editing Enter the job name 3 Specify the output method 4 Configure the job settings Job editing Job details Job title o utton No 01 Gray PDF J E mail Color PDF Gray PDF 2 Save as file olor JPEG iPhoto inconfigured ured ncon Q d nconfigure File name 20090224134406 _ File name settings File type PDF ww Detail Settings Save in folder ww Save to Picture folder Job settings are configured in the following three tabs 19 Output settings tab Configure settings for the output method The items that appear in this tab differ depending on the Output method selected f Output settings Scanner setting Button assignment Application Browse File name 20090224135410 File name settings File type PDF B Detail Settings Save in folder M Save to Picture folder Scanner setting tab Configure scan conditions Output settings Scannersetting Button assignment Color mode _ Auto Color Detection 4 Page Size Auto size detect HH Orientation Dots per inch 200 dpi B Scanning Side _ Duplex i V Deskew automatically straighten skewed images _ Text orientation recognition _ Use advanced settings dialog box Note Sca
9. Avoid installing the machine in direct sunlight If this is unavoidable use curtains to shade the scanner Avoid locations where a considerable amount of dust accumulates Avoid warm or humid locations such as in the vicinity of a water faucet water heater or humidifier Avoid locations where ammonia gas is emitted Avoid locations near volatile or flammable materials such as alcohol or paint thinner Avoid locations that are subject to vibration Avoid exposing the scanner to rapid changes in temperature If the room in which the scanner is installed is cold but rapidly heated water droplets condensation may form inside the scanner This may result in a noticeable degradation in scanning quality The following conditions are recommended for optimal scanning quality Room temperature 10 C to 32 5 C 50 F to 90 5 F Humidity 20 to 80 RH Avoid installing the scanner near equipment that generates a magnetic field e g speakers televisions or radios AC Adapter Connect only to a power outlet of the rated voltage and power supply frequency 120 V 60 Hz or 220 240 V 50 60 Hz depending on your region Do not connect other electrical equipment to the same power outlet to which the scanner is connected Also when using an extension cord make sure that the extension cord is rated for the current requirements of the scanner Never disassemble or modify the AC adapter as it is dangerous
10. INC ALL RIGHTS RESERVED Table of Contents Setup GUI Coico cee coca A a 2 a u suskass Foldout PIU OCUICHION LL III aaisan 2 Symbols Used in This Manual 2 Manuals for the Scanner a 2 Important Safety Instructions 3 instalation LOGAN OM u 3 AG POE DICT I uuu uuu ae E 3 Moving the Scanner 4 PIANIOWING case uuu uuu mu E T E E A C A 4 O E EE E D E E E E E E E T 5 When sending the scanner for repairs 5 Features of the DR 2010M DR 2510M DocumentiS6anner u LIL u usss 6 Names and Functions Of Parts 8 DOGUIIIWIGBD SP uuu a A Aa 9 Placing DOCUMENIS uuu u u u u u u u u u u u uuu 10 S uppilied SoftWare 0 0s cccssssssccsessssccesnssssensecsseccnesessecenes 12 Scanning with CaptureOnToucqh 13 What is CaptureOnTouch 13 Starting CaptureOn TOUCH 14 SCAND PIS Tessons E 15 Select SCAN JOD esna a kuka s E SE 19 TrouBIesho0tIg uu uuu u u uuu 2 23 Common Problems and Solutions 23 Clearing a Paper Jam
11. Open 11 7 x 19 5 x 9 8 W x D x H 298mm x 490mm x 245mm W x D x H Weight without AC adapter Approximately 5 3 Ib 2 4 kg Power Supply using AC adapter DC 16V 1 0A Power Consumption Scanning Maximum 16 W In the Sleep mode Maximum 1 8 W AC 220 240 V 1 9 W With power switch OFF Maximum 0 5 W Noise Not more than 66 dB Operating Environment Temperature 10 C to 32 5 C 50 F to 90 5 F Humidity 20 to 80 RH AC Adapter 100 to 240 V type Model Number MG1 4315 FCC REGULATIONS For 120 V model Document Scanner Model M11074 M11073 This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio o
12. Size Dots per inch La ha EDLE F Confirm output V Enable continuous scanning Register new job Scanning Side YI Preferences Help Grayscale Auto size detect 200 dpi Simplex Advanced display The document is scanned While scanning is in progress the number of pages scanned is displayed in addition to the scanner settings When all the pages of the document are scanned the scanned images are output according to the registered job settings and the completion screen appears eoo imageFORMULA DR 2510M CaptureOnTouch N N Scan First Se I Select Scan Job ect Scan Job Scan x imageFORMULA Select a button K gt amp a Y D M Assign scanner button 1 to Scan First Return to main screen File saving complete YI Preferences Help Open storage folder Hint e Click Return to main screen to return to the main screen of Select Scan Job e f Save to folder is selected for the output method and you click Open storage folder the folder in which the scanned image files are stored will open Starting Select Scan Job with the Job Buttons Under default settings jobs are pre assigned to the second and third job buttons on the scanner Job button Select Scan Job Color JPEG iPhoto Select Scan Job E mail Color PDF When you press job button 2 or 3 after placing your document in the scan
13. and document management software from NewSoft Technology Presto BizCard Corp f Business card management software from NewSoft Technology Corp Run the following installer from the Setup disc to install 5 Close the roller cover It is properly Run the following installer from the Setup disc to install gt PageManager PM8lnstaller closed when you hear a click gt BizCard BCRinstaller Presto BizCard is a registered trademark of NewSoft Technology Corp Remove the scanner from the box and remove the orange tape and protective sheets Y from the scanner Installing the Feed Roller 2 Lift the roller fixing lever G and slide it to the left Slide the roller fixing lever to the right and insert it into the hole on the left of the feeding roller G Lower the roller fixing lever to secure the shaft of the feeding roller Gently press on the sides of the front unit to close it It is properly closed when you hear a click STEP 3 Installing the Software Before Installation Do not connect the scanner to the computer before installing the software Close all other applications before installing the software When using CaptureOnTouch with a Windows driver refer to the Reference Guide Windows and User Manual that are stored on the Setup disc as PDF files 1 Insert the Setup Disc into the computer s CD ROM drive 2 Click DR 2510M Installer Canon Z imageFORMULA L Clic
14. are registered trademarks of Canon Inc in the United States and may also be trademarks or registered trademarks in other countries e Macintosh and Mac OS are registered trademarks of Apple Inc in the United States and other countries e ENERGY STAR is a U S registered mark e Adobe is the registered trademark of Adobe Systems Incorporated in the United States and or other countries e imageFORMULA is a trademark of CANON ELECTRONICS INC e Other product and company names herein may be the trademarks of their respective owners E Copyright Copyright 2009 by CANON ELECTRONICS INC All rights reserved No part of this publication may be reproduced or transmitted in any form or by any means electronic or mechanical including photocopying and recording or by any information storage or retrieval system without the prior written permission of CANON ELECTRONICS INC E Disclaimers The information in this document is subject to change without notice CANON ELECTRONICS INC MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL EITHER EXPRESS OR IMPLIED EXPECT AS PROVIDED HERE IN INCLUDING WITHOUT LIMITATION THERE OF WARRANTIES AS TO MARKETABILITY MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE OF USE OR NON INFRINGEMENT CANON ELECTRONICS INC SHALL NOT BE LIABLE FOR ANY DIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE OR LOSSES OR EXPENSES RESULTING FROM THE USE OF THIS MATERIAL Copyright 2009 CANON ELECTRONICS
