Boss Audio Systems MRF90 User's Manual
Contents
1. 7 Remote Cradle Mounting Instructions There are 2 recommended mounting options 1 If mounting the cradle on a wood surface two self tapping stainless steel screws are included Hold the cradle in place and proceed with the self tapping screws 2 If mounting on the surface of a SPA Boat or other fiberglass surface we ve included an adhesive strip that is resist to most SPA chemicals saltwater and sunlight Make sure the mounting surface is clean and dry Then remove the adhesive proactive tape on both sides of the adhesive strip and apply the strip to the fiberglass surface You re now ready to mount the cradle Simply press firmly for a few seconds and it s done firmly for a few seconds and it s done Self tapping screw M3X12mm j 5 How to pair Remotes Each receiver can support up to 10 Remote Controls at the same time Method Press and hold the DISP button for 5 seconds Note If the receiver is already paired with 10 remotes successfully and you continue to pair new remotes it will automatically un pair with the the first remotes paired 6 Specifications Remote Control Power 1 pcs CR2430 Battery Up to 20 Feet 86x 56x12 mm RF Range Remote Control Dimensions H x W x D RF Receiver Dimensions 76x 42x17 mm H x W x D Note Specifications are typical Individual units may vary Specifications are subject to change and improvement without notice Reminder This unit uses 433 92MH2. 30933 AUDIO SYSTEMS MRF90 Floating Water Resistant Radio Frequency Wireless Remote With White LED LIGHT Compatible with MR2180UA MR1650UA MR1630UA 1 What s Included 1 RF Receiver LF x 1pcs 2 RF Remote Control x 1pcs Long Lasting 3V Lithium Battery x 1pcs User Manual x 1pcs Weather Resistant Plastic Remote Holder x 2 PCS Weather Resistant Self Tapping Screws x 4 pcs Double sided Mounting Tape x 2 pcs oN Oo FW Lanyard x 1pcs ie ES 3 Key Functions 1 Press MODE button to change mode 2 Press and hold Light QO button to use the white LED light 3 Press DISP button to view clock and other available information 4 Use Volume up to raise the sound volume 5 Use Volume down w to lower the sound volume 6 Press A button to seek up select the higher channel track up in different modes Or hold this button to tune up fast channel up fast forward etc in different modes 7 Press w button to seek down select the lower channel track down in different modes Or hold this button to tune down fast channel down fast rewind etc in different modes 8 Press BAND button to change different band in the AM amp FM mode if available 9 Press POWER once to turn on or off the unit MRF90 Floating Water Resistant Radio Frequency Wireless Remote With White LED LIGHT 03 2012 30933 AUDIO SYSTEMS 3451 Lunar Court Oxnard CA 93030 www bossaud
3. io com 800 999 1236 tech support www bossaudio com support X CE 2 Connecting the RF Receiver Connect the MRF90 black box receiver to the RF remote port connector at the back of the unit securely Make sure the pins are aligned properly when pugging in and the connection is secure use tape to secure the connection if needed When installing the receiver do not put it in any metal shielding for better reception O ens I oA EE 5 o T Main Unit Ie RF Remote Port J RF Remote Port RF Receiver 4 Installing Replacing the Battery 1 On the back of the Remote remove the battery like pictures below gently with a coin 2 Obtain one fully charged Cr2430 Be sure to install the new battery the same way as the old battery 3 Install the battery cover back into place being careful to align it with the rubber seal CR2430 Battery Specification Coin Type Crimp sealed Primary Lithium Battery Nominal Capacity 280mAh Nominal Voltage 3V Standard Discharge Current 0 3mA Max Discharge Current Continuous 6mA Pulse 50mA Temperature Range 10 C 60 C Weight 4 0g Dimensions Height H 3 0mm Diameter D 24 5mm Remove The Battery Out Installing Replacing the Battery continued Warning Always use the rubber ring when installing the battery cover
4. z and may interfere with other RF transmissions near this frequency
Download Pdf Manuals
Related Search