Behringer In/2Out User's Manual
Contents
1. other than that contained in the operation instructions unless you are qualified to do so X 4 U CONTROL UCA202 User Manual LEGAL DISCLAIMER TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED BEHRINGER KLARKTEKNIK MIDAS BUGERA AND TURBOSOUND ARE PART OF THE MUSIC GROUP MUSIC GROUP COM ALLTRADEMARKS ARETHE PROPERTY OF THEIR RESPECTIVE OWNERS MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION PHOTOGRAPH OR STATEMENT CONTAINED HEREIN COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS ONLY FULLFILLERS AND RESELLERS ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION THIS MANUAL IS COPYRIGHTED NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED behringer com IN ANY FORM OR BY ANY MEANS ELECTRONIC OR MECHANICAL INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND FOR ANY PURPOSE WITHOUT THE EXPRESS WRITTEN PERMISSION OF MUSIC GROUP IP LTD ALL RIGHTS RESERVED 2013 MUSIC Group IP Ltd Trident Chambers Wickhams Cay PO Box 146 Road Town Tortola British Virgin Islands LIMITED WARRANTY For the applicable warranty terms and conditions and additional information regarding MUSIC Gro2. the BEHRINGER retailer from whom the equipment was purchased Should your BEHRINGER dealer not be located in your vicinity you may directly contact one of our subsidiaries Corresponding contact information is included in the original equipment packaging Global Contact Information European Contact Information Should your country not be listed please contact the distributor nearest you A list of distributors can be found in the support area of our website http behringer com Registering your purchase and equipment with us helps us process your repair claims more quickly and efficiently Thank you for your cooperation behringer com 2 System Requirements 9 The UCA202 is PC and Mac compatible Therefore no installation procedure or drivers are required for the correct functioning of the UCA202 To work with the UCA202 your computer must fulfill the following minimum requirements Intel or AMD CPU 1 GHz or higher G4 G5 800 MHz or higher minimum 512 MB RAM minimum 512 MB RAM USB 2 0 interface USB 2 0 interface Windows XP SP2 Mac 0S X 10 3 9 Panther or higher 2 1 Hardware connection Use the USB connecting cable supplied with the UCA202 to connect the unit to your computer The USB connection also supplies the UCA202 with current You can connect a variety of devices and equipment to the inputs and outputs 8 U CONTROL UCA202 User Manual 3 Operating Elements The VOLUME control adjusts the volum
3. cure transport Should the condition ofthe cardboard box suggest that damage may have taken place please inspect theunit immediately and look for physical indications of damage Damaged equipment should NEVER be sent directly to us Please inform the dealer from whom you acquired the unit immediately as well as the transportation company from which you took delivery Otherwise all claims for replacement repair may be rendered invalid 9 Please always use the original packaging to avoid damage due to storage or shipping Never let unsupervised children play with the equipment or with its packaging Please dispose of all packaging materials in an environmentally friendly fashion 1 1 2 Initial operation Please make sure the unit is provided with sufficient ventilation and never place the UCA202 on top of an amplifier or in the vicinity of a heater to avoid the risk of overheating 7 U CONTROL UCA202 User Manual The current supply is made via the USB connecting cable so that there is no external power supply unit required All required safety precautions have been adhered to 1 1 3 Online registration Please register your new BEHRINGER equipment right after your purchase by visiting http behringer com and read the terms and conditions of our warranty carefully Should your BEHRINGER product malfunction it is our intention to have it repaired as quickly as possible To arrange for warranty service please contact
4. e level of the and Connections headphones output Turn the control fully to the left before you connect the headphones This helps you avoid 3 1 Front panel the damage that is caused by high volume settings 3 2 Rear panel m 6 6 6 6 LI LI 5 2 3 4 3 6 ig 3 1 Front panel UCA202 Fig 3 2 Back of the UCA202 The LED indicates the status of the USB 5 Use the LINE OUT jacks for audio cables with power supply RCA connectors DIGITAL OUTPUT The Toslink jack carries an S PDIF Use the LINE IN jacks for audio cables with RCA connectors signal which can be connected via a fiber optic cable for example to the digital input of an effects device 7 The OFF ON MONITOR switch activates the monitor function In this case the input signal is routed directly to the headphones output 3 Use the jack to connect a standard pair of headphones equipped with 78 TRS connector behringer com 9 U CONTROL UCA202 User Manual 4 Working with the UCA202 4 1 Application example XENYX1204FX U CONTROL UCA202 Laptop HPS3000 ig 4 1 Common version with the UCA202 behringer com 10 U CONTROL UCA202 User Manual To provide a professional recording interface between mixing console and computer you can use the UCA202 in combination with a suitable mixing console that includes subgroup outputs This t
5. e the aux path in the channel to set up a monitor mix for live musicians To do this use the Aux Send e g Aux 1 in this channel input If the musicians want to hear themselves as well as the playback or previous recording takes use the Aux Sends in the recording channels to mix in the recording signals with the monitor mix 5 Audio Connections Although there are various ways to integrate the UCA202 into your studio or live set up the audio connections to be made will basically be the same in all cases 5 1 Wiring Please use standard RCA cables to connect the UCA202 to other audio equipment You can also use an adapter cable 11 U CONTROL UCA202 User Manual tip tip sleeve shield sleeve ig 5 1 RCA cable sleeve sleeve tip tip T M ig 5 2 Adapter cable with 14 jack 5 2 Headphones connection The UCA202 is provided with a headphones jack Here you can connect any standard pair of stereo headphones with a 78 TRS connector behringer com 6 Specifications Connectors RCA unbalanced Input impedance approx 27 kQ Max input level 2 dBV Line Out Connectors RCA unbalanced Output impedance approx 400 0 Max output level 2 dBV Digital Output Socket Toslink optical cable Output format S PDIF Phones Out Socket TRS stereo jack Output impedance approx 50 Q Max output pegel 2 dBu 2 x 3 7