15. comode to Color Detection Page Size Auto size detect amas Scanning Side Dots per inch 200 dpi 4 Duplex iE N Scanning Side Duplex lt a 2 m Deskew automatically straighten skewed images J Text orientation recognition J Use advanced settings dialog box Note Scan with these settings Configure output settings i Output scanned images san A M Assign scanner button 1 to Scan First YT Preferences Help L 1 Place the document in the scanner See p 10 For details on scanner setting items refer to the Help When you are finished configuring click the OK button to close 2 Click the Scan First tab the Scanner setting dialog box eoo imageFORMULA DR 2510M CaptureOnTouch 4 Click the Start button S imageFORMULA Output method Finish eoo R Select Scan Job imageFORMULA DR 2510M CaptureOnTouch Select the output method save as file print etc for scanned images Qe imageFORMULA Q Scan First z x iN Select Scan Job I Color mode Auto Color Detection h Output method Finish Page Size Auto size detect ine Dots per inch 200 dpi nea a Select the output method save as file print etc for scanned images Scanning Sid Dupl T 35 Scanner setting www Color mode Auto Color Detection L Page Size Auto size detect m Dots per inch 200 dpi sa Scanner setting Scanning Side Duplex d __ Enable
16. continuous scannini g Scanner setting __ Enable continuous scanning Start D Mi Assign scanner button 1 to Scan First YI Preferences Help S Ww Assign scanner button 1 to Scan First YI Preferences 2 Help a J The document is scanned While scanning is in progress the number of pages scanned is displayed in addition to the scanner settings When scanning is finished the Output method screen appears in the main window 15 The name of the output button differs depending on the selected 5 Specify the output method output method If you select Save to folder for the output method eoo imageFORMULA DR 2510M CaptureOnTouch for example the output button appears as Save e SZ imagerormura The completion screen appears after the scanned images are Scan First W Select Scan Job output This completes Scan First scanning Finish Select an output method eoo imageFORMULA DR 2510M CaptureOnTouch Save to folder a Q Z imageFORMULA Scan First ERE 1g Select Scan Job Attach to E mail Select a button Print Send to application File saving complete K lt 12 A G ah Cancel VA inner but an First gt r Help I lt gt We A E al Return to main screen Open storage folder Sy M Assign scanner button 1 to Scan First YI Preferences 2 Help 6 Configure settings for the output method and click the output button to
17. for a procedure Reading these notes is highly recommended Manuals for the Scanner Documentation for this scanner consists of the following manuals Please read these manuals thoroughly before using the scanner to familiarize yourself with its capabilities and make the most of its many functions e Reference Guide Mac OS X this manual This describes setup procedures and basic operations for the scanner e User Manual electronic manual This provides complete and comprehensive information about the scanner Hint Electronic manuals are stored as PDF Portable Documents Format files in the Manual folder of the Setup disc eoo DR 2510M o x 5 items Zero KB available Canon S imageFORMULA w DR 2510M Installer asua ReadMe s a PageManager BizCard Important Safety Instructions To ensure the safe operation of this scanner be sure to read the safety warnings and precautions described below Installation Location The performance of this scanner is affected by the environment in which it is installed Make sure that the location where the scanner is installed meets the following environmental requirements Provide adequate space around the scanner for operation maintenance and ventilation 4 100mm 4 100mm 4 100mm Provide adequate space in front of the scanner for documents output after being scanned
18. output the scanned images eeo imageFORMULA DR 2510M CaptureOnTouch H Z imageFORMULA e Click Return to main screen to return to the main screen of Scan TETA First tia e If Save to folder is selected for the output method and you click 20090224130159 Euse fle name senings Ele name settings Open storage folder the folder in which the scanned image files File type E PoF are stored will open Detail Settings Qa a Scan First a Kog E N Select Scan Job Save in folder m Save to Picture folder Continuous Scanning When you want to scan multiple documents as a single scanned image or when you want to scan a multi page document in sections select the Enable continuous scanning check box in the main screen You can do this in Scan First and Select Scan Job In such cases a confirmation screen to continue appears after Kee CURAN the documents placed in the scanner are scanned Perform one of the following If you want to continue scanning another document place the document in the scanner and click the Continue scanning button If you are finished scanning documents click the Continue to next step button 16 Output Method Settings CaptureOnTouch provides four output methods for processing scanned images The output settings that appear differ depending on the output method selected Save to folder File na
19. the scanner The scanner cannot be guaranteed to work with all USB interfaces 4 Confirm that the supplied USB cable is used to connect the scanner to the computer The scanner cannot be guaranteed to work with all available USB cables 5 If the scanner is connected to the computer via a USB hub try removing the hub and connecting directly to the computer Problem 7 Problem 3 Documents feed askew scanned images are Solutions slanted Solutions 1 Align the document guides to fit the documents as closely as possible and load the documents so that they feed straightly 2 Enable the Deskew scanner driver setting 3 If many pages have been scanned since roller cleaning clean the rollers If documents still feed askew roller replacement or other maintenance may be needed See Replacing Consumables on p 26 for roller replacement procedures Problem 5 Solutions Problem 6 Solutions 23 Both sides are not scanned even when the Duplex scanner driver setting is enabled Before executing a CaptureOnTouch job ensure that the registered job settings are appropriate for the intended scanning If Simplex is selected on the Scanner Setting tab of the Job Register dialog box scanning will always be single sided simplex To perform duplex scanning either change the job setting or create another job for duplex scanning If white lines or streaks appear in scanned images Clean both sides of the scanner g
