Blaupunkt CASABLANCA RCM 85 User's Manual
Contents
1. appear in the display ua Ti LA THS CoH CD disc T TRACK title 0 24 playback time of the current title 34 Selecting a disc track using the rocker switch A Select track upwards Press briefly CUE fast advance audible Press and hold down v Repeat track Press briefly Select track downwards Press repeated ly REVIEW fast reverse audible Press and hold down lt lt Select disc downwards gt gt Select disc upwards The display shows you the selected mode SCAN Use this function to scan the CD tracks To start the SCAN Press the SC MIX button briefly The tracks will be played briefly one after the other in ascending order The num ber of the currently scanned track flash es in the display To stop the SCAN Press the SC MIX button briefly once again The system will continue to play the currently scanned track MIX Use the MIX function to play the tracks of the individual discs in random order Note that the discs themselves will be selected in nu meric order according to their position in the changer To start the MIX function e Press the SC MIX button for approxi mately 4 seconds The CD number and MIX will appear in the display To stop the MIX function e Press SC MIX briefly Notice In may happen in isolated cases that the changer fails to function properly due to volta ge drops e g when starting the engine In such a case b2. of a different kind like for example a phone or credit card the display will show WRONG KC for approxi mately 2 seconds Remove the wrong card and turn off the set Do not make further adjustments until you have a correct KeyCard available Removing the KeyCard Never pull out the KeyCard directly First press the KeyCard in This releases the card and puts it in the proper position for being removed Now you can pull it out Defining a second KeyCard Replacing a KeyCard While operating the unit with the first Key Card you can define a second one to be also used with the set Insert the first KeyCard and turn on the set Press the DSC button and select LEARN KC with A V The display will switch to CHANGE e Press the KeyCard in which releases the card and puts it in the proper positi on for being removed e Remove the first KeyCard and insert the new one while CHANGE is still being displayed Now you can also use the new KeyCard for operating your unit Amaximum of two cards can be used per set When trying to define a third one the system will automatically delete the access authorisation of that KeyCard which was not used for the learning process Displaying the radio pass data You can use the KeyCard 1 supplied with the unit to display the individual radio pass data such as the model name the type number 7 6 and the serial numbe
3. to play with the volume adjusted last When operating the unit with the igniti on being switched off the system will automatically shut down after one hour in order to avoid that the battery goes flat LD Loudness When listening at a low level the Loudness function creates a more natural sound by boosting the low frequency range To switch the Loudness on off Press LD For more information read chapter DSC programming 3 AUD GEO AUD To adjust the treble and bass frequen cies with the rocker switch A Treble v Treble lt lt Bass gt gt Bass GEO To adjust the balance left right and fader front rear with the rocker switch A Fader front Vv Fader rear lt lt Balance left gt gt Balance right To alter a setting e press AUD or GEO and then chan ge the value with the rocker switch The adjusted value is indicated in the display The last setting will be stored automati cally To finish the setting Press AUD or GEO If the setting remains unchanged within 8 seconds the display will switch back to the previous condition 4 DSC Direct Software Control Use the DSC function to customise certain programmable basic settings to suit your personal needs and prefe rences See chapter DSC pro gramming for more information 5 AF Alternative frequency during RDS operation When AF lights up in the display the radio will au
4. Y for track side 1 or A or TR2 PLAY for track 2 or B Notice If there is too much tension on the tape during playback the set may switch over by itself before having reached the end of the tape side In this case check the condition of the cassette tape Sometimes it helps to rewind it completely Dolby B NR and tape equalisation with B MTL Dolby B NR With this unit you can play back tapes recor ded with Dolby B or without noise reduction Cassette tapes recorded with Dolby NR stand out by their much lower tape hiss and the improved dynamics If Dolby B NR is switched on B will light up in the display Noise Reduction system manufactured under license from Dolby Laboratories Licensing Corporation Dol by and the double D symbol are trademarks of Dolby Laboratories Licensing Corporation MTL Switch on the MTL function to selectthe best equalisation response when using metal or CrO tapes MTL will light up in the display To switch Dolby B NR and MTL on off Press B MTL repeatedly until the desi red setting appears in the display te te ee The system enables the following settings MTL tape The display shows with Dolby B NR MTL B without Dolby B NR MTL Normal tape with Dolby B NR B without Dolby B NR Skipping repeating titles with CPS CPS stands for Cassette Program Search This function allows you to skip a cassette title or listen to it once ag
