Audiovox VOD10PS2 User's Manual
Contents
1. a Using the remote control i to turn on the FM modulator by pressing FMM ON OFF ii Select an FM frequency by pressing FMM Select iii Tune the vehicle radio to the FM frequency selected b Pole ra MENU ENTER Key on the front of the unit Press MENU ENTER ii Use the W down key to highlight FMM press MENU ENTER iii Use the W down or A up key to select FMM ON iv Press MENU ENTER to select FMM ON v To select the frequency press MENU ENTER vi Use the W down key to highlight FMM and press MENU ENTER vii Use the W down key to highlight FMM SELECT and press MENU ENTER viii Use the W down A up right or 4 left keys to select an FM frequency NOTE For best sound quality select an FM Frequency that is not used in the area you will be driving ix Press MENU ENTER to set the FM frequency x Tune your vehicle radio to the frequency just set in the steps above xi Adjust the volume of the vehicle radio to a comfortable listening level QUICK START GUIDE Cont Using the Control Panel To access the Control Panel press the dark gray DISPLAY or dark gray SELECT button The Control Panel Below can be used to navigate the DVD disc Refer to figure below 0123465678 ben h aee gt lee pe 29 Ce lt f i gt gt I D LS A SHUFLEGM Les 1 UIST CULAR Pressing the dark gray DISPLAY or dark gray SELECT button again will cause the Control Panel to change its position on the screen Pressing the DISPLAY or SELECT bu2. WIRED HEADPHONES OPTIONAL There is one 1 8 headphone jack on the unit that can be used with any standard wired stereo headphones with a 1 8 plug This jack is controlled by the volume up down buttons on the remote control or the lt left gt right buttons on the overhead 22 SOURCE FEATURE AV1 The AV1 input may be connected to a external video source video game system or other audio video devices To access the audio video inputs turn the unit on and press the S source button or the Source button on the remote control until AV1 is displayed on the screen Turn the video source component on with its power button or remote control and it is now ready to play the audio and video signals from the source connected NOTE The AV1 source is available only if pre installed during your video product installation AUX The AUX input located on th right side of the unit may be connected to a external video source video game system or other audio video devices To access the audio video inputs turn the unit on and press the S source button or the Source button on the remote control until AUX is displayed on the screen PS2 Press the source button until the screen displays PS2 Press 1 0 RESET on unit remote control to turn ON the PS2 Console 23 TROUBLESHOOTING PROBLEM SOLUTION IR remote inoperative e Verifv that the batteries in the remote are fresh e Verifv that the remote sensor eve
3. DIRECTIONAL BUTTONS CURSOR CONTROL Use these buttons to access the menu selection on the screen P17 L3 BUTTON Displays Subtitle Options to select the subtitle language and or turn it on or off 11 P18 P19 P20 P21 P22 P23 P24 P25 P26 P27 P28 L1 BUTTON Previous M4 press to return to the previous chapter or track L2 BUTTON Search using fast reverse or fast forward playback SELECT Displays the control panel of the PlayStation2 START Press to Play Pause disc playback R2 BUTTON Search using forward playback R1 BUTTON Next bi press to skip to the next chapter or track R3 BUTTON Displays Audio Options press the language changes X BUTTON ENTER O BUTTON CANCEL m Stop MENU Displays the disc menu of DVD Video discs The content of the menu varies from disc to disc RETURN Returns to the previously selected screen within the disc menu of DVD Video discs 12 P29 P30 P31 P32 P33 P34 P35 P36 PAUSE Pauses and resumes plavback STOP Stops plavback PREVIOUS m4 NEXT bil Returns to the beginning of the current or previous chapter Skips to the beginning of the next chapter A B REPEAT Specifies a scene for playback and starts playback of the scene that has been set CLEAR Clears selected numbers or playback modes TIME Displays the current title or chapter number and the elapsed or remaining time NUMBER 0 9
4. P31 P30 P29 P28 P27 P26 P25 P24 P23 P22 P21 REMOTE CONTROL FUNCTIONS The remote control is divided into two sections Dark Gray buttons on the top which control the built in PlayStaion2 and Light Gray buttons on the bottom of the remote control that control the other functions of the unit PLAVSTATION CONTROLS P1 P36 Dark Grav Buttons NOTE PlayStation2 controls refer to the SONY PlayStation2 manual for details P1 OPEN CLOSE Not used on this model P2 AUDIO Displays and changes DVD audio options P3 SHUFFLE Starts playback of titles or chapters in random order P4 ANGLE Displays and changes DVD viewing angle options P5 PROGRAM Displays the Program Setup screen P6 SUBTITLE Displays and changes DVD subtitle options P7 REPEAT Selects repeated playback of all the titles on the disc or one title or chapter 10 P8 SLOW 41 15 Changes to slow motion playback Forward or Reverse P9 SCAN qa e Fast forwards or fast reverses playback on the screen to locate a particular scene P10 PLAY Starts playback P11 DISPLAY Displays the Control Panel of the PlayStation2 P12 TOP MENU Displays the disc menu of DVD Video discs The content varies from disc to disc P13 ABUTTON DVD MENU Selects the item to be changed P14 ENTER Executes the item selected on the DVD disc menu or the on screen Control Panel P15 O BUTTON TITLE MENU Selects the title to be played P16