20. without separating them bypass mode E Paper Eject Stopper Paper Eject Stopper Use the paper eject stopper that corresponds to the length of the documents you want to scan Documents The scanner can scan documents ranging in size from business cards and checks to LTR A4 The document sizes that this scanner can scan are shown below Plain Paper Size Width 1 97 to 8 5 50 mm to 216 mm Length 2 12 to 14 02 53 9 mm to 356mm Paper weight Page separation mode 14 to 32 Ib bond 52 to 128 g m 0 0024 to 0 0059 0 06 mm to 0 15 mm Paper weight Bypass mode 11 to 42 Ib bond 40 to 157 g m 0 002 to 0 0079 0 05 mm to 0 20 mm You can scan documents up to 39 2 1000 mm long by setting the scanner to the Long Document mode See Setting the Long Document Mode on page 24 important A document must meet the following criteria to be scannable e When scanning multiple documents of different sizes place the documents so that they cover the entire span of the feed rollers e lt is recommended that documents exceeding LTR 11 69 A4 297 mm size are fed one sheet at a time e Scanning documents before the ink is dry can cause problems with the scanner Always make sure that the ink on a document is dry before scanning it e Scanning documents that are written in pencil or similar material may make the rollers and scanning glass dirty which can lead to smudges on the scanned image and transf
21. Auto Color Detection documents detected as black and white binary are automatically saved as TIFF images regardless of document settings This occurs because JPEG format does not support black and white binary format images If you want to save all images in JPEG format change the scanning Mode to either Color or 256 level Gray Each scanned image of a multi page document is saved as a separate document With CaptureOnTouch you can scan multiple pages into one image file when TIFF or PDF file format is selected To do this select File type click the Detail Settings button and select Save all pages as one file in the displayed dialog box Documents feed but no scanned images are saved When Panel Feeding is selected as the feeding method on the scanner driver s setting screen after a document is fed scanning does not occur until the scan button is clicked on the scan panel Scanned images of multiple pages cannot be saved in a single JPEG or PICT file Multiple scanned images cannot be saved in a single JPEG or PICT file Save the images in either TIFF or PDF format 24 Clearing a Paper Jam When paper jams occur during scanning use the following procedure to clear them A CAUTION When removing jammed paper take care not to cut your hands on the edges of the paper 1 Remove any documents that have been left in the eject tray 2 Press the OPEN knob from both sides 0 and pull the front u
22. Feed Roller Attention To maintain maximum performance current rollers should be replaced now Tej Please follow the Replacing the Rollers in the Instructions After you complete the replacement please make sure to reset the counter Please also refer to the Instructions to reset the counter 2 Close the front unit by pressing both sides gently downwards until the latches click _ Do not show this message again Co When this message appears obtain a replacement roller kit and replace the consumables with those supplied in the kit the two roller assemblies and the document pressure guide When replacing the rollers reset the Roller Count in the scanner Opening and Closing the Front Unit 1 To open the front unit squeeze the OPEN levers together and lift it up and forward 26 Replacing the Feed Roller 4 Slide the roller fixing lever to the right so that it fits into the hole at the left side of the roller and press the lever down to secure the feed roller shaft 1 Spread the document guides all the way to the left and right and open the roller cover Replacing the Retard Roller and 3 Remove the feed roller and install a new one At this time 3 Document Holding Guide ensure that the notched end mates with the shaft in the scanner 1 Open the roller cover 27 2 Lift the roller fixing lever and slide it to the right 5 Pull the document holding guide down and forward AAA Z
23. M icon 14 Quitting CaptureOnTouch Click z CaptureOnTouch of the menu bar and click Exit in the menu FE lt gt 4 EW wed 1 40 p Q Confirm output Launch CaptureOnTouch Version Infomation Scan First L Gray PDF i E mail Color PDF A iPhoto Color JPEG le The application no longer resides on the system and the menu icon disappears Hint If you end CaptureOnTouch scanning cannot be started by pressing a job button See p 18 and p 22 In such a case start CaptureOnTouch again Restarting CaptureOnTouch Press any job button on the scanner to restart CaptureOnTouch CaptureOnTouch starts and the main screen appears Hint e CaptureOnTouch resides on the system when it starts and the CaptureOnTouch icon appears on the taskbar e You can also restart from the Finder Click the hard disk icon e g Macintosh HD the Applications folder Canon DR 2510M and then the CaptureOnTouch DR 2510M icon Scan First 3 Click Scanner setting to display the Scanner setting Operation Flow dialog box and configure the scanner settings eoo imageFORMULA DR 2510M CaptureOnTouch k Scanner se tting Color mode Scan docu ment peannt Select Scan Job a E Raia E Auto Color Detection Page Size Output method Finish Auto size detect n Select the output method save as file print etc for scanned images Ona Scanner se tting Dots per inch J Select output method DS
24. O INTERFERENCE REGULATIONS For 120 V models This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Interference causing equipment standard entitled Digital Apparatus ICES 003 of the Industry Canada R GLEMENT SUR LE BROUILLAGE RADIO LECTRIQUE For 120 V models Cet appareil num rique respecte les limites de bruits radio lectriques applicables aux appareils num riques de Classe B prescrites dans la norme sur le mat riel brouilleur Appareils Num riques NMB 003 dict e par I Industrie Canada MODEL NAMES Model DR 2010M is identical to model M11074 Model DR 2010M is the sales name of model M11074 Model DR 2510M is identical to model M11073 Model DR 2510M is the sales name of model M11073 Canon CANON ELECTRONICS INC 1248 SHIMOKAGEMORI CHICHIBU SHI SAITAMA 369 1892 JAPAN CANON U S A INC ONE CANON PLAZA LAKE SUCCESS N Y 11042 U S A CANON CANADA INC 6390 DIXIE ROAD MISSISSAUGA ONTARIO L5T 1P7 CANADA CANON EUROPA N V BOVENKERKERWEG 59 61 P O BOX 2262 1180 EG AMSTELVEEN THE NETHERLANDS CANON LATIN AMERICA INC 703 WATERFORD WAY SUITE 400 MIAMI FLORIDA 33126 U S A CANON AUSTRALIA PTY LTD 1 THOMAS HOLT DRIVE NORTH RYDE SYDNEY N S W 2113 AUSTRALIA CANON SINGAPORE PTE LTD 1 HARBOUR FRONT AVENUE 04 01 KEPPEL BAY TOWER SINGAPORE 098632 CANON HONGKONG COMPANY LTD 19TH FLOOR THE METROPOLIS TOWER 10 ME
25. OMPANYING DOCUMENTATION 5 TERM This Agreement is effective upon opening the sealed disk package and remains in effect until terminated You may terminate this Agreement by destroying the SOFTWARE and any copy thereof This Agreement will also terminate if you fail to comply with any of the terms of this Agreement In addition to Canon enforcing its respective legal rights you must then promptly destroy the SOFTWARE and any copy thereof 6 U S GOVERNMENT RESTRICTED RIGHTS NOTICE The SOFTWARE is provided with RESTRICTED RIGHTS Use duplication or disclosure is subject to restrictions as set forth in either subparagraph c 1 ii of the Rights in Technical Data and Computer Software clause at DFARs 202 227 7013 or subparagraph c 1 and 2 of the Commercial Computer Software Restricted Rights Clause at FAR 52 227 19 as applicable 7 SEVERABILITY In the event that provision of this Agreement is declared or found to be illegal by any court or tribunal of competent jurisdiction such provision shall be null and void with respect to the jurisdiction of that court or tribunal and all the remaining provisions of this Agreement shall remain in full force and effect 8 ACKNOWLEDGEMENT BY OPENING THE SEALED DISK PACKAGE YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT UNDERSTOOD IT AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS YOU ALSO AGREE THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU
26. TROPOLIS DRIVE HUNGHOM KOWLOON HONG KONG CANON KOREA BUSINESS SOLUTIONS INC 168 12 SAMSEONG DONG GANGNAM GU SEOUL KOREA PUB CE IE 745 CANON ELECTRONICS INC 2009
27. ck and White Error Diffusion 256 level Grayscale Advanced Text Enhancement II 24 bit Color Scanning Resolution Primary Scan Lines x Secondary Scan Lines 100 x 100dpi 150 x 150dpi 200 x 200dpi 240 x 240dpi 300 x 300dpi 400 x 400dpi 600 x 600dpi 30 Scanning Speed Conditions Core 2 Duo 2 4 GHz CPU 1 GB memory LTR A4 document size Black and White Simplex 200 x 200 dpi 25 pages min DR 2510M 20 pages min DR 2010M 300 x 300 dpi 25 pages min DR 2510M 20 pages min DR 2010M Duplex 200 x 200 dpi 50 images min DR 2510M 40 images min DR 2010M 300 x 300 dpi 50 images min DR 2510M 40 images min DR 2010M Grayscale Simplex 200 x 200 dpi 25 pages min DR 2510M 20 pages min DR 2010M 300 x 300 dpi 25 pages min DR 2510M 20 pages min DR 2010M Duplex 200 x 200 dpi 50 images min DR 2510M 40 images min DR 2010M 300 x 300 dpi 50 images min DR 2510M 40 images min DR 2010M 24 bit Color Simplex 100 x 100 dpi 25 pages min DR 2510M 20 pages min DR 2010M 200 x 200 dpi 25 pages min DR 2510M 20 pages min DR 2010M Duplex 100 x 100 dpi 50 images min DR 2510M 40 images min DR 2010M 200 x 200 dpi 50 images min DR 2510M 40 images min DR 2010M Interface Hi Speed USB 2 0 Other Functions Auto document thickness adjustment folio scanning External Dimensions 11 7 x 6 3 x 6 3 W x D x H 298mm x 160mm x 160mm W x D x H Maximum External Dimensions with Document Feed Tray and Eject Tray
28. cument type e Simplex and Duplex scanning with Skip Blank Page function e Continuous or single page feeding Card Scan You can scan business or ID cards Paper Size Detection The scanner automatically detects the size of a scanned document and eliminates any unnecessary space around the edges of the image when storing the image even when storing a document of irregular size Auto Color Detection The scanner detects whether the scanned document is in color or black and white and saves the image accordingly Folio Scan You can scan folded documents The scanner will scan both sides and combine the scanned images into a single image Deskew The scanner straightens scanned images when it detects that the document was placed askew Ultrasonic Double Feed Detection for the DR 2510M only Ultrasonic waves are used to detect pages that are fed at the same time as well as the space between pages Scanning stops if a double feed is detected Text Enhancement Modes The scanner is equipped with the Advanced Text Enhancement ll mode for enhancing the text when both the text and background are light These modes may not work depending on the type of document Color Drop out The scanner is equipped with a Color Drop out function that enables you to specify a color for the scanner to omit from the scanned image Skip Blank Page Function The scanner is equipped with a Skip Blank Page function that enables you to scan a docu
29. er the dirt to subsequent documents Always clean the internal parts of the scanner after scanning such documents e When scanning a two sided document that is printed on thin paper the image on the opposite side of each page may show through In this case adjust the scanning intensity in the application software before scanning the document e t is recommended that thin documents are fed one sheet at a time e Scanning the following types of documents can cause a paper jam or malfunction To scan such a document make a photocopy of the document and then scan the photocopy Carbon paper Coated paper Extremely thin translucent paper k Wrinkled or creased documents Curled documents Torn documents a Documents with paper ia clips or staples Business Card Size 1 97 x 2 12 50 mm x 53 9 mm or larger Paper weight 140 Ib bond 300g m 0 0138 0 35 mm or less important If a stack of business cards cannot be fed properly reduce the number of cards in the stack Card Size 2 12 x 3 37 53 9 mm x 85 5 mm ISO JIS standard Card thickness 0 03 0 76 mm or less Orientation Horizontal feeding only Embossed cards can be scanned A CAUTION e f you place cards to be fed vertically they may not be ejected properly and cards that get jammed may be damaged when you remove them Take care of the orientation when placing cards e Embossed cards may not be able to be scanned correctly depending
30. et Then contact your local authorized Canon dealer or service representative to have the unit serviced E Before moving the scanner be sure to turn the power switch OFF and disconnect the power plug from the power outlet A CAUTION E Do not install the scanner on a surface that is unstable or tilted or in an area subject to excessive vibrations as this may cause the scanner to fall resulting in personal injury or damage to the scanner E Never place small metal objects such as staples paper clips or jewelry on the scanner These items may fall into the scanner and cause a fire or electric shock Should such objects ever fall inside the scanner immediately turn the power switch OFF and disconnect the power plug from the power outlet Then contact your local authorized Canon dealer or service representative to have the unit serviced E Do not install the scanner in a humid or dusty location Doing so might cause a fire or electric shock Do not place objects on top of the scanner Such objects may tip or fall over resulting in personal injury E Connect only to a power outlet of the rated voltage and power supply frequency 120 V 60 Hz or 220 240 V 50 60 Hz depending on your region E When unplugging the power cord grasp it firmly by its plug Do not pull directly on the power cord as this may damage or expose the cord s internal wiring resulting in a fire or electric shock E Leave sufficient space around the power plu
31. folder Hint You can also click the CaptureOnTouch icon in the taskbar and enable or disable Confirm Output from the menu that appears File name settings Print scanned images to a specified printer When this method is selected you must specify the printer to which images will be printed Open scanned images with a specified application When this method is selected you must click the Browse button and specify the executable file for an application that can open the image file In addition configure settings for the image file to be saved Starting Scan First with the Job Button Under default settings Scan First is assigned to the first job button on the scanner Job button When you press job button 1 after placing your document in the scanner CaptureOnTouch starts up and Scan First begins When document scanning is finished the output method selection screen appears Perform the procedure from step 5 onward to output the scanned images CaptureOnTouch Scanner Settings CaptureOnTouch provides the following settings for configuring scan conditions Scanner setting Color mode a Auto Color Detection Page Size Auto size detect Orientation Dots per inch 200 dpi rey Scanning Side 2 Duplex B v Deskew automatically straighten skewed images J Text orientation recognition J Use advanced settings dialog box Note Scan with these settings Eon