6. er
7. important operating and maintenance instructions in the accompanying literature Please read the manual Caution AN To reduce the risk of electric shock do not remove the top cover or the rear section No user serviceable parts inside refer servicing to qualified personnel behringer com Caution To reduce the risk of fire or electric shock do not expose this appliance to rain and moisture The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus Caution 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 8 Only use attachments accessories specified by the manufacturer 9 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 10 CAUTION These service instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing
8. mW 1000 12 U CONTROL UCA202 User Manual Connectors typeA USB connection 5V 100 max Digital Processing Dimensions Weight Converter 16 bit converter Sample rate 32 0 kHz 44 1 kHz 48 0 kHz Dimensions HxWxD approx 0 87 x 2 36 x 3 46 approx 22 x 60 x 88 mm Weight approx 0 22 Ibs 0 10 kg System Data BEHRINGER always takes great care to ensure the highest standard of quality Frequency response 10 Hz to 20 kHz 1 dB 44 1 kHz sample rate 10 Hz to 22 kHz 1 dB 48 0 kHz sample rate THD 0 05 typ 10 dBV 1 kHz Crosstalk 77 dB 0 0 dBV 1 kHz Signal to noise ratio A D 89 dB typ 1 kHz A weighted D A 96 dB typ 1 kHz A weighted behringer com Any modifications which may be necessary will be made without prior notification Specifications and appearance of the equipment can therefore differ from the details or illustrations shown 13 U CONTROL UCA202 User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION BEHRINGER U CONTROL UCA202 Responsible Party Name MUSIC Group Services US Inc Address 18912 North Creek Parkway Suite 200 Bothell WA 98011 USA Phone Fax No Phone 1 425 672 0816 Fax 1 425 673 7647 U CONTROL UCA202 complies with the FCC rules as mentioned in the following paragraph This equipment has been tested and found to comply with the limits fora Class B digital device pursuant t
9. o part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment behringer com generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC rules Operation is subject tothe following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Important information Changes or modifications to the equipment not expressly approved by MUSIC Group can void the user s authority to use the equipment We Hear You N behringer com behring
10. ups Limited Warranty please see complete details online at www music group com Warranty 5 U CONTROL UCA202 User Manual behringer com 6 U CONTROL UCA202 User Manual 1 Introduction Welcome to the family of U CONTROL users and thank you for expressing your confidence in BEHRINGER products by purchasing the UCA202 With the UCA202 you have purchased a high performance audio interface that includes a USB connector It is thus an ideal sound card for your laptop computer or an essential recording playback component for studio environments that involve desktop computers The UCA202 is PCand Mac compatible Therefore no separate installation procedure is required while the operating system drivers ensure an extremely short latency Thanks to its robust construction and compact dimensions the UCA202 is also ideal for traveling The separate headphones output allows you to play back your recordings at any time even if you don t happen to have any loudspeakers available 2 inputs and outputs as well as the digital stereo output give you total connecting flexibility to mixing consoles loudspeakers or headphones Power is supplied to the unit via the USB interface The LED gives you a quick check that the UCA202 is properly connected to the computer The UCA202 is the ideal extra for every computer musician behringer com 1 1 Before you started 1 1 1 Shipment Your UCA202 was carefully packed at the assembly plant to assure se
11. uss 0 optical 8 _ OUTPUT PHONES VOLUME User Manual U CONTROL UCA202 Ultra Low Latency 2 In 2 Out USB Audio Interface with Digital Output behringer com behringec 2 U CONTROL UCA202 User Manual TABLE OF CONTENTS Legal Disclaimer 4 Limited Warranty 4 07 4 4 4 1 0 449 6 1 1 Before you started 2 System Requirements 7 2 1 Hardware connection 3 Operating Elements and Connections eere 8 3 1 Front panel ttt 3 2 Rear panel 4 Working with the UCA202 4 1 Application 5 Audio 5 0 4 10 II WITO em 10 5 2 Headphones connection 6 Specifications eesseessesssesossosssossosessssoseso 11 behringer com 3 U CONTROL UCA202 User Manual Important Safety EN Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION A RISQUE D LECTROCUTION NE PAS OUVRIR Caution This symbol wherever it appears alerts you to the presence of uninsulated dangerous voltage inside the enclosure voltage that may be sufficient to constitute a risk of shock Caution This symbol wherever it appears alerts you to
12. ype of setup allows you to record several signals in the computer at the same time to simultaneously play back several takes or playbacks which have been recorded and to listen tothe whole recording via loudspeakers or headphones Figure 4 1 shows a possible setup with one UCA202 Connect the outputs of the subgroup in this case ALT 3 4 OUT with the inputs of the UCA202 6 You can choose to connect the outputs 5 of the interface either to the TAPE INPUT sockets or to your monitor speakers You can connect control headphones to the socket 3 of the UCA202 or to the headphones output of your mixing console Use the USB cable supplied with the unit to connect your PC or MAC via the USB interface By routing each channel that you want to record through the ALT3 4 subgroup you can now use the input channels of the mixing console to record different signals e g microphone guitar sound module etc in the computer If you connect the OUT jacks of the UCA202 to channel inputs 7 8 not via TAPE INPUT make sure that the signal is not switched to the subgroup but instead to the main output of your mixer MUTE key on the UB1204FX PRO in channel 7 8 not pressed Otherwise feedback can occur Make sure that you use the SOURCE section on the mixing console to select the correct monitoring paths ALT 3 4 and MAIN MIX or ALT 3 4 and TAPE behringer com Ifyou lead the UCA202 back via a channel input not TAPE INPUT you can also us
Download Pdf Manuals
Related Search