Avaya PeriProducer 3.00 (Software Release 3.00) - Business Communications Manager Release Notes
Contents
1. Trademark Conventions The following trademark information is presented here and applies throughout for third party products discussed within this manual Trademarking information is not repeated hereafter Solaris and Motif are registered trademarks of The Open Group in the U S and other countries Solaris SunOS OpenWindows SPARC and UltraSPARC are trademarks or registered trademarks of Sun Microsystems Inc in the United States and other countries Microsoft MSSQL Windows Windows 2000 Internet Explorer and the Flying Windows logo are either trademarks or registered trademarks of Microsoft Corporation Oracle is a registered trademark of Oracle Corporation Sybase and SYBASE are trademarks of Sybase Inc or its subsidiaries Informix and INFORMIX are registered trademarks of Informix Corporation or its affiliates P0605081 Ver 2 3 Page 11 PeriProducer 3 00 Release Notes This page has been intentionally left blank Page 12 P0605081 Ver 2 3 PeriProducer 3 00 New Features and Enhancements This chapter covers 1 New Features and Enhancements 2 PeriProducer Block Changes 3 Discontinued Features Functions 4 Other PeriProducer Changes PeriProducer 3 00 Release Notes New Features and Enhancements Page 14 New Blocks The following blocks are new to PeriProducer 3 00 Block Function Abort Abort input output Bridge Perform bridging functions moved from Originate block2. AVAYA PeriProducer 3 00 Release Notes Software Release 3 00 Avaya Business Communications Manager Release 6 0 Document Status Standard Document Number P0605081 Document Version 2 4 Date June 2010 AVAYA 2010 Avaya Inc All Rights Reserved Notices While reasonable efforts have been made to ensure that the information in this document is complete and accurate at the time of printing Avaya assumes no liability for any errors Avaya reserves the right to make changes and corrections to the information in this document without the obligation to notify any person or organization of such changes Documentation disclaimer Avaya shall not be responsible for any modifications additions or deletions to the original published version of this documentation unless such modifications additions or deletions were performed by Avaya End User agree to indemnify and hold harmless Avaya Avaya s agents servants and employees against all claims lawsuits demands and judgments arising out of or in connection with subsequent modifications additions or deletions to this documentation to the extent made by End User Link disclaimer Avaya is not responsible for the contents or reliability of any linked Web sites referenced within this site or documentation s provided by Avaya Avaya is not responsible for the accuracy of any information statement or content provided on these sites and does not necessarily endorse the products se
3. appear in this manual only where it is referred to in a product For examples a PeriProducer application the PERImps package the perirev command etc P0605081 Ver 2 3 Preface Organization of This Manual A pope he dt The chapters are as follows Chapter 1 PeriProducer 3 00 New Features and Enhancements Discusses features and enhancements new to PeriProducer 3 00 and related materials Chapter 2 Porting 2 30 Applications to 3 00 Outlines procedures and configurations for porting applications made with PeriProducer 2 30 and bringing them into PeriProducer 3 00 Procedures for installing PeriProducer as part of the complete MPS software package are included in the Installing MPS Software on the Solaris Platform and Installing MPS Software on the Windows Platform Conventions Used in This Manual P0605081 Ver 2 3 This manual uses different fonts and symbols to differentiate between document elements and types of information These conventions are summarized in the following table Conventions Used in This Manual Sheet 1 of 2 Notation Normal text important term system command command condition and alarm file name directory on screen field lt KEY NAME gt Description Normal text font is used for most of the document The Italics font is used to introduce new terms to highlight meaningful words or phrases or to distinguish specific terms from nearby text This font ind
4. a corresponding VENGINE runtime option is available intermsg intermsg maxmessage Unsupported mode mode notice notice P0605081 Ver 2 3 P0605081 Ver 2 3 PeriProducer 3 00 New Features and Enhancements Environment Options Conversions Sheet 7 of 7 2 30 Environment Option 3 00 Equivalent numset rscertime rscintime setvpsline softterm speak timedcall unnotice vmstimedcall vpsrcvtime webtimeout Conditions numset rscertime rscintime setvpsline softterm speak timedcall unnotice vmstimedcall vpsrcvtime webtimeout When a PeriProducer 2 30 application is opened in 3 00 PeriProducer attempts to automatically convert handle conditions to their counterparts in 3 00 Condition conversions shown with a preceding dollar sign are displayed in the application as the 2 30 condition but are automatically converted to the appropriate 3 00 condition at runtime The following table lists the 2 30 condition the corresponding 3 00 condition if any and how PeriProducer 3 00 converts the condition when a 2 30 application is ported to 3 00 2 30 Condition abend addfail addsucc altlinkdown ansfail asrdet asyncdata Conditions Conversion Sheet 1 of 10 3 00 Condition Conversion abend abend importfail w Status addfail ErrlnUse in condition data importcmp importcmp altlinkdown altlinkdown answerfail answerfail asrdet asrdet Unsupported Page 29 PeriProducer 3 00 Release Notes P
5. 000 42 Application Porting Considerations 42 Porting Standard 2 30 Toolkit Applications to 3 00 42 Load into PeriProducer 3 00 0 000 42 Use the PeriProducer Command Line 42 Porting Events erin Genesee Renee rte eh ee eas 43 Porting MPS Toolkit Applications to 3 00 44 MPS Toolkit Replacement 0 0 0 0 00 000 44 Replace Previous MPS Toolkit 4 44 Page 4 P0605081 Ver 2 3 P0605081 Ver 2 3 Table of Contents Load into PeriProducer 3 00 0000005 45 Use the PeriProducer Command Line 45 Known Conversion Issues 0 0 0 cece eee eee eee 47 Set Resource Label in 2 30 0 00 0 ccc eee es 47 Unsupported 2 30 Resources 0 0 0 0 e eee eee 47 Resource Block Conversions 000 cece eee 47 Flushing the Speak Prompt Buffer 48 System Transfer Connection ID Datacard 48 Automatic Detection of Speech or DTMF Input AUTOID 48 Page 5 PeriProducer 3 00 Release Notes This page has been intentionally left blank Page 6 P0605081 Ver 2 3 Preface PeriProducer 3 00 Release Notes Scope The manual PeriProducer 3 00 Release Notes provides a summary of new features and enhancements to PeriProducer 2 30 This manual does not describe PeriProducer 3 00 features and enhancements in detail For a more complete description see the Pe