5. Press the SYSTEM MENU on the remote control the following screen will appear SYSTEM MENU PICTURE CONTROL FMM OSD LANGUAGE SOURCE DEFAULT PS2 SCREEN MODE 2 Use the light gray W down arrow on the remote control to highlight FMM as shown below SYSTEM MENU PICTURE CONTROL FMM OSD LANGUAGE SOURCE DEFAULT PS2 SCREEN MODE 18 3 Press the light gray ENTER button on the remote control and the following screen will appear FMM ON FMM OFF FMM SELECT 4 Use the light gray A up or W down arrow on the remote control to highlight FMM ON and press the light gray ENTER button to turn the FM Modulator on FMM SELECT 1 Repeat steps 1 through 3 above and highlight FMM SELECT 2 Use the light gray W down arrow on the remote control to highlight FMM SELECT and press the ENTER button the following screen will appear FMM SELECT 88 1 MHz 89 7 MHz 88 3 MHz 89 9 MHz 88 5 MHz 90 1 MHz 88 7 MHz 90 3 MHz 88 9 MHz 90 5 MHz 89 1 MHz 90 7 MHz 89 3 MHz 90 9 MHz 89 5 MHz 91 1 MHz 3 Use the light gray A up W down 4 left gt right buttons on the remote control to select a frequency not used by a radio station in the area Press the light gray ENTER button to select the highlighted frequency NOTE The menu will time out after a short period or press the SYSTEM MENU button to turn off the menu 19 OSD LANGUAGE This allows the user to select the language for the on screen displav The user can either
6. The green Rx LED on the PlayStation2 transceiver will illuminate a steady green 15 ON OFF Switch POWER LED MODE LED Sleep Mode START button Your controller will automatically go into Sleep Mode after approximatelv three minutes if not used The MODE LED indicator will go off To reactivate the controller vou have a choice to press the START button or press down on one of the jov sticks on the controller Your controller will automatically synchronize with the receiver in the PS 2 unit Turning Off the Controller Place the ON OFF switch on the controller to OFF if it will not be used for a long period of time to preserve battery life If Your Controller Does Not Synchronize 1 If the red MODE LED indicator on your wireless controller does not activate switch the controller off wait three seconds and switch it back on using the ON OFF switch on the front of the controller 2 If this does not activate the red MODE LED switch the controller back off Turn off your PlayStation2 console and remove the wireless receiver s After this is done reconnect the receivers turn on your PlayStation2 console and turn your controllers back on 3 If this does not activate the red MODE LED check the batteries and replace as needed 4 After checking and or replacing the batteries repeat step 2 for activation Low Power Warning Function Under low battery conditions the MODE LED will flash and
7. Used to select numerical items displayed on the screen STANDBY RESET Used to turn on reset and set the PlayStation2 console in standby mode On Press Once Reset Press for about one second Standby mode Press and Hold down for more than three seconds OVERHEAD MONITOR CONTROLS M1 M11 Light Gray Buttons M1 POWER Press this button to turn the unit ON and OFF 13 M2 M3 MA M5 M6 M7 M8 M9 M10 M11 MUTE Press this button to mute the audio Pressing the button again restores the sound to the previousiv set level FMM ON OFF Turns the wireless FM Modulator ON or OFF SVSTEM MENU Allows the user to access the main svstem menu for picture controls FM Modulator Select screen mode etc FMM SELECT Selects the FM Modulator Frequencv SOURCE Each time the button is pressed the audio video source will change PS2 AV1 and AUX IR ON OFF Turns the Infrared Transmitter power ON OFF for IR Wireless Headphones DISPLAV Press to displav OSD information ENTER Used to execute a selected setting or menu option CURSOR BUTTON AV 4b Use these buttons to access system menu selections on the screen VOLUME PIX Each time this button is pressed the OSD will display the adjustment bars for BRIGHTNESS CONTRAST COLOR or TINT Once the desired adjustment bar is displayed use the buttons to adjust the setting The display will automatically turn off if no adjustm