5. a warning beep will sound To switch the warning beep off proceed as described above Adjusting the volume for traffic announcements and the warning beep This volume was preset at the factory You can alter the value using the DSC function see DSC programming TA 30 Tape operation Inserting a tape Turn on the set Insert a tape Insert the tape with side A or 1 showing up the open side facing to the right amp Press to eject the tape The tape will be played in the direction used last TR1 PLAY in the display means that track 1 or A is being played Removing a tape e Press The cassette will eject Fast Forward Rewind Fast Forward e Press FF At the end of a tape side the mecha nism changes directions automatically to play the other side Stopping Fast Forward operation e Press FR Fast Rewind e Press FR At the beginning of the tape the me chanism will automatically start play back Stopping Fast Rewind operation e Press FF To switch to the other tape side Press simultaneously TR1 PLAY or TR2 PLAY shown in the display FR Fast rewind stop by pressing FF FF Fast forward stop by pressing FR PROG selector To change the tape direction during cassette playback Press FR and FF simultaneously At the end of a tape side the mechanism changes directions automatically to play the other side Autoreverse The display shows TR1 PLA
6. ain To switch the function on off e Press CPS CPS ON or CPS OFF will light up in the display for approximately 2 seconds With CPS ON Fully depress the FF button The tape is fast forwarded to the next title Ay Fully depress the FR button The tape is rewound to the beginning of the current title provided that it has already been played for more than 8 seconds Otherwise the tape will be rewound to the beginning of the previous title Switching the audio source with SRC Source Using this function you can switch between radio tape and CD changer optional opera tion or playback of any other connected de vice To switch over Press the SRC button 31 ENGLISH Tape care To avoid possible problems you should not use cassette tapes longer than 60 or 90 minutes C60 C90 Store your tapes in a cool place away from dirt dust and tempera tures exceeding 50 Celsius Allow very cold tapes to warm up before playing them in order to avoid uneven tape transport After approximately 100 hours of use dust partic les collected on the playback head or roller may lead to tape run problems and sound distortions Use a head cleaning tape to remove normal dirt build up For tougher cases use a cotton swab Q Tip soaked with alcohol Do not attempt to clean by inserting a hard object into the player 32 DSC programming DSC Direct Software Control allows you to customise cer
7. be Radio Cassette Casablanca RCM 85 Operating instructions NIRI NDS FS ED lo AF TP TAL BLAUPUNKT Bosch Gruppe Contents Short instructions 05 Important notes Precautions ccccccceceeeeeeseseseeees Traffic safety c e Installation Connection KeyCard theft protection SYSIEM eseat eanta aa Putting the unit into operation Removing the KeyCard Defining a second KeyCard Replacing a KeyCard Displaying the radio pass data Optical indication for extra security Radio operation with RDS AF Alternative frequency REG regional programme Selecting a waveband Automatic tuning unr 4 Manual tuning seee Scrolling through the broadcasting network only FM An Changing the memory bank FM Storing stations neeneeeeenn Automatically storing the strongest stations with Travelstore Recalling stored stations 00 n0000000 28 Scanning stored stations with Preset Scan Scanning stations with Radio Scan 28 Selecting the seek tuning sensitivity 28 Switching from stereo to mono FM 29 Receiving traffic programme stations with RDS EON 29 Traffic announcement priority on off 29 Warning been 29 Switching the warning beep o
8. e levels e Select the waveband e OnFM choose Travelstore or another memory bank using the FMT button To start Preset Scan Press SC MIX for approximately 2 se conds The stations will be played for approximately 8 seconds each The positions blinking in the display show you the memory bank and preset position of the currently scanned station To select a station currently being scanned and switch off Preset Scan e Press SC MIX briefly Scanning stations with Radio Scan Beginning with the station currently tuned in you can scan the waveband The radio will play each station for 8 seconds To start the scan e Press SC MIX briefly The scanned frequency or the station name will start flashing in the display During the actual scanning process SCAN will be displayed To select a station currently being scan ned and switch off the scan function Press SC MIX briefly If no station is selected the scan function will be automatically switched off after the fre quency band has been run through comple tely The unit will tune in the station listened to before starting the scan Selecting the seek tuning sensi tivity You can alter the automatic seek tuning sensitivity If lo is displayed the radio will only pick up strong local stations low sensitivity If lo does not light up the radio will also pick up weaker distant stations high sensitivity To switch over e Press lo T