6. Notes Page 28 Environment Options Conversions Sheet 6 of 7 2 30 Environment Option 3 00 Equivalent cproc smrt udata Unsupported as environment option Use either the Protocol Data fields in the Answer Disconnect Originate and Call Control blocks as appropriate or the Answer block Proceeding Call function Refer to the protocol specific documentation for details on sending call state information Unsupported as environment option Use the Protocol Data fields in the Answer Disconnect Originate and Call Control blocks as appropriate Unsupported as environment option Use the Protocol Data fields in the Answer Disconnect Originate and Call Control blocks as appropriate Optional Exception Conditions crefer Unsupported as environment option crepeat Unsupported as environment option rngback Unsupported as environment option uedit3 Unsupported as environment option in the context of taking a digital system out of wait for an outdial complete message Generic Environment Options Phone Line Manager Options Superseded by Application and System Options Speech Manager Options Superseded by Application and System Options Host Manager Options Superseded by Host Environment Vengine Options Vengine Options PeriWeb Options PeriWeb Options VENGINE Environment alarmdbtask alarmdbtask apprestart apprestart centurymark centurymark debug debug deltimedcall deltimedcall hnowait Unsupported
7. enable autoid have at minimal the DTMF and LVR resources on after the prompt completes P0605081 Ver 2 3
8. in PeriProducer 2 30 Call Control Send data to telephony protocol layer perform a hookflash moved from Originate block in PeriProducer 2 30 Call Conferencing Manage conference call functions Call Progress Detection Manage call progress detection functions Edit Sequence Manage touch tone input editing and user edit sequences Line Operations Perform phone line operations e g offer call accept call get line application resource from pool Media Operations Perform operations on MultiMedia File elements or audio files Select Input Not currently implemented See the PeriProducer 3 00 User s Guide for full descriptions of the blocks Call Conferencing Call Conferencing allows up to 16 full participants or 15 full participants with 19 listen port callers to connect to a call Per line talk and listen privileges can be set at the start of a conference and dynamically changed during the conference Call Conferencing includes the coaching feature which allows a conference administrator a coach to talk to another person in the conference a student and have the speech output heard only by the student The actual number of ports available on a system is determined by the DSP configuration Block level Access to Protocol Data Telephone line function blocks Answer Disconnect Call Control Originate can send receive protocol data directly to from the telephony protocol layer using built in block functions Specify data
9. recording saves all audio that occurs on a phone line caller and system For example an application can record a full conversation between a caller and a referral agent Recording can also be set to record either caller only or system only output Moved Functions Element deletion functions moved to the Media Operations Block Recorded Element Destinations PeriProducer 3 00 supports recording directly into a specified audio format file typically WAV Applications can also append recordings to existing MMF elements Abort Recording using Touch Tones Callers can abort CMR recordings using a touch tone s Note that this differs from using a touch tone to terminate and subsequently save a recording Resource Block Asynchronous Execution Changes There is no longer an Async checkbox in the Resource block To perform the resource receive asynchronously uncheck the Wait box Resource Support The following new resources are available in the Resource block lvr p lvr s extts r sip DTMF Player Fax Recorder FullDuplex Recorder Many resources are no longer supported see Unsupported Resources on page 21 Page 20 P0605081 Ver 2 3 PeriProducer 3 00 New Features and Enhancements Discontinued Features Functions P0605081 Ver 2 3 Fax Composition Fax composition is not supported in PeriPro 3 00 Faxes to be sent must be created by external applications or received and stored for later use by the MPS Har
10. to send or receive using standard PeriProducer data cards or literals send only P0605081 Ver 2 3 P0605081 Ver 2 3 PeriProducer 3 00 New Features and Enhancements Blocking Non blocking Execution Many PeriProducer blocks allows the option of choosing blocking execution waits at that block until it receives success failure message or non blocking execution continues to next block without waiting for message execution A Wait checkbox enables disables blocking execution for the applicable blocks See Blocking Non blocking Operation in the PeriProducer 3 00 User s Guide for details Resource Pool Support The MPS allows resources such as phone lines and applications to be defined in the configuration files as shared pools In the appropriate blocks e g Line Operations PeriProducer provides built in block access to these resources Saving Partial Recorded Data PeriProducer saves partially received Caller Message Recording messages and faxes in the event of a receive failure The partial data is either stored in a new file if receiving directly into a file or the application receives a Media Storage token which references an element in a MultiMedia File This behavior can be optionally enabled and disabled in a Record block Call Progress Detection Using Call Progress Detection CPD is updated in PeriProducer 3 00 CPD is controlled by dynamically enabling and disabling specific tone event detection in the C
11. tpickup Unsupported vbridge Unsupported Call Progress Detection Environment cpansup Unsupported cpdial Unsupported cpdisc Unsupported decide Unsupported notone Unsupported pickup Unsupported P0605081 Ver 2 3 Page 25 PeriProducer 3 00 Release Notes Page 26 Environment Options Conversions Sheet 4 of 7 2 30 Environment Option rsilence rvoice silence stop tone voice window 3 00 Equivalent Unsupported Unsupported Unsupported Unsupported Unsupported Unsupported Unsupported Speech Management Environment clear vioabort Host Environment er freevt getvt headermode hostctl intime parameter refer rfno session setaid unlocks usepool Supported for legacy applications only Use the Abort block with the Caller I O Only option enabled Unsupported as environment option Use the Abort block er Supported for legacy applications only Use the Send Host block Free VT in Control gt Function gt Controls option Supported for legacy applications only Use the Send Host block Get VT in Control gt Function gt Controls option headermode hostctl intime Supported for legacy applications only Use the Send Host block parameter in Function gt Controls option refer rfno session setaid unlocks usepool Advanced Phone Line Management phone capdtmf capmf captdd detect Unsupported as environment option Unsupported as environment option Unsupp
12. 081 Ver 2 3 Page 17 PeriProducer 3 00 Release Notes Block Name SHost1 Send Screen Message contro Naned From Length Function J enter Send Enter Apply Clear Screen PAKey PFKey HOST Information Send SYSREQ User API Send IMMED Reset Device Send LOCK new VT options Move Cursor to Home Get VT ee Free YT Parameter Setting Host Environment Parameters Host environment parameters are sent from the Send Host block This function replaces the Environment block host option Block Name SHost1 Send Screen Message contro1 Naned From Length Function J enter Send Enter Apply Clear Screen PaKey PFKey HOST Information Send SYSREQ User API Send IMMED Reset Device Send LOCK parameter option Move Cursor to Home Get VT Free YT Parameter Receive Host Block Asynchronous Operation The Asynchronous checkbox is replaced by the Wait checkbox see Blocking Non blocking Execution on page 15 Receive Host operates asynchronously when the Wait checkbox is unchecked Page 18 P0605081 Ver 2 3 P0605081 Ver 2 3 PeriProducer 3 00 New Features and Enhancements Send Fax Block Fax Composition Removed The fax Composition feature is not supported All controls options used to create and store composed faxes are removed Send Fax from TIFF File PeriProducer 3 0 supports sending faxes directly from TIFF format files TIFF faxes no longer need to be imported into a