32. g so that it can be unplugged easily If objects are placed around the power plug you will be unable to unplug it in an emergency E Do not allow water or flammable substances alcohol paint thinner benzene etc to spill into the scanner as this may result in a fire or electric shock E Turn OFF the power switch for safety when not using the scanner for a long period of time such as overnight Also turn OFF the power switch and disconnect the power cord from the power outlet for safety when the machine will not be used for an extended period of time such as during consecutive holidays E Do not wear loose clothing or jewelry that may get caught in the scanner while you are using it This may result in personal injury Be extra careful of neckties and long hair If anything becomes caught in the scanner immediately disconnect the power cord to stop the scanner E Be careful when loading paper into the scanner and when removing jammed paper It is possible to cut your hand on the edge of a sheet of paper Disposal When disposing of this scanner be sure to follow all local ordinances and laws or consult with the retailer who sold you the scanner When sending the scanner for repairs When a request is made for repairs the scanner needs to be sent to the specified address When sending the scanner use the packing box in which it came Firmly secure the scanner with packaging material when you place it in the packing box Feat
33. i Color JPEG iPhoto 1D Advanced display V Confirm output V Enable continuous scanning y Assign Start Job list edit Register new job y M Assign scanner button 1 to Scan First YT Preferences Help 12 Scanner Driver When you install the supplied software using the Setup disc the scanner driver is installed with CaptureOnTouch The driver can be opened from TWAIN compatible applications e g the Mac OS X standard application Image Capture for use in scanning operations For details on the scanner driver see the User Manual electronic manual eoo Properties for DR 2510M Simple Mode Advanced Mode D Scan Settings OO PropertissforDR 2s10M Simple Mode Advanced Mode User defined Ls J Favorite Settings Mode Black and W Basic Settings f maqa White ax f a Dots per inch 300 dpi E Mode Black and White Dots per inch 300 dpi HA P ize Letter 8 FA r aes Page Size Letter 8 5 x 11 in J Scanning Side _ Simplex 44 Scanning Side Simplex J Deskew Scanning Option Standard H J _ Text Orientation Recognition _ Double Feed Detection _ Deskew l Text Orientation Recognition 3 Perform Scan Double Feed Detection Detect by Ultras _ Check the image of the first page Start scanning _ Set Scanning Area Brightness Contrast Darken Lighten 0 Brigh
34. ing speed may decrease when scanning with paper size detection set to Long Document mode In Long Document mode if a document is loaded into the scanner askew it may catch on both edges of the feeder and suffer damage Make sure to take extra care that documents are loaded straight in this mode In Long Document mode documents may suffer damage because paper jam detection is delayed Make sure to take 4 extra care against paper jams in this mode Y 9 Click Reset 10 Click to close the dialog box 29 Specifications Main Unit Type Desktop sheetfed scanner Scanning Document Size Plain Paper Size Width 1 97 to 8 5 50 mm to 216 mm Length 2 12 to 14 02 53 9 mm to 356 mm Paper weight Page separation mode 14 to 32 Ib bond 52 to 128 g m 0 0024 to 0 0059 0 06 mm to 0 15 mm Paper weight Bypass mode 11 to 42 Ib bond 40 to 157 g m 0 002 to 0 0079 0 05 mm to 0 20 mm You can scan documents up to 39 2 1000 mm long by setting the scanner to the Long Document mode Business Card Size 1 97 x 2 12 50 mm x 53 9 mm or larger Paper weight 140 Ib bond 300g m 0 0138 0 35 mm or less Card Size 2 12 x 3 37 53 9 mm x 85 5 mm ISO standard Card thickness 0 03 0 76 mm or less Orientation Horizontal feeding only Embossed cards can be scanned Document Feeding Method Automatic Scanning Sensor Contact image sensor Light Source LED Scanning Side Simplex Duplex Scanning Modes Bla
35. int etc for scanned images Scanner setting Color mode Auto Color Detection ps Page Size Auto size detect Dots per inch 200 dpi Scanning Side Duplex Scanner setting Enable continuous scanning Start YI Preferences 2 Help D Ml Assign scanner button 1 to Scan First The main screen for Select Scan Job appears 3 Click a job in the Job list eoo imageFORMULA DR 2510M CaptureOnTouch imageFORMULA k Select Scan Job s N Scan First J Select Scan Job Scan gt Output confirmation gt Finish Select job and press Start button Job details Output 4 Job title Color mode Grayscale A Gray PDF Page Size Auto size detect i Dots per inch 200 dpi w Scanning Side Simplex amp E mail Color PDF Color JPEG iPhoto Advanced display M Confirm output A Enable continuous scanning Start Job list edit Register new job N M Assign scanner button 1 to Scan First YT Preferences Help 21 Click the Start button eoo imageFORMULA DR 2510M CaptureOnTouch i imageFORMULA at Is Select Scan Job S Scan First J Select Scan Job Scan Output confirmation gt Finish Select job and press Start button Job list Job details Output 4 Job title A E mail Color PDF Color JPEG iPhoto Job list edit D M Assign scanner button 1 to Scan First a Color mode OE Gray PDF Page
36. k 5 Ss m 3 3 Follow the instructions on the screen to complete 4 Click Close when installation is complete installation eoo Install DR 2510M Instal ller eoe Install DR 2510M Installer s aT 4 Install Succeeded F Click STEP 4 Connecting to a Computer Connectors Power switch Set the scanner s power switch to I ON or AUTO ON The scanner is always turned ON AUTO The scanner turns ON OFF when the computer turns ON OFF The power indicator lights green when the power is ON Power switch This completes setup E International ENERGY STAR Office Equipment Program As an ENERGY STAR Partner Canon Electronics Inc has determined that this machine meets the ENERGY STAR Program guidelines for energy efficiency The International ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment The program backs the development and dissemination of products with functions that effectively reduce energy consumption It is an open system in which business proprietors can participate voluntarily The targeted products are office equipment such as computers monitors printers fax machine copiers and scanners The standards and logos are uniform among participating nations E Trademarks e Canon and the Canon logo
