Audiovox HF505 User's Manual
Contents
1. press EO ED C O Then press 4 or to raise or lower the volume level Note Your handset must be connected with handsfree adaptor to adjust volume level outlined in the above item 2 Keypad Disable Function in Handsfree Mode Programmable Option This function prevents accidental or unintentional use of the keypad in handsfree mode When this function is activated by Programmable option no key opera tions in handsfree mode are possible The display shows Keypad Dis able each time your phone is turned on Note Even in Keypad disable mode your phone will receive calls normally To Temporarily Release Keypad Disable Mode Press and hold and simultaneously Keypad Disable will disappear To Return to Keypad Disable Mode Press and hold and simultaneously again Keypad Disable will be displayed Note When handsfree curly cord is disconnected from your hand set key operations become possible and Keypad Disable disappears2. gt AUDIOVOX LOITUTHMULTUONS LOP HANDSFREE ADAPTOR HF505 OPERATION GUIDE FEATURES e Handset will easily attach or detach from handsfree adaptor e Handsfree function with the use of loudspeaker and external microphone Continuous battery charging capability Loudspeaker s volume can be changed by using the control on your phone INSTALLATION The installation method is as follows Press this button to remove the Handset Unit Handset Unit Black To GROUND Orange To IGNITION RED To BATTERY 288E8210 HANDSFREE OPERATION Power Switch Operation When the ignition key is on push the Power switch on the Handsfree Adaptor and set it to the IN Position to turn your handset on Press the switch again to set it to the OUT Position to turn your handset off When the Power switch on the Handsfree Adaptor is left in the IN Posi tion and the ignition key is turned on your handset will be powered up When the ignition key is turned off your handset will be powered off The power of your phone will also be controlled with the power switch on your handset Note Power key of your handset will not operate when your hand set is placed in the cradle Handsfree Calling 1 To place a call handsfree enter a telephone number and press CEND 2 When the called party answers proceed with the call as usual but leave the handset in its cradle and use the external microphone and loud speaker 3 To terminate you
3. r call press CEND Handsfree Answering I To answer a call handsfree press any key except Gv or CENDD 2 Proceed with answering your call as usual but leave the handset in its cradle and use the external microphone and the loudspeaker 3 To terminate your call press CEND Handsfree to Handset Switching i To switch over to handset operation while in handsfree mode remove your handset from its cradle 2 Proceed with the conversation using your handset 3 To terminate your call press CEND gt Handset to Handsfree Switching 1 To switch over to Handsfree communication while using your hand set replace your handset in its cradle 2 Proceed with the conversation using the external microphone and the loudspeaker 3 To terminate your call press CEND Note It is recommended that you try to reduce interior vehicle noise as much as possible such as by limiting the volume levels of any audio equipment by selecting a low fan speed on the vehicle s heater or air conditioner or by rolling up the windows Call in Progress Protection Even if the Power switch or the ignition key is turned off during conversa tion your connection will remain uninterrupted and you may proceed with the call as usual Handsfree Speaker Volume Adjustment 1 To change the speaker volume during handsfree operation while in conversation press 4 or 2 To change the volume level of the handsfree speaker while not in use
Download Pdf Manuals
Related Search