13. LF OF YOURSELF AND THE ENTITY FOR WHOM YOU ARE INSTALLING DOWNLOADING OR USING THE SOFTWARE HEREINAFTER REFERRED TO INTERCHANGEABLY AS YOU AND END USER AGREE TO THESE TERMS AND CONDITIONS AND CREATE A BINDING CONTRACT BETWEEN YOU AND AVAYA INC OR THE APPLICABLE AVAYA AFFILIATE AVAYA Copyright Except where expressly stated otherwise no use should be made of the Documentation s and Product s provided by Avaya All content in this documentation s and the product s provided by Avaya including the selection arrangement and design of the content is owned either by Avaya or its licensors and is protected by copyright and other intellectual property laws including the sui generis rights relating to the protection of databases You may not modify copy reproduce republish upload post transmit or distribute in any way any content in whole or in part including any code and software Unauthorized reproduction transmission dissemination storage and or use without the express written consent of Avaya can be a criminal as well as a civil offense under the applicable law Third Party Components Certain software programs or portions thereof included in the Product may contain software distributed under third party agreements Third Party Components which may contain terms that expand or limit rights to use certain portions of the Product Third Party Terms Information regarding distributed Linux OS source code for those Products tha
14. MultiMedia File and accessed by a media storage token this is still supported Fax Mode Removed PeriProducer 3 0 supports only Group 3 faxes Receive Fax Block Receive Fax Direct into TIFF File Applications can save an incoming fax directly to a TIFF format file In previous versions of PeriProducer faxes were stored in MultiMedia Files and had to be exported to individual TIFFs Saving to Named Element A fax can be saved to a specific named element in a MultiMedia File If the application does not specify an element name the fax is stored as a new element and can be accessed by the returned media storage token Local Station ID The Local Station ID which typically represents the phone number of the station receiving the fax can be specified in the block The Local Station ID is typically displayed on the transmitting fax machine Fax Mode Removed PeriProducer 3 0 supports only Group 3 faxes Originate Block Moved Functions All bridging functions are moved to the new 3 00 Bridge Block Hookflash is moved to the Call Control Block The End Transfer function is deleted the Disconnect block can be used for this purpose Page 19 PeriProducer 3 00 Release Notes Record Block Asynchronous Recording Asynchronous recording allows for an unlimited duration message Asynchronous recording is explicitly started and stopped by Begin and End functions of the Record block Full Duplex Recording Full duplex
15. Ns Bw ngs Maeda a oo 7 DOOD Cs ov ho 8 arate tut ee ner oS A dw Pea wee ee eres SIS 8 Intended Audience 2 4 2 34g Sab es and eens ee oN rc ee etek 8 How to Use This Manual sc fis eg ae eee Sk Biers Se 8 Organization of This Manual 0 00000 e ee eee 9 Conventions Used in This Manual 000000 9 Solaris and Windows 2000 Conventions 10 Two Button Windows 2000 vs Three Button Solaris Mouse 11 Trademark Conventions ss n8 6 5 45 4S Been a Re ewes NS 11 PeriProducer 3 00 New Features and Enhancements 13 New Features and Enhancements 0 0055 14 New BOOKS cto site erie tg ea ata tes es 14 Call Conferencing iessen wiceiprate dente opened te wae wes 14 Block level Access to Protocol Data 14 Blocking Non blocking Execution 15 Resource Pool Support 0 00 c eee eee eee 15 Saving Partial Recorded Data 0 04 15 Call Progress Detection lt s 00 0 5 08st aie eh ee are at 15 PeriProducer Block Changes 0 0000s ee eee eee 16 Connection IDs Caller I O blocks 0 16 Accessory Toolkit Blocks 0 0 00 000s e eee 16 Answer BIOCK a east a shaw ty a ewe vee oe eee NAE 16 Continue on Ring Detect Removed 16 Get Phone Number Options Removed 16 Disconnect Block acess gages waren te eb eee ere aes 16 Abandoned Call Counter Removed 16 Spe
16. age 30 2 30 Condition asyncfail autofail autotim avserr badoperation badparameter calltim carloss ccs7cc chartim cmrhigh cmrlow comfail conn crefer crepeat crepmax cticond ctidown ctifail ctiup ctxcc ctxfailcc ctxokcc cvoice dcdown dcup deadlock delcomp delfail dialtn Conditions Conversion Sheet 2 of 10 3 00 Condition Unsupported detinputfail autotim avserr badoperation badparameter calltim Unsupported ccs7cc getinputfail w Status Errinter field in condition data Unsupported Unsupported comfail answercmp Unsupported Unsupported Unsupported cticond ctidown ctifail ctiup Unsupported Unsupported Unsupported Unsupported Unsupported Unsupported deadlock delcmp delfail Unsupported Conversion detinputfail autotim avserr badoperation badparameter calltim ccs 7cc getinputfail comfail answercmp cticond ctidown ctifail ctiup deadlock delcmp delfail P0605081 Ver 2 3 P0605081 Ver 2 3 2 30 Condition disable disc discfail dtmfzl dupkey dupvalidx enable endfail endfile error ertimeout expired faxdet forcefree forward fromphone frstim ftomfail ftomsucc PeriProducer 3 00 New Features and Enhancements Conditions Conversion Sheet 3 of 10 3 00 Condition Unsupported Conversion Dependent upon event which caused disc condition disc caller hangup disccmp system initiated disconnect dis
17. ak BOCK predane perona a a mae pernce acd eacee ted 17 Speech Recognition Text To Speech 17 Speak a URD sgt Beate ted eat acetate ee 17 Read Phone Block 5 ane dn cinw ay tee tasa ates esas 17 System BOCK 3 5 cib nish Fake nda end nni hte awe Rees 17 Diagnostic Functions Removed 4 17 Condition Data 60 404 8 2an9 is ke AA Ae GA ae 17 Send Host Block esie asena head we boas Meee 17 Virtual Terminal VT Allocation 17 Setting Host Environment Parameters 18 Receive Host Block woes a6 h44 h ose ateweeee a tee wees 18 Asynchronous Operation 0 000 eee eee 18 Send Fax Block Mes unk Gee eee Oat eee ag ER 19 Fax Composition Removed 0000 19 Send Fax from TIFF File 6 433809 28s bee acke apa 19 Fax Mode Removed i5 424 es tiaiiews satesee deus 19 P0605081 Ver 2 3 Page 3 PeriProducer 3 00 Release Notes Receive Fax Block ocs200 xs nerens ie eah we ee aay es 19 Receive Fax Direct into TIFF File 19 Saving to Named Element 19 Local Station ID cohenaceidete ended Hees een as 19 Fax Mode Removed i 2 o0ct ade outa dauniee eae 19 Originate Blocks 325 5084 2 ke e hea eee ae ew En Bes 19 Moved Functions gi eieesteevoa gia wogay tea a 19 Record Block 5 0442 V oye ee saat sinner ih 20 Asynchronous Recording e sees 20 Full Duplex Recording 2 3405 ys ee fel eee eh Sek Seeds 20 Moved Function