9. ed The activated preset button is indicated in the display Notice Should you tune in a station which has alrea dy been stored before the corresponding preset button and the memory bank will briefly flash in the display if you have selected another memory bank 27 ENGLISH Automatically storing the stron gest stations with Travelstore You can automatically store the six most powerful FM stations of your current recepti on area sorted according to their signal strength This function is particularly conve nient on longer trips Press the FMT button for more than 2 seconds The radio will search for the strongest FM stations and store them on the memory bank T Travelstore When this process has been completed the radio will play the first station If desired stations can also be stored manu ally on the Travelstore bank see Storing stations Recalling stored stations You can recall any stored station at the touch of a button Select the waveband by pressing FMT or MeL On FM also choose the corre sponding memory bank by pressing the FMT button as many times until the desired bank appears in the display e Press the corresponding preset button briefly to recall the station 28 Scanning stored stations with Preset Scan You can have all of the stored stations played briefly on all wavebands On FM you can scan the stations of the Travelstore memory bank or of the two other storag
10. ents please read the enclosed installation and connec tion instructions carefully Do not connect the loudspeaker outputs to ground Use only the accessory and replacement parts approved by Blaupunkt 24 KeyCard theft protection system This car radio is supplied with one KeyCard as standard However the unit can also be operated with a second card If you have lost or damaged your KeyCard you can buy anew one from your specialised dealer When using two KeyCards you can indivi dually store the following functions Bass treble balance and fader settings assignments of preset buttons Loudness TA traffic announcement volume BEEP volume In addition to this the settings activated be fore switching the radio off such as the waveband station TA priority Loudness AF REG ON OFF and seek tuning sensitivi ty will also remained stored This ensures that the basic settings you have programmed will automatically be activated as soon as you have inserted your KeyCard Putting the unit into operation Turn on the set and introduce the Key Card into the slot with the contact area showing up KeyCard tongue pulled out The car radio is now ready for operation If a wrong KeyCard is inserted then CARD ERR will appear in the display In this case please do not go on operating the set After approximately 10 seconds the display will show TURN OFF Now turn off the set When inserting a card
11. ff 29 Automatic seek tuning start 30 Adjusting the volume for traffic announcements and the warning beep 30 Tape operation aen 30 Inserting a tape ceee 30 Removing a tape eeen 30 Fast Forward Rewind 30 PROG selector To change the tape direction during cassette playback nen 30 Dolby B NR and tape equalisation with B MTL 31 Skipping repeating titles with CPS 31 Switching the audio source with SRC 31 BEILER 32 DSC programming cseeeeeee 32 Overview of the DSC factory settings 33 CD changer control optional 34 Switching to changer operation with SRC on the car radio 34 Selecting a disc track using the rocker switch 0 eeceeeeeeeeeeeseeeeeeeeeeeeees 34 e Er ee te 34 MIX een 34 Appendix ee 35 Specifications uernnnnneenenennnnnnnnnn 35 19 ENGLISH Short instructions DOA Off CH 20 Volume F U This unit can also be switched on and off with the KeyCard 19 Also when being connected correctly you may turn the radio on and off via the ignition of your car Use one of the following possibilities to continue operating the set when the ignition is switched off a Switch on off with knob 1 b Remove insert the KeyCard c Press AUD 3 When turning on the unit with the Key Card or by pressing the AUD button the system will start
12. g radio operation and hold down until the radio resumes play To recall a station Select the wave band and on FM also the desired me mory bank press FMT button as many times as required Then press the cor responding preset button briefly To switch to the other side of the cassette tape Press both buttons simultaneously The display shows TR1 PLAY or TR2 PLAY Au FR Fast rewind stop by pressing FF FF Fast forward stop by pressing FR TA priority for traffic announcements If TA is displayed the system will play traffic stations only TA on off Press button GD MeL To select the MW or LW waveband Press button as many times until the desired band is adjusted FMT FM Travelstore To switch between the FM memory banks Il and T Travelstore To switch over Press FMT as many times until the desired bank is indicated in the display To store the six most powerful stations automatically with Travelstore Store Press FMT seek tuning starts Recall Press FMT as many times until the display shows T Then briefly press one of the preset buttons 1 2 3 4 5 or 6 KeyCard theft protection system To operate the set it is necessary that you have inserted the KeyCard BLAUPUNKT d 4 For this introduce the KeyCard into the slot with the contact area showing up KeyCard tongue pulled out Read also the information under Key Card Flashing KeyCard tongue When