37. lass and the rollers both rubber and metal If a sticky substance such as glue or correction fluid is found carefully wipe with just enough pressure to clean the area where the lines appear If the problem cannot be solved by cleaning the internal glass may be scratched Contact your local authorized Canon dealer Pages are missing When the scanner driver s Scanning Side setting is Skip Blank Page documents with very little black may be unintentionally skipped Select another scan mode setting such as Simplex or Duplex or decrease the Ratio of black pixels If pages are skipped due to the document double feeding see Problem 7 Documents jam or double feed Documents jam or double feed 1 Confirm that the roller is installed in the scanner according to the Setup Guide page insert The roller is not installed in the scanner when shipped and proper feeding is not possible until it is installed If the roller has been installed correctly clean it if necessary 2 Proper scanning may not be possible when document pages stick together due to static electricity Fan the documents before you load them 3 Set the feed selection lever to 4 Bypass and manually feed the scanner one page at a time Problem 8 Solutions Problem 9 Solutions Problem 10 Solutions Problem 11 Solutions Scanned images are saved in TIFF instead of JPEG format When the scanner driver s Mode setting is
38. me 20090224130159 M Use file name settings File type E PDF n Detail Settings Save in folder V Save to Picture folder Attach to E mail File name 20090224130404 V Use file name settings File type PDF B Detail Settings Confirming Output File name settings File name settings Save scanned images to a specified folder When this method is selected you must configure settings for the image file to be saved Start an e mail application and attach scanned images to a new e mail When this method is selected you must configure settings for the image file to be attached The supported e mail applications are Mail Mac OS X standard application and Microsoft Entourage 2004 for Mac In Select Scan Job scanned images are output according to the registered job settings If Confirm Output is selected in the main screen an output confirmation screen appears after documents are scanned allowing you to confirm and change output settings for the scanned images 17 Print Printer Name Adobe PDF 8 0 Page Setup Printer Properties Page layout Print image in actual size iy J Send to application Application Browse File name 20090224132814 V Use file name settings File type E PDF HJ Detail Settings Save in folder v Save to Picture
39. ment without storing images of blank pages regardless of whether each page of the document is two sided or one sided During duplex scanning page images are not saved for sides detected to be blank Prescan Function The scanner is equipped with a Prescan function that allows you to adjust the contrast and brightness of a prescanned image and then send the adjusted image to the application software without needing to scan the document again Job Function The scanner includes three job buttons for automatically scanning and performing operations up to ten operations such as saving printing or mailing can be registered on the scanned image Scan First Press the Job 1 button to start CaptureOnTouch which provides simple scanning by following on screen instructions Auto Start The scanner is equipped with an auto start function which enables scanning to be automatically started when a document placed in the feeder is detected Sleep Mode The scanner is designed to save energy by entering the sleep mode when it is not scanning documents Hint Some functions may not be available depending on the software you are using Names and Functions of Parts This section describes the name and function of each part Make sure E Back View to read this section and familiarize yourself with the parts of the scanner before using the scanner USB Connector Connect a USB cable that Power Switch This switch is used to turn
40. n with these settings 20 Button assignment tab Configure settings to assign the job to a job button on the scanner If Assign scanner button 1 to Scan First is selected in the main screen assignment to job button 1 is not available Output settings Scanner setting Button assignment Select button to assign Do not assign button 4 Click the OK button Job editing Job list Job details Job title No button No 0 1 Gray PDF 01 z Job title S E mail Color PDF 02 om Gray PDF Color JPEG iPhoto 03 em Output method kasi k Save as file H Unconfigured 04 m Output settings Scanner setting Button assignment Unconfigured 05 File name Unconfigured 06 20090224134406 Unconfigured 07 File name settings a File type Unconfigured 08 PDF rs Unconfigured 09 Detail Settings J Unconfigured 10 Save in folder wv Save to Picture folder E Cancel OK The job is registered according to the configured settings and appears in the job list To confirm the settings of a registered job or to change the settings click the Job list edit button Selecting Scan Jobs 1 Place the document in the scanner See p 10 2 Click the Select Scan Job tab eoo imageFORMULA DR 2510M CaptureOnTouch Q imageFORMULA a Scan First i xv S Select Scan Job Output method Finish Select the output method save as file pr
41. ner CaptureOnTouch starts up and scanning begins according to the assigned job settings Hint If Select Scan Job is executed using a job button CaptureOnTouch closes automatically 5 seconds after output processing is finished Note on Pre Assigned Jobs The pre assigned job Color JPEG iPhoto assigned to job button 3 under default settings allows you to open scanned images of documents with iPhoto and organize them as if they were photos If iPhoto is not installed on your computer an error message appears after the document Is scanned However the scanned image is still saved to the location specified for the job in this case 22 Troubleshooting Problem 4 Common Problems and Solutions This section provides recommended solutions to common problems Solutions If you have a problem that is not solved by the following contact your local authorized Canon dealer Problem 1 The scanner will not turn on Solutions 1 Confirm that the power switch is set correctly 2 Confirm that the AC adapter is plugged firmly into a power outlet 3 When the power switch is in the AUTO position the scanner only turns on when the computer is on Problem 2 The scanner is not recognized Solutions 1 Confirm that the scanner is properly connected to the computer with a USB cable 2 Confirm that the scanner is turned on See the previous problem 1 if the scanner does not turn on 3 The computer s USB interface may not support
42. nit out and downward to open it 3 Remove the jammed document from the document feeding side or document ejecting side important Make sure to pull the document out carefully without applying too much force If the jammed paper tears while you are pulling it out make sure to remove any remaining pieces from inside the scanner 25 4 Close the front unit by gently pushing it up on both sides until clicks into place Make sure that the front unit is completely closed by pushing until you hear a click After removing the jammed paper check to see if the last page was scanned correctly and then continue scanning Hint If a paper jam occurs when Rapid recovery system is enabled in the scanner driver settings the image data of the document is not saved and scanning stops This allows you to continue scanning from the document that caused the paper jam after the paper jam is fixed Appendix Replacing Consumables Hint The scanner s Feed Roller and the Retard Roller are both S O AD a X AWE DEN consumables They are subject to gradual wear during scanning As i the rollers wear documents will eventually no longer feed properly and paper jams will result When the Roller Count the total number of document sheets fed through the rollers reaches 100 000 a message appears upon computer startup requesting roller replacement Retard Roller and Document Pressure Guide in the Front Unit