8. the vibration motors will automatically turn off Vibration Games with the vibration feature will enable the vibration in the controller Vibration can not be disabled Safety Precaution Stop using this unit immediately if you begin to feel tired or if you begin to feel discomfort or pain during use Do not use the vibration function if you have an ailment or injury to the bones joints or muscles of your hands or arms 16 SYSTEM MENU ADJUSTMENT The System Menu contains features and options that let you customize your system to change the screen mode display OSD language and source default N Soong Press the MENU ENTER button on unit to enter System Menu the main page of the system menu will appear on screen Use the cursor buttons A or W to select the desired item in the main page and press the MENU ENTER button to select Items selected in the menu will have a green background The sub menu will appear on screen Use the cursor buttons A or W to select an item in the sub menu and then press the MENU ENTER button to select Use the cursor buttons 4 or gt to adjust picture control and press the MENU ENTER button to confirm setting Press and hold the MENU ENTER button to exit System Menu NOTE System Menu can be controlled via unit and remote control Press the SYSTEM MENU button for access Items selected in the menu will have a green background PICTURE CONTROL REMOTE CONTROL When watching a DVD or playin
9. years of video entertainment in the mobile environment Please read the directions that follow to familiarize yourself with the product to ensure that you obtain the best results from your equipment Please note Installation options vary see the individual owners manuals for each component in your system to obtain a full understanding of each component s operation Safetv Precaution For safetv reasons when changing video media it is recommended that the vehicle is not in motion and that vou do not allow children to unfasten seat belts to change video media or make anv adjustments to the svstem Svstem adjustments can be accomplished using the remote control while seat belts remain fastened Enjov vour AUDIOVOX entertainment svstem but remember the safetv of all passengers remains the number one prioritv FEATURES 10 2 TFT Thin Film Transistor Active Matrix LCD Liquid Crvstal Displav Monitor Built in SONV PlavStation2 game console 2 SONY PlayStation2 Wireless Game Controllers Full Function Remote Control OSD On Screen Displav for Control of Picture Qualitv and Functions Infrared Transmitter for IR Wireless Headphones 2 wireless IR headphones Audio Video Source Inputs PS2 AV1 AUX A V output via RCA pigtail Dome Lights with 3 Position Switch Built in 16 Channel Frequency Wireless FM Modulator Screen Mode Selection 4 3 16 9 Backlit Controls Plays DVD CD and SONY PlayStation2 Games QUICK STAR
10. T GUIDE il 10 Insert batteries into the PlavStation2 game controllers and the remote control Game controller transceivers are preinstalled when the unit is shipped Turn the vehicle on Running this unit on batterv power accessorv kev setting will drain the batterv Press the screen release button to lower the LCD screen Swing the screen back to allow the PlayStation2 to drop down Push the PlayStation2 release button to drop down the PlayStation2 Press the 4 open button on the PlayStation2 to open the PlayStation disc cover Insert a DVD or PlayStation2 game onto the spindle and press gently to seat the disc on the spindle Close the disc cover on the PlayStation2 by pressing down gently on the center of the cover Return the PlayStation2 to its docked position Turn the VOD10PS2 on by pressing the power button NOTE If a blue screen is present press the green RESET key on the remote control or the PlayStation2 If a DVD is played press the PLAY key on the remote control or the X key on the game controller or the Menu Enter key on the front of the overhead unit QUICK START GUIDE Cont 11 When using the wireless headphones install the batteries in each headphone Turn the volume to minimum before turning them on Once thev are turned on place them on vour head pav attention to R L earpieces and slowlv adjust the volume to a comfortable listening level 12 When listening to the svstem over the vehicle radio
11. VOD10PS2 10 2 OVERHEAD LCD MONITOR WITH w E SONY PS2 PLAYER OPERATION MANUAL AUDIOVOX ELECTRONICS CORP 128 8667A Important Notice Installation of overhead products requires careful planning and preparation Be extremelv careful when working on a vehicle with side curtain air bags Do not route wires near any portion of the side curtain air bag assemblies This includes any anchor points in A B C or D pillars of the vehicle Routing wires in these areas or running wires by the side curtain air bags can prevent the side curtain air bag from fullv deploving which can result in personal injurv to vehicle occupants If vou have anv questions regarding wire routing in a vehicle please contact Audiovox Technical Support at 1 800 225 6074 When connecting power and ground in a mobile video installation ensure that the ACC wire is fused at the point where it is connected to the vehicle ACC wiring Failure to do so can result in damage to the vehicle if a short circuit develops between the vehicle connection point and the mobile video product An LOD panel and or video monitor mav be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information system control rear or side observation or navigation If the LCD panel or video monitor is used for television reception video or DVD play the LCD panel or video monitor must b
