Avaya 70V User's Manual
Contents
1. PEC Code 5330 205 COM Code 408184042 Model LUBIDI70VS Lucent Technologies Bell Labs Innovations Universal Bi Directional 70V Cabinet Speaker The Universal Bi Directional 70V Cabinet Speaker connects to a voice paging system s 70 volt output This speaker can be used as a wall ceiling or corridor speaker ATTENTION This speaker is designed to be used in an office environment Speaker Installation The Universal Cabinet Speaker should be mounted indoors on a suitable flat surface such as a wall or ceiling Note When required the speaker may also be mounted on a pole by using metal banding tape or other suitable material to secure the bracket to the pole Use the bracket as a template and mark a screw location in the center of each keyhole slot Note Ensure that the mounting position allows for easy wire connection and volume adjustments Install screws in the locations marked Use anchors if necessary to provide a solid mounting screws and anchors are provided Leave enough room so the bracket can be slipped over the screw heads Attenuator Control Vol View of Control Area as seen from the opposite i I direction Values shown are in watts Screw l l J N N Maintain proper speaker phasing Each conductor in the speaker wire must be connected to the same terminal on Speaker ee racket each speaker as shown below When using shielded speaker O wire and wiring from speaker to speaker2. wire the shield Speaker Wire Connection IL drains to provide a continuous shield to the next speaker The shield wire should never be terminated on the speaker Note Use 22 AWG shielded twisted pair on all wire runs Com Code 401882956 Pec Code 2734 SPK Issue 1 October 1999 Note Connections shown are for inter 42015 01 Printed in USA 9910 1999 Bogen Communications Inc All rights reserved connected speakers A single speaker Specifications subject to change without notice eo Select Code 701 000 119 does not require outgoing wiring Page 1 of 1 Red screw is Silver screw is
Download Pdf Manuals
Related Search