13. he degree of sensitivity can be altered in both modes see also chapter DSC pro gramming Switching from stereo to mono FM If reception is poor you may get better sound quality by switching to mono e Press the lo button for approximately 2 seconds With mono playback the stereo sign will disappear from the display Each time the radio is switched on stereo playback is activated The unit will automatically switch to mono if the received signal is not strong enough for stereo playback Receiving traffic programme stations with RDS EON Many FM broadcasters offer traffic messa ges for their service area at regular intervals Alltraffic programme stations transmit a spe cial carrier signal alongside their program mes which is decoded by your car radio If this signal is identified TP will appear in the display Traffic Programme In addition to these there are also stations which do not actually transmit traffic pro grammes themselves but by using RDS EON they offer the possibility to receive the traffic messages broadcast by another traffic programme station in the same radio net work If you listen to one of these stations e g NDR3 TP will appear in the display provided the priority for traffic programme stations has been activated i e TA must be displayed If a traffic announcement is broadcast the radio will automatically switch to the linked traffic programme station in thi
14. ncy of the currently selected programme is always tuned in automatically This function is activated when AF appears in the display In order to switch this function on or off press the AF button briefly While searching for the strongest reception signal the radio may switch to mute briefly 26 If SEARCH appears in the display when switching on the radio or recalling one of the stored frequencies the unit is automatically searching for an alternative frequency SEARCH will disappear from the display when the alternative frequency has been found or after the frequency band has been run through completely If the reception quality of the selected pro gramme becomes too bad Tune into another station REG regional programme Certain radio programmes are split up at times into regional programmes offering lo cal information The 1st programme broad cast by NDR for example offers program mes with different contents in the northern states of Germany Schleswig Holstein Ham burg and Lower Saxony at certain times of the day If you are listening to one program me and move to an area where another linked regional programme becomes stron ger the unit will switch to that programme If you wish to continue listening to the first programme e press the AF button for approximately 2 seconds REG ON appears in the display If you leave the service area of the regional programme tuned into o
15. one broadcasting network can be received you can scroll through them in forwards direction pressing gt gt or backwards using the lt lt button e g NDR 1 2 3 4 N JOY North German broad caster For this it is necessary that the stations have been received at least once and that AF has been activated before lights up in the dis play For this purpose you may start Travelstore seek operation Press FMT for 2 seconds the system starts to run through the frequency band If AF does not light up e press AF With this the requirements for selecting sta tions with lt lt gt gt are fulfilled Changing the memory bank FM You can shift between the memory banks II and T in order to store stations and recall them later The currently selected memory bank is indi cated in the display Press the FMT button as many times until the desired memory bank lights up in the display Storing stations On FM you can store six stations on the preset buttons 1 to 6 for each of the memory banks I Il and T On MW LW you can store six stations each Select the waveband with FMT or MeL and on FM also the desired memory bank with FMT Tune in a station with the rocker switch either automatically or manually Press the desired preset button until the radio resumes play after the muting takes approximately 2 seconds confir med by beep Now the station has been stor
16. pressed for more than 2 seconds The volume can be adju sted from between 0 to 9 0 off Each alteration of this va lue is confirmed by a beep tone of the corresponding volume You can adjust the LED to flash for extra anti theft protection LED 1 LED always flas hes when the unit has been swit ched off via the ignition and the KeyCard remo ved LED 0 No flashing LOUD Loudness When listening Overview of the DSC factory at a low level the Loud settings ness function creates a LOCAL zd more natural sound by j boosting the low frequency DIS 1 range TIME OFF LOUD 1 Low boost ann 4 3 LOUD 6 Max boost LED Code 1 LOUD 4 RM Radio Monitor RM OFF With RM ON the unit will automatically switch to the tuner whenever the casset te is fast winding RM OFF The function is switched off To quit the DSC programming mode and store the adjustment e Press DSC If the setting remains unchanged within 8 seconds the system will automatically store the last adjustment The display will switch back to the previous condition 33 ENGLISH CD changer control optional You can operate the Blaupunkt CD changer CDC A05 in combination with this car radio Switching to changer operation with SRC on the car radio Make sure that a magazine is inserted Press SRC to switch between the different audio sources radio changer tape Press SRC as many times until the changer functions