18. all Progress Detection block All CPD events return to the application as the cpd condition with the specific event Busy Reorder etc in the condition data See the PeriProducer 3 00 User s Guide for details Page 15 PeriProducer 3 00 Release Notes PeriProducer Block Changes Connection IDs Caller I O blocks Phone line and resource numbers are replaced with Connection IDs CIDs Connection IDs indicate the component name and the line number of the connection For example the CID mps24 1 indicates the connection is from line one on component mps24 The default Connection ID for the current phone line is available in the System folder s DefaultCID data card The CID for an operation is supplied by the system e g when a resource is allocated Accessory Toolkit Blocks The Table Search Table Sort Date Calculations and Send email blocks moved from the main toolkit to the accessory toolkit Answer Block Continue on Ring Detect Removed The Continue on Ring Detect option is removed In general use the Get Call gt Alert Call states to accomplish the same result Get Phone Number Options Removed The Get Dialed Phone Number and Get Caller s Phone Number options are removed Depending on the specific telephony protocol this information is automatically returned by the system for all Answer block actions except Reject Call Disconnect Block Abandoned Call Counter Removed The MPS does not automati
19. cally track system abandoned calls The Mark as abandoned option is removed To track abandoned calls create application statistics and use PeriReporter to display the reports Page 16 P0605081 Ver 2 3 PeriProducer 3 00 New Features and Enhancements Speak Block Speech Recognition Text To Speech All speech recognition and synthesis functions are performed by external resources Refer to the appropriate resource guides for details on using the resource for optimal programming results Speak a URL The element to speak can be specified by a valid URL address e g http server1 prompts greeting 1 wav Read Phone Block The Read Phone Block now handles Speech Recognition Errors and provides a failure path for a recognition error The following recognition errors cause the application to follow the Recognition Error path e Speech Too Early e Too Much Speech e Too Slow Recognition System Block Diagnostic Functions Removed The diagnostics function is removed Condition Data The Get Condition Data function is added This replaces using the condition data call function Get Condition Data requires a folder with the same structure data names and data types expected with the condition see Enhanced Condition Data on page 22 Send Host Block Virtual Terminal VT Allocation VT allocation functions are available from the Send Host block These replace the VT allocation Environment block options P0605
20. cfail w Status field in condition data recordfail w Status ErrZeroLengthDTMF in condition data dupkey dupvalidx Unsupported discfail endfile error disc disc discfail recordfail dupkey dupvalidx endfail endfile error Dependent upon event which caused ertimeout condition ertimeout gen d by VENGINE hrcvmapfail w Status ErrTimeout in condition data failed receive map hrevixtfail w Status ErrTimeout in condition data failed receive text expired faxdet forcefree Unsupported fromphone getinputfail w Status ErrFirst in condition data Unsupported Unsupported ertimeout ertimeout ertimeout expired faxdet forcefree fromphone getinputfail Page 31 PeriProducer 3 00 Release Notes Conditions Conversion Sheet 4 of 10 2 30 Condition 3 00 Condition Conversion getfail Dependent upon event which caused getfail condition gettfail gen d by VENGINE gettail getrsrcfail failed resource getfail get request rcvfaxfail w Status gettail ErrNoFaxAvail in condition data failed receive fax when fax not available sndfaxfail w Status gettail ErrNoFaxAvail in condition data failed send fax when fax not available getvtfail hgetvtfail hgetvifail getvipass hgetvtcmp hgetvicmp gotres Dependent upon event which caused gotres condition getrsrccmp gotres rcvfaxcmp gotres sndfaxcmp gotres green Unsupported hctloff hctloff hctloff het
21. drsrcfail failed send resource speakfail failed speak request Unsupported orberr sndrsrccmp sndrsrcfail origfail w Status ErrlnvalidLineState in condition data origfail w Status ErrBusy in condition data origcmp origfail w Status ErrBusy ErrlnvalidLineState ErrNoAnswer or ErrRejected in condition data origfail w Status ErrNoAnswer in condition data origfail w Status ErrRejected in condition data Unsupported pgid pgml pgun of of of of orberr origfail origfail origcmp outfail origfail origfail pgid pgml pgun Dependent upon event which caused prsfree condition prsfree gen d by VENGINE freersrccmp completed free resource qiderr prsfree prsfree qiderr Page 35 PeriProducer 3 00 Release Notes Conditions Conversion Sheet 8 of 10 2 30 Condition 3 00 Condition Conversion qzero qzero qzero reverr revrsrcfail reverr revnull Dependent upon event which caused rcvnull condition revnull gen d by VENGINE rcvnull hrcvmapfail w Status revnull ErrNoData in condition data failed receive map hrevtxtfail w Status rcevnull ErrNoData in condition data failed receive text rcvoice Unsupported rdcdown Unsupported rdcup Unsupported rdisable Unsupported red Unsupported refbad transferfail w Status transferfail ErrlnvalidLineState in condition data refbeg transfercmp transfercmp refcan disccmp
22. dware Properties Window The Hardware Properties Window is removed Unsupported Resources The following resources are no longer supported in PeriProducer 3 00 mps e abb e asdi e ast e iwr e ppd e modem e mts e iscp e ctx e lcr Obsoleted Functions The Media Operations block in PeriProducer has obsoleted the file to message message to item and message to file functions Page 21 PeriProducer 3 00 Release Notes Other PeriProducer Changes Enhanced Condition Data Condition Data is now returned as a data structure consisting of different field value pairs To access the expanded condition data use the System block s Get Condition Data function and specify the appropriate response folder templates provided in SPPROHOME sample folders To access all of the condition data the folder must have data cards defined as the same name and type as the associated condition data field The data for one field only can be obtained by specifying a datacard whose name matches the desired field pe es The condition data for many conditions have a Status field The Status field value is Le automatically copied into the System folder s ConditionData card Default Text to Speech Resource Specification To specify a default external Text to Speech resource used with implicit resource allocation for all Speak as TTS prompts use the System folder s DefaultTTSRsrc datacard The default value for DefaultTTSRsrc is
23. e icon indicates a warning that serious problems may arise if the stated instructions are improperly followed The flying Window icon identifies procedures or events that apply to the Windows 2000 operating system only The Solaris icon identifies procedures or events that apply to the 1 Solaris operating system only SOLARIS 1 Windows 2000 and the flying Window logo are either trademarks or registered trademarks of the Microsoft Corporation 2 Solaris is a registered trademark of The Open Group in the U S and other countries Solaris and Windows 2000 Conventions This manual depicts examples command line syntax configuration files and screen shots in Solaris format In certain instances Windows 2000 specific commands procedures or screen shots are shown where required The following table lists examples of general operating system conventions to keep in mind when using this manual with either the Solaris or Windows operating system Solaris Windows 2000 Environment SMPSHOME SMPSHOME Paths SMPSHOME common etc SMPSHOME common etc Command lt command gt amp start b lt command gt Page 10 P0605081 Ver 2 3 Preface Two Button Windows 2000 vs Three Button Solaris Mouse lt SELECT gt Left button lt SELECT gt Left button lt ADJUST gt Left and Right lt ADJUST gt Middle button together lt MENU gt Right button lt MENU gt Right button tite caer
