Bravetti BKS600 User's Manual
Contents
1. Bravetti PLATINUM PRO Food Slicer Use and Care Instructions Model BKS600 EURO PRO OPPERATING LLC BOSTON MA 02465 Tel 1 800 798 7398 www euro pro com USER MANUAL FOR FOOD SLICER MODEL BKS600 IMPORT ANT SAFEGUARDS WARNING A risk of fire and electric shock exists in all electrical appliances and may cause personal injury or death Please follow all safety instructions 1 READ ALL INSTRUCTIONS BEFORE USING APPLIANCE 2 The appliance is designed for household use only It is not intended for commercial use The electronic scale is not for trading use 3 Do not use the appliance for other than intended use 4 Do not use outdoors 5 The safety switch prevents accidental operation of the slicer by pressing the switch plate Do not attempt to defeat this safety feature 6 Unplug the appliance from power outlet before putting on or taking off parts and before cleaning Be careful the blade continues to turn for a while even after the appliance is switched off 7 Do not operate the appliance continuously for more than 10 minutes Allow the appliance to cool down for one hour before second operation 8 Do not use the appliance to cut deep frozen food bones or jellylike wet food 9 Operate the appliance only when the blade locking knob is properly engaged and tightened Avoid contacting moving parts such as blade or gear 10 Handle the blade carefully when cleaning removing and inserting2. ICER 1 Roasts Beef pork poultry and lamb Allow roasts to stand for 20 minutes after removing from oven 2 Bulk Bacon With a sharp knife remove rind from thoroughly chilled bacon Trim bacon to fit securely on food tray fat side down 3 Cheese and cold cuts Slice as needed to retain flavor Remove the plastic or hard casting from well chilled food before slicing Use gentle pressure for uniform slices 4 Nhen you are going to slice very thin food unplug the unit and moisten the blade with a damp cloth this helps to prevent sticking If cheese builds up on blade or under blade cover unplug the slicer and wipe blade clean with a damp cloth 5 When slicing food that is not uniform in size always slice with the largest side first 6 Vegetables and fruits Slice potatoes tomatoes carrots cucumbers cabbage lettuce eggplant squash and zucchini in a matter of minutes 7 Breads Do not use excessive pressure or squeeze the loaf Trim or cut bread to fit comfortably on feeder Move the loaf of bread smoothly through the blade with continuous gentle pressure on the loaf PLATINUM PRO Bravetti EURO PRO ONE 1 YEAR LIMITED WARRANTY EURO PRO Operating LLC warrant this product to be free from defects in material and workmanship for a period of one 1 year from the date of purchase when utilized for normal household use If your appliance fails to operate properly while in use und
3. as the blade is extremely sharp Do not touch the sharp edge of the blade Do not use or install the blade in any way other than recommended in this manual 11 To avoid danger of injury always cut the food with feeder and food press The food press must not be removed unless the size and shape of the food do not permit their use 12 Always set the adjustment plate to position 0 before and after cleaning 13 To protect against risk of electric shock do not operate this appliance if it has a damaged cord or plug is not working properly has been dropped or damaged or is dropped into water or any other liquid Return the appliance to service center for examination and repair 14 Do not let the cord hang over the edge of table or touch hot surface 1 REV 08 02A 15 Do not use accessories not supplied with this appliance 16 Do not allow children to get access to this appliance 17 Close supervision is necessary when the appliance is used by or near disabled persons 18 Clean the appliance before the first time usage See Cleaning Instructions SA VE THESE INSTRUCTIONS THE APPLIANCE IS DESIGNED FOR HOUSEHOLD USE ONLY Short Cord Instructions CAUTION Ashort power supply cord is provided to reduce the risk of personal injury resulting from because entangled in or tripping over a longer cord Extension Cord Use If extension cord is required special care and caution is necessary The extension cord s
4. er normal household conditions within the warranty period return the complete appliance and accessories freight prepaid to EURO PRO Operating LLC For Customer Service support call 1 800 798 7398 or visit our website www euro pro com If the appliance is found by EURO PRO to be defective in material or workmanship EURO PRO will repair or replace it free of charge Proof of purchase date and 16 95 to to cover the cost of return shipping and handling must be included The liability of EURO PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option This warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes This limited warranty does not cover damage caused by misuse abuse negligent handling or damage due to faulty packaging or mishandling in transit This warranty is extended to the original purchaser of the unit and excludes all other legal and or conventional warranties The responsibility of EURO PRO Operating LLC if any is limited to the specific obligations expressly assumed by it under the terms of the limited warranty In no event is EURO PRO Operating LLC liable for incidental or consequential damages of any nature whatsoever Some states do not permit the exclusion or limitation of incidental or consequential damages so the above may not apply to you This warranty gives you specific legal rights and you may a