12. arranties or liabilities ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITH IN A PERIOD NOT EXCEEDING 12 MONTHS AFTER EXPIRATION OF THE WARRANTY IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you This Warranty gives you specific legal rights and you may also have other rights which vary from state to state Audiovox Electronics Corporation 150 Marcus Blvd Hauppauge New York 117881 1 800 645 4994 128 5148F 27 2010 AUDIOVOX 150 Marcus Blvd Hauppauge NY 11788 128 8667A
13. e installed so that these features will only function when the vehicle is in park or when the vehicle s parking brake is applied An LCD panel or video monitor used for television reception video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied must be installed to the rear of the driver s seat where it will not be visible directly or indirectiv to the operator of the motor vehicle Warnings e Do not use any solvents or cleaning materials when cleaning the video monitor e Do not use any abrasive cleaners they may scratch the screen e Use only a lightly dampened lint free cloth to wipe the screen if it is dirty e Lock the LCD screen in the fully closed position when not in use e Before putting on headphones always adjust the volume setting to the lowest position e Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended as the dome lights if left on can drain the vehicle s battery e Do not put pressure on the screen e Caution children to avoid touching or scratching the screen as it may become dirty or damaged Licensed under one or more of the following patents Patent NOS 5 775 762 5 927 784 and 6 678 892 PlayStation 2 is a registered trademark of Sony Corporation Congratulations Congratulations on vour purchase of the AUDIOVOX VOD10PS2 Player with Drop Down Video Monitor The VOD10PS2 has been designed to give you and your family many
14. ents are made after 6 seconds or if any other button is pressed 14 WIRELESS CONTROLLER 2 4GHz Carefully read the information before use For detailed connection and usage methods refer to the Owner s Manual for the PlayStation2 system HOW TO USE Battery Installation The wireless controller uses two AA batteries 1 Turn your controller upside down and remove the lid on the bottom by pressing against the lip and pulling the lid away 2 Insert the batteries as indicated in the controller 3 Once the batteries are inserted put the lid back in its place and cover the batteries Safety Precaution Follow the battery manufacturer s instructions as well as there important safety tips Do not open or mutilate batteries as they might leak dangerous chemicals The wireless transceivers are pre installed in the controller ports on your PlayStation2 system Turning On the Controller 1 Turn on your PlayStation2 system Press the green reset button on the remote control if the PlayStation2 does not come on when the main unit is turned on 2 Place the ON OFF switch for your controller which is located between the dual analog joy sticks to ON The POWER LED will illuminate green 3 Once the controller has been powered on the PlayStation2 will recognize the wireless controller The MODE LED indicator will illuminate red on the wireless controller indicating the connection between the wireless controller and the receiver
15. g a game the picture quality can be adjusted to suit your personal taste Press the SYSTEM MENU button on the remote control the SYSTEM MENU will appear Highlight PICTURE CONTROL using the light gray A or W buttons and press the light gray ENTER button The PICTURE CONTROL menu will appear Use the light gray A or W buttons to highlight the picture control to be changed and press the light gray ENTER button The control setting for that picture control will appear on the screen SYSTEM MENU PICTURE CONTROL 16 CONTRAST PICTURE CONTROL BRIGHTNESS lt FMM CONTRAST D OSD LANGUAGE COLOR SOURCE DEFAULT PS2 TINT SCREEN MODE RESET 17 4 Use light gray lt or gt buttons to change the picture control setting 5 To change another picture control setting press the SYSTEM MENU button and select another picture control using the light gray A or W buttons Repeat step 4 to change the picture control setting 6 Toreset the picture control settings to the factorv default settings enter the picture control menu and use the light grav W button to highlight RESET and press the light grav ENTER button NOTE The light gray PIX control and light gray VOLUME and buttons on the remote control can also be used to adjust the picture control settings When using this method highlight RESET and press the or button to reset the picture controls to factory default settings FMM FMM ON OFF options Turns the wireless FM Modulator on or off 1