17. r Press and hold down preset buttons 1 and 6 while switching on the unit e Press the MeL button within 2 seconds The radio pass data will move through the display several times To quit the function Press any button Optical indication for extra security When the car is stationary the KeyCard tongue can be switched to flash for extra anti theft security For this the following requirements must be fulfilled Permanent 12 V supply and the ignition lead must be connected correctly as illustra ted in the installations instructions LED 1 must be adjusted in the DSC mode Please refer to chapter DSC programming LED 25 ENGLISH Radio operation with RDS Radio Data System The Radio Data System offers you more convenience when listening to FM radio sta tions More and more radio stations have begun to broadcast RDS information alongside their programmes As soon as a programme has been identified the station name including a regional identi fier if applicable will appear in the display for example NDR1 NDS regional program me in Lower Saxony Germany When RDS is activated the station buttons become programme buttons You now know exactly which programme you have tuned into making it easy to find the desired station quickly But RDS offers you further advantages AF Alternative frequency The AF Alternative Frequency function makes sure that the strongest freque
18. r if you would like to take advantage of the full RDS service switch to REG OFF e Press the AF button for approximately 2 seconds until REG OFF appears When active REG ON will be briefly dis played each time the radio is switched on Selecting a waveband With this car radio you can select between the following wavebands FM 87 5 108 MHz MW 531 1602 kHz LW 153 279 kHz e Select the desired waveband by pres sing the FMT or MeL button To switch between MW and LW e Press MeL Automatic tuning A V e Press A V the car radio will automati cally search for the next station When keeping the upper or lower part A V of the rocker switch depressed seek tuning will speed up in upwards or downwards direc tion Automatic tuning i Ju A Up Vv Down lt lt gt gt Up down in short intervals AF must be switched off lt lt gt gt To scroll through the broadcasting network when AF is activated e g NDR1 NDR4 Manual tuning lt lt gt gt prerequisite AF is switched off e Press lt lt gt gt the frequency will change in short intervals in downwards or up wards direction When holding the right or left part of the rocker switch pressed down the frequency scan is speeded up Scrolling through the broad casting network only FM You can use the lt lt gt gt buttons to tune in stations of your reception area If several programmes of
19. r off Press CPS during tape operation The display shows the adjusted conditi on CPS ON OFF each time the but ton is pressed Repeat titles Press FR Skip titles Press FF 8 Cassette removal Press amp Cassette loading slot Insert tape side A or 1 up the open side facing to the right 11 Display Radio operation NIRI NIS FMTS ei Ar Te TAL NDR1 NDS Station abbreviation or FM T 5 amp lo AF TP TA LD frequency Waveband Memory bank I Il T Preset button 1 6 Stereo Seek tuning sensitivity Alternative RDS frequency Traffic programme identifier Priority for traffic programme stations Loudness 21 ENGLISH 13 SC MIX Radio operation Scan sampling all stations to be recei ved Press SC MIX briefly Tape operation TR 1 PLR TR1 PLAY Side 1 or 2 MTL Metal B Dolby B NR Preset Scan sampling all stations stored on the preset buttons Press SC MIX for approximately 2 seconds CD changer operation optional Ka ie Changer operation optional See chapter CD changer control AFTPTALD SRC Source CD 05 Disc number To switch between the available audio T 02 Title number sources e g tape radio CD changer optional 12 Fast winding PROG button 22 45 1 2 3 4 5 6 preset buttons You can store six stations on each FM memory bank I Il T To store a station Press button durin
20. riefly switch the car radio off and on again The changer will then return to normal opera tion Appendix Specifications Amplifier Output power Tuner Wavebands FM MW LW FM sensitivity FM frequency response Tape player Frequency response 4x 19 W RMS power acc to DIN 45324 3 1 or 4 x 20 W max power acc to DIN 45324 3 2 87 5 108 MHz 531 1602 kHz 153 279 kHz 1 0 pV at 26 dB signal to noise ratio 35 16 000 Hz 35 16 000 Hz Subject to modifications 35 ENGLISH 2 96 Pf Blaupunkt Werke GmbH Bosch Gruppe K7 VKD 8 622 400 491 ce