24. eir equivalent PeriProducer 3 00 conditions 4 Load and save the PeriProducer 2 30 application Use the PeriProducer Command Line Use the following command line syntax to convert a legacy application peripro c m lt application gt For example to convert numdemo ppr enter peripro c m mpsnumdemo You can also use filename wildcards e g peripro c mpsnum to batch convert applications The example converts all applications in the current directory whose names start with mosnum P0605081 Ver 2 3 Page 45 PeriProducer 3 00 Release Notes Page 46 Conversion Logs The conversion logs are detailed lists of issues encountered during conversion of PeriProducer 2 30 applications to PeriProducer 3 00 The conversion logs are written to the same directory as the source 2 30 application The logs are named conversion_appname txt in plain text format and conversion_appname htm1 in HTML format Each log entry indicates an application function which required some translation to become PeriProducer 3 00 compatible A conversion is divided into three categories 1 Information This indicates something which should not affect the func tionality of the application A typical information message is the conver sion of a 2 30 condition name to a new 3 00 condition name The application will react the same way in PeriProducer 3 00 just using a dif ferent condition name 2 Warning This indicates something which successfu
25. extts b This replaces the Text To Speech Resource setting in the Hardware properties window of PeriProducer 2 30 System Folder Changes e The Constant TTSvoice card is no longer available e The ConfidenceLevel card is no longer available e The following constants are added e None e All e Any e Flush e On e Off e Speech S to identify speech input e DTMF D to identify DTMF input e The following datacards are added e AutoDetectTime e DefaultCID e DefaultOutPool e TransferCID e DefaultTTSRsc e ApplicationNumber replaces LineNumber Page 22 P0605081 Ver 2 3 P0605081 Ver 2 3 PeriProducer 3 00 New Features and Enhancements Environment Options Many PeriProducer 2 30 Environment options have been obsoleted or replaced by new environment options and or block built in functions in PeriProducer 3 00 The following table lists the 2 30 Environment options and the analogous 3 00 option if any Comments are provided where appropriate Environment Options Conversions Sheet 1 of 7 2 30 Environment Option Phone Environment answer bargein bargeinevent edit ekeybd emess eopt eretry first fkeybd fmess fopt fretry ikeybd imess inter iopt iretry keepterm termchar timeout tnabort tnext 3 00 Equivalent Unsupported as environment option Use the Answer block Answer function to answer a call Supported for legacy applications only Unsupported for legacy applicatio
26. icates a system command and or its arguments Such keywords are to be entered exactly as shown i e users are not to fill in their own values Command Condition and Alarm references appear on the screen in magenta text and reference the Command Reference Manual the PeriProducer User s Guide or the Alarm Reference Manual respectively Refer to these documents for detailed information about Commands Conditions and Alarms This font is used for highlighting the names of disk directories files and extensions for file names It is also used to show displays on text based screens e g to show the contents of a file This font is used for field labels on screen menu buttons and action buttons A term that appears within angled brackets denotes a terminal keyboard key a telephone keypad button or a system mouse button Page 9 PeriProducer 3 00 Release Notes Conventions Used in This Manual Sheet 2 of 2 Notation Description Book Reference This font indicates the names of other publications referenced within the document cross reference A cross reference is shown on the screen in blue Click on the cross reference to access the referenced location A cross reference that refers to a section name accesses the first page of that section T lt gt The Note icon identifies notes important facts and other keys to d understanding The Caution icon identifies procedures or events that require special attention Th
27. ication which indicates the source of the input speech or DTMF accordingly P0605081 Ver 2 3 pA eame P0605081 Ver 2 3 PeriProducer 3 00 New Features and Enhancements Play the initial prompts with Accept Input to allow for both DTMF and speech input To allow speech recognition bargein enable the Prompt Interrupt feature click the E button Miscellaneous VRAM Language VRAM is no longer supported Downward Porting of ppr Source Code Source code cannot be ported to previous versions of PeriPro MPS Release Level You must use PeriPro 3 0 on MPS 2 1 or above Page 39 PeriProducer 3 00 Release Notes This page has been intentionally left blank Page 40 P0605081 Ver 2 3 Porting 2 30 Applications to 3 00 This chapter covers 1 Porting PeriProducer 2 30 applications to the 3 00 environment 2 Porting Standard 2 30 Toolkit Applica tions to 3 00 3 Porting MPS Toolkit Applications to 3 00 4 Known Conversion Issues PeriProducer 3 00 Release Notes Porting 2 30 Applications to 3 00 f sa uss hy PeriProducer 3 00 supports legacy PeriProducer 2 30 applications Load the application into PeriProducer and PeriProducer converts the application automatically Before porting the application read through the entire Release Notes to find out what features are not supported have changed and other issues Application Porting Considerations Consider the following when po
28. in 3 00 the env ail condition occurs not the ctrlrsrcfail condition Unsupported 2 30 Resources Several resources from PeriProducer 2 30 are not supported in PeriProducer 3 00 see Unsupported Resources on page 21 When an unsupported resource is encountered during conversion the unsupported resource is reported in the conversion log file In the application the resource is changed from the resource name to Unsupported in the associated Resource block Depending on the resource type you may not be able to use the application with PeriProducer 3 00 Resource Block Conversions The following conversions occur automatically for 2 30 applications which use external resources Resources block e Receive Resource with the resource phonePRS is converted into a Read Phone block e Receive Resource with the resource Ivr X where X is any letter of a valid 2 30 resource is converted into a Read Phone block e Send Resource with the resource phonePRS is converted into a Speak block with the prompt spoken as TTS Literal e Send Resource with the resource extts X where X is any letter of a valid 2 30 resource is converted into a Speak block with the prompt spoken as TTS Literal e If Wait is enabled or a failure connector is available on a 2 30 Resource block Wait is enabled on the 3 00 converted block Page 47 PeriProducer 3 00 Release Notes Page 48 Toa Er To Flushing the Speak Prompt Buffer The PeriPr