5. hould be marked with an electrical rating of 125V and at least 10A 1250W The power supply and the extension should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over accidentally Polarized Plug This appliance has a polarized plug one blade is wider than the other As a safety feature to reduce the risk of electric shock this plug is intended to fit into a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit contact a qualified electrician Do not attempt to defeat this safety feature DIRECTIONS FOR USE CAUTION Blade is sharp Handle carefully 1 10 11 Place the food slicer Fig 1 on a flat solid surface so that the appliance has good adhesion Make sure the safety lock is at 0 position before the appliance is plugged in the electrical outlet Plug in the electrical outlet with alternating current and voltage supply specified for the appliance 120 V 60 Hz 90W To turn on the appliance first turn the safety switch from position 0 to 1 then press down the pulse switch plate Fig 2 Keep pressing down the switch plate during slicing Be very careful when operating the appliance To turn off the appliance release your hand pressing the switch plate The switch plate will spring up automatically and the slicer will stop Place the food tray on the side of ap
6. lso have other rights which vary from state to state Important Carefully pack item to avoid damage in shipping Be sure to include proof of purchase date and to attach tag to item before packing with your name complete address and phone number with a note giving purchase information model number and what you believe is the problem with the item We recommend you insure the package as damage in shipping is not covered by your warranty Mark the outside of your package ATTENTION CUSTOMER SERVICE Xeon 0000000 000000000000 OWNERSHIP REGISTRATION CARD Please fill out and mail the product registration card within ten 10 days of purchase The registration will enable us to contact you in the unlikely event of a product safety notification By returning this card you acknowledge to have read and understood the instructions for use and warnings set forth in the accompanying instructions Appliance model Date purchased Name of store Owner s name Address City State Zip Code 9 Printed in China
7. pliance Fig 3 to collect the food Set the desired cutting thickness by turning the slice thickness adjustment knob Fig 4 Setting 0 20 can be chosen Always return the supporting plate to setting 0 after use The slicer can be used to cut meat ham sausage bread vegetable or cheese Blade cutting speed can be adjusted to cut different kinds of food Use the highest speed for sausage while the lowest speed is for cheese Select the cutting speed by sliding the speed control button Fig 5 to appropriate food symbol Cheese eqn Vegetable ME Bread CU Sausage Put the food on the feeder and push the food with food press plate Cut the food by sliding the feeder forward Fig 6 To avoid danger of injury always cut the food with feeder and food press plate In case the shape or size of food does not allow the use of feeder the feeder can be removed by tilting to the side Fig 7 However extra care should be taken during cutting The blade is protected by a blade cover Always cut the food with blade cover installed Turn the safety switch to position 0 after finish slicing CLEANING INSTRUCTIONS CAUTION Blade is sharp Handle carefully Do not wash in dishwasher Do not immerse the main unit in liquid Do not remove the lubricant from the gears 1 2 Always unplug the appliance and let the blade come to stop before cleaning Never immerse the appliance into water Adjust the supporting plate to se
8. tting 0 before cleaning To clean the blade remove the blade cover by sliding upward Fig 8 The blade cover has latches to engage both with motor assembly and blade Remove the blade by turning the blade knob 90 degrees clockwise Fig 9 and pulling outward Fig 10 The blade blade cover food press plate and food tray can be washed and then dried Be careful when cleaning the blade as it is extremely sharp Do not touch the sharp edge by hand For thorough cleaning pull out the motor assembly from the motor housing Fig 11 Clean the outer surface of the motor assembly by a dry cloth only Never immerse the motor assembly in water For feeder supporting plate base and motor housing clean the outer surfaces by a damp cloth Use domestic cleaning detergent for worse dirt Do not use sharp objects to remove the dirt as it will damage the coating on surface After cleaning put back the motor assembly on the motor housing Install the blade and blade cover on motor assembly in reverse order of step 4 Make sure the blade cover is properly engaged 4 5 6 T 8 9 Fig 1 1 Speed control button 8 Feeder 2 Safety switch 9 Food tray 3 Pulse switch 10 Motor housing 4 Blade 11 Motor assembly 5 Blade cover 12 Supporting plate 6 Power supply cord 13 Slice thickness adjustment knob 7 Food press plate 14 Tilting base Fig 2 HINTS FOR USING FOOD SL
Download Pdf Manuals
Related Search