21. s case NDR2 for the duration of the message and return to the original programme NDR3 afterwards Traffic announcement priority on off If the priority for traffic announcement pro grammes is activated TA will light up in the display To switch the priority on or off Press the TA button When pressing TA while a message is being broadcast this message will be interrupted The unit will then switch back to the previous condition The priority for other traffic messa ges remains active Warning beep If you leave the reception area of the traffic programme station currently tuned into you will hear a warning beep after approximately 30 seconds This alarm tone will also be released when pressing a preset button which has no traffic programme allocated to it Switching the warning beep off a Tune into another station offering traffic information Press the rocker switch or a preset button which has a traffic programme station allocated to it Alternatively b Switch off the priority for traffic an nouncements e Press TA TA will disappear from the display 29 ENGLISH Automatic seek tuning start tape operation When leaving the reception area of the tuned in traffic programme station while listening to a tape the system will automatically start searching for a new TA programme If no such station is found within approxima tely 30 seconds tape operation will be stop ped and
22. tain programmable basic set tings to suit your personal needs and prefe rences and then store them The basic settings for this audio equipment were made at the factory In the following you can find an overview of these settings so that you can always reset to these if desired If you wish to alter any of the programming e press DSC The display will show the function adjusted last Use the rocker switch to select and adjust the functions described in the following A v Select function lt lt Adjust value gt gt Adjust value LOCAL lo To adjust the seek tuning sensitivity for local recepti on LOCAL 1 high sensitivity LOCAL 3 low sensitivity DIS TIME ON OFF LEARN KC TA VOL dx To adjust the seek tuning sensitivity for distant recep tion DIS 1 high sensitivity DIS 3 low sensitivity To select the display mode during CD changer opera tion option TIME ON display of title and playback time TIME OFF display of CD and title number If SCAN or MIX is active the system will always switch to the TIME OFF mode To define a second Key Card for use with the set Please read the information under KeyCard theft pro tection system To adjust the traffic an nouncement volume from between 1 to 9 The mes sage will then come through at this volume 1 low BEER LED code Confirmation tone for all functions which require a button to be
23. the car radio is turned off the KeyCard tongue can be switched to flash for extra anti theft protection This feature can be switched on and off via DSC CODE LED Rocker switch Seek tuning A Up v Down lt lt gt gt Up down in short intervals AF must be switched off lt lt gt gt To scroll through the broadcasting network when AF is activated e g NDR1 NDR4 Extra functions In the DSC mode Select and programme DSC functions Important notes Precautions Before starting to use your new car radio please read the information on Traffic safe ty and KeyCard theft protection system carefully Traffic safety As the driver of a motor vehicle it is your responsibility to pay attention to the traffic situation at all times Never use your car radio in a way that could distract you Please keep in mind that you travel a di stance of 14 m per second at a speed of only 50 km h Should the traffic situation become particu larly demanding we advise you notto use the radio Always make sure that you are still able to hear any warning signals coming from outsi de of the vehicle such as police or fire engine sirens so that you can react accordingly Therefore you should always select a mode rate volume for playing your car radio while you are driving 23 ENGLISH Installation Connection If you would like to install this equipment yourself or add any new compon
24. tomatically search for a frequency offering better reception of the same RDS programme To switch AF on off Press AF briefly Extra function REG ON REG OFF With REG ON the system will only switch to a better alternative frequency if the latter be longs to a linked station offering the same regional programme see REG regional programme To switch REG on or off Press AF until REG ON or REG OFF appears in the display BEEP tone 6 lo To alter the automatic seek tuning sen sitivity If lo is displayed the radio will only pick up strong local stations low sensitivi ty If lo does not light up the radio will also pick up weaker distant stations high sensitivity To switch over Press lo briefly For more information see chapter DSC programming 7 B MTL Dolby B NR Press this button to play back a tape which has been recorded with Dolby B When this button is pressed B lights up in the display Noise Reduction system manufactured under license from Dolby Laboratories Licensing Corporation Dolby and the double D symbol are trademarks of Dolby Laboratories Licensing Corporation MTL Press when using metal or CrO tapes MTL lights up in the display To switch the functions on or off Press the B MTL button during tape operation until the desired condition is displayed CPS To repeat or skip cassette titles To switch the function on o
Download Pdf Manuals
Related Search