29. ll component pprs including the ones below e mpsSpeak1_3 ppr Speak for MPS Toolkit 1 3 e mpsSpeak2_0 ppr Speak for MPS Toolkit 2 0 e mpsMoveConditionDatal_3 ppr MoveConditionData for MPS Toolkit 1 3 directly specified in mpsconvkit1 3 e mpsMoveConditionData2_0 ppr MoveConditionData for MPS Toolkit 2 0 directly specified in mpsconvkit2 0 Replace Previous MPS Toolkit Before converting a legacy MPS Toolkit application replace the previous MPS toolkit with a special conversion toolkit using the pproinfo m 1 3 for MPS Toolkit 1 3 2 0 for MPS Toolkit 2 0 command pproinfo m copies the appropriate conversion toolkit and system folder files to the proper PeriProducer areas Additionally include PPROHOME conv in the PPROPATH so that the replacement MPS toolkit can be loaded under PeriProducer 3 00 PPROPATH should not include a path to the old MPS Toolkit Page 44 P0605081 Ver 2 3 Porting 2 30 Applications to 3 00 Load into PeriProducer 3 00 Perform the following to convert a legacy PeriProducer 2 30 MPS Toolkit 1 3 2 00 application by loading the legacy application into PeriProducer 3 00 1 Identify which version of the MPS Toolkit was used by the PeriPro 2 30 application 2 Replace the old MPS Toolkit see Replace Previous MPS Toolkit on page 44 3 Start PeriProducer with the m option peripro m This option causes the conversion of certain conditions generated by the MPS resource into th
30. lly converted but may not work as expected in 3 00 A typical warning message is for an obsoleted block setting which should not affect application function 3 Severe This indicates something which requires manual application edit ing in order for the application to run under PeriProducer 3 00 Severe messages can include e using features resources no longer supported such as fax composition e obsoleted environment settings conditions system datacards which do not have an equivalent in PeriProducer 3 00 P0605081 Ver 2 3 Porting 2 30 Applications to 3 00 Known Conversion Issues P0605081 Ver 2 3 Set Resource Label in 2 30 PeriProducer 2 30 uses a Resource block Set operation to change the external resource e g OSCAR label PeriProducer 3 00 converts the Resource Set block to an Environment block which sets the RscLabel parameter and enables the Wait option If the Resource set block had the failure connector enabled the Environment block has the failure connector enabled and connects to the same failure path as in the 2 30 application If the 2 30 application explicitly handled the setfail or setres condition for a Resource set instead of using the failure connector you must manually edit the converted application to explicitly handle the envfail or envemp condition The setfail or setres condition in 2 30 automatically converts to ctrlrsrcfail or ctrlrsrccmp in 3 00 If the resource label change fails
31. lon hetlon hetlon heldres Unsupported hkfcomp hookflshcmp hookflshcmp hkffail hookflshfail hookflshfail hostasyncevt hostasyncevt hostasyncevt hostdown hostdown hostdown Page 32 P0605081 Ver 2 3 P0605081 Ver 2 3 2 30 Condition hostfail hostup hstatdata idle inf intertimeout invreq ioerr iscpf isdncc iupdbusy iupdcomp iupdfail lengerr linkdown PeriProducer 3 00 New Features and Enhancements Conditions Conversion Sheet 5 of 10 3 00 Condition Conversion Dependent upon event which caused hostfail condition hrcvmapfail w Status ErrNoData or ErrTimeout in condition data failed to receive map hrevixtfail w Status ErrNoData or ErrTimeout in condition data failed to receive text hsndmapfail failed to send map hsndtxtfail failed to send text hsndaidfail failed to send AID key hostup hstatdata Unsupported hostfail hostfail hostfail hostfail hostfail hostup hstatdata Dependent upon event which caused inf condition inf gen d by VENGINE rcvfaxfail w Status ErrNoFaxAvail in condition data failure to receive fax recordfail w Status ErrZeroLengthDTMEF or ErrZeroLengthSilence in condition data failure to record CMR message intertimeout gend by VENGINE invreq ioerr iscpf Unsupported Unsupported Unsupported Unsupported lengerr linkdown inf inf inf intertimeout invreq ioerr isc
32. ns this is an implied start of speech event Unsupported as environment option Use the Edit Sequence Block to enable disable DTMF input editing Unsupported Unsupported Unsupported Unsupported DtmfFirst Application and System Environment options Unsupported Unsupported Unsupported Unsupported Unsupported Unsupported Dtmflnter Application and System Environment options Unsupported Unsupported Unsupported as environment option Use the Retain option for the termination character in Edit Sequence block Unsupported as environment option Use the Edit Sequence block to enable set a termination character Unsupported Unsupported Unsupported Page 23 PeriProducer 3 00 Release Notes Page 24 Environment Options Conversions Sheet 2 of 7 2 30 Environment Option tnull total trepeat typeahead tzone 3 00 Equivalent Unsupported LineTotalCall Application and System Environment options Unsupported Unsupported Unsupported Phone Line Task Environment autoid backsp busy callref delete eXtext getring noanswer repeat vrepeat xterm Supported for legacy applications only Unsupported as environment option Use the Edit Sequence block to enable set a backspace edit sequence LineStandbyMode set to Busy Application and System Environment options Unsupported Unsupported Unsupported Use the Edit Sequence block to enable set user edit sequences Unsupported as e
33. nvironment option Use the Answer block Get Call and Alert Call functions to continue application processing without answering the line LineStandbyMode set to NoAnswer Application and System Environment options Unsupported Unsupported Unsupported Phone Resource Server Environment prs abeep asetup cdtmf echo idle mdeblock rscconfig smaxlen smaxres Unsupported Unsupported Unsupported Unsupported Unsupported Unsupported Unsupported RscConfig Application and System Environment options Unsupported Unsupported as environment option P0605081 Ver 2 3 PeriProducer 3 00 New Features and Enhancements Environment Options Conversions Sheet 3 of 7 2 30 Environment Option 3 00 Equivalent sminlen Unsupported as environment option srecord Unsupported as environment option tfield Unsupported as environment option tfinal Unsupported as environment option tfirst Unsupported tstop Unsupported as environment option Message Recording Environment firstsil RecFirstSil Application and System Environment options intersil RecinterSil Application and System Environment options maxreclength Unsupported silstrip RecSilStrip Application and System Environment options Call Origination Referral Environment bett Unsupported bcvoc Unsupported brit Unsupported brvoc Unsupported hett Unsupported hcevoc Unsupported hrtt Unsupported hrvoc Unsupported number Unsupported pdial Unsupported reftot Unsupported
