BOB Handlebar Console None User's Manual
Contents
1. Black Rod between the black metal rod ES brake cable housing and handlebar being careful not to wrap the strap around the red handlebar release lever Note older strollers do not have a black metal rod or red handlebar release lever Velcro Strap WARNINGS It is critical that the strap not wrap around the black rod brake cable housing or red handlebar release lever Wrapping the strap around the black rod can interfere with the correct function of the handlebar release system resulting in the handlebar unexpectedly releasing causing loss of control and injury Wrapping the strap around the brake cable housing can interfere with the proper function of the brake causing loss of control and injury Wrapping the strap around the red handlebar release lever can interfere with the correct function of the handlebar release system resulting in the handlebar unexpectedly releasing causing loss of control and injury Fig 2 Vecro strap routing Correct routing of the velcro Velcro Strap strap is shown in figure 2 w fin Looped Through Plastic Ring B Continue wrapping the vir velcro strap around the handlebar and insert through the black plastic ring as shown in figure 3 Velcro Strappa Around Handik Fig 3 Velcro strap routing C Loop the velcro strap through the ring and secure as shown in figure 4 OMA01B D Repeat with the above steps with the forward strap on the opposite side 3 Next attach the ba2. 800 893 2447 www bobgear com email info bobgear com Phone 208 375 5171 Fax 208 375 5172 5475 Gage St Boise ID 83706 Congratulations on your purchase of the BOB Handlebar Console It is designed to provide beverage holders and additional storage Proper installation and care will provide years of reliable service Before attempting to install your new Handlebar Console read and understand these instructions completely to insure proper installation If you are unclear on any point contact your dealer or BOB before use A WARNINGS A This product is not designed to hold hot beverages Placing hot beverages in the cup holders can result in spills and injury to you or your child including burns When placing containers in the cup holders it is critical that at least 60 of the container be inserted in the beverage holder so containers do not come out The Handlebar Console is designed exclusively for use with BOB single strollers It is not intended for use with other strollers or products INSTALLATION 1 Begin by orienting the Handlebar Console as shown in figure 1 2 The Handlebar Console attaches to the stroller handlebar by 4 velcro straps Start attaching the Handlebar Console to the handle bar with the forward right velcro strap A in figure 1 The strap attaches as follows A Align the strap with the forward edge of the handlebar foam Route the strap Routed Above underneath the handlebar and
3. the date of original purchase Warranty is only valid for the original purchaser Proof of purchase is required to exercise this warranty Labor and freight charges are not included Normal wear neglect abuse accidents improper use are not covered by this warranty Warranty claims must be made through an authorized dealer This warranty is limited to the repair or replacement of the defective part BOB shall in no event be responsible for consequential or special damages This limited warranty is the only express or implied warranty applicable to BOB Any implied warranties including warranties of merchantability and fitness shall be limited in scope and duration in accordance with this limited warranty BOB Trailers Inc 2004 2005
4. ck right strap B in figure 1 The strap attaches as follows A Align the strap so the Handlebar Console is pulled tight fore and aft Route the strap underneath the handlebar and between the brake cable housing and handlebar Fig 4 Velcro strap secured Velcro Strap Routed Above Brake Cable Housing WARNING Itis critical that the strap not wrap around the brake cable housing Wrapping the strap around the brake cable housing can interfere with the proper function of the brake causing loss of control and injury Brake Cable Housing Correct routing of the strap is shown in figure 5 B Continue wrapping the velcro strap around the handlebar and insert through the black plastic ring as shown in figure 3 Fig 5 Velcro strap routed over brake cable housing C Loop the velcro strap through the ring and secure as shown in figure 4 D Repeat with the above steps with the rear strap on the opposite side CARE INSTRUCTIONS Hand wash cold hang dry do not dry clean or iron LIMITED WARRANTY BOB Trailers Inc takes pride in its workmanship and strives to manufacture the best products possible Therefore we warranty the Handlebar Console against defects in material and workmanship subject to the conditions listed below Since no product is indestructible it does not cover defects attributable to or resulting from normal wear abuse or alteration The Handlebar Console is warranted for one year from
Download Pdf Manuals
Related Search