43. nts be sure to perform the following Set the feed selection lever to 4 Bypass Place the card horizontally with the reverse side facing you and the top of the card facing down Up to three cards can be fed at one time IMPORTANT Always place cards horizontally Placing a card vertically may wear the card or result in feeding errors In addition cards that get jammed may be damaged when you remove them Supplied Software Use the following software supplied with the scanner to scan documents Select which software to use based on your intended purpose CaptureOnTouch This scanning application designed specifically for use with this scanner allows you to scan using easy to follow on screen instructions For details on operation see page 13 eoo imageFORMULA DR 2510M CaptureOnTouch Qn S imageFORMULA Q Scan First a b J z i Select Scan Job Output method Finish Select the outp O imageFORMULA DR 2510M CaptureOnTouch Scanner setting amp imageFORMULA Select Scan Job y Scan First Select Scan Job Scan Output confirmation gt Finish Select job and press Start button Job list Job details Output 4 Job title button E Color mode Grayscale A Gray PDF Z 3 Page Size Auto size detect amp E i Color PDF Dots per inch 200 dpi 8 man kotor w Scanning Side Simplex Enable cont
44. on the type of embossment Placing Documents 1 Open the document feed tray 3 Place the document Insert the document into the feeder with the reverse side facing you and the top of the document facing down Shift the pages of a document stack slightly so that the leading edge of the first page enters the scanner first Insert the document with the reverse side facing you e Open the document eject tray when you want to stack output documents You can also perform scanning without opening the tray f the document hangs over the edge of the eject tray open the extension tray See p 6 or use the eject stopper See p 6 that corresponds with the length of the document Slide the document guides to match the sides of inserted document 2 Set the feed selection lever For normal documents set the feed selection lever to Page Separation Multi page documents will be fed one page at a time ere ke ix R 7 J N J A K SO important Do not stack documents higher than the load limit mark q on the document guides You can stack approximately 50 sheets of 20 Ib bond 80 g m paper For details on scanning the document see page 12 and beyond 10 important e Before you place a document check to make sure it does not contain paper clips staples or other small metal objects These items may cause a fire or electrical shock damage the document or Cause a paper jam or scanner malfunc
45. orrection of errors Therefore the SOFTWARE is licensed on an AS IS basis without warranty of any kind The diskette on which the SOFTWARE is recorded is warranted against defective material or workmanship under normal use for a period of ninety 90 days from the date you purchased the same as evidenced by a receipt or otherwise The limited warranty does not apply if the failure of the diskette resulted from accident abuse or misapplication of the SOFTWARE and shall not extend to anyone other than the original user of the SOFTWARE CANON CANON S AFFILIATE THEIR DISTRIBUTOR OR DEALER DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE SOFTWARE OR ACCOMPANYING DOCUMENTATION NEITHER CANON CANON S AFFILIATE THEIR DISTRIBUTOR NOR DEALER IS LIABLE FOR ANY LOSS OR DAMAGE INCLUDING CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE SUCH AS LOSS OF PROFITS EXPENSE OR INCONVENIENCE WHATSOEVER CAUSED BY OR ARISING OUT OF THE SOFTWARE ACCOMPANYING DOCUMENTATION OR THE USE THEREOF CANON CANON S AFFILIATE THEIR DISTRIBUTOR OR DEALER SHALL HAVE NO OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT BROUGHT BY A THIRD PARTY ALLEGING THAT THE SOFTWARE ACCOMPANYING DOCUMENTATION OR THE USE THEREOF INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD PARTY THE ABOVE IS CANON S ENTIRE LIABILITY AND YOUR EXCLUSIVE REMEDY IN CONNECTION WITH THE SOFTWARE AND ACC
46. place heavy objects on the power cord and do not pull or excessively bend the power cord E Never connect the power cord when your hands are wet E Do not connect the scanner to a multi plug power strip E Do not knot or coil the power cord as this may result in a fire or electric shock When connecting the power cord make sure that the power plug is securely and completely inserted into the power outlet E Do not use a power cord or AC adapter other than the ones provided with this scanner E Do not take the scanner apart or modify it E Never try to take the AC adapter apart or modify it in any way as this is dangerous E When cleaning the scanner turn the power switch OFF and disconnect the power cord from the power supply E Clean the scanner using a slightly dampened cloth which has been well wrung out Never use alcohol benzene paint thinner or any other flammable substances E f the scanner makes strange noises or gives off smoke heat or strange odors or the scanner does not function or other abnormalities occur when you use the machine immediately turn the power switch OFF and disconnect the power plug from the power outlet Then contact your local authorized Canon dealer or service representative for further information E Do not drop the scanner or subject it to impact or strong shock Should the scanner ever become damaged immediately turn the power switch OFF and disconnect the power plug from the power outl
47. ple computers You shall not assign sublicense sell rent lease loan convey or transfer to any third party or send or bring the SOFTWARE out of the country where you originally obtain it to other countries without required authorization of applicable governments or copy duplicate translate or convert to another programming language the SOFTWARE or accompanying documentation except as expressly provided herein Except as expressly permitted under the applicable law you shall not alter modify disassemble decompile or otherwise reverse engineer the SOFTWARE or accompanying documentation and you also shall not have any third party do so 2 BACK UP COPY You may make one copy of the SOFTWARE solely for a back up purpose or copy the SOFTWARE onto the permanent storage device e g a hard disk of your computer and retain the original for a back up purpose Except as expressly permitted under the applicable law any other copying of the SOFTWARE is a violation of this Agreement You must reproduce and include the copyright notice on the back up copy 3 SUPPORT AND UPDATE Canon Canon s affiliate their distributor or dealer is not responsible for maintaining or helping you to use the SOFTWARE No updates fixes or support will be made available for the SOFTWARE 4 LIMITED WARRANTY AND DISCLAIMER OF INDEMNITY Canon Canon s affiliate their distributor or dealer will not guarantee uninterrupted service or absence or c