34. oducer 2 30 System block Start Reprompt List function flushes the list of previously spoken output This function is still supported in PeriProducer 2 30 However it is recommended that to flush the output list buffer use a Resource block with the Resource field set to Player the CID field set to System DefaultCID the Operation set to Control and the Send From field set to System Constants Flush This suggestion action appears in a 2 30 application s conversion log file System Transfer Connection ID Datacard PeriProducer 3 00 introduces the system datacard TransferCID The system returns the Connection ID CID of line which is used for a transfer operation back to the TransferCID datacard TransferCID should not be used in PeriProducer 3 00 native applications to specify a CID for a transfer operation TransferCID is populated only if the transfer operation is performed synchronously Originate block with Wait enabled If Wait is not enabled TransferCID stays empty During 2 30 to 3 00 conversion PeriProducer may use TransferCID in this capacity to specify a CID instead of receiving a value from the system However this is done only when converting applications Automatic Detection of Speech or DTMF Input AUTOID When converting applications that perform AUTOID automatic detection of speech or DTMF input it is necessary to make sure that the prompt s prior to the environment block s that setup autoid detect timer and
35. orted as environment option Unsupported as environment option Supported for legacy applications only P0605081 Ver 2 3 P0605081 Ver 2 3 PeriProducer 3 00 New Features and Enhancements Environment Options Conversions Sheet 5 of 7 2 30 Environment Option dfirst dinter disc dtmf eline endtone fconnect finish flash gobusy guard indial keyin keyout mftone nansup nofhook rend reortext ringback ringtext rline rvalid sendcp ISDN Environment cats ccode 3 00 Equivalent Unsupported as environment option Unsupported as environment option Unsupported DtmfToneDur Application and System Environment options Unsupported Unsupported Supported for legacy applications only Use the Answer block Answer Call function Unsupported Unsupported Unsupported DtmfGuard Application and System Environment options Unsupported Unsupported Unsupported Unsupported Unsupported Unsupported as environment option Use the Answer block Get Call and Alert Call functions Unsupported Unsupported Unsupported Unsupported Unsupported Unsupported Unsupported Unsupported as environment option Use the Protocol Data fields in the Answer Disconnect Originate and Call Control blocks as appropriate Unsupported as environment option Use the Protocol Data fields in the Answer Disconnect Originate and Call Control blocks as appropriate Page 27 PeriProducer 3 00 Release
36. pf lengerr linkdown Page 33 PeriProducer 3 00 Release Notes Conditions Conversion Sheet 6 of 10 2 30 Condition 3 00 Condition Conversion lockfail lockfail lockfail logdeny logdeny logdeny lost Unsupported marshall mailshall marshall mmfhigh mmfhigh mmfhigh mmflow mmflow mmflow modvar modvar modvar mpscc Unsupported mpsinfo Unsupported mpsoc Unsupported mpsof Unsupported mtoffail exportfail exportfail mtofsucc exportcmp exportcmp nilobjref nilobjref nilobjref nonexistobj nonexistobj nonexistobj norecfound norecfound norecfound norestart norestart norestart nospace nospace nospace notfnd notfnd notfnd notimpl notimpl notimpl notlogon notlogon notlogon notopen notopen notopen oa speakcmp w Status Abort speakcmp in condition data oc Dependent upon event which caused oc condition speakcmp w Status Done oc in condition data completed speak request sndfaxcmp completed send oc fax sndrsrccmp completed oc send resource Page 34 P0605081 Ver 2 3 P0605081 Ver 2 3 2 30 Condition of ofaxdet orberr Oscoc oscof outbad outbsy outcomp outfail outnoa outrej outvoa pgid pgml pgun prsfree qiderr PeriProducer 3 00 New Features and Enhancements Conditions Conversion Sheet 7 of 10 3 00 Condition Conversion Dependent upon event which caused of condition of gen d by VENGINE sndfaxfail w Status ErrNoFaxAvail in condition data failed send fax sn
37. refcan reffail transferfail w Status reffail ErrlnvalidLineState or ErrRejected in condition data refrej transferfail w Status transferfail ErrRejected in condition data reftim calltim reftim renable Unsupported reorder Unsupported resumefail resumefail resumefail rgreen Unsupported ring alertcmp alertcmp rinfail alertfail alertfail rlost Unsupported rngback Unsupported Page 36 P0605081 Ver 2 3 P0605081 Ver 2 3 2 30 Condition rred rscoc rscof rsilence rvoice rxdcdown rxdcup rxdisable ryellow sentcp serverdown setfail setres silence silzl softterm sqlerr sslfail stoptim stpring tcapcc tftprecfail tftprecsucc tftpsendfail tftpsendsucc timeres toomanyrows tophonefail tidata ttdet PeriProducer 3 00 New Features and Enhancements Conditions Conversion Sheet 9 of 10 3 00 Condition Unsupported rscoc rscof Unsupported Unsupported Unsupported Unsupported Unsupported Unsupported sndtonecmp serverdown ctrirsrcfail ctrirsrccmp Unsupported recordfail w Status ErrZeroLengthSilence in condition data softterm sqlerr sslfail Unsupported Unsupported tcapcc tftprecfail tftprecsucc tftpsendfail tftpsendsucc timeres toomanyrows tophonefail getinputcmp ttdet Conversion rSCOCc rscof sndtonecmp serverdown setfail ctrirsrccmp recordfail softterm sqlerr sslfail tcapcc tftprecfail tftprecsucc tftpsendfail tftpsendsucc timeres toomanyrow
38. riProducer User s Guide Intended Audience This manual is intended for application developers of Avaya Media Processing Server MPS using the PeriProducer graphical application development tool A basic understanding of the PeriProducer product as well as attendance in a PeriProducer training course is highly recommended How to Use This Manual Page 8 j f apa A S This manual uses many standard terms relating to computer system software application functions and the Internet However it contains some terminology that can only be explained in the context of the MPS system Refer to the Glossary of Avaya Media Processing Server Terminology for definitions of MPS specific terms Initially you should read this manual at least once from start to finish Later you can use the Table of Contents to locate topics of interest for reference and review If you are reading this document online use the cross reference links shown in blue to quickly locate related topics lt LEFT gt click once with your mouse while positioned with your cursor over the cross reference link Click on any point in a Table of Contents entry to move to that topic Click on the page number of any Index entry to access that topic page To familiarize yourself with various specialized textual references within the manual see Conventions Used in This Manual on page 9 Periphonics is now part of Avaya The name Periphonics and variations thereof
39. rting the legacy application e Make a copy of the source file and port the copy e Back up the source file on another system and or external media e Save the ported copy as a different name like lt original_name gt 300 Porting Standard 2 30 Toolkit Applications to 3 00 Page 42 Applications that used the standard PeriProducer 2 30 toolkit are automatically converted by PeriProducer 3 00 No other setup or configuration procedures are required to convert the 2 30 legacy applications Load into PeriProducer 3 00 Load the legacy application into PeriProducer as you would any other application The conversion takes place automatically The PeriProducer logo will indicate that the application has changed and needs to be saved Use the PeriProducer Command Line Use the following command line syntax to convert a legacy application peripro c lt application gt For example to convert numdemo ppr enter peripro c numdemo You can also use filename wildcards e g peripro c num to batch convert applications The example converts all applications in the current directory whose names start with num P0605081 Ver 2 3 P0605081 Ver 2 3 Porting 2 30 Applications to 3 00 Porting Events During application porting the following events occur Conditions and environment options are converted when possible Refer to Conditions on page 29 and Environment Options on page 23 for conversions Blocks are converted to their neare
