Bakers Pride Oven VGG-CO User's Manual
Contents
1. 15 Rotisserie Convection Oven Operation Operation with the Controller Use the procedures below to view a separate recipe or to activate a cook cycle using a one of the preprogrammed recipes Viewing Recipes hs 4 5 Turn on the Main Power Switch The Startup screen will briefly appear then the Controller Off screen will display Touch anywhere on the touchscreen The Recipe Selection screen will appear displaying a list of recipes Use the up down arrow buttons to highlight the recipe you wish to view then touch it Recipe Settings screen will appear Use the up down arrow buttons to view any settings for the recipe selected Touch the X button momentarily to return to the previous screen Cooking 1 Turn on the Main Power Switch The Startup screen will briefly appear then the Controller Off screen will display Touch anywhere on the touchscreen The Recipe Selection screen will appear displaying a list of recipes Use the up down arrow buttons to highlight the recipe you wish to use then touch the GO button If a preheat temperature was programmed then the Preheat Cook Selection screen will appear If no preheat temperature was programmed then the controller enters the Ready To Cook mode displaying the Ready To Cook screen e lf the Preheat Cook Selection screen appears do either of the following e Touch the Preheat option to enter the Preheat mode The controller will display the Preheat screen Once t2. Controller Off Appears after the Startup screen displays This screen Indicates that the controller is turned off Touching F P anywhere on the screen will turn the controller on and display the Recipe Selection screen TOUCH TO START Recipe Selection Displays a the list of available recipes The up and down RECIPE 01 arrow buttons move the highlight box from one recipe to A the next Once the desired recipe is highlighted the user RECIPE 03 touches the GO button to start the cook cycle Touching RECIPE 04 M the X button for 3 seconds turns the controller off Touching any recipe will show the settings for that recipe Displays Preheat Temperature Cook Temperature Cook Time Hold Temperature and Cook To settings for Recipe Settings p g RECIPE 02 Preheat Temp 360F a selected recipe Touching the up and down arrow Cook Temp 360F M buttons scroll the screen to view more settings Touching the X button momentarily returns you to the previous screen Preheat Cook Displays once the user highlights a recipe and touches Selection RECIPE 02 the GO button if the recipe has a preheat temperature Preheat programmed The user selects where to start the Cook cooking cycle by touching Preheat or Cook Touching Preheat displays the Preheat screen Touching Cook displays the Ready To Cook screen If the Preheat temperature is set to OFF the controller goes directly to the Ready To Cook screen The T button can be used to display the curren
3. OST ida a oe rotti 7 FOO FIANN ena ses oe rated tin 7 SOAVE CA E et anasee es 7 Coding OOOO ONS see assess ato gti et E 7 Storage OF Prepared FOOOS ssc scisestcs seascsectecrctssaussaences ia piedi a eta ata ae ip ato ia 7 MSAN EEE RE RE 8 LST ACC and rd eA IN ER RE Re RR EE 8 OG ATION ANG A ING E AEE A E ateo ARI eee A A E tiene 8 ULI RA EEE 8 Operalloi cca 9 VOTO OPEO ee ee 9 Controls and VGC IONS gia ce coe een tanec a ani tare errata 9 Programming the Controller Using the Touchscreen Interface i 14 Programming the Controller Using the RS 232 Interface VV 15 Operation with the Controller iii rrreeeeessssseeeeeeenneesseeenes 16 AEREE RR 17 OOS ON os 18 Gonto AN INACIO Siino ini aio 18 ODOT AUT tie Venica van aan sous N e ne 20 SO OMG SDS OMS cba a sean ta etes Dance o ia i nee nan 20 LE LE US 1 OP RC RE nie ei 21 ocheduled MAINLONANCE EE iranica ita 21 VO OVEN Cleaning DAV drnrnnesenensdeenrsnensenenes en nesenes iaia 21 CO OM N CIS ANNE dan E E ee en a a ed lt ae nent 24 T OUDI S OO IC a enter Dean an er en nn in 25 OO E a o Des ee e 25 a 26 NOTOS nd a ee 28 Rotisserie Convection Oven Introduction Introduction Your BKI VGG CO is a computer controlled VGG 8 rotisserie oven mounted atop a convection oven The VGG 8 utilizes a revolving mechanism and convection heat to ensure even product cooking A touchscreen control and switches are provided to allow
4. by an authorized BKI service agent must be grounded in accordance with local codes or in the absence of local codes with the National Electrical Code ANSI NFPA 70 2002 You can obtain this code from The National Fire Protection Association Batterymarch Park Quincy MA 02269 Rotisserie Convection Oven Operation Operation VGG 8 Operation Controls and Indicators TouchTEC 4 3 2 1 CUSTOMER SIDE OPERATOR SIDE Rotisserie Convection Oven Operation Hardware Controls Item Description 1 Rotor Switch Depressing the switch allows the operator to jog the rotor position when the door is open Releasing the switch stops the rotor Main Power Isolator This light illuminates to indicate that power is being applied to the oven from Light the Main Power Isolator Circuit Breaker Main Power Switch Turns power to the entire unit on or off When placed in the on position the Touchscreen controller is powered lights illuminate and the rotor motor engages if both doors are closed When placed in the off position power is removed from the entire unit Analog Touchscreen Used for operation and programming of the oven A built in beeper is used to Controller indicate touchscreen presses and other oven functions It has 15 programmable cooking recipes Software Controls Operation Screens Screen Name Screen Description Startup Appears when the Main Power Switch is placed in the on position