16. is not obstructed Disc won t plav e Inserta disc with the label side facing up e Check the type of disc you put into disc tray This PS2 only plays PS2 GAMES DVDs audio CDs e Both the unit and the disc are coded by region If the region codes don t match the disc can t be played e Make sure screen source is set to PS2 Play starts but then stops immediately e The disc is dirty Clean it e Condensation has formed Allow player to dry out No sound or distorted sound e Make sure your DVD is connected properly Make sure all cables are securely inserted into the appropriate jacks e Make sure the Modulator is ON and the Frequency selected on the unit matches the frequency set on the radio e Make sure that unit is using Single Channel Headphones or Dual Channel Headphones set to channel A e For wireless headphones make sure the batteries are fresh Can t advance through a movie It can t advance through the opening credits and warning information that appear at the beginning of movies because the disc is programmed to prohibit that action 24 PROBLEM SOLUTION Not allowed at the moment e The feature or action cannot be completed at this time because 1 The disc s software restricts it 2 The disc s software doesn t support the feature e g angles 3 The feature is not available at the moment 4 4 title or chapter number that is out of range Picture is distor
17. ower button on the unit or the remote control will turn the system on and off When in use the internal backlighting will illuminate the controls After the unit has been turned on and is displaying a picture adjust the viewing angle by pivoting the screen to optimize the picture quality Remember to turn the unit off and pivot the LCD to the locked position when notin use Power ON OFF Remote Sensor Button Infrared Transmitter Screen Release OVERHEAD DOME LIGHTS The Dome Lights integrated into the unit are controlled bv a three position slide switch Sliding the switch to the ON position will turn the lights ON The OFF position will prevent the lights from turning ON with the vehicle s interior lighting and the auto position will allow the lights to turn ON and OFF with the vehicle s interior lighting Refer to the Installation Guide for wire connections Do not leave the vehicle unattended with the dome light switch in the ON position as this could result in a discharged batterv ACCESSORIES WIRELESS HEADPHONES The unit includes a built in infrared transmitter for use with the supplied wireless headphones The headphone volume is adjusted using the controls on each headset Anv number of wireless headphones mav be used but thev must be used within a line of sight from the transmitter as infrared transmissions like visible light travel only in a straight line See the documentation accompanving your wireless headphones
18. plied 11 12 13 14 15 16 LCD Panel Screen Release Press to release the screen LCD Cut Off Switch Used to turn off the LCD backlit when the LCD is in the closed position OPEN Push to open the PlayStation tray OPEN A The disc tray opens RESET 1 0 ON Standbv and RESET indicator CONTROL FUNCTION DESCRIPTION SIDE VIEW 1 2 34 1 HEADPHONE JACK For wired headphone with a 1 8 3 5mm plug 2 Auxiliary Audio Right Input 3 Auxiliary Audio Left Input 4 Auxiliary Video Input REMOTE CONTROL OPERATION Back View o o Le LH Batterv Installation Batterv Cover Before attempting to operate vour Remote Control install the batteries as described below 1 Turn the Remote Control face down Using vour finger slide the batterv cover off in the direction of the arrow 2 Install Two AAA batteries Make sure that proper polaritv or is observed 3 Align the cover tabs with the remote control and slide the cover until it locks The remote control is designed to operate the unit It is not a universal remote control and will not control equipment from other manufacturers MAIN FUNCTION OPERATION OPEN CLOSE RESET La Vo AUDIO SHUFFLE DVD PLAYSTATION P34 P33 P32