48. r television reception which can be determined by turning the equipment OFF and ON the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules 31 Input AC 100 to 240 V 50 60 Hz 65 VA to 82 VA Output DC 16 V 1 8A Weight Approximately 0 3 kg including power cord Replacement Parts Exchange roller kit product code 2445B001 This kit includes replacement feed and retard roller assemblies and a replacement document pressure guide e For details on replacing the parts see Replacing Consumables on p 26 e Contact your local authorized Canon dealer or service representative for detailed information about the replacement parts Product specifications are subject to change without notice Do not make any changes or modifications to the equipment unless otherwise specified in the manual If such changes or modifications should be made you could be required to stop operation of the equipment Canon U S A Inc One Canon Plaza Lake Success NY 11042 U S A Tel No 516 328 5000 RADI
49. ster up to 10 jobs for use with Select Scan Job 1 Click the Select Scan Job tab eoc imageFORMULA DR 2510M CaptureOnTouch imageFORMULA Output method Finish Select the output method save as file print etc for scanned images Scanner se tting Sr Color mode Auto Color Detect i E Page Size Auto size detect e 2 Dots per inch 200 dpi sz Q Scanning Side Duplex 1 gt lt S Ml Assign scanner button 1 to Scan First YT Preferences Help The main screen for Select Scan Job appears 2 Click the Register new job button ear imageFORMULA DR 2510M CaptureOnTouch Z imageFORMULA gt H n Select Scan Job Scan First E i S 2 NTv v sva EE Select job and press Start button Output confirmation gt Finish Job list Job details Output 4 job title button Col P G i olor mode rayscale ri Gray PDF YY Page Size Auto size detect Dots per inch 200 dpi A E mail Color PDF x Scanni i Wal Color JPEG iPhoto Start Job listedit Register new job x y F Assign scanner button 1 to Scan First YT Preferences 2 Help The Register new job dialog box appears Hint If you select a registered job and click Job list edit the Job editing dialog box appears allowing you to edit the settings of the selected job 3 Configure the job settings Select an Unconfigured job number from the job list If you
50. t Job details Output 4 Job title button Z mod Grayscal r Gray PDF 2 s Auto size detect p h 200 dpi E mail Color PDF Color JPEG iPhoto Job list edit Register new job A M Assign scanner button 1 to Scan First YI Preferences Help This method allows you to register scanning conditions and output methods as jobs and then select a job that matches your intended purpose to begin scanning This is useful for repeating specific scanning operations multiple times Scanning with the Job Buttons Scan First and Select Scan Job are pre assigned to the three job buttons on the scanner and you can start scanning by pressing one of these buttons after loading your document Job button Select Scan Job Color JPEG iPhoto Select Scan Job E mail Color PDF Starting CaptureOnTouch CaptureOnTouch resides on your system when you start up your computer and a CaptureOnTouch icon appears on the menu bar default lt gt 49 Wed 12 16 PM When you double click z CaptureOnTouch CaptureOnTouch starts and the main screen appears eoo imageFORMULA DR 2510M CaptureOnTouch Qin amp imageFORMULA le Select Scan Job Output method Finish Start Preferences z Help YT Pref 2 Hint You can also start CaptureOnTouch from the Finder Click the hard disk icon e g Macintosh HD the Applications folder Canon DR 2510M and then the CaptureOnTouch DR 2510
51. tion e Do not wear loose clothing or jewelry that may get caught in the scanner while you are using it This may result in personal injury Be extra careful of neckties and long hair If anything gets caught in the scanner immediately turn OFF the power switch and disconnect the power cord from the power outlet to stop scanning e Always smooth out any folds or curls in your documents before placing them into the feeder If the leading edge of a document is curled it may Cause a paper jam e f feeding stops due to a system error or paper jam while the scanner is scanning resolve the problem make sure that the scanned image of the last page that was successfully fed has been stored and then resume scanning the remaining document pages e After you finish scanning close the document feed tray and the document eject tray to prevent damage to the scanner while it is not being used Placing Documents in Bypass Mode When placing documents one sheet at a time or when placing documents consisting of multiple pages that are attached e g invoices set the feed selection lever to 4 Bypass Documents will be fed without page separation regardless of whether there are multiple pages important When scanning invoices or other multi page documents that are fastened together place the documents so that the edge that is fastened together is facing down 11 Placing Cards When placing cards that are thicker than standard docume
52. tness 3 C 3 128 Low High Contrast Q Q 4 I I Y I I I Image processing Gamma Settings More 3 Default J Check the image of the first page Start scanning Scanning with CaptureOnTouch What is CaptureOnTouch CaptureOnTouch is a scanning application that allows you to scan documents using easy to follow on screen instructions Save to folder Print Save to a specified folder Print to a specified printer Send to application Open scanned images with a specified application Attach to E mail Start an e mail application and attach scanned images to a new e mail CaptureOnTouch provides multiple scanning methods for you to select based on your intended purpose Scan First eoo gt ImageFORMULA DR 2510M CaptureOnTouch amp imageFORMULA Scan First akapa Gra Aw Select Scan Job Output method Finish Select the output method save as file print etc for scanned images E Scanner setting W V Assign scanner button 1 to Scan First YI Preferences 2 Help This method allows you to select an output method after a document is scanned and then configure the necessary settings Select Scan Job eoo imageFORMULA DR 2510M CaptureOnTouch imageFORMULA 1 Select Scan Job Scan First J gt Scan Output confirmation gt Finish Select job and press Start button Job lis
53. ures of the DR 2010M DR 2510M Document Scanner The main features of the DR 2010M DR 2510M document scanner are described below Compact Size The dimensions of the scanner are as follows 11 7 298 mm W x 9 8 245 mm H x 19 5 490 mm D with the feed tray and eject tray open The size of the scanner with the feed tray and eject tray closed is 11 7 298 mm W x 6 3 160 mm H x 6 3 160 mm D Fast Document Feeding The DR 2510M can scan a maximum of 25 documents per minute and the DR 2010M can scan a maximum of 20 documents per minute in a range of sizes from business card to LTR A4 size e Scanning conditions Black and white color LTR A4 portrait orientation one sided two sided 200 dpi High Image Quality The 600 dpi optical resolution sensor incorporated in the scanner enables documents to be scanned with high image quality Eject Tray The eject tray enables scanned documents to be stacked Open the eject tray when scanning documents that are not output smoothly Scanned documents can be output without opening the eject tray USB Link Switch The power of the scanner can be linked to be automatically turned ON OFF in accordance with the power of the computer USB 2 0 Interface The scanner supports Hi Speed USB 2 0 Color Grayscale Support Documents can be scanned in 24 bit color or 256 level grayscale Supports a Variety of Scanning Modes The scanner supports the following scanning modes depending on the do
Download Pdf Manuals
Related Search