5. fuses at building with building power panel power panel If problem persists contact a circuit breaker fuse or licensed electrician receptacle Blown fuse on unit Contact an authorized BKI service agent for corrective action Defective power switch Contact an authorized BKI service agent for corrective action Unit operates for a period of Problem with building power Check circuit breaker or fuses at building time then the oven shuts panel circuit breaker fuse or power panel If problem persists contact a down receptacle licensed electrician Defective over temperature Contact an authorized BKI service agent switch for corrective action Oven does not heat at all Blower fan stopped Check that blower switch is on If problem persists contact an authorized BKI service agent for corrective action Loose wire on heater circuit Contact an authorized BKI service agent for corrective action Defective relay Contact an authorized BKI service agent for corrective action Heating elements not Contact an authorized BKI service agent functioning for corrective action Oven has very slow heat up or Heating elements not Contact an authorized BKI service agent recovery functioning for corrective action 26 Rotisserie Convection Oven Maintenance Problem Possible Solution Oven will not come up to Improper thermostat setting Check temperature setting temperature Failed heating element or Contact an authorized BKI s
6. gt Md Temp Cook Time and Hold Temp The left and right arrow buttons are used to move the cursor under the character to be changed The up and down arrow buttons changes the character as desired The Preheat Temp and Hold Temp parameters can be turned off by scrolling the temperature below 150 Touch the SAVE button to save the changed parameter Touch the X button to abort all changes and return to the previous screen Programming the Controller Using the Touchscreen Interface Use the procedures below to edit a separate recipe or to change the basic controller configuration Edit a Recipe 1 9 Turn on the Main Power Switch The Startup screen will briefly appear then the Controller Off screen will display Touch anywhere on the touchscreen The Recipe Selection screen will appear displaying a list of recipes Touch any recipe for 3 seconds The Security screen will appear Use the up down and left right arrow buttons to enter the passcode and touch the GO button The Program Mode Selection screen will appear if a valid passcode is entered Touch the COOK PROGRAMS option A Recipe Edit Selection screen will appear Highlight the recipe you want to edit using the up down arrow buttons then touch the EDIT button The Parameter Selection screen will appear Use the up down arrow buttons to view the recipe parameters and touch the parameter you want to edit The Parameter Edit screen will appear Change the parameter value
7. soap and 10 11 water solution Never steam clean or get excess water in the interior of the oven as this can damage unit DO NOT USE OVEN CLEANER on this machine Caustic cleaners can cause damage to the machine Always wear appropriate personal protection equipment during the cleaning process to guard against possible injury from hot cleaning solution Place the Power Light switch in the fully counterclockwise position OFF 0 Turn the circuit breaker off that supplies power to the oven Wearing your insulated mitts remove all products from the unit Remove all food pans racks and inside bottom pan from the unit and place them in a large sink to soak in hot cleaning solution BKI Cleaner Allow the unit to cool to room temperature before proceeding Lift the left side tray rack off of its mounting brackets and out of the oven Repeat this for the right side tray rack Place the tray racks in a large sink to soak in hot cleaning solution BKI Cleaner Slide the bottom of the inside blower cabinet forward and remove from oven Place in a large sink to soak in hot cleaning solution BKI Cleaner Slide the bottom of the left side insert assembly to the center of the oven and remove from oven Place the assembly in a large sink to soak in hot cleaning solution BKI Cleaner Slide the bottom of the right side insert assembly to the center of the oven and remove from oven Place the assembly in a large sink to soak in hot cl
8. three 2 second beeps indicating that the product can be loaded The user places the product to be cooked into the cooking cavity and touches the COOK button to start the cooking process If the door is opened and or the temperature drops below 25 below the preheat temperature the screen will flash and beep every 30 seconds until the COOK button is touched The highlighted letter H works as described for the Preheat screen The T button works as described for the Preheat Cook Selection screen Touching the X button for 3 seconds returns you to the Recipe Selection screen Displays once the COOK button is touched from the Ready To Cook screen This screen shows the cooking temperature the time remaining in the cook cycle and the elapsed time shown with the progress bar at the bottom of the screen Hold the X button for 2 seconds to stop the cook in progress The EXTRA button can be used to add more cook time to the cycle The cook cycle ends when the cook time elapses This is indicated by three 2 second beeps If a hold temperature was programmed then the Hold screen is displayed If no hold temperature was programmed then the screen will flash and beep until touched The highlighted letter H works as described for the Preheat screen The T button works as described for the Preheat Cook Selection screen Touching the X button for 3 seconds returns you to the Preheat Cook Selection screen 11 Rotisserie Convection Oven Operation ___ S