19. rs under normal use and conditions be proven defective in material or workmanship within 36 months from the date of original purchase such defect s will be repaired or replaced with reconditioned product at the Company s option without charge for parts and repair labor A game controller if supplied is similarly warranted for 90 days To obtain repair or replacement within the terms of this Warranty the product is to be delivered with proof of warranty coverage e g dated bill of sale specification of defect s transportation prepaid to the Company at the address shown below This Warranty does not extend to the elimination of externally generated static or noise to correction of antenna problems to costs incurred for installation removal or reinstallation of the product or to damage to digital memory media devices gaming devices discs speakers accessories or vehicle electrical systems This Warranty does not apply to any product or part thereof which in the opinion of the Company has suffered or been damaged through alteration improper installation mishandling misuse neglect accident or by removal or defacement of the factory serial number bar code label s THE EXTENT OF THE COMPANY S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND IN NO EVENT SHALL THE COMPANY S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT This Warranty is in lieu of all other express w
20. select English Spanish French German for the OSD language OSD LANGUAGE PICTURE CONTROL ENGLISH FMM gt SPANISH OSD LANGUAGE FRENCH SOURCE DEFAULT PS2 GERMAN SCREEN MODE SOURCE DEFAULT PS2 This allows the user to set the system default source to PS2 via System Menu NOTE e If selected default source is set to PS2 every time the unit s power is cycled with the source set to something other then PS2 the unit will power up and automatically switch the source over to PS2 e Unit will be set to Last Source on as the default mode of operation e Selection of Source default can only be made from within the system menu SYSTEM MENU SOURCE DEFAULT PS2 PICTURE CONTROL FMM OSD LANGUAGE SOURCE DEFAULT PS2 SCREEN MODE SCREEN MODE This allows the user to change the screen format aspect ratio 4 3 16 9 To select the screen aspect ratio format highlight SCREEN MODE and press MENU ENTER button to enter the submenu Then press the Cursor button A or W to select from 4 3 or 16 9 Press MENU ENTER button to confirm the setting SYSTEM MENU PICTURE CONTROL FMM OSD LANGUAGE SOURCE DEFAULT PS2 SCREEN MODE TURNING THE UNIT ON OR OFF 1 Pushing in the Screen Release button will unlock the LCD screen and itwill drop down slightly Pivot the screen downward until a comfortable viewing angle is reached The hinge friction will hold the screen in position while the systemis in use Pressing the p
21. ted e The disc might be damaged Trv another disc e Itis normal for some distortion to appear during forward or reverse scan No forward or reverse scan e Some discs have sections that prohibit rapid scanning or title and chapter skip e f you try to skip through the warning information and credits at the beginning of a movie vou won t be able to This part of the movie is often programmed to prohibit skipping through it Service and Repair Warranty on all components in this system VOD10PS2 Remote Control Game Controllers and built in Sony PlayStation2 is handled bv Audiovox Electronics Corporation For service call 1 800 225 6074 25 REPLACEMENT PARTS Remote Control Wireless Controller 136 4926 136 5007 26 SPECIFICATIONS LCD Backlighting LED Resolution 800 RGB x 480 Pixels 1 152 000 Operation Temperature 32 131 F 0 50 C Storage Temperature 4 158 F 20 70 C Backlit life 10 000 Hours Video Display System NTSC PAL Headphone Audio Output 0 03W 32 ohms Video Output 1 0Vp p 75 ohms Power Source 12V DC Dimension LxWxH 12 x 12 x 2 5 315mm x 315mm x 64 5mm Specifications subject to change without notice Applies to Audiovox Mobile Video Products AUDIOVOX LIMITED WARRANTV A AUDIOVOX AUDIOVOX ELECTRONICS CORP the Company warrants to the original retail purchaser of this product that should this product or any part thereof except game controlle
22. tton a third time will turn off the Control Panel Use the dark directional buttons W A gt 4 to select an icon When the desired icon is selected press the X button NOTE The Control Panel may appear at the end of some DVD movies For complete instructions regarding the functions provided by the Control Panel refer to the PlayStation2 User s Guide CONTROLS AND INDICATORS DIAGRAM FRONT VIEW 1 SOURCE Button S Use to select the sources PS2 AV1 andAUX CURSOR Buttons A V lt gt Use these buttons to access menu selections on the screen MENU ENTER Button Use this button to access SYSTEM MENU and select system menu items Infrared Transmitter and Sensor Transmits audio to wireless headphones allows the remote control to operate the unit and to control other accessories in the system POWER Button l Used to turn the system on off standby Dome Lights Provide additional interior illumination Three Position Dome Light Switch ON Turns on the dome lights Do not leave switch on when vehicle is off OFF The dome lights will not turn on in this position AUTO Automatically switches on the dome lights in conjunction with the vehicle s interior illumination PlayStation2 CONSOLE MEMORY CARD SLOT 1 amp MEMORY CARD SLOT 2 Memory Cards not supplied 10 PS2 WIRELESS CONTROLLER TRANSCEIVERS Transceivers sup
Download Pdf Manuals
Related Search