40. rvices or information described or offered within them Avaya does not guarantee that these links will work all the time and has no control over the availability of the linked pages Warranty Avaya provides a limited warranty on this product Refer to your sales agreement to establish the terms of the limited warranty In addition Avaya s standard warranty language as well as information regarding support for this product while under warranty is available to Avaya customers and other parties through the Avaya Support Web site http www avaya com support Please note that if you acquired the product from an authorized reseller the warranty is provided to you by said reseller and not by Avaya Licenses THE SOFTWARE LICENSE TERMS AVAILABLE ON THE AVAYA WEBSITE HTTP SUPPORT AVAYA COM LICENSEINFO ARE APPLICABLE TO ANYONE WHO DOWNLOADS USES AND OR INSTALLS AVAYA SOFTWARE PURCHASED FROM AVAYA INC ANY AVAYA AFFILIATE OR AN AUTHORIZED AVAYA RESELLER AS APPLICABLE UNDER A COMMERCIAL AGREEMENT WITH AVAYA OR AN AUTHORIZED AVAYA RESELLER UNLESS OTHERWISE AGREED TO BY AVAYA IN WRITING AVAYA DOES NOT EXTEND THIS LICENSE IF THE SOFTWARE WAS OBTAINED FROM ANYONE OTHER THAN AVAYA AN AVAYA AFFILIATE OR AN AVAYA AUTHORIZED RESELLER AND AVAYA RESERVES THE RIGHT TO TAKE LEGAL ACTION AGAINST YOU AND ANYONE ELSE USING OR SELLING THE SOFTWARE WITHOUT A LICENSE BY INSTALLING DOWNLOADING OR USING THE SOFTWARE OR AUTHORIZING OTHERS TO DO SO YOU ON BEHA
41. s tophonefail getinputcmp ttdet Page 37 PeriProducer 3 00 Release Notes Page 38 Conditions Conversion Sheet 10 of 10 2 30 Condition 3 00 Condition Conversion ttfail getinputfail w Status ttfail ErrFirst in condition data ueditO uedit3 ueditO uedit3 ueditO uedit3 unexdata unexdata unexdata unexhost unexhost unexhost unexphone unexphone unexphone valueperr valueperr valueperr voice Unsupported vrto vrto vrto webfail webfail webfail webtimeout webtimeout webtimeout xdisable Unsupported xmtcomp Unsupported xmtfail Unsupported yellow Unsupported Using MultiMedia Elements Deleting Elements In PeriProducer 3 00 delete MMF elements using the Media Operations block Delete function The System Block Delete MS Token or Vocabulary Item function is still available but does not provide a failure path connector as does the Media Operations block Importing and Exporting Elements In PeriProducer 3 00 import and export MMF elements using the Media Operations block Import and Export functions The associated call functions are still available but using the System block does not provide a failure path connector as does the Media Operations block Receiving Speech Recognition Resource Results If the system uses DTMF detection and speech recognition the application does not need to start autoid and handle detection conditions asrdet ttdet The Read Phone operation passes back a field to the appl
42. s 2 2 a eeecend se ee vee enone ks 20 Recorded Element Destinations 20 Abort Recording using Touch Tones 20 Resource BIOCK 605 41 y on twas Chau Gh asa s 20 Asynchronous Execution Changes 20 Resource Support i4 75 x4ud chee hed eeted boa renns 20 Discontinued Features Functions 0 00 eee ee 21 Fax Composition 0 003 02000 a 0 faerie ees casa eee 21 Hardware Properties Window 200000 21 Unsupported Resources 0 0 0 0 e ee eee eee 21 Obsoleted Functions 2 2 4cii022 422 hte deed ceeds 21 Other PeriProducer Changes lt 2 9135 58 ove hae see eae 22 Enhanced Condition Data 0 0 00 00000 22 Default Text to Speech Resource Specification 22 System Folder Changes 0 0 00 e ee eee 22 Environment Options sssssusasrua neesan thee 23 C ndiHonS saaa a E A T E E Wie eK a S 29 Using MultiMedia Elements 004 38 Deleting Elements ei erectae ro a teed R eee 38 Importing and Exporting Elements 38 Receiving Speech Recognition Resource Results 38 Miscellaneous si 265 34 w ealgiaa ss chia Sea wecae eas 39 VRAM Language cies tnds ied bode nS oe tier es 39 Downward Porting of ppr Source Code 39 MPS Release Level accident curari ren oho ee 8s 39 Porting 2 30 Applications to 3 00 cece eens 41 Porting 2 30 Applications to 3 00 0 000000
43. st possible counterparts in 3 00 Resources are obsoleted The original file is renamed by changing its extension to p2X The PeriPro 2 30 Runtime Behavior option is enabled by default See the PeriProducer User s Guide for information about the 2 30 Runtime Behavior option A file with name beginning with conversionlog_ followed by the application name and with extension txt is created and contains messages pertaining to the conversion process A similar file is created with the extension htm1 and is in HTML format Page 43 PeriProducer 3 00 Release Notes Porting MPS Toolkit Applications to 3 00 Applications that use the MPS Toolkit require procedures to replace the old MPS toolkit with a special conversion toolkit for porting to the PeriProducer 3 00 toolkit These special conversion toolkits are distributed with PeriProducer 3 00 by default MPS Toolkit Replacement There are two replacement versions of MPS Toolkit 1 30 and 2 00 The files are located in PPROHOME conv as follows conv e IMpsfolderl1 3 IMps folder for MPS Toolkit 1 3 e IMpsfolder2 0 IMps folder for MPS Toolkit 2 0 e mpsconvkit1 3 mps pprotoolkit for MPS Toolkit 1 3 e mpsconvkit2 0 mps pprotoolkit for MPS Toolkit 2 0 including conference toolkit components e IMps folder working file e mps pprotoolkit working file mpsContainer ppr for debugging only conv icons e x icon i e all component icons conv pprs e ppr i e a
44. t have distributed the Linux OS source code and identifying the copyright holders of the Third Party Components and the Third Party Terms that apply to them is available on the Avaya Support Web site http support avaya com Copyright Trademarks The trademarks logos and service marks Marks displayed in this site the documentation s and product s provided by Avaya are the registered or unregistered Marks of Avaya its affiliates or other third parties Users are not permitted to use such Marks without prior written consent from Avaya or such third party which may own the Mark Nothing contained in this site the documentation s and product s should be construed as granting by implication estoppel or otherwise any license or right in and to the Marks without the express written permission of Avaya or the applicable third party Avaya is a registered trademark of Avaya Inc All non Avaya trademarks are the property of their respective owners Downloading documents For the most current versions of documentation see the Avaya Support Web site http www avaya com support Contact Avaya Support Avaya provides a telephone number for you to use to report problems or to ask questions about your product The support telephone number is 1 800 242 2121 in the United States For additional support telephone numbers see the Avaya Web site http www avaya com support Table of Contents Table of Contents Preface eneore oid SG vile 8 Ww
Download Pdf Manuals
Related Search