9. using the left right and up down arrow buttons then touch the SAVE button to save your changes You will return to the Parameter Selection screen Repeat the process to change any other parameters 10 Touch the X button as necessary to return to the Recipe Selection screen 14 Rotisserie Convection Oven Operation Edit the Basic Setup 1 8 9 Turn on the Main Power Switch The Startup screen will briefly appear then the Controller Off screen will display Touch anywhere on the touchscreen The Recipe Selection screen will appear displaying a list of recipes Touch any recipe for 3 seconds The Security screen will appear Use the up down and left right arrow buttons to enter the passcode and touch the GO button The Program Mode Selection screen will appear if a valid passcode is entered Touch the BASIC SETUP option A Basic Setup Selection screen will appear Touch the parameter that needs to be changed A Basic Setup Parameter Edit screen appears Change the parameter value using the left right and up down arrow buttons then touch the SAVE button to save your changes You will return to the Basic Setup Selection screen Repeat the process to change any other parameters Touch the X button as necessary to return to the Recipe Selection screen Programming the Controller Using the RS 232 Interface The TouchTEC controller incorporates an RS 232 interface allowing factory and field personnel to read out modify and wr
10. CODE i UNITS E screen to configure the controller to display temperature SIGNAL MODE Cont in Fahrenheit of Centigrade to use short or long beeps at the end of a cook cycle and to modify the four digit passcode Touch the X button to return to the previous screen RECIPE 01 Appears when the COOK PROGRAMS option is touched from the Programming Mode Selection screen This screen is used to select the recipe you want to edit RECIPE 03 Use the up and down arrow buttons to highlight the RECIPE 04 recipe then touch the EDIT button Touch the X button to return to the previous screen Program Mode Selection Recipe Edit Selection 13 Rotisserie Convection Oven Operation Screen Name Screen Description lt Recipe Parameter Appears when a recipe is selected and the EDIT button Selection Edit RECIPE 02 is touched from the Recipe Edit Selection screen This Preheat Temp 360F screen is used to select a specific recipe parameter to Cook Temp 360F M edit Use the up and down arrow buttons to scroll Cook Time 1 10 through the list of parameters and touch the parameter you want to change Touch the X button to return to the previous screen Recipe Parameter B Appears when a recipe parameter is touched from the Recipe Parameter Selection screen This screen is used A Ck Temp 360F A to edit a specific recipe parameter The editable V parameters are Recipe name Preheat Temp Cook E KI
11. OW button down to increase the time The longer the button is held down the faster the rate at which the time will increase The DOWN ARROW button is used in the same manner as the UP ARROW button except it will cause the time to decrease The time is increased or decreased in 30 second increments START STOP button Starting the Timer Pressing this button while the timer is not active will cause the timer to begin counting down the time on the display Stopping the Timer Pressing this button while the timer is active will stop the timer from counting down and display the remaining time Time cannot be changed with the TIME SELECT buttons at this point If this button is pressed again the timer will continue counting down from the point it was stopped Resetting the Timer Pressing and holding this button for longer than two 2 seconds will reset the timer and the display will return to the original starting time At this point time can be changed using the TIME SELECT buttons or the preset buttons ALARM button This button allows the user to set an elapsed time at which the internal alarm will sound during a cycle The time is set by pressing and holding the ALARM button while using the UP and DOWN arrows to change the time The controller will limit the alarm time to be less than the currently programmed interval cycle time The default alarm time is 0 00 which disables it The ALARM time is saved on power down in the same manner as the las
12. Rotisserie Convection Oven Combination MODEL VGG CO Operation amp Installation Manual Fresh ideas in foodservice equipment Warranty Information LIMITED ONE YEAR WARRANTY BKI The Company warrants to the original purchaser that at time of shipment from the Company factory this equipment will be free from defect in materials and workmanship Written notice of a claim under this warranty must be received by the Company within ONE YEAR from the date of installation but no longer than ONE YEAR AND THREE MONTHS from date of shipment from the factory Defective conditions caused by abnormal use or misuse lack of or improper maintenance damage by third parties alterations by unauthorized personnel acts of God failure to follow installation and or operating instructions or any other events beyond the reasonable control of the Company will NOT be covered under this warranty The obligation of the Company under this warranty shall be limited to repairing or replacing at the option of the Company any part with the exception of lamps fuses and glass which are not covered under warranty which is found defective in the reasonable opinion of the Company Any part found defective by the Company will be repaired or replaced without charge F O B factory Simpsonville South Carolina or F O B authorized BKI Distributor The Company and or its authorized representatives will assume the normal replacement labor expense for the defective part f
