Avaya Bogen UL Listed (UUMW) Flush-Mounted Loudspeaker Enclosure User's Manual
Contents
1. Assembly Note Four slots provided on each enclosure to mate with four twist tabs on 10 we vis support bridge eliminates need for screws Note All cable splices and connections PER Bae to Speaker Transformer pigtails must be Tabs 8 made inside of Listed enclosure Horseshoe Tabs 4 Ceiling Note Use 22 AWG Shield twisted pair on all wire runs Com Code 401882956 Pec Code 2734 SPK Issue 1 October 1999 Specifications subject to change without notice Compound knockouts provided for metallic UL Listed fittings for 1 2 1999 Bogen Communications Inc All tights reserved and plenum rated cable and plenum whip flex conduit Part No 54 2029 01 Printed In USA 9910 Select Code 701 000 1032. PEC Code 5335 030 COM Code 408184562 Model LURCSE Lucent Technologies Bell Labs Innovations UL Listed UUMW Flush Mounted Loudspeaker Enclosure for Use in Return Air Ceiling Plenum Spaces NOTE Listed by Underwriters Laboratories Inc Category UUMW Material and construction permits use where ceiling plenum is part of the air handling system A listed assembly requires that the enclosed loudspeaker is not exposed within the air handling plenum Wiring and or conduit enclosure entry fittings and installation must comply with local codes Many local codes require a sep arate enclosure assembly tie off wire to be secured to the top of the ceiling cavity OO __ Step 1 Ceiling tile hole Cut an 8 2 square hole using the support bridge as a template Step 2 Bend up the four horseshoe tabs on the support bridge Step 3 Position the support bridge on the tile and bend the eight locator tabs into the tile opening Step 4 Install the UL Listed metallic enclosure entry fitting to the knockout to accommodate quarter inch plenum cable plenum whip or plenum cable Step 5 Install the enclosure to the bridge by orienting the four enclosure slots over the four horseshoe tabs of the bridge Step 6 With pliers twist the four horseshoe tabs on the bridge one half turn securing the enclosure to the bridge Step 7 Install the Speaker Baffle assembly with the four supplied screws See illustration below Speaker Baffle
Download Pdf Manuals
Related Search