Blaupunkt TEV-501 User's Manual
Contents
1. on the TEV 501 gt Press the FFWD button To enable an external source to output To fast rewind the tape on the TEV 501 Press the REW button O Press the STOP button T Connecting external sources Connecting an external monitor S games consoles DVD players You can connect a monitor to the TEV i and television receivers 501 in order to output to this monitor You can connect up to two external Connect an external monitor or video and audio sources to the TEV 501 television to the AV OUT e g a games console or DVD player connection on the TEV 501 and use the monitor and loudspeakers LS for the output The TEV 501 has two 2nnecting a television receiver separate inputs for video signals and to the TEV 501 stereo audio signals The inputs are There is a 32 pin connection at the back located on the front and back of the TEV of the TEV 501 to allow you to connect 501 If all the inputs are in use the TEV the optionally available TET 01 501 gives priority to the inputs at the television receiver If you want to front of the unit purchase a television receiver for the TEV 501 please contact a Blaupunkt Connecting a games console DVD dealer P p player to the TEV 501 gt Use a suitable cable to connect a Headphone connection games console DVD player to the There are two 3 5 mm headphone VIDEO IN AUDIO IN L and connections at the front of the TEV 501 AUDIO IN R inputs at the front or labelled HEADPHONE 1 and back of2. the TEV 501 HEADPHONE 2 You can connect A l headphones to either of these jacks If Se e ia you connect a headphone to the a e games console Make HEADPHONE 1 jack the units internal absolutely certain that the cable loudspeakers will be deactivated If you colours match the jack colours on the only connect up the HEADPHONE 2 units jack sound will be outputted simultaneously over the internal loudspeakers BLAUPUNKT 19 OPERATING THE TEV 501 Adjusting the volume To increase the volume CG Press the right VOLUME button To decrease the volume CG Press the left VOLUME button Whilst you are making your adjustments a symbolic representation of the volume level appears in the display Adjusting the picture Adjusting the contrast To adjust the contrast of the monitor CG Press the PICTURE button CONTRAST appears in the display Adjust the picture contrast using the two VOLUME buttons Adjusting the brightness To adjust the brightness of the monitor Repeatedly press the PICTURE button until BRIGHTNESS appears in the display Adjust the brightness using the two VOLUME buttons 20 Adjusting the colour To adjust the colour of the monitor Repeatedly press the PICTURE button until COLOR appears in the display Adjust the colour using the two VOLUME buttons Adjusting the tint To adjust the tint of the monitor CG Repeatedly press the PICTURE button until TINT ap
3. 2 36 01 6 10 39 391 015 769 473 026 130 05 14 708 681 71 88 006 535 053 12 042 175 873 229 Blaupunkt Werke GmbH Bosch Gruppe K7 VKD 8 622 402 656 CE
4. VIDEO Travel Entertainment Video unit TEV 501 Operating and installation instructions LAUPUNKT Bitte aufklappen Open here Ouvrir S v p Aprite la pagina Hier openslaan a u b Oppna har Por favor abrir Favor abrir BLAUPUNKT BLAUPUNKT CONTROLS Video input VIDEO IN Audio input left channel AUDIO INL Audio input right channel AUDIO IN R Headphone output 1 HEADPHONE 1 Headphone output 2 HEADPHONE 2 On off button POWER Volume control quieter VOLUME picture controls Sequence switch for setting contrast brightness colour and tint PICTURE Volume control louder VOLUME picture controls Infrared receiver for remote control optional SENSOR Stop button eject cassette from the unit STOP EJECT Fast rewind button REWIND Playback button PLAY Fast forward button FFWD Input for 12 volt direct current DC 12V Video input VIDEO IN Audio input left channel AUDIO IN L Audio input right channel AUDIO IN R Output for an external monitor AV OUT Input for an optional television receiver ENGLISH Se ERLE 66 66065 BLAUPUNKT T __ 13 CONTENTS Vlait 15 Securing and installing the Leed eegen 16 Before using for the first time 16 Securing the TEV 501 between the front seats 17 Operating the TEV 501 in buildings 18 Operating the TEV 501 18 Switching the TEV 501 on off 18 P
5. gle that you find convenient Operating the TEV 501 in buildings Place the unit on a secure and level surface 5 Open the lower storage compartment in the TEV 501 s case and remove the power Supply unit 5 Connect the output of the power supply unit to the DC 12V input of the TEV 501 5 Connect the mains power cable to a 220 volt socket 18 Operating the TEV 501 Switching the TEV 501 on off CG Press the POWER button to switch the TEV 501 on off Playing a video cassette Note The TEV 501 is designed to play standard consumer video cassettes of the VHS variety Video Home System Never try inserting other cassettes other than VHS cassettes into the TEV 501 Suitable VHS video cassettes are labelled with the VHS symbol Blau punkt Werke cannot accept any liability for damage that may occur from using other video cassettes in this unit Inserting a video cassette Carefully insert a video cassette with its printed side uppermost and its flap side first into the cassette compartment of the TEV 501 Removing a video cassette CG With playback stopped press the STOP EJECT button Playing a video cassette To begin playback press the PLAY button Note Video cassettes will be played automatically if their recording protection mechanism has been activated BLAUPUNKT OPERATING THE TEV 501 Fast tape winding O First switch on the games console To fast forward the tape gt Now switch