13. amage or death could result if attempting to install this oven eee yourself Ensure that an authorized BKI service agent install the oven f Risk of Electrical Shock Appliance must be secured to building structure Follow AWARNING tethering kit instructions for installation sold separately Unpacking and Handling It is the owners responsibility to file all freight claims with the delivering truck line Inspect all cartons and crates for damage as soon as they arrive If damage to cartons or crates is found or if a shortage is found note this on the bill of lading all copies prior to signing If damage is found when the equipment is opened immediately call the delivering truck line and follow up the call with a written report indicating concealed damage to your shipment Ask for an immediate inspection of your concealed damage item Packaging material MUST be retained to show the inspector from the truck line Remove all packing from the interior and exterior of the oven Location and Clearance 1 Place the unit not less than 8 from the back wall 2 Lock the casters so the oven does not move After every time the oven is moved make sure the casters are locked Wiring AWARNING Electrocution equipment failure or property damage could result if an unlicensed Free eat electrician performs the electrical installation Ensure that a licensed electrician perform the electrical installation The oven when installed
14. certain that you have thoroughly trained your employees about operating the equipment safely e Make certain the equipment is in proper working condition If you make unauthorized modifications to the equipment you will reduce the function and safety of the equipment Rotisserie Convection Oven Introduction Safety Labels Label Description BKI Part Caution Do not use harsh cleaners when N0166 Front Control panel cleaning this unit below switches Danger High Voltage Turn power off before N0202 2 3 Side covers amp Power servicing May have more than one disconnect entry hole on control switch panel Danger This appliance has more than one N0298 1 Top of CO back control power supply connection point Disconnect all panel power supplies before servicing Warning For continued protection against risk N0542 1 On fuse bracket inside of fire and electrical shock replace with 15 component compartment Amp fuse only CO Rating Tag N0023 Bottom of back control panel Warning Risk of electrical shock Appliance QC Printed 1 On panel between back must be secured to building structure See control panel and motor installation instructions plate at bottom Rotisserie Convection Oven Introduction Health And Sanitation Practices BKI Rotisserie Ovens are manufactured to comply with health regulations and are tested and certified to NSF and FSA standards You must operate the equipment properly using only qualit
15. creen Name Screen Description Hold Displays once the cook cycle is complete if a hold RECIPE 02 temperature was programmed This screen displays the 350 Time hold temperature or nothing if set to OFF and the 0 09 elapsed time in the hold mode The EXTRA button is available here so the product can be cooked for more oteng LE time if required The highlighted letter H works as described for the Preheat screen The T button works as described for the Preheat Cook Selection screen Touching the X button for 3 seconds returns you to the Recipe Selection screen Extra Cook EXTRA COOK Appears when the EXTRA button is touched from the buttons to set the amount of additional cook or hold time in 5 minute increments Touch the GO button to add the additional time you set Touch the X button to return to the previous screen without adding any extra cook or hold time 9 Ta Cooking or Hold screens Use the up and down arrow 12 Rotisserie Convection Oven Operation Software Controls Programming Screens Screen Name Screen Description Startup _ Appears when the Main Power Switch is placed in the on position Controller Off Appears after the Startup screen displays Indicates that the controller is turned off Touching anywhere on the screen will turn the controller on and display the Recipe Selection screen TOUCH TO START Recipe Selection Appears once the Controller Off screen is
16. e Caustic cleaners can cause damage to the machine Never steam clean or get excess water in the interior of the cabinet as this can damage unit This appliance is not intended to be cleaned with a water jet 1 Allow oven to cool below 50 C 120 F 2 Turn the Main Power Switch off and disconnect from the Main Power Isolator Circuit Breaker 3 Empty the grease drawer using the drain valve or fat pump 4 Remove all food products from the unit 5 Remove V spits meat forks hanging baskets and drip trays from the unit and place them in a large sink to soak in hot cleaning solution Clean the components with warm water a sponge and BKI Cleaner Wipe dry with a clean cloth 21 Rotisserie Convection Oven Maintenance 6 Remove the Rotor System as described below a Lift the washer from the groove and slide down the shaft b Slide each rotor cup down the shaft c Remove the inner shaft NOTE The welded bead in the center of shaft denotes the shaft removal direction d Remove rotors 7 Place the Rotor System components in a large sink to soak in hot cleaning solution Clean the components with warm water a sponge and BKI Cleaner Wipe dry with a clean cloth 8 Remove the Fan Guard Circulation Bottom and Fan Blades as described below a Unfasten counterclockwise each 1 4 turn latch on the Fan Guard and remove from oven FAN GUARD AB55131900 RSS ET 1 4 TURN LATCH 22 Rotiss
17. eaning solution BKI Cleaner Clean the outside of the oven with warm water a sponge and approved cleaner which is authorized for use on food surface areas Wipe the unit dry with a soft cloth Finish cleaning the parts wipe dry and reassemble the oven 24 Rotisserie Convection Oven Maintenance Troubleshooting VGG Unit will not turn on Unit power plug disconnected Plug unit into mating receptacle Main Power Isolator Light where applicable is not lit Problem with building power Check circuit breaker at building power panel supply If problem persists contact BKI service agent for corrective action Unit will not turn on Blown Fuse Contact BKI service agent for corrective Main Power Isolator Light action is lit Safety cut out thermostat tripped Contact BKI service agent for corrective or defective action E Defective contactor Contact BKI service agent for corrective action Rotor not rotating Door not completely closed Check that both doors are completely closed Defective door switch Contact BKI service agent for corrective action Blown Fuse Contact BKI service agent for corrective action Defective contactor Contact BKI service agent for corrective action Defective motor or capacitor Contact BKI service agent for corrective action Rotor will not rotate while Defective rotor switch Contact BKI service agent for corrective depressing Rotor switch action with door open but opera
18. east up and legs down Ensure that legs of adjacent birds DO NOT PRESS TIGHTLY TOGETHER this will cause the area of contact to be under cooked 3 Load the meat forks by holding the meat fork with the handle to the right hand side facing up 4 Open the oven door 5 Press Rotor Switch to rotate rotor to open position if required 6 Place the pointed ends of the meat fork into the left hand disc holes 7 From the control side push the meat fork into the disc to allow the right hand handle end pins locate into the right hand disc 8 Be sure to adjust the meat fork position so that the handle end locates firmly in the spit groove Baskets Baskets can be used for large chickens or other meats After loading with product simply locate pins in the holes on the discs 17 Rotisserie Convection Oven Operation CO Operation Controls and Indicators Refer to the figure and table below for an explanation of controls and indicators Rotisserie Convection Oven Operation Item Description _ Digital Timer Thermostat The digital timer consists of an LED display beeper and 8 buttons described below LED indicator Prior to the start of a timing cycle the LED will be OFF When running a timing cycle the LED will flash At the end of a timing cycle the LED will turn ON steady When idle the LED is off TIME SELECT 2 arrow buttons Two arrow buttons on the front panel are used to set the time Hold the UP ARR
19. erie Convection Oven Maintenance b Pull Circulation Bottom out of oven then unscrew clockwise the wing nut on each Blower Fan to remove the fan blades CIRCULATION BOTTOM NS Q KI D WB55127800 e w i AA FAN BLADE FN0032 WING NUT NUT292 JAM NUT NUT293 9 Place the Fan Guard and Circulation Bottom in a large sink to soak in hot cleaning solution Clean the components with warm water a sponge and BKI Cleaner Wipe dry with a clean cloth 10 Carefully clean the fan blades using a scrub brush and hot cleaning solution Do not bend or disfigure the fan blades 11 Clean the top of oven Carefully clean around fan and surrounding areas 12 Clean grease drawer and tray area with hot soapy water 13 Replace the grease drawer 14 Clean the outside and inside of the rotisserie oven with warm water a sponge and an approved cleaner which is authorized for use on food surface areas 15 Reassemble the oven 23 Rotisserie Convection Oven Maintenance CO Oven Cleaning The oven must be cleaned at the end of each business day It is easier to clean while still warm Cleaning is not only necessary for sanitary reasons but will increase sales appeal and maximize operating efficiency DANGER Failure to remove power from this unit may cause severe electrical shock This unit may have more than one disconnect switch ACAUTION Using abrasive cleaners may damage the oven finish Use only a mild
20. ervice agent blower fan for corrective action Product not cooked thoroughly Oven not preheated Be sure to preheat the oven before placing product in oven Door left open Keep door closed when not loading oven Improper time or temperature Check for proper time and temperature setting Failed heating element Contact an authorized BKI service agent thermostat or blower fan for corrective action 27 Rotisserie Convection Oven Notes Notes 28 Rotisserie Convection Oven 29 is BKI P O Box 80400 Simpsonville S C 29680 0400 USA http www bkideas com Made and printed in the U S A L10132 0407
21. for quick setup and operation The convection oven is 7 14 cubic feet and has a solid state timing control Both units have removable components that allow for easy maintenance and cleaning The BKI name and trademark on this unit assures you of the finest in design and engineering that it has been built with care and dedication using the best materials available Attention to the instructions in this manual regarding proper installation operation and maintenance will result in long lasting dependability and ensure the highest profitable return on your investment NOTICE PLEASE READ THIS ENTIRE MANUAL BEFORE OPERATING THE UNIT If you have any questions please contact your BKI Distributor If they are unable to answer your questions phone the applicable BKI Technical Services Department BKI North America 864 963 3471 BKI Europe 44 0870 9904242 Safety Precautions Always follow recommended safety precautions listed in this manual Below is the safety alert symbol When you see this symbol on your equipment be alert to the potential for personal injury or property damage Safety Signs and Messages The following Safety signs and messages are placed in this manual to provide instructions and identify specific areas where potential hazards exist and special precautions should be taken Know and understand the meaning of these instructions signs and messages Damage to the equipment death or serious injury to you or other