6. ing flat disconnect the TEV 501 from the power supply when not in use The TEV 501 must always be secured in its case using the Velcro straps Fasten the unit to the eyelets at the side Ensure that the unit is attached and secured in accordance with these operating instructions The S hooks and all the straps must be attached and fastened correctly to avoid the unit causing injury in the event of an accident BLAUPUNKT NOTES To ensure that the TEV 501 is well ventilated only operate the unit with the case opened Only use the supplied power supply unit Always disconnect the power supply from the socket or cigarette lighter first before disconnecting the cable from the TEV 501 Never touch the unit with moist hands To clean the unit only use a dry lint free cloth Never use harsh cleansing agents or thinners Danger of electric shock Never open the unit s housing It does not contain any components that can be serviced by the user Remove the video cassette from the unit when not in use 15 ENGLISH SECURING AND INSTALLING THE TEV 501 Securing and installing the TEV 501 Before using for the first time 5 Open the lower storage compartment of the TEV 501 s case and remove the cigarette lighter adapter and the four straps 5 Close the lower storage compartment gt Remove the unit from its case Thread the adapter cable through the opening in the case 5 Connect the plug
7. laying a video cassette 18 Inserting a video cassette 18 Removing a video cassette 18 Playing a video cassette 18 Fast tape wimdmg 19 Connecting external sources games consoles DVD players and television receivers 19 Connecting a games console DVD player to the TEV 501 19 Connecting an external monitor 19 Connecting a television receiver to the TEV 501 19 Headphone connection 19 Adjusting the volume 20 Adjusting the picture 20 Adjusting the contrast 20 Adjusting the brightness 20 Adjusting the colour 20 Adjusting the tint 20 Technical data 21 14 BLAUPUNKT Thank you for deciding to use a Blau punkt product We wish you a lot of fun with your new piece of equipment Before operating the TEV 501 Travel Entertainment Video unit for the first time please read these operating instructions carefully and keep them in the TEV 501 s case for future reference Please observe the following safety instructions to ensure you operate the TEV 501 safely and in a manner that will not be of danger to anyone ZA The TEV 501 must be connected to a switched power supply e g the cigarette lighter and must not be connected directly to the vehicle battery To avoid the battery runn
8. pears in the display Adjust the tint using the two VOLUME buttons BLAUPUNKT TECHNICAL DATA Technical data Television standard PAL NTSC ME SECAM SECAM L Diagonal image size Approx 12 4 cm S 5 inches z Audio tracks 1 Tape width 12 7 mm Tape speed SP 33 35 mm s Fast tape winding Less than 7 minutes for a 120 minute cassette Video output 1 0 Vp p 75 ohms unbalanced Video S N Better than 40 dB Audio power 2 x 0 5 W Audio S N Better than 40 dB Electrical power supply DC 12 V AC 100 240 V 50 60 Hz Power consumption 18 W Permissible air humidity 10 75 Permissible temperature range 20 to 60 Celsius Dimensions WxHxD 275 x 345 x 125 mm BLAUPUNKT 21 Service Nummern Service numbers Num ros du service apres vente Numeri del servizio di assistenza Servicenummers Telefonnummer for service Numeros de servicio Numero de servico Deutschland Belgique Belgi France Nederland Great Britain Danmark Sverige Norge Suomi Osterreich EM S Cesk republika USA Singapore Slovensko 10 00 Tel 0 18 05 00 02 25 0 25 25 54 44 014 010 7007 023 565 63 48 018 958 383 66 44 89 83 60 08 750 15 00 66 81 70 00 094 359 91 01 6 10 39 0 015 762 241 026 130 04 41 800 266 25 28 006 535 054 47 042 175 873 212 Fax 0 51 21 49 40 02 0 25 25 54 48 014 010 73 20 023 565 63 31 018 958 383 94 44 89 86 44 08 750 18 10 66 81 71 57 094 359 9
9. to the DC 12V input of the TEV 501 O Place the unit back into the case Secure the TEV 501 using the Velcro straps located inside the case by threading the Velcro straps through the eyelets on the side of the unit 16 O BLAUPUNKT SECURING AND INSTALLING THE TEV 501 Securing the TEV 501 between the front seats Take one of the straps that does not have an S hook attached O Place the strap around one of the headrest supports on the driver seat Fasten the belt around the headrest support using the two buckles 5 Connect one of the strap s buckles to the corresponding buckle on the side of the bag You can adjust the length of the strap to suit the conditions in the vehicle interior BLAUPUNKT CG Repeat this procedure for the passenger seat gt Now take one of the straps that does have an S hook attached CG Connect the buckle of the S hook strap with one of the buckles at the lower end of the case O Place the strap around the seat rail of the driver seat or the lower safety belt attachment point Thread the strap through the S hook Pull the strap tight 17 ENGLISH OPERATING THE TEV 501 Repeat this procedure for the passenger seat 5 Open the case s upper lid gt Flip up the monitor 5 Open the zip fasteners at the front of the case The unit is angled at around 15 Close the zip fasteners until the unit is set at an an
Download Pdf Manuals
Related Search