22. full disconnection for overvoltage Category III conditions An IEC approved cord and plug combination will meet this requirement Units not provided with a cord and plug do not meet this requirement In accordance with Local and or National wiring codes the installer must provide the means of full disconnection Safe Work Practices Wear Safe Clothing Appropriate To Your Job Always wear your insulated mitts when handling hot oven parts or touch any hot metal surface If you lose or damage your mitts you can buy new ones at your local restaurant equipment supply store or from your local BKI Distributor Always wear non skid shoes when working around the oven or any other equipment Never wear loose clothing such as neckties or scarves while operating this equipment Keep loose hair tied back or in a hair net while operating this equipment Always wear appropriate personal protection equipment during the cleaning process to guard against possible injury Rotisserie Convection Oven Introduction WARNING DANGEROUS VOLTAGE This equipment uses high voltage Serious injury can occur if you or any untrained or unauthorized person installs services or repairs this equipment Always Use an Authorized Service agent to Service Your Equipment Keep this manual with the Equipment This manual is an important part of your equipment Always keep it near for easy access If you need to replace this manual phone the applicable BKI Technica
23. he preheat temperature is reached the controller enters the Ready To Cook mode e Touch the Cook option to enter the Ready to Cook mode Once the temperature is within 5 of the cook temperature in the Ready To Cook mode the controller will emit three 2 second beeps indicating that the oven can be loaded with product Load the product into the oven Use the Rotor Switch on the front panel to operate the rotors during loading Close the door Touch the COOK button The controller now enters the cook mode and displays the cooking temperature time remaining in the cook cycle and the elapsed time If necessary use the EXTRA button to add more cook time to the cycle At the end of a cook cycle the controller will emit three 2 second beeps and enter the Hold mode and display the Hold screen if a Hold temperature was programmed If a Hold temperature was not programmed the screen will flash and beep until touched Open the oven door and check the product for proper internal temperature If necessary use the EXTRA button to add more cook time Unload the product if it is done 16 Rotisserie Convection Oven Operation Accessory Use Standard Meat forks The standard meat forks are ideal for chicken and poultry Use the following procedure to prepare the bird for loading in the oven 1 Fold wings to back place on back with cavity away from you 2 Run pointed ends of meat fork through sides of chicken under wings and through thighs br
24. ion Oven Operation ltem Description Function a Power Light Used to turn the oven power and lights ON 1 or OFF 0 Place the knob in the Switch center position to power the oven Place the knob in the fully clockwise position to 3 position power the oven and the lights Place the knob in the fully counterclockwise position to turn the oven off Blower Switch Used to turn the fan on providing optimum air circulation for even baking Place the 2 position knob in the fully clockwise position to turn on the fan The fan is automatically turned off when the door is opened Operating the Oven 1 Place the Power Light switch in the fully clockwise position This will apply power to the oven and turn the lights on 2 Place the Blower switch in the ON 1 position 3 Press and hold the TIME SELECT arrow buttons on the digital timer until the desired cook time is displayed or recall a preset time by quickly pressing the appropriate preset button 4 Pre heat the oven by setting the thermostat to the desired temperature The thermostat light will turn off when the temperature is reached 5 Open the door and load product into oven once the oven has pre heated NOTE Keep oven door closed when not loading oven to avoid a sharp decline in oven temperature 6 Activate the timer by pressing the START STOP button on the digital timer The timer will begin to count down 7 When the timer has counts down to 0 the digita
25. ite in the entire recipe and controller configuration using a special Controller Configuration program on a PC The program allows a user to read the configuration data from the controller edit any feature of the configuration write data back to the controller save the data to a file on the PC and to retrieve the data from a previously created file The file saved in the PC contains a description field to aid in identifying the contents of the configuration file Follow the steps below to program the controller using the RS 232 interface 1 2 Connect the communications interface module between the serial port on the PC and the controller Start the Controller Configuration program Select the COM port that the controller will use to communicate with the PC from the pull down list in the Controller Com area Click the OPEN button and select a previously created configuration file or click the READ button to download the configuration data from the controller Edit any of the following Description of the configuration file Recipe Parameters Max number of recipes visible four digit passcode Unit of Measurement for Temperature display and the Beep Type used at the end of the cook cycle Touch the SAVE button and save the file using a different name Touch the WRITE button to upload the new configuration data back to the controller Disconnect the the communications interface module between the serial port on the PC and the controller
26. l Services Department BKI North America 864 963 3471 BKI Europe 44 0870 9904242 Protect Children Keep children away from this equipment Children may not understand that this equipment is dangerous for them and others NEVER allow children to play near or operate your equipment Keep Safety Labels Clean and in Good Condition Do not remove or cover any safety labels on your equipment Keep all safety labels clean and in good condition Replace any damaged or missing safety labels Refer to the Safety Labels section for illustration and location of safety labels on this unit If you need a new safety label obtain the number of the specific label illustrated on page 6 then phone the applicable BKI Technical Services Department BKI North America 864 963 3471 BKI Europe 44 0870 9904242 Rotisserie Convection Oven Introduction Be Prepared for Emergencies Be prepared for fires injuries or other emergencies Keep a first aid kit and a fire extinguisher near the equipment You must use a 40 pound Type BC fire extinguisher and keep it within 25 feet of your equipment Keep emergency numbers for doctors ambulance services hospitals and the fire department near your telephone Know your responsibilities as an Employer e Make certain your employees know how to operate the equipment e Make certain your employees are aware of the safety precautions on the equipment and in this manual e Make
27. l timer beeper will sound Press the START STOP button 8 Using your oven mitts open the door and unload the product 9 Place the Blower switch in the OFF 0 position 10 Place the Power Light switch in the fully counterclockwise position OFF 0 Cooking Suggestions Most recipes can be adjusted for convection oven use by decreasing the temperature by 25 F and decreasing cooking time about 25 Dishes with cooking times over 45 minutes and that might dry out too much like lasagna or meatloaf should be covered for the first half of the cooking time 20 Rotisserie Convection Oven Maintenance A CAUTION Maintenance Failure to comply with the maintenance below could result in a serious accident or equipment damage Failure to remove power from this unit before performing maintenance may cause severe electrical shock This unit may have more than one disconnect switch Scheduled Maintenance VGG Oven Cleaning Daily Cleaning is not only necessary for sanitary reasons but will increase sales appeal and maximize operating efficiency ACAUTION Failure to remove power from this unit may cause severe electrical shock This unit may have more than one disconnect switch Always wear appropriate personal protection equipment during the cleaning process to guard against possible injury Using abrasive cleaners may damage the cabinet finish Use only a mild soap and water solution DO NOT USE OVEN CLEANER on this machin
28. or the period of the warranty as stated above excluding travel and or other expenses incidental to the replacement of the defective part where replacement work is performed during standard business hours and not subject to overtime holiday rates and or any additional fees IN NO EVENT SHALL THE COMPANY BE LIABLE FOR LOSS OF USE LOSS OF REVENUE OR LOSS OF PRODUCT OR PROFIT OR FOR INDIRECT OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO FOOD SPOILAGE OR PRODUCT LOSS WARRANTY DOES NOT COVER GLASS BREAKAGE THE ABOVE WARRANTY IS EXCLUSIVE AND ALL OTHER WARRANTIES EXPRESS OR IMPLIED ARE EXCLUDED INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE REPLACEMENT PARTS Any appliance replacement part with the exception of lamps fuses and glass which proves to be defective in material or workmanship within ninety 90 days of installation will be replaced without charge F O B Factory Simpsonville SC or F O B authorized BKI Distributor The user shall have the responsibility and expense of removing and returning the defective part to the Company as well as the cost of reinstalling the replacement or repaired part Rotisserie Convection Oven Table of Contents Table of Contents Table OE OPC INNS iced ai 1 BEE OOO ssc Lai 2 oder PEC DUO aaa 2 odie y oe and Messages ina 2 SPec Preca iON aa e E D eee ne 3 oeo Gl a OS ria 3 I E ES E E AE E E E A 6 Health And Sanitation PIECES sierra rie dra et a
29. persons may result if these messages are not followed This message indicates a potentially hazardous situation which if not avoided could AWARNING result in death or serious injury This message indicates an imminently hazardous situation which if not avoided will result in death or serious injury AC AUTION This message indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury It may also be used to alert against unsafe practices NOTICE This message is used when special information instructions or identification are required relating to procedures equipment tools capacities and other special data Rotisserie Convection Oven Introduction Specific Precautions A CAUTION Equipotential Ground Plane When a high current flows through a conductor differences in potential appear between the conductor and nearby metallic surfaces near the appliance As a result sparks may be produced between the appliance and surrounding metal surfaces These sparks could cause serious injury damage or fire BKI provides an Equipotential ground terminal for the connection of a bonding conductor after the installation of the appliance per IEC60417 1 This terminal is located on the drive side of the oven base and is marked with this symbol Y Full Disconnection for IEC CE Regulations In accordance with Local and or National wiring codes the installer must provide a means of
30. t interval time When a time cycle is running and the alarm time has elapsed the internal alarm will sound for 10 seconds For example a cycle time 10 00 and alarm time of 2 00 would cause the alarm to sound for 10 seconds once the controller has counted down from 10 00 to 8 00 A B C D preset buttons These buttons are used to save and recall preset cycle and alarm times saving operator time and minimizing error when changing interval cycle times and alarm times To save the current interval and alarm times into one of the preset locations press and hold the A B C or D preset button for 2 seconds and the controller will double chirp to indicate the times have been saved To recall any preset time press and quickly release the appropriate button and the time values are loaded and displayed Beeper A beeper sounds when the timer counts down to 0 Pressing the START STOP button stops the beeper and resets the timer causing the display to return to the original starting time At this point time can be changed using the TIME SELECT buttons or the preset buttons The beeper will also sound for 10 seconds if the alarm time has elapsed during a timing cycle Display Used to display the time Used to set the cook temperature Turn the thermostat knob clockwise to the desired cook temperature A light will turn on when the thermostat calls for heat The light will turn off when the temperature is reached 19 Rotisserie Convect
31. t oven temperature Touching the T button displays the temperature then automatically returns to the previous screen in 2 seconds Touching the X button momentarily returns you to the previous screen Cook Time 1 10 10 Rotisserie Convection Oven Operation ScreenName Screen Description Ready to Cook RECIPE 02 250Fa Preheating RECIPE 02 390F T READY RECIPE 02 350F 050 CT EE EXTRA Displays once the user touches the Preheat option from the Preheat Cook Selection screen The Preheat cycle heats the cooking cavity up to the pre defined preheat temperature Once this temperature is reached the unit automatically switches to the Ready To Cook mode A small highlighted letter H will appear to the right of the temperature display to indicate that the controller has energized the heating elements The absence of the letter H indicates that the controller has de energized the heating elements as the oven temperature has reached the set temperature limit The T button works as described for the Preheat Cook Selection screen Touching the X button for 3 seconds returns you to the Recipe Selection screen Displays once the user touches the Cook option from the Preheat Cook selection screen or once the preheat cycle is finished or directly from the Recipe Selection screen if no preheat temperature was programmed When the temperature is within 5 of the cook temperature the controller will emit
32. tes with doors closed Oven does not heat at all Improper program settings Check program settings a Improper parameter settings Contact BKI service agent for corrective action Fan cover amp circulation bottom Check that components are properly installed not installed or improperly installed Fan cover switch defective Contact BKI service agent for corrective action D Defective controller or contactor Contact BKI service agent for corrective action Heating elements not Contact BKI service agent for corrective functioning action Oven heats up slowly Improper line voltage Contact BKI service agent for corrective action 25 Rotisserie Convection Oven Maintenance Defective blower fan motor Contact BKI service agent for corrective action Defective heating element Contact BKI service agent for corrective action Control displays 999 Temperature probe connection Contact BKI service agent for corrective under the temperature loose or defective probe action display Cavity lights do not Blown fuse Contact BKI service agent for corrective illuminate when unit is on action Individual cavity lamp Defective bulb Contact BKI service agent for corrective does not illuminate action CO Unit will not turn on Oven is not connected to power Have a licensed electrician connect the source oven to an appropriate power source Power to unit is not on Problem Check circuit breaker or
33. touched RECIPE 01 Touch any recipe for 3 seconds to enter the programming mode Touch the X button for 3 seconds RECIPE 03 to turn the controller off RECIPE 04 Appears upon entering the programming mode and is a used to enter a 4 digit passcode When the controller is Program Security ENTER CODE 0000 a gt first powered 0000 is used to access the programming mode Upon subsequent access if you don t want to use a special passcode but want to leave it 0000 just press the GO button If you do want to use a special passcode configure one using the Basic Setup screen Use the left and right arrow buttons to move the cursor under the digit to be changed The up and down arrow buttons increase or decrease the digit as desired Touch the GO button to submit the security passcode If the passcode is valid the Programming mode Selection screen will appear If the passcode is invalid the Program Security screen will reappear showing the passcode you entered Touch the X button to return to the previous screen PROGRAMMING MO Appears once a valid passcode is entered from the Security screen Touch the BASIC SETUP option to change basic controller parameters Touch the COOK PROGRAMS option to change cook parameters for a specific recipe Touch the X button to return to the Recipe Selection screen Basic Setup BASIC SETUP Appears when the BASIC SETUP option is touched from the Programming Mode Selection screen Use this CHANGE
34. y products and use meat thermometers to insure meats are thoroughly cooked Food Handling e Wash hands thoroughly in warm soapy water after handling raw poultry or meats e Clean and sanitize all utensils and surfaces that have been in contact with raw products Clean and sanitize the meat forks or baskets between cooking e Never place cooked meats on the same surfaces used to prepare raw meats unless the area has been thoroughly cleaned and sanitized Storage Of Raw Meats e Designate an area or shelf strictly for the storage of all raw meats to be used in the rotisserie e Raw product must always be stored at temperatures below 38 F 3 C e Never store or mix raw foods above cooked foods as this is a health hazard The drippings from raw foods contaminate cooked or processed foods e All chicken and chicken parts to be stored overnight must be thoroughly iced down and refrigerated Coding Cooked Foods All products cooked during the day should be sold the same day NOTE It is not the intent of the rotisserie program to have unsold merchandise at the end of the cooking day Follow your company s procedures for the handling of any leftover product Storage Of Prepared Foods e Cold foods should be kept at or below 38 F 3 C e Hot foods must be maintained to meet local health codes usually a minimum 145 F 63 C Rotisserie Convection Oven Installation Installation AXWARNING Serious injury equipment d
Download Pdf